source: trunk/hal/tsar_mips32/core/hal_exception.c @ 416

Last change on this file since 416 was 416, checked in by alain, 6 years ago

Improve sys_exec.

File size: 16.6 KB
RevLine 
[16]1/*
2 * hal_exception.c - implementation of exception handler for TSAR-MIPS32.
3 *
4 * Author   Alain Greiner (2016, 2017)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#include <hal_types.h>
25#include <hal_irqmask.h>
[406]26#include <hal_special.h>
[16]27#include <hal_exception.h>
28#include <thread.h>
29#include <printk.h>
[380]30#include <chdev.h>
[16]31#include <vmm.h>
32#include <errno.h>
33#include <scheduler.h>
34#include <core.h>
35#include <signal.h>
36#include <syscalls.h>
37#include <remote_spinlock.h>
[406]38#include <hal_kentry.h>
[16]39
[380]40
[16]41//////////////////////////////////////////////////////////////////////////////////////////
42//  Extern global variables
43//////////////////////////////////////////////////////////////////////////////////////////
44
[380]45extern   chdev_directory_t    chdev_dir;  // allocated in the kernel_init.c file.
[16]46
47//////////////////////////////////////////////////////////////////////////////////////////
[381]48// This enum defines the global exception types after analysis by the exception handler.
49//////////////////////////////////////////////////////////////////////////////////////////
50
51typedef enum
52{
53    EXCP_NON_FATAL,
54    EXCP_USER_ERROR,
55    EXCP_KERNEL_PANIC,
56}
57exception_handling_type_t;
58
59//////////////////////////////////////////////////////////////////////////////////////////
[407]60// This enum defines the mask values for an MMU exception code reported by the mips32.
[381]61//////////////////////////////////////////////////////////////////////////////////////////
62
63typedef enum
64{
[407]65    MMU_WRITE_PT1_UNMAPPED        = 0x0001,
66    MMU_WRITE_PT2_UNMAPPED        = 0x0002,
67    MMU_WRITE_PRIVILEGE_VIOLATION = 0x0004,
68    MMU_WRITE_ACCESS_VIOLATION    = 0x0008,
69    MMU_WRITE_UNDEFINED_XTN       = 0x0020,
70    MMU_WRITE_PT1_ILLEGAL_ACCESS  = 0x0040,
71    MMU_WRITE_PT2_ILLEGAL_ACCESS  = 0x0080,
72    MMU_WRITE_DATA_ILLEGAL_ACCESS = 0x0100,
73
74    MMU_READ_PT1_UNMAPPED         = 0x1001,
75    MMU_READ_PT2_UNMAPPED         = 0x1002,
76    MMU_READ_PRIVILEGE_VIOLATION  = 0x1004,
77    MMU_READ_EXEC_VIOLATION       = 0x1010,
78    MMU_READ_UNDEFINED_XTN        = 0x1020,
79    MMU_READ_PT1_ILLEGAL_ACCESS   = 0x1040,
80    MMU_READ_PT2_ILLEGAL_ACCESS   = 0x1080,
81    MMU_READ_DATA_ILLEGAL_ACCESS  = 0x1100,
[381]82}
83mmu_exception_subtype_t;
84
85//////////////////////////////////////////////////////////////////////////////////////////
[16]86// This enum defines the relevant values for XCODE field in mips32 CP0_CR register.
87//////////////////////////////////////////////////////////////////////////////////////////
88
89typedef enum
90{
[296]91    XCODE_ADEL = 0x4,        // Illegal address for data load
92    XCODE_ADES = 0x5,        // Illegal address for data store
93    XCODE_IBE  = 0x6,        // Instruction MMU exception       (can be NON-FATAL)
94    XCODE_DBE  = 0x7,        // Data MMU exception              (can be NON-FATAL)
95    XCODE_RI   = 0xA,        // Reserved instruction exception
96    XCODE_CPU  = 0xB,        // Coprocessor unusable exception  (can be NON-FATAl)
97    XCODE_OVR  = 0xC,        // Arithmetic Overflow exception
[16]98}
99xcode_values_t;
100
[409]101/////////////////////////////////////////////
102char * hal_mmu_exception_str( uint32_t code )
[408]103{
104    if     ( code == MMU_WRITE_PT1_UNMAPPED        ) return "WRITE_PT1_UNMAPPED";
105    else if( code == MMU_WRITE_PT2_UNMAPPED        ) return "WRITE_PT2_UNMAPPED";
106    else if( code == MMU_WRITE_PRIVILEGE_VIOLATION ) return "WRITE_PRIVILEGE_VIOLATION";
107    else if( code == MMU_WRITE_ACCESS_VIOLATION    ) return "WRITE_ACCESS_VIOLATION";
108    else if( code == MMU_WRITE_UNDEFINED_XTN       ) return "WRITE_UNDEFINED_XTN";
109    else if( code == MMU_WRITE_PT1_ILLEGAL_ACCESS  ) return "WRITE_PT1_ILLEGAL_ACCESS";
110    else if( code == MMU_WRITE_PT2_ILLEGAL_ACCESS  ) return "WRITE_PT2_ILLEGAL_ACCESS";
111    else if( code == MMU_WRITE_DATA_ILLEGAL_ACCESS ) return "WRITE_DATA_ILLEGAL_ACCESS";
112    else if( code == MMU_READ_PT1_UNMAPPED         ) return "READ_PT1_UNMAPPED";
113    else if( code == MMU_READ_PT2_UNMAPPED         ) return "READ_PT2_UNMAPPED";
114    else if( code == MMU_READ_PRIVILEGE_VIOLATION  ) return "READ_PRIVILEGE_VIOLATION";
115    else if( code == MMU_READ_EXEC_VIOLATION       ) return "READ_EXEC_VIOLATION";
116    else if( code == MMU_READ_UNDEFINED_XTN        ) return "READ_UNDEFINED_XTN";
117    else if( code == MMU_READ_PT1_ILLEGAL_ACCESS   ) return "READ_PT1_ILLEGAL_ACCESS";
118    else if( code == MMU_READ_PT2_ILLEGAL_ACCESS   ) return "READ_PT2_ILLEGAL_ACCESS";
119    else if( code == MMU_READ_DATA_ILLEGAL_ACCESS  ) return "READ_DATA_ILLEGAL_ACCESS";
120    else                                             return "undefined";
121}
122
[380]123//////////////////////////////////////////////////////////////////////////////////////////
[406]124// This function is called when a FPU Coprocessor Unavailable exception has been
[380]125// detected for the calling thread.
126// It enables the FPU, It saves the current FPU context in the current owner thread
127// descriptor if required, and restore the FPU context from the calling thread descriptor.
128//////////////////////////////////////////////////////////////////////////////////////////
129// @ this     : pointer on faulty thread descriptor.
130// @ return always EXCP_NON_FATAL
131//////////////////////////////////////////////////////////////////////////////////////////
[406]132error_t hal_fpu_exception( thread_t * this )
[380]133{
134        core_t   * core = this->core; 
135
136    // enable FPU 
137        hal_fpu_enable();
138
139    // save FPU context in current owner thread if required
140        if( core->fpu_owner != NULL )
141    {
142        if( core->fpu_owner != this )
143            {
[408]144                    hal_fpu_context_save( XPTR( local_cxy , core->fpu_owner ) );
[380]145        }
146        }
147
148    // attach the FPU to the requesting thread
149        hal_fpu_context_restore( this->fpu_context );
150        core->fpu_owner = this;
151
152        return EXCP_NON_FATAL;
153
154}  // end hal_fpu_exception()
155
156//////////////////////////////////////////////////////////////////////////////////////////
[406]157// This function is called when an MMU exception has been detected.
[380]158// It get the relevant exception arguments from the MMU.
159// It signal a fatal error in case of illegal access. In case of page unmapped
160// it checks that the faulty address belongs to a registered vseg. It update the local
161// vseg list from the reference cluster if required, and signal a fatal user error
162// in case of illegal virtual address. Finally, it updates the local page table from the
163// reference cluster.
164//////////////////////////////////////////////////////////////////////////////////////////
165// @ this     : pointer on faulty thread descriptor.
[406]166// @ is_ins   : IBE if true / DBE if false.
[380]167// @ return EXCP_NON_FATAL / EXCP_USER_ERROR / EXCP_KERNEL_PANIC
168//////////////////////////////////////////////////////////////////////////////////////////
[406]169error_t hal_mmu_exception( thread_t * this,
170                           bool_t     is_ins ) 
[380]171{
[406]172        process_t      * process;
173    error_t          error;
[380]174
[406]175    uint32_t         mmu_ins_excp_code;
176    uint32_t         mmu_ins_bad_vaddr;
177    uint32_t         mmu_dat_excp_code;
178    uint32_t         mmu_dat_bad_vaddr;
[380]179
[406]180    uint32_t         bad_vaddr;
[380]181    uint32_t         excp_code;
182       
[406]183    process = this->process;
[380]184
185    // get relevant values from MMU
186        hal_get_mmu_excp( &mmu_ins_excp_code,
187                          &mmu_ins_bad_vaddr,
188                          &mmu_dat_excp_code, 
189                          &mmu_dat_bad_vaddr );
190
[406]191    // get exception code and faulty vaddr, depending on IBE/DBE
192    if( is_ins )
[380]193    {
194        excp_code = mmu_ins_excp_code;
195        bad_vaddr = mmu_ins_bad_vaddr;
196    }
[406]197    else 
[380]198    {
199        excp_code = mmu_dat_excp_code;
200        bad_vaddr = mmu_dat_bad_vaddr;
201    }
202
[409]203excp_dmsg("\n[DBG] %s : core[%x,%d] / is_ins %d / %s / vaddr %x\n",
[408]204__FUNCTION__ , local_cxy , this->core->lid , is_ins,
205hal_mmu_exception_str(excp_code) , bad_vaddr );
206
[407]207   // analyse exception code
208    switch( excp_code )
[380]209    {
[407]210        case MMU_WRITE_PT1_UNMAPPED:      // non fatal
211        case MMU_WRITE_PT2_UNMAPPED:
212        case MMU_READ_PT1_UNMAPPED:
213        case MMU_READ_PT2_UNMAPPED:
214        {
215            // try to map the unmapped PTE
216            error = vmm_handle_page_fault( process, 
217                                           bad_vaddr >> CONFIG_PPM_PAGE_SHIFT );  // vpn
218            if( error )   
219            {
220                printk("\n[ERROR] in %s for thread %x : cannot map vaddr = %x\n",
221                __FUNCTION__ , this->trdid , bad_vaddr );
[406]222
[407]223                        return EXCP_USER_ERROR;
224            } 
225            else            // page fault successfull
226            {
[391]227
[407]228excp_dmsg("\n[DBG] %s : core[%x,%d] / page-fault handled for vaddr = %x\n",
229__FUNCTION__ , local_cxy , this->core->lid , bad_vaddr );
230 
231                return EXCP_NON_FATAL;
232            }
233        }
234        case MMU_WRITE_PRIVILEGE_VIOLATION:  // illegal access user error
235        case MMU_READ_PRIVILEGE_VIOLATION:
[380]236        {
[407]237            printk("\n[ERROR] in %s for thread %x : illegal user access to vaddr = %x\n",
238            __FUNCTION__ , this->trdid , bad_vaddr );
[380]239
[407]240            return EXCP_USER_ERROR;
241        }
[408]242        case MMU_WRITE_ACCESS_VIOLATION:     // user error, or Copy-on-Write
[380]243        {
[407]244            // access page table to get GPT_COW flag
245            bool_t cow = hal_gpt_pte_is_cow( &(process->vmm.gpt),
[408]246                                             bad_vaddr >> CONFIG_PPM_PAGE_SHIFT ); 
[380]247
[407]248            if( cow )                        // Copy-on-Write
249            {
250                // try to allocate and copy the page
[408]251                error = vmm_handle_cow( process,
252                                        bad_vaddr >> CONFIG_PPM_PAGE_SHIFT ); 
[407]253                if( error )
254                {
255                    printk("\n[ERROR] in %s for thread %x : cannot cow vaddr = %x\n",
256                    __FUNCTION__ , this->trdid , bad_vaddr );
[380]257
[407]258                            return EXCP_USER_ERROR;
259                }
260                else         // Copy on write successfull
261                {
[380]262
[409]263excp_dmsg("\n[DBG] %s : core[%x,%d] / copy-on-write handled for vaddr = %x\n",
[407]264__FUNCTION__ , local_cxy , this->core->lid , bad_vaddr );
[380]265
[407]266                    return EXCP_NON_FATAL;
267                } 
268            }
269            else                             // non writable user error
270            {
[409]271                printk("\n[ERROR] in %s for thread %x : non-writable vaddr = %x\n",
[407]272                __FUNCTION__ , this->trdid , bad_vaddr );
273
274                return EXCP_USER_ERROR;
275            }
276        }
277        case MMU_READ_EXEC_VIOLATION:        // user error
278        {
279            printk("\n[ERROR] in %s for thread %x : read to non-executable vaddr = %x\n",
280            __FUNCTION__ , this->trdid , bad_vaddr );
281
282            return EXCP_USER_ERROR;
283        }
284        default:                             // this is a kernel error => panic   
285        {
286            printk("\n[PANIC] in %s for thread %x : kernel exception = %x / vaddr = %x\n",
287            __FUNCTION__ , this->trdid , excp_code , bad_vaddr );
288
289            return EXCP_KERNEL_PANIC;
290        }
291    } 
[380]292} // end hal_mmu_exception()
293
294//////////////////////////////////////////////////////////////////////////////////////////
295// This static function prints on the kernel terminal the saved context (core registers)
296// and the thread state of a faulty thread.
297//////////////////////////////////////////////////////////////////////////////////////////
298// @ this     : pointer on faulty thread descriptor.
[408]299// @ uzone : pointer on register array.
[407]300// @ error    : EXCP_USER_ERROR or EXCP_KERNEL_PANIC
[380]301//////////////////////////////////////////////////////////////////////////////////////////
302static void hal_exception_dump( thread_t * this,
[408]303                                reg_t    * uzone,
[407]304                                error_t    error )
[380]305{
[408]306    uint32_t    save_sr;
307    core_t    * core    = this->core;
308    process_t * process = this->process;
[380]309
310    // get pointers on TXT0 chdev
[407]311    xptr_t    txt0_xp  = chdev_dir.txt_tx[0];
[380]312    cxy_t     txt0_cxy = GET_CXY( txt0_xp );
313    chdev_t * txt0_ptr = GET_PTR( txt0_xp );
314
315    // get extended pointer on remote TXT0 chdev lock
316    xptr_t  lock_xp = XPTR( txt0_cxy , &txt0_ptr->wait_lock );
317
318    // get TXT0 lock in busy waiting mode
319    remote_spinlock_lock_busy( lock_xp , &save_sr );
320
[407]321    if( error == EXCP_USER_ERROR )
322    {
[408]323        nolock_printk("\n=== USER ERROR / trdid %x / pid %x / core[%x,%d] / cycle %d ===\n",
324        this->trdid, process->pid, local_cxy, core->lid , (uint32_t)hal_get_cycles() );
[407]325    }
[380]326    else
[407]327    {
[408]328        nolock_printk("\n=== KERNEL PANIC / trdid %x / pid %x / core[%x,%d] / cycle %d ===\n",
329        this->trdid, process->pid, local_cxy, core->lid , (uint32_t)hal_get_cycles() );
[407]330    }
[380]331
[408]332        nolock_printk("local locks = %d / remote locks = %d / blocked_vector = %X\n\n",
333    this->local_locks, this->remote_locks, this->blocked );
[380]334
[408]335    nolock_printk("c0_cr   %X  c0_epc  %X  c0_sr  %X  c0_th  %X\n",
336    uzone[UZ_CR], uzone[UZ_EPC], uzone[UZ_SR], uzone[UZ_TH] );
[380]337
[408]338    nolock_printk("c2_mode %X  c2_ptpr %X\n",
339    uzone[UZ_MODE], uzone[UZ_PTPR] );
[380]340
[408]341    nolock_printk("at_01   %X  v0_2    %X  v1_3   %X  a0_4   %X  a1_5   %X\n",
342        uzone[UZ_AT], uzone[UZ_V0], uzone[UZ_V1], uzone[UZ_A0], uzone[UZ_A1] );
343
344    nolock_printk("a2_6    %X  a3_7    %X  t0_8   %X  t1_9   %X  t2_10  %X\n",
345        uzone[UZ_A2], uzone[UZ_A3], uzone[UZ_T0], uzone[UZ_T1], uzone[UZ_T2] );
[380]346 
[408]347    nolock_printk("t3_11   %X  t4_12   %X  t5_13  %X  t6_14  %X  t7_15  %X\n",
348        uzone[UZ_T3], uzone[UZ_T4], uzone[UZ_T5], uzone[UZ_T6], uzone[UZ_T7] );
[380]349
[408]350    nolock_printk("s0_16   %X  s1_17   %X  s2_18  %X  s3_19  %X  s4_20  %X\n",
351        uzone[UZ_S0], uzone[UZ_S1], uzone[UZ_S2], uzone[UZ_S3], uzone[UZ_S4] );
[380]352 
[408]353    nolock_printk("s5_21   %X  s6_22   %X  s7_23  %X  s8_24  %X  ra_25  %X\n",
354        uzone[UZ_S5], uzone[UZ_S6], uzone[UZ_S7], uzone[UZ_T8], uzone[UZ_T9] );
[380]355
[408]356    nolock_printk("gp_28   %X  sp_29   %X  S8_30  %X  ra_31  %X\n",
357        uzone[UZ_GP], uzone[UZ_SP], uzone[UZ_S8], uzone[UZ_RA] );
[407]358
[380]359    // release the lock
360    remote_spinlock_unlock_busy( lock_xp , save_sr );
361
362}  // end hal_exception_dump()
363
[408]364///////////////////////
365void hal_do_exception()
[16]366{
[408]367    uint32_t   * uzone;
368    thread_t   * this;
369        error_t      error;
370        uint32_t     excCode;                  // 4 bits XCODE from CP0_CR
[16]371
[408]372    // get pointer on faulty thread uzone
373    this  = CURRENT_THREAD;
374    uzone = (uint32_t *)CURRENT_THREAD->uzone;
375
[16]376    // get 4 bits XCODE from CP0_CR register
[408]377        excCode        = (uzone[UZ_CR] >> 2) & 0xF;
[16]378
[407]379excp_dmsg("\n[DBG] %s : core[%x,%d] / thread %x in process %x / xcode %x / cycle %d\n",
380__FUNCTION__, local_cxy, this->core->lid, this->trdid, 
[408]381this->process->pid, excCode, (uint32_t)hal_get_cycles() );
[406]382
[16]383        switch(excCode)
384        {
385        case XCODE_DBE:     // can be non fatal
[406]386        {
387                    error = hal_mmu_exception( this , false );  // data MMU exception
388            break;
389        }
[380]390            case XCODE_IBE:     // can be non fatal
[16]391        {
[406]392                    error = hal_mmu_exception( this , true );   // ins MMU exception
393                    break;
[16]394        }
395            case XCODE_CPU:    // can be non fatal
396        {
[408]397            if( ((uzone[UZ_CR] >> 28) & 0x3) == 1 )     // unavailable FPU
[16]398            {
[380]399                error = hal_fpu_exception( this );
[16]400            }
401            else
402            {
403                        error = EXCP_USER_ERROR;
404            }
[406]405                    break;
[16]406        }
[380]407        case XCODE_OVR:    // user fatal error
408        case XCODE_RI:     // user fatal error
409        case XCODE_ADEL:   // user fatal error
410        case XCODE_ADES:   // user fatal error
[16]411        {
412                    error = EXCP_USER_ERROR;
[406]413                break;
[16]414        }
415        default:
416        {
[317]417                    error = EXCP_KERNEL_PANIC;
[16]418        }
419        }
420   
421    // analyse error code
[317]422        if( error == EXCP_USER_ERROR )          //  user error => kill user process
[16]423        {
[408]424        hal_exception_dump( this , uzone , error );
[407]425
426        // FIXME : replace this loop by sys_kill()
427        while( 1 ) asm volatile ("nop");
428        // sys_kill( this->process->pid , SIGKILL );
[16]429        }
430    else if( error == EXCP_KERNEL_PANIC )   // kernel error => kernel panic
431    {
[408]432        hal_exception_dump( this , uzone , error );
[416]433        panic( "for thread %x in process %x on core [%x,%d]",
[408]434        this->trdid , this->process->pid , local_cxy , this->core->lid );
[16]435    }
[406]436
[407]437excp_dmsg("\n[DBG] %s : core[%x,%d] exit / thread %x in process %x / cycle %d\n",
[408]438__FUNCTION__, local_cxy, this->core->lid, this->trdid, this->process->pid,
439(uint32_t)hal_get_cycles() );
[406]440
[16]441}  // end hal_do_exception()
442
443
Note: See TracBrowser for help on using the repository browser.