source: trunk/boot/tsar_mips32/boot.c @ 535

Last change on this file since 535 was 535, checked in by nicolas.van.phan@…, 6 years ago

Replace TXT0 by MTTY0 for LETI

File size: 39.6 KB
RevLine 
[439]1/*
2 * boot.c - TSAR bootloader implementation.
3 *
4 * Authors :   Alain Greiner / Vu Son  (2016)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24/****************************************************************************
25 * This file contains the ALMOS-MKH. boot-loader for the TSAR architecture. *
26 *                                                                          *
27 * It supports clusterised shared memory multi-processor architectures,     *
28 * where each processor core is identified by a composite index [cxy,lid]   *
29 * with one physical memory bank per cluster.                               *
30 *                                                                          *
31 * The 'boot.elf' file (containing the boot-loader binary code) is stored   *
32 * on disk and is loaded into memory by core[0,0] (cxy = 0 / lid = 0),      *
33 * and is copied in each other cluter by the local CP0 (lid = 0].           *
34 *                                                                          *
35 * 1) The boot-loader first phase is executed by core[0,0], while           *
36 *    all other cores are waiting in the preloader.                         *
37 *    It does the following tasks:                                          *
38 *      - load into the memory bank of cluster 0 the 'arch_info.bin'        *
39 *        file (containing the hardware architecture description) and the   *
40 *        'kernel.elf' file, at temporary locations,                        *   
41 *      - initializes the 'boot_info_t' structure in cluster(0,0)           *
42 *        (there is 1 'boot_info_t' per cluster), which contains both       *
43 *        global and cluster specific information that will be used for     *
44 *        kernel initialisation.                                            *
45 *      - activate CP0s in all other clusters, using IPIs.                  *
46 *      - wait completion reports from CP0s on a global barrier.            *
47 *                                                                          *
48 * 2) The boot-loader second phase is then executed in parallel by all      *
49 *    CP0s (other than core[0,0]). Each CP0 performs the following tasks:   *
50 *      - copies into the memory bank of the local cluster the 'boot.elf',  *
51 *        the 'arch_info.bin' (at the same addresses as the 'boot.elf' and  *
52 *        the 'arch_info.bin' in the memory bank of the cluster(0,0), and   *
53 *        the kernel image (at address 0x0),                                *
54 *      - initializes the 'boot_info_t' structure of the local cluster,     *
55 *      - activate all other cores in the same cluster (CPi).               *
56 *      - wait local CPi completion reports on a local barrier.             *
57 *      - report completion to bscpu on the global barrier.                 *
58 *                                                                          *
59 * 3) The boot-loader third phase is executed in parallel by all cores.     *
60 *    After passing the global barrier the bscpu:                           *
61 *      - activates the CPi of cluster(0),                                  *
62 *      - blocks on the local barrier waiting for all local CPi to report   *
63 *        completion on the local barrier,                                  *
64 *      - moves the local kernel image from the temporary location to the   *
65 *        address 0x0, (erasing the preloader code).                        *
66 *                                                                          *
67 * 4) All cores have finished the boot phase, they jump to the kern_init()  *
68 *    function (maybe not at the same time).                                *
69 ****************************************************************************/
70
71#include <elf-types.h>
[457]72#include <hal_kernel_types.h>
[439]73
74#include <kernel_config.h>
75#include <boot_config.h>
76
77#include <arch_info.h>
78#include <boot_info.h>
79
80#include <boot_utils.h>
81#include <boot_fat32.h>
82#include <boot_bdv_driver.h>
83#include <boot_hba_driver.h>
84#include <boot_tty_driver.h>
85
86/*****************************************************************************
87 *                                 Macros.                             
88 ****************************************************************************/
89
90#define PAGE_ROUND_DOWN(x)  ((x) & (~PPM_PAGE_SIZE -1))
91#define PAGE_ROUND_UP(x)    (((x) + PPM_PAGE_SIZE-1) &   \
92                            (~(PPM_PAGE_SIZE-1)))
93
94/*****************************************************************************
95 *                             Global variables.                           
96 ****************************************************************************/
97
98// synchronization variables.
99
100volatile boot_remote_spinlock_t tty0_lock;       // protect TTY0 access
101volatile boot_remote_barrier_t  global_barrier;  // synchronize CP0 cores
102volatile boot_remote_barrier_t  local_barrier;   // synchronize cores in one cluster
103uint32_t                        active_cp0s_nr;  // number of expected CP0s
104 
105// kernel segments layout variables
106
107uint32_t                        seg_kcode_base;   // kcode segment base address
108uint32_t                        seg_kcode_size;   // kcode segment size (bytes)
109uint32_t                        seg_kdata_base;   // kdata segment base address
110uint32_t                        seg_kdata_size;   // kdata segment size (bytes)
111uint32_t                        seg_kentry_base;  // kcode segment base address
112uint32_t                        seg_kentry_size;  // kcode segment size (bytes)
113
114uint32_t                        kernel_entry;    // kernel entry point
115
116// address used by the WTI to activate remote CP0s
117
[524]118// Functions called by boot_entry.S must be externs.
119extern void boot_entry( void );    // boot_loader entry point
120extern void boot_loader( lid_t lid, cxy_t cxy );
[439]121
122/*********************************************************************************
123 * This function returns the printable string for each device type
124 ********************************************************************************/
[534]125static const char * device_type_str( boot_device_types_t dev_type ) {
126    switch (dev_type) {
127        case DEV_TYPE_RAM_SCL: return "RAM_SCL";
128        case DEV_TYPE_ROM_SCL: return "ROM_SCL";
129        case DEV_TYPE_FBF_SCL: return "FBF_SCL";
130        case DEV_TYPE_IOB_TSR: return "IOB_TSR";
131        case DEV_TYPE_IOC_BDV: return "IOC_BDV";
132        case DEV_TYPE_IOC_HBA: return "IOC_HBA";
133        case DEV_TYPE_IOC_SDC: return "IOC_SDC";
134        case DEV_TYPE_IOC_SPI: return "IOC_SPI";
135        case DEV_TYPE_IOC_RDK: return "IOC_RDK";
136        case DEV_TYPE_MMC_TSR: return "MMC_TSR";
137        case DEV_TYPE_DMA_SCL: return "DMA_SCL";
138        case DEV_TYPE_NIC_CBF: return "NIC_CBF";
139        case DEV_TYPE_TIM_SCL: return "TIM_SCL";
140        case DEV_TYPE_TXT_TTY: return "TXT_TTY";
141        case DEV_TYPE_ICU_XCU: return "ICU_XCU";
142        case DEV_TYPE_PIC_TSR: return "PIC_TSR";
143        default:               return "undefined";
144    }
[439]145}
146
147/************************************************************************************
148 * This function loads the arch_info.bin file into the boot cluster memory.
149 ***********************************************************************************/
[474]150static void boot_archinfo_load( void )
[439]151{
152    archinfo_header_t* header = (archinfo_header_t*)ARCHINFO_BASE; 
153   
154    // Load file into memory
155    if (boot_fat32_load(ARCHINFO_PATHNAME, ARCHINFO_BASE, ARCHINFO_MAX_SIZE))
156    {
157        boot_printf("\n[BOOT ERROR]: boot_archinfo_load(): "
158                    "<%s> file not found\n",
159                    ARCHINFO_PATHNAME);
160        boot_exit();
161    }
162
163    if (header->signature != ARCHINFO_SIGNATURE)
164    {
165        boot_printf("\n[BOOT_ERROR]: boot_archinfo_load(): "
166                    "<%s> file signature should be %x\n",
167                    ARCHINFO_PATHNAME, ARCHINFO_SIGNATURE);
168        boot_exit();
169    }
170
171#if DEBUG_BOOT_INFO
172boot_printf("\n[BOOT INFO] in %s : file %s loaded at address = %x\n",
173            __FUNCTION__ , ARCHINFO_PATHNAME , ARCHINFO_BASE );
174#endif
175
176} // boot_archinfo_load()
177
178/**************************************************************************************
179 * This function loads the 'kernel.elf' file into the boot cluster memory buffer,
180 * analyzes it, and places the three kcode, kentry, kdata segments at their final
181 * physical adresses (defined the .elf file).       
182 * It set the global variables defining the kernel layout.
183 *************************************************************************************/
[474]184static void boot_kernel_load( void )
[439]185{
186    Elf32_Ehdr * elf_header;      // pointer on kernel.elf header. 
187    Elf32_Phdr * program_header;  // pointer on kernel.elf program header.
188    uint32_t     phdr_offset;     // program header offset in kernel.elf file.
189    uint32_t     segments_nb;     // number of segments in kernel.elf file.
190    uint32_t     seg_src_addr;    // segment address in kernel.elf file (source).
191    uint32_t     seg_paddr;       // segment local physical address of segment
192    uint32_t     seg_offset;      // segment offset in kernel.elf file
193    uint32_t     seg_filesz;      // segment size (bytes) in kernel.elf file
194    uint32_t     seg_memsz;       // segment size (bytes) in memory image.
195    bool_t       kcode_found;     // kcode segment found.
196    bool_t       kdata_found;     // kdata segment found.
197    bool_t       kentry_found;    // kentry segment found.
198    uint32_t     seg_id;          // iterator for segments loop.
199
200#if DEBUG_BOOT_ELF
201boot_printf("\n[BOOT INFO] %s enters for file %s at cycle %d\n",
202            __FUNCTION__ , KERNEL_PATHNAME , boot_get_proctime() );
203#endif
204
205    // Load kernel.elf file into memory buffer
206    if ( boot_fat32_load(KERNEL_PATHNAME, KERN_BASE, KERN_MAX_SIZE) )
207    {
208        boot_printf("\n[BOOT ERROR] in %s : <%s> file not found\n",
209                    KERNEL_PATHNAME);
210        boot_exit();
211    }
212
213    // get pointer to kernel.elf header 
214    elf_header = (Elf32_Ehdr*)KERN_BASE;
215
216    // check signature
217    if ((elf_header->e_ident[EI_MAG0] != ELFMAG0)   ||
218        (elf_header->e_ident[EI_MAG1] != ELFMAG1)   ||
219        (elf_header->e_ident[EI_MAG2] != ELFMAG2)   ||
220        (elf_header->e_ident[EI_MAG3] != ELFMAG3))
221    {
222        boot_printf("\n[BOOT_ERROR]: boot_kernel_load(): "
223                    "<%s> is not an ELF file\n",
224                    KERNEL_PATHNAME);
225        boot_exit();
226    }
227
228    // Get program header table offset and number of segments
229    phdr_offset     = elf_header->e_phoff;
230    segments_nb     = elf_header->e_phnum;
231
232    // Get program header table pointer
233    program_header  = (Elf32_Phdr*)(KERN_BASE + phdr_offset);
234
235    // loop on segments
236    kcode_found  = false;
237    kdata_found  = false;
238    kentry_found = false;
239    for (seg_id = 0; seg_id < segments_nb; seg_id++) 
240    {
241        if (program_header[seg_id].p_type == PT_LOAD)   // Found one loadable segment
242        {
243            // Get segment attributes.
244            seg_paddr    = program_header[seg_id].p_paddr;   
245            seg_offset   = program_header[seg_id].p_offset;
246            seg_filesz   = program_header[seg_id].p_filesz;
247            seg_memsz    = program_header[seg_id].p_memsz;
248
249            // get segment base address in buffer
250            seg_src_addr = (uint32_t)KERN_BASE + seg_offset;
251
252            // Load segment to its final physical memory address
253            boot_memcpy( (void*)seg_paddr, 
254                         (void*)seg_src_addr, 
255                         seg_filesz );
256
257#if DEBUG_BOOT_ELF
258boot_printf("\n[BOOT INFO] in %s for file %s : found loadable segment\n"
259            "   base = %x / size = %x\n",
260            __FUNCTION__ , KERNEL_PATHNAME , seg_paddr , seg_memsz );
261#endif
262
263            // Fill remaining memory with zero if (filesz < memsz).
264            if( seg_memsz < seg_filesz )
265            {
266                boot_memset( (void*)(seg_paddr + seg_filesz), 0, seg_memsz - seg_filesz);
267            }
268
269            // Note: we suppose that the 'kernel.elf' file contains exactly
270            // three loadable segments ktext, kentry, & kdata:
271            // - the kcode segment is read-only and base == KCODE_BASE
272            // - the kentry segment is read-only and base == KENTRY_BASE
273
274            if( ((program_header[seg_id].p_flags & PF_W) == 0) &&
275                 (program_header[seg_id].p_paddr == KCODE_BASE) )     // kcode segment
276            {
277                if( kcode_found )
278                {
279                    boot_printf("\n[BOOT_ERROR] in %s for file %s :\n"
280                                "   two kcode segments found\n",
281                                __FUNCTION__ , KERNEL_PATHNAME );
282                    boot_exit();
283                } 
284
285                kcode_found     = true;
286                seg_kcode_base = seg_paddr;
287                seg_kcode_size = seg_memsz;
288            }
289            else if( program_header[seg_id].p_paddr == KENTRY_BASE ) // kentry segment
290            {
291                if( kentry_found )
292                {
293                    boot_printf("\n[BOOT_ERROR] in %s for file %s :\n"
294                                "   two kentry segments found\n",
295                                __FUNCTION__ , KERNEL_PATHNAME );
296                    boot_exit();
297                } 
298
299                kentry_found     = true;
300                seg_kentry_base = seg_paddr;
301                seg_kentry_size = seg_memsz;
302            }
303            else                                                    // kdata segment
304            {
305                if( kdata_found )
306                {
307                    boot_printf("\n[BOOT_ERROR] in %s for file %s :\n"
308                                "   two loadable kdata segments found\n",
309                                __FUNCTION__ , KERNEL_PATHNAME );
310                    boot_exit();
311                } 
312
313                kdata_found     = true;
314                seg_kdata_base = seg_paddr;
315                seg_kdata_size = seg_memsz;
316            }
317        }
318    }
319
320    // check kcode & kdata segments found
321    if( kcode_found == false )
322    {
323        boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kcode not found\n",
324                    __FUNCTION__ , KERNEL_PATHNAME );
325        boot_exit();
326    }
327    if( kentry_found == false )
328    {
329        boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kentry not found\n",
330                    __FUNCTION__ , KERNEL_PATHNAME );
331        boot_exit();
332    }
333    if( kdata_found == false )
334    {
335        boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kdata not found\n",
336                    __FUNCTION__ , KERNEL_PATHNAME );
337        boot_exit();
338    }
339
340    // check segments sizes
341    if( seg_kentry_size > KENTRY_MAX_SIZE )
342    {
343        boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kentry too large\n",
344                    __FUNCTION__ , KERNEL_PATHNAME );
345        boot_exit();
346    }
347
348    if( (seg_kcode_size + seg_kdata_size) > KCODE_MAX_SIZE )
349    {
350        boot_printf("\n[BOOT_ERROR] in %s for file %s : seg_kcode + seg_kdata too large\n",
351                    __FUNCTION__ , KERNEL_PATHNAME );
352    }
353
354    // set entry point
355    kernel_entry = (uint32_t)elf_header->e_entry;
356
357#if DEBUG_BOOT_ELF
358boot_printf("\n[BOOT INFO] %s completed for file %s at cycle %d\n",
359            __FUNCTION__ , KERNEL_PATHNAME , boot_get_proctime() );
360#endif
361
362} // boot_kernel_load()
363
364/*************************************************************************************
365 * This function initializes the  boot_info_t structure for a given cluster.
366 * @ boot_info  : pointer to local boot_info_t structure 
367 * @ cxy        : cluster identifier                   
368 ************************************************************************************/
369static void boot_info_init( boot_info_t * boot_info,
370                            cxy_t         cxy )
371{
372    archinfo_header_t  * header;
373    archinfo_core_t    * core_base;     
374    archinfo_cluster_t * cluster_base; 
375    archinfo_device_t  * device_base;
376    archinfo_irq_t     * irq_base; 
377
378    archinfo_cluster_t * cluster; 
379    archinfo_cluster_t * my_cluster = NULL;   // target cluster
380    archinfo_cluster_t * io_cluster = NULL;   // cluster containing ext. peripherals
381
382    archinfo_core_t    * core;
383    uint32_t             core_id; 
384    archinfo_device_t  * device;
385    uint32_t             device_id;
386    archinfo_irq_t     * irq; 
387    uint32_t             irq_id;
388    uint32_t             end;
389    boot_device_t      * boot_dev; 
390
391    // get pointer on ARCHINFO header  and on the four arch_info arrays
392    header       = (archinfo_header_t*)ARCHINFO_BASE;
393    core_base    = archinfo_get_core_base   (header);
394    cluster_base = archinfo_get_cluster_base(header);
395    device_base  = archinfo_get_device_base (header);
396    irq_base     = archinfo_get_irq_base    (header);
397
398    // Initialize global platform parameters
399    boot_info->x_size       = header->x_size;
400    boot_info->y_size       = header->y_size;
401    boot_info->x_width      = header->x_width;
402    boot_info->y_width      = header->y_width;
[530]403    boot_info->x_max        = header->x_size; // [FIXME]
404    boot_info->y_max        = header->name[5] == 'l' ? header->y_size - 1 : header->y_size; // [FIXME]
[535]405    boot_info->use_mty0     = header->name[5] == 'l' ? true : false;
[439]406    boot_info->paddr_width  = header->paddr_width;
407    boot_info->io_cxy       = header->io_cxy;
408
409    // Initialize kernel segments from global variables
410    boot_info->kcode_base  = seg_kcode_base;
411    boot_info->kcode_size  = seg_kcode_size;
412    boot_info->kdata_base  = seg_kdata_base;
413    boot_info->kdata_size  = seg_kdata_size;
414    boot_info->kentry_base = seg_kentry_base;
415    boot_info->kentry_size = seg_kentry_size;
416
417    // loop on arch_info clusters to get relevant pointers
418    for (cluster =  cluster_base;
419         cluster < &cluster_base[header->x_size * header->y_size];
420         cluster++)
421    {
422        if( cluster->cxy  == cxy )            my_cluster = cluster;
423        if( cluster->cxy  == header->io_cxy ) io_cluster = cluster;
424    }
425
426    if( my_cluster == NULL ) 
427    {
428        boot_printf("\n[ERROR] in %s : cannot found cluster %x in arch_info\n",
429                    __FUNCTION__ , cxy );
430        boot_exit();
431    }
432
433    if( io_cluster == NULL ) 
434    {
435        boot_printf("\n[ERROR] in %s : cannot found io_cluster %x in arch_info\n",
436                    __FUNCTION__ , header->io_cxy );
437        boot_exit();
438    }
439
440    //////////////////////////////////////////////////////////
441    // initialize the boot_info array of external peripherals
442
443#if DEBUG_BOOT_INFO
444boot_printf("\n[BOOT INFO] %s : external peripherals at cycle %d\n",
445            __FUNCTION__ , boot_get_proctime() );
446#endif
447
448    device_id = 0;
449    for (device = &device_base[io_cluster->device_offset];
450         device < &device_base[io_cluster->device_offset + io_cluster->devices];
451         device++ )
452    {
453        if( device_id >= CONFIG_MAX_EXT_DEV ) 
454        {
455            boot_printf("\n[ERROR] in %s : too much external devices in arch_info\n",
456                        __FUNCTION__ );
457            boot_exit();
458        }
459       
460        // keep only external devices
461        if( (device->type != DEV_TYPE_RAM_SCL) &&
462            (device->type != DEV_TYPE_ICU_XCU) &&
463            (device->type != DEV_TYPE_MMC_TSR) &&
464            (device->type != DEV_TYPE_DMA_SCL) ) 
465        {
466            boot_dev = &boot_info->ext_dev[device_id];
467
468            boot_dev->type     = device->type;
469            boot_dev->base     = device->base;
470            boot_dev->channels = device->channels;
471            boot_dev->param0   = device->arg0;   
472            boot_dev->param1   = device->arg1;   
473            boot_dev->param2   = device->arg2;   
474            boot_dev->param3   = device->arg3;   
475            boot_dev->irqs     = device->irqs;   
476
477            device_id++;
478
479#if DEBUG_BOOT_INFO
480boot_printf("  - %s : base = %l / size = %l / channels = %d / irqs = %d\n",
481            device_type_str( device->type ) , device->base , device->size ,
482            device->channels , device->irqs );   
483#endif
484        }
485   
486        // handle IRQs for PIC
487        if (device->type == DEV_TYPE_PIC_TSR) 
488        {
489            for (irq_id = 0; irq_id < CONFIG_MAX_EXTERNAL_IRQS ; irq_id++)
490            {
491                boot_dev->irq[irq_id].valid  = 0;
492            }
493
494            for (irq = &irq_base[device->irq_offset];
495                 irq < &irq_base[device->irq_offset + device->irqs];
496                 irq++)
497            {
498                boot_dev->irq[irq->port].valid    = 1;
499                boot_dev->irq[irq->port].dev_type = irq->dev_type;
500                boot_dev->irq[irq->port].channel  = irq->channel;
501                boot_dev->irq[irq->port].is_rx    = irq->is_rx;
502
503#if DEBUG_BOOT_INFO
504boot_printf("    . irq_port = %d / source = %s / channel = %d / is_rx = %d\n",
505            irq->port , device_type_str( irq->dev_type ) , irq->channel , irq->is_rx );
506#endif
507            }
508        }
509    }   // end loop on io_cluster peripherals
510
511    // initialize number of external peripherals
512    boot_info->ext_dev_nr = device_id;
513
514    // Initialize cluster specific resources
515    boot_info->cxy  = my_cluster->cxy;
516
517#if DEBUG_BOOT_INFO
518boot_printf("\n[BOOT INFO] %s : cores in cluster %x\n", __FUNCTION__ , cxy );
519#endif
520
521    ////////////////////////////////////////
522    // Initialize array of core descriptors
523    core_id = 0;
524    for (core = &core_base[my_cluster->core_offset];
525         core < &core_base[my_cluster->core_offset + my_cluster->cores];
526         core++ )
527    {
528        boot_info->core[core_id].gid = (gid_t)core->gid;
529        boot_info->core[core_id].lid = (lid_t)core->lid; 
530        boot_info->core[core_id].cxy = (cxy_t)core->cxy;
531
532#if DEBUG_BOOT_INFO
533boot_printf("  - core_gid = %x : cxy = %x / lid = %d\n", 
534            core->gid , core->cxy , core->lid );
535#endif
536        core_id++;
537    }
538
539    // Initialize number of cores in my_cluster
540    boot_info->cores_nr = core_id;
541
542    //////////////////////////////////////////////////////////////////////
543    // initialise boot_info array of internal devices (RAM, ICU, MMC, DMA)
544
545#if DEBUG_BOOT_INFO
546boot_printf("\n[BOOT INFO] %s : internal peripherals in cluster %x\n", __FUNCTION__ , cxy );
547#endif
548
549    device_id = 0;
550    for (device = &device_base[my_cluster->device_offset];
551         device < &device_base[my_cluster->device_offset + my_cluster->devices];
552         device++ )
553    {
554        // keep only internal devices
555        if( (device->type == DEV_TYPE_RAM_SCL) ||
556            (device->type == DEV_TYPE_ICU_XCU) ||
557            (device->type == DEV_TYPE_MMC_TSR) ||
[534]558            (device->type == DEV_TYPE_DMA_SCL) ||
559            (device->type == DEV_TYPE_TXT_MTY) )
[439]560        {
561            if (device->type == DEV_TYPE_RAM_SCL)   // RAM
562            {
563                // set number of physical memory pages
564                boot_info->pages_nr   = device->size >> CONFIG_PPM_PAGE_SHIFT;
565
566#if DEBUG_BOOT_INFO
567boot_printf("  - RAM : %x pages\n", boot_info->pages_nr );
568#endif
569            }
[534]570            else                                    // ICU / MMC / DMA / MTY
[439]571            {
572                if( device_id >= CONFIG_MAX_INT_DEV ) 
573                {
574                    boot_printf("\n[ERROR] in %s : too much internal devices in cluster %x\n",
575                                __FUNCTION__ , cxy );
576                    boot_exit();
577                }
578       
579                boot_dev = &boot_info->int_dev[device_id];
580
581                boot_dev->type     = device->type;
582                boot_dev->base     = device->base;
583                boot_dev->channels = device->channels;
584                boot_dev->param0   = device->arg0;   
585                boot_dev->param1   = device->arg1;   
586                boot_dev->param2   = device->arg2;   
587                boot_dev->param3   = device->arg3;   
588                boot_dev->irqs     = device->irqs; 
589
590                device_id++;
591
592#if DEBUG_BOOT_INFO
593boot_printf("  - %s : base = %l / size = %l / channels = %d / irqs = %d\n",
594            device_type_str( device->type ) , device->base , device->size ,
595            device->channels , device->irqs );   
596#endif
597
598                // handle IRQs for ICU
599                if (device->type == DEV_TYPE_ICU_XCU) 
600                {
601                    for (irq_id = 0; irq_id < CONFIG_MAX_INTERNAL_IRQS ; irq_id++)
602                    {
603                        boot_dev->irq[irq_id].valid  = 0;
604                    }
605
606                    for (irq = &irq_base[device->irq_offset];
607                         irq < &irq_base[device->irq_offset + device->irqs] ; irq++)
608                    {
609                        boot_dev->irq[irq->port].valid    = 1;
610                        boot_dev->irq[irq->port].dev_type = irq->dev_type;
611                        boot_dev->irq[irq->port].channel  = irq->channel;
612                        boot_dev->irq[irq->port].is_rx    = irq->is_rx;
613
614#if DEBUG_BOOT_INFO
615boot_printf("    . irq_port = %d / source = %s / channel = %d / is_rx = %d\n",
616            irq->port , device_type_str( irq->dev_type ) , irq->channel , irq->is_rx );
617#endif
618
619                    }
620                }
621            }
622        }
623    }  // end loop on local peripherals
624
625    // initialize number of internal peripherals
626    boot_info->int_dev_nr = device_id;
627
628   // Get the top address of the kernel segments
629    end = boot_info->kdata_base + boot_info->kdata_size;
630
631    // compute number of physical pages occupied by the kernel code
632    boot_info->pages_offset = ( (end & CONFIG_PPM_PAGE_MASK) == 0 ) ?
633                 (end >> CONFIG_PPM_PAGE_SHIFT) : (end >> CONFIG_PPM_PAGE_SHIFT) + 1;
634
635    // no reserved sones for TSAR architecture
636    boot_info->rsvd_nr = 0;
637
638    // set boot_info signature
639    boot_info->signature = BOOT_INFO_SIGNATURE;
640
641} // boot_info_init()
642
643/***********************************************************************************
644 * This function check the local boot_info_t structure for a given core.
645 * @ boot_info  : pointer to local 'boot_info_t' structure to be checked.
646 * @ lid        : core local identifier, index the core descriptor table.
647 **********************************************************************************/
648static void boot_check_core( boot_info_t * boot_info, 
649                             lid_t         lid)
650{
651    gid_t         gid;        // global hardware identifier of this core
652    boot_core_t * this;       // BOOT_INFO core descriptor of this core. 
653
654    // Get core hardware identifier
655    gid = (gid_t)boot_get_procid();
656
657    // get pointer on core descriptor
658    this = &boot_info->core[lid];
659
660    if ( (this->gid != gid) ||  (this->cxy != boot_info->cxy) )
661    {
662        boot_printf("\n[BOOT ERROR] in boot_check_core() :\n"
663                    " - boot_info cxy = %x\n"
664                    " - boot_info lid = %d\n"
665                    " - boot_info gid = %x\n"
666                    " - actual    gid = %x\n",
667                    this->cxy , this->lid , this->gid , gid );
668        boot_exit();
669    }
670
671} // boot_check_core()
672
673/*********************************************************************************
674 * This function is called by CP0 in cluster(0,0) to activate all other CP0s.
675 * It returns the number of CP0s actually activated.
676 ********************************************************************************/
[527]677static uint32_t boot_wake_all_cp0s( void )
[439]678{
679    archinfo_header_t*  header;         // Pointer on ARCHINFO header
680    archinfo_cluster_t* cluster_base;   // Pointer on ARCHINFO clusters base
681    archinfo_cluster_t* cluster;        // Iterator for loop on clusters
682    archinfo_device_t*  device_base;    // Pointer on ARCHINFO devices base
683    archinfo_device_t*  device;         // Iterator for loop on devices
684    uint32_t            cp0_nb = 0;     // CP0s counter
685
686    header       = (archinfo_header_t*)ARCHINFO_BASE;
687    cluster_base = archinfo_get_cluster_base(header);
688    device_base  = archinfo_get_device_base (header); 
689
690    // loop on all clusters
691    for (cluster = cluster_base;
692         cluster < &cluster_base[header->x_size * header->y_size];
693         cluster++)
694    {
695        // Skip boot cluster.
696        if (cluster->cxy == BOOT_CORE_CXY)
697            continue;
698           
699        // Skip clusters without core (thus without CP0).
700        if (cluster->cores == 0)
701            continue;
702
703        // Skip clusters without device (thus without XICU).
704        if (cluster->devices == 0)
705            continue;
706
707        // search XICU device associated to CP0, and send a WTI to activate it
708        for (device = &device_base[cluster->device_offset];
709             device < &device_base[cluster->device_offset + cluster->devices];
710             device++)
711        {
712            if (device->type == DEV_TYPE_ICU_XCU)
713            {
714
715#if DEBUG_BOOT_WAKUP
716boot_printf("\n[BOOT] core[%x,0] activated at cycle %d\n",
717            cluster->cxy , boot_get_proctime );
718#endif
719
720                boot_remote_sw((xptr_t)device->base, (uint32_t)boot_entry);
721                cp0_nb++;
722            }
723        }
724    }
725    return cp0_nb;
726
727} // boot_wake_cp0()
728
729/*********************************************************************************
730 * This function is called by all CP0 to activate the other CPi cores.
731 * @ boot_info  : pointer to local 'boot_info_t' structure.
732 *********************************************************************************/
733static void boot_wake_local_cores(boot_info_t * boot_info)
734{
735    unsigned int     core_id;       
736
737    // get pointer on XCU device descriptor in boot_info
738    boot_device_t *  xcu = &boot_info->int_dev[0];
739 
740    // loop on cores
741    for (core_id = 1; core_id < boot_info->cores_nr; core_id++)
742    {
743
744#if DEBUG_BOOT_WAKUP
745boot_printf("\n[BOOT] core[%x,%d] activated at cycle %d\n",
746             boot_info->cxy , core_id , boot_get_proctime() );
747#endif
748        // send an IPI
749        boot_remote_sw( (xptr_t)(xcu->base + (core_id << 2)) , (uint32_t)boot_entry ); 
750    }
751} // boot_wake_local_cores()
752
753
754/*********************************************************************************
755 * This main function of the boot-loader is called by the  boot_entry() 
756 * function, and executed by all cores.
757 * The arguments values are computed by the boot_entry code.
758 * @ lid    : core local identifier,
759 * @ cxy    : cluster identifier,
760 *********************************************************************************/
[524]761void boot_loader( lid_t lid,
762                  cxy_t cxy )
[439]763{
764    boot_info_t * boot_info;       // pointer on local boot_info_t structure
765
766    if (lid == 0) 
767    {
768        /****************************************************
769         * PHASE A : only CP0 in boot cluster executes it
770         ***************************************************/
771        if (cxy == BOOT_CORE_CXY)
772        {
773            boot_printf("\n[BOOT] core[%x,%d] enters at cycle %d\n",
774                        cxy , lid , boot_get_proctime() );
775
776            // Initialize IOC driver
777            if      (USE_IOC_BDV) boot_bdv_init();
778            else if (USE_IOC_HBA) boot_hba_init();
779            // else if (USE_IOC_SDC) boot_sdc_init();
780            // else if (USE_IOC_SPI) boot_spi_init();
781            else if (!USE_IOC_RDK)
782            {
783                boot_printf("\n[BOOT ERROR] in %s : no IOC driver\n");
784                boot_exit();
785            }
786
787            // Initialize FAT32.
788            boot_fat32_init();
789
790            // Load the 'kernel.elf' file into memory from IOC, and set   
791            // the global variables defining the kernel layout     
792            boot_kernel_load();
793
794            boot_printf("\n[BOOT] core[%x,%d] loaded kernel at cycle %d\n",
795                        cxy , lid , boot_get_proctime() );
796
797            // Load the arch_info.bin file into memory.
798            boot_archinfo_load();
799
800            // Get local boot_info_t structure base address.
801            // It is the first structure in the .kdata segment.
802            boot_info = (boot_info_t *)seg_kdata_base;
803
804            // Initialize local boot_info_t structure.
805            boot_info_init( boot_info , cxy );
806
807            // check boot_info signature
808            if (boot_info->signature != BOOT_INFO_SIGNATURE)
809            {
810                boot_printf("\n[BOOT ERROR] in %s reported by core[%x,%d]\n"
811                            "  illegal boot_info signature / should be %x\n",
812                            __FUNCTION__ , cxy , lid , BOOT_INFO_SIGNATURE );
813                boot_exit();
814            }
815
816            boot_printf("\n[BOOT] core[%x,%d] loaded arch_info at cycle %d\n",
817                        cxy , lid , boot_get_proctime() );
818
819            // Check core information.
820            boot_check_core(boot_info, lid);
821
822            // Activate other CP0s / get number of active CP0s
823            active_cp0s_nr = boot_wake_all_cp0s() + 1;
824
825            // Wait until all clusters (i.e all CP0s) ready to enter kernel.
826            boot_remote_barrier( XPTR( BOOT_CORE_CXY , &global_barrier ) ,
827                                 active_cp0s_nr );
828
829            // activate other local cores
830            boot_wake_local_cores( boot_info );
831
832// display address extensions
833// uint32_t cp2_data_ext;
834// uint32_t cp2_ins_ext;
835// asm volatile( "mfc2   %0,  $24" : "=&r" (cp2_data_ext) );
836// asm volatile( "mfc2   %0,  $25" : "=&r" (cp2_ins_ext) );
837// boot_printf("\n[BOOT] core[%x,%d] CP2_DATA_EXT = %x / CP2_INS_EXT = %x\n",
838// cxy , lid , cp2_data_ext , cp2_ins_ext );
839
840            // Wait until all local cores in cluster ready
841            boot_remote_barrier( XPTR( cxy , &local_barrier ) , 
842                                 boot_info->cores_nr );
843        }
844        /******************************************************************
845         * PHASE B : all CP0s other than CP0 in boot cluster execute it
846         *****************************************************************/
847        else
848        {
849            // at this point, all INSTRUCTION address extension registers
850            // point on cluster(0,0), but the DATA extension registers point
851            // already on the local cluster to use the local stack.
852            // To access the bootloader global variables we must first copy
853            // the boot code (data and instructions) in the local cluster.
854            boot_remote_memcpy( XPTR( cxy           , BOOT_BASE ),
855                                XPTR( BOOT_CORE_CXY , BOOT_BASE ),
856                                BOOT_MAX_SIZE );
857
858            // from now, it is safe to refer to the boot code global variables
859            boot_printf("\n[BOOT] core[%x,%d] replicated boot code at cycle %d\n",
860                        cxy , lid , boot_get_proctime() );
861
862                        // switch to the INSTRUCTION local memory space, to avoid contention.
863            asm volatile("mtc2  %0, $25" :: "r"(cxy));
864
865            // Copy the arch_info.bin file into the local memory.
866            boot_remote_memcpy(XPTR(cxy,           ARCHINFO_BASE),
867                               XPTR(BOOT_CORE_CXY, ARCHINFO_BASE),
868                               ARCHINFO_MAX_SIZE );
869
870            boot_printf("\n[BOOT] core[%x,%d] replicated arch_info at cycle %d\n",
871                        cxy , lid , boot_get_proctime() );
872
873            // Copy the kcode segment into local memory
874            boot_remote_memcpy( XPTR( cxy           , seg_kcode_base ),
875                                XPTR( BOOT_CORE_CXY , seg_kcode_base ),
876                                seg_kcode_size );
877
878            // Copy the kdata segment into local memory
879            boot_remote_memcpy( XPTR( cxy           , seg_kdata_base ),
880                                XPTR( BOOT_CORE_CXY , seg_kdata_base ),
881                                seg_kdata_size );
882
883            // Copy the kentry segment into local memory
884            boot_remote_memcpy( XPTR( cxy           , seg_kentry_base ),
885                                XPTR( BOOT_CORE_CXY , seg_kentry_base ),
886                                seg_kentry_size );
887
888            boot_printf("\n[BOOT] core[%x,%d] replicated kernel code at cycle %d\n",
889                        cxy , lid , boot_get_proctime() );
890
891            // Get local boot_info_t structure base address.
892            boot_info = (boot_info_t*)seg_kdata_base;
893
894            // Initialize local boot_info_t structure.
895            boot_info_init( boot_info , cxy );
896
897            // Check core information.
898            boot_check_core( boot_info , lid );
899
900            // get number of active clusters from BOOT_CORE cluster
901            uint32_t count = boot_remote_lw( XPTR( BOOT_CORE_CXY , &active_cp0s_nr ) );
902
903            // Wait until all clusters (i.e all CP0s) ready to enter kernel
904            boot_remote_barrier( XPTR( BOOT_CORE_CXY , &global_barrier ) , count );
905
906            // activate other local cores
907            boot_wake_local_cores( boot_info );
908
909// display address extensions
910// uint32_t cp2_data_ext;
911// uint32_t cp2_ins_ext;
912// asm volatile( "mfc2   %0,  $24" : "=&r" (cp2_data_ext) );
913// asm volatile( "mfc2   %0,  $25" : "=&r" (cp2_ins_ext) );
914// boot_printf("\n[BOOT] core[%x,%d] CP2_DATA_EXT = %x / CP2_INS_EXT = %x\n",
915// cxy , lid , cp2_data_ext , cp2_ins_ext );
916
917            // Wait until all local cores in cluster ready
918            boot_remote_barrier( XPTR( cxy , &local_barrier ) , 
919                                 boot_info->cores_nr );
920        }
921    }
922    else
923    {
924        /***************************************************************
925         * PHASE C: all non CP0 cores in all clusters execute it
926         **************************************************************/
927
928        // Switch to the INSTRUCTIONS local memory space
929        // to avoid contention at the boot cluster.
930        asm volatile("mtc2  %0, $25" :: "r"(cxy));
931
932        // Get local boot_info_t structure base address.
933        boot_info = (boot_info_t *)seg_kdata_base;
934
935        // Check core information
936        boot_check_core(boot_info, lid);
937
938// display address extensions
939// uint32_t cp2_data_ext;
940// uint32_t cp2_ins_ext;
941// asm volatile( "mfc2   %0,  $24" : "=&r" (cp2_data_ext) );
942// asm volatile( "mfc2   %0,  $25" : "=&r" (cp2_ins_ext) );
943// boot_printf("\n[BOOT] core[%x,%d] CP2_DATA_EXT = %x / CP2_INS_EXT = %x\n",
944// cxy , lid , cp2_data_ext , cp2_ins_ext );
945
946        // Wait until all local cores in cluster ready
947        boot_remote_barrier( XPTR( cxy , &local_barrier ) , boot_info->cores_nr );
948    }
949
950    // Each core initialise the following registers before jumping to kernel:
951    // - sp_29    : stack pointer on idle thread,
952    // - c0_sr    : reset BEV bit
953    // - a0_04    : pointer on boot_info structure
954    // - c0_ebase : kentry_base(and jump to kernel_entry.
955
956    // The array of idle-thread descriptors is allocated in the kdata segment,
957    // just after the boot_info structure
958    uint32_t sp;
959    uint32_t base;
960    uint32_t offset = sizeof( boot_info_t );
961    uint32_t pmask  = CONFIG_PPM_PAGE_MASK;
962    uint32_t psize  = CONFIG_PPM_PAGE_SIZE;
963
964    // compute base address of idle thread descriptors array
965    if( offset & pmask ) base = seg_kdata_base + (offset & ~pmask) + psize;
966    else                 base = seg_kdata_base + offset;
967
968    // compute stack pointer
969    sp = base + ((lid + 1) * CONFIG_THREAD_DESC_SIZE) - 16;
970
971    asm volatile( "mfc0  $27,  $12           \n"
972                  "lui   $26,  0xFFBF        \n"
973                  "ori   $26,  $26,  0xFFFF  \n"
974                  "and   $27,  $27,  $26     \n"
975                  "mtc0  $27,  $12           \n"
976                  "move  $4,   %0            \n"
977                  "move  $29,  %1            \n"
978                  "mtc0  %2,   $15,  1       \n"
979                  "jr    %3                  \n"
980                  :
981                  : "r"(boot_info) ,
982                    "r"(sp) ,
983                    "r"(boot_info->kentry_base) ,
984                    "r"(kernel_entry) 
985                  : "$26" , "$27" , "$29" , "$4" );
986
987
988} // boot_loader()
Note: See TracBrowser for help on using the repository browser.