source: trunk/hal/tsar_mips32/core/hal_exception.c @ 437

Last change on this file since 437 was 437, checked in by alain, 6 years ago

Fix various bugs

File size: 17.2 KB
Line 
1/*
2 * hal_exception.c - implementation of exception handler for TSAR-MIPS32.
3 *
4 * Author   Alain Greiner (2016, 2017)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#include <hal_types.h>
25#include <hal_irqmask.h>
26#include <hal_special.h>
27#include <hal_exception.h>
28#include <thread.h>
29#include <printk.h>
30#include <chdev.h>
31#include <vmm.h>
32#include <errno.h>
33#include <scheduler.h>
34#include <core.h>
35#include <syscalls.h>
36#include <remote_spinlock.h>
37#include <hal_kentry.h>
38
39
40//////////////////////////////////////////////////////////////////////////////////////////
41//  Extern global variables
42//////////////////////////////////////////////////////////////////////////////////////////
43
44extern   chdev_directory_t    chdev_dir;  // allocated in the kernel_init.c file.
45
46//////////////////////////////////////////////////////////////////////////////////////////
47// This enum defines the global exception types after analysis by the exception handler.
48//////////////////////////////////////////////////////////////////////////////////////////
49
50typedef enum
51{
52    EXCP_NON_FATAL,
53    EXCP_USER_ERROR,
54    EXCP_KERNEL_PANIC,
55}
56exception_handling_type_t;
57
58//////////////////////////////////////////////////////////////////////////////////////////
59// This enum defines the mask values for an MMU exception code reported by the mips32.
60//////////////////////////////////////////////////////////////////////////////////////////
61
62typedef enum
63{
64    MMU_WRITE_PT1_UNMAPPED        = 0x0001,
65    MMU_WRITE_PT2_UNMAPPED        = 0x0002,
66    MMU_WRITE_PRIVILEGE_VIOLATION = 0x0004,
67    MMU_WRITE_ACCESS_VIOLATION    = 0x0008,
68    MMU_WRITE_UNDEFINED_XTN       = 0x0020,
69    MMU_WRITE_PT1_ILLEGAL_ACCESS  = 0x0040,
70    MMU_WRITE_PT2_ILLEGAL_ACCESS  = 0x0080,
71    MMU_WRITE_DATA_ILLEGAL_ACCESS = 0x0100,
72
73    MMU_READ_PT1_UNMAPPED         = 0x1001,
74    MMU_READ_PT2_UNMAPPED         = 0x1002,
75    MMU_READ_PRIVILEGE_VIOLATION  = 0x1004,
76    MMU_READ_EXEC_VIOLATION       = 0x1010,
77    MMU_READ_UNDEFINED_XTN        = 0x1020,
78    MMU_READ_PT1_ILLEGAL_ACCESS   = 0x1040,
79    MMU_READ_PT2_ILLEGAL_ACCESS   = 0x1080,
80    MMU_READ_DATA_ILLEGAL_ACCESS  = 0x1100,
81}
82mmu_exception_subtype_t;
83
84//////////////////////////////////////////////////////////////////////////////////////////
85// This enum defines the relevant values for XCODE field in mips32 CP0_CR register.
86//////////////////////////////////////////////////////////////////////////////////////////
87
88typedef enum
89{
90    XCODE_ADEL = 0x4,        // Illegal address for data load
91    XCODE_ADES = 0x5,        // Illegal address for data store
92    XCODE_IBE  = 0x6,        // Instruction MMU exception       (can be NON-FATAL)
93    XCODE_DBE  = 0x7,        // Data MMU exception              (can be NON-FATAL)
94    XCODE_RI   = 0xA,        // Reserved instruction exception
95    XCODE_CPU  = 0xB,        // Coprocessor unusable exception  (can be NON-FATAl)
96    XCODE_OVR  = 0xC,        // Arithmetic Overflow exception
97}
98xcode_values_t;
99
100/////////////////////////////////////////////
101char * hal_mmu_exception_str( uint32_t code )
102{
103    if     ( code == MMU_WRITE_PT1_UNMAPPED        ) return "WRITE_PT1_UNMAPPED";
104    else if( code == MMU_WRITE_PT2_UNMAPPED        ) return "WRITE_PT2_UNMAPPED";
105    else if( code == MMU_WRITE_PRIVILEGE_VIOLATION ) return "WRITE_PRIVILEGE_VIOLATION";
106    else if( code == MMU_WRITE_ACCESS_VIOLATION    ) return "WRITE_ACCESS_VIOLATION";
107    else if( code == MMU_WRITE_UNDEFINED_XTN       ) return "WRITE_UNDEFINED_XTN";
108    else if( code == MMU_WRITE_PT1_ILLEGAL_ACCESS  ) return "WRITE_PT1_ILLEGAL_ACCESS";
109    else if( code == MMU_WRITE_PT2_ILLEGAL_ACCESS  ) return "WRITE_PT2_ILLEGAL_ACCESS";
110    else if( code == MMU_WRITE_DATA_ILLEGAL_ACCESS ) return "WRITE_DATA_ILLEGAL_ACCESS";
111    else if( code == MMU_READ_PT1_UNMAPPED         ) return "READ_PT1_UNMAPPED";
112    else if( code == MMU_READ_PT2_UNMAPPED         ) return "READ_PT2_UNMAPPED";
113    else if( code == MMU_READ_PRIVILEGE_VIOLATION  ) return "READ_PRIVILEGE_VIOLATION";
114    else if( code == MMU_READ_EXEC_VIOLATION       ) return "READ_EXEC_VIOLATION";
115    else if( code == MMU_READ_UNDEFINED_XTN        ) return "READ_UNDEFINED_XTN";
116    else if( code == MMU_READ_PT1_ILLEGAL_ACCESS   ) return "READ_PT1_ILLEGAL_ACCESS";
117    else if( code == MMU_READ_PT2_ILLEGAL_ACCESS   ) return "READ_PT2_ILLEGAL_ACCESS";
118    else if( code == MMU_READ_DATA_ILLEGAL_ACCESS  ) return "READ_DATA_ILLEGAL_ACCESS";
119    else                                             return "undefined";
120}
121
122//////////////////////////////////////////////////////////////////////////////////////////
123// This function is called when a FPU Coprocessor Unavailable exception has been
124// detected for the calling thread.
125// It enables the FPU, It saves the current FPU context in the current owner thread
126// descriptor if required, and restore the FPU context from the calling thread descriptor.
127//////////////////////////////////////////////////////////////////////////////////////////
128// @ this     : pointer on faulty thread descriptor.
129// @ return always EXCP_NON_FATAL
130//////////////////////////////////////////////////////////////////////////////////////////
131error_t hal_fpu_exception( thread_t * this )
132{
133        core_t   * core = this->core; 
134
135    // enable FPU 
136        hal_fpu_enable();
137
138    // save FPU context in current owner thread if required
139        if( core->fpu_owner != NULL )
140    {
141        if( core->fpu_owner != this )
142            {
143                    hal_fpu_context_save( XPTR( local_cxy , core->fpu_owner ) );
144        }
145        }
146
147    // attach the FPU to the requesting thread
148        hal_fpu_context_restore( this->fpu_context );
149        core->fpu_owner = this;
150
151        return EXCP_NON_FATAL;
152
153}  // end hal_fpu_exception()
154
155//////////////////////////////////////////////////////////////////////////////////////////
156// This function is called when an MMU exception has been detected (IBE / DBE).
157// It get the relevant exception arguments from the MMU.
158// It signal a fatal error in case of illegal access. In case of page unmapped
159// it checks that the faulty address belongs to a registered vseg. It update the local
160// vseg list from the reference cluster if required, and signal a fatal user error
161// in case of illegal virtual address. Finally, it updates the local page table from the
162// reference cluster.
163//////////////////////////////////////////////////////////////////////////////////////////
164// @ this     : pointer on faulty thread descriptor.
165// @ is_ins   : IBE if true / DBE if false.
166// @ return EXCP_NON_FATAL / EXCP_USER_ERROR / EXCP_KERNEL_PANIC
167//////////////////////////////////////////////////////////////////////////////////////////
168error_t hal_mmu_exception( thread_t * this,
169                           uint32_t   excPC,
170                           bool_t     is_ins ) 
171{
172        process_t      * process;
173    error_t          error;
174
175    uint32_t         mmu_ins_excp_code;
176    uint32_t         mmu_ins_bad_vaddr;
177    uint32_t         mmu_dat_excp_code;
178    uint32_t         mmu_dat_bad_vaddr;
179
180    uint32_t         bad_vaddr;
181    uint32_t         excp_code;
182       
183    process = this->process;
184
185    // get relevant values from MMU
186        hal_get_mmu_excp( &mmu_ins_excp_code,
187                          &mmu_ins_bad_vaddr,
188                          &mmu_dat_excp_code, 
189                          &mmu_dat_bad_vaddr );
190
191    // get exception code and faulty vaddr, depending on IBE/DBE
192    if( is_ins )
193    {
194        excp_code = mmu_ins_excp_code;
195        bad_vaddr = mmu_ins_bad_vaddr;
196    }
197    else 
198    {
199        excp_code = mmu_dat_excp_code;
200        bad_vaddr = mmu_dat_bad_vaddr;
201    }
202
203#if CONFIG_DEBUG_HAL_EXCEPTIONS
204uint32_t cycle = (uint32_t)hal_get_cycles();
205if( CONFIG_DEBUG_HAL_EXCEPTIONS < cycle )
206printk("\n[DBG] %s : thread %x enter / is_ins %d / %s / vaddr %x / cycle %d\n",
207__FUNCTION__, this, is_ins, hal_mmu_exception_str(excp_code), bad_vaddr, cycle );
208#endif
209
210   // analyse exception code
211    switch( excp_code )
212    {
213        case MMU_WRITE_PT1_UNMAPPED:      // non fatal
214        case MMU_WRITE_PT2_UNMAPPED:
215        case MMU_READ_PT1_UNMAPPED:
216        case MMU_READ_PT2_UNMAPPED:
217        {
218            // try to map the unmapped PTE
219            error = vmm_handle_page_fault( process, 
220                                           bad_vaddr >> CONFIG_PPM_PAGE_SHIFT );  // vpn
221            if( error )   
222            {
223                printk("\n[ERROR] in %s for thread %x : cannot map vaddr = %x\n",
224                __FUNCTION__ , this->trdid , bad_vaddr );
225
226                        return EXCP_USER_ERROR;
227            } 
228            else            // page fault successfull
229            {
230
231#if CONFIG_DEBUG_HAL_EXCEPTIONS
232cycle = (uint32_t)hal_get_cycles();
233if( CONFIG_DEBUG_HAL_EXCEPTIONS < cycle )
234printk("\n[DBG] %s : thread %x exit / page-fault handled for vaddr = %x\n",
235__FUNCTION__ , this , bad_vaddr );
236#endif
237 
238                return EXCP_NON_FATAL;
239            }
240        }
241        case MMU_WRITE_PRIVILEGE_VIOLATION:  // illegal access user error
242        case MMU_READ_PRIVILEGE_VIOLATION:
243        {
244            printk("\n[ERROR] in %s for thread %x : illegal user access to vaddr = %x\n",
245            __FUNCTION__ , this->trdid , bad_vaddr );
246
247            return EXCP_USER_ERROR;
248        }
249        case MMU_WRITE_ACCESS_VIOLATION:     // user error, or Copy-on-Write
250        {
251            // access page table to get GPT_COW flag
252            bool_t cow = hal_gpt_pte_is_cow( &(process->vmm.gpt),
253                                             bad_vaddr >> CONFIG_PPM_PAGE_SHIFT ); 
254
255            if( cow )                        // Copy-on-Write
256            {
257                // try to allocate and copy the page
258                error = vmm_handle_cow( process,
259                                        bad_vaddr >> CONFIG_PPM_PAGE_SHIFT ); 
260                if( error )
261                {
262                    printk("\n[ERROR] in %s for thread %x : cannot cow vaddr = %x\n",
263                    __FUNCTION__ , this->trdid , bad_vaddr );
264
265                            return EXCP_USER_ERROR;
266                }
267                else         // Copy on write successfull
268                {
269
270#if CONFIG_DEBUG_HAL_EXCEPTIONS
271cycle = (uint32_t)hal_get_cycles();
272if( CONFIG_DEBUG_HAL_EXCEPTIONS < cycle )
273printk("\n[DBG] %s : thread %x exit / copy-on-write handled for vaddr = %x\n",
274__FUNCTION__ , this , bad_vaddr );
275#endif
276
277                    return EXCP_NON_FATAL;
278                } 
279            }
280            else                             // non writable user error
281            {
282                printk("\n[ERROR] in %s for thread %x : non-writable vaddr = %x\n",
283                __FUNCTION__ , this->trdid , bad_vaddr );
284
285                return EXCP_USER_ERROR;
286            }
287        }
288        case MMU_READ_EXEC_VIOLATION:        // user error
289        {
290            printk("\n[ERROR] in %s for thread %x : read to non-executable vaddr = %x\n",
291            __FUNCTION__ , this->trdid , bad_vaddr );
292
293            return EXCP_USER_ERROR;
294        }
295        default:                             // this is a kernel error => panic   
296        {
297            assert( false , __FUNCTION__ , "thread %x / epc %x / %s / vaddr = %x\n",
298            this, excPC, hal_mmu_exception_str(excp_code) , bad_vaddr );
299
300            return EXCP_KERNEL_PANIC;
301        }
302    } 
303} // end hal_mmu_exception()
304
305//////////////////////////////////////////////////////////////////////////////////////////
306// This static function prints on the kernel terminal the saved context (core registers)
307// and the thread state of a faulty thread.
308//////////////////////////////////////////////////////////////////////////////////////////
309// @ this     : pointer on faulty thread descriptor.
310// @ uzone    : pointer on register array.
311// @ error    : EXCP_USER_ERROR or EXCP_KERNEL_PANIC
312//////////////////////////////////////////////////////////////////////////////////////////
313static void hal_exception_dump( thread_t * this,
314                                reg_t    * uzone,
315                                error_t    error )
316{
317    uint32_t    save_sr;
318    core_t    * core    = this->core;
319    process_t * process = this->process;
320
321    // get pointers on TXT0 chdev
322    xptr_t    txt0_xp  = chdev_dir.txt_tx[0];
323    cxy_t     txt0_cxy = GET_CXY( txt0_xp );
324    chdev_t * txt0_ptr = GET_PTR( txt0_xp );
325
326    // get extended pointer on remote TXT0 chdev lock
327    xptr_t  lock_xp = XPTR( txt0_cxy , &txt0_ptr->wait_lock );
328
329    // get TXT0 lock in busy waiting mode
330    remote_spinlock_lock_busy( lock_xp , &save_sr );
331
332    if( error == EXCP_USER_ERROR )
333    {
334        nolock_printk("\n=== USER ERROR / trdid %x / pid %x / core[%x,%d] / cycle %d ===\n",
335        this->trdid, process->pid, local_cxy, core->lid , (uint32_t)hal_get_cycles() );
336    }
337    else
338    {
339        nolock_printk("\n=== KERNEL PANIC / trdid %x / pid %x / core[%x,%d] / cycle %d ===\n",
340        this->trdid, process->pid, local_cxy, core->lid , (uint32_t)hal_get_cycles() );
341    }
342
343        nolock_printk("local locks = %d / remote locks = %d / blocked_vector = %X\n\n",
344    this->local_locks, this->remote_locks, this->blocked );
345
346    nolock_printk("c0_cr   %X  c0_epc  %X  c0_sr  %X  c0_th  %X\n",
347    uzone[UZ_CR], uzone[UZ_EPC], uzone[UZ_SR], uzone[UZ_TH] );
348
349    nolock_printk("c2_mode %X  c2_ptpr %X\n",
350    uzone[UZ_MODE], uzone[UZ_PTPR] );
351
352    nolock_printk("at_01   %X  v0_2    %X  v1_3   %X  a0_4   %X  a1_5   %X\n",
353        uzone[UZ_AT], uzone[UZ_V0], uzone[UZ_V1], uzone[UZ_A0], uzone[UZ_A1] );
354
355    nolock_printk("a2_6    %X  a3_7    %X  t0_8   %X  t1_9   %X  t2_10  %X\n",
356        uzone[UZ_A2], uzone[UZ_A3], uzone[UZ_T0], uzone[UZ_T1], uzone[UZ_T2] );
357 
358    nolock_printk("t3_11   %X  t4_12   %X  t5_13  %X  t6_14  %X  t7_15  %X\n",
359        uzone[UZ_T3], uzone[UZ_T4], uzone[UZ_T5], uzone[UZ_T6], uzone[UZ_T7] );
360
361    nolock_printk("s0_16   %X  s1_17   %X  s2_18  %X  s3_19  %X  s4_20  %X\n",
362        uzone[UZ_S0], uzone[UZ_S1], uzone[UZ_S2], uzone[UZ_S3], uzone[UZ_S4] );
363 
364    nolock_printk("s5_21   %X  s6_22   %X  s7_23  %X  s8_24  %X  ra_25  %X\n",
365        uzone[UZ_S5], uzone[UZ_S6], uzone[UZ_S7], uzone[UZ_T8], uzone[UZ_T9] );
366
367    nolock_printk("gp_28   %X  sp_29   %X  S8_30  %X  ra_31  %X\n",
368        uzone[UZ_GP], uzone[UZ_SP], uzone[UZ_S8], uzone[UZ_RA] );
369
370    // release the lock
371    remote_spinlock_unlock_busy( lock_xp , save_sr );
372
373}  // end hal_exception_dump()
374
375///////////////////////
376void hal_do_exception()
377{
378    uint32_t   * uzone;
379    thread_t   * this;
380        error_t      error;
381        uint32_t     excCode;                  // 4 bits XCODE from CP0_CR
382        uint32_t     excPC;                    // fauty instruction address
383
384    // get pointer on faulty thread uzone
385    this  = CURRENT_THREAD;
386    uzone = (uint32_t *)CURRENT_THREAD->uzone_current;
387
388    // get XCODE and EPC from UZONE
389        excCode        = (uzone[UZ_CR] >> 2) & 0xF;
390    excPC          = uzone[UZ_EPC];
391
392#if CONFIG_DEBUG_HAL_EXCEPTIONS
393uint32_t cycle = (uint32_t)hal_get_cycles();
394if( CONFIG_DEBUG_HAL_EXCEPTIONS < cycle )
395printk("\n[DBG] %s : thread %x enter / core[%x,%d] / pid %x / epc %x / xcode %x / cycle %d\n",
396__FUNCTION__, this, local_cxy, this->core->lid, this->process->pid, excPC, excCode, cycle );
397#endif
398
399        switch(excCode)
400        {
401        case XCODE_DBE:     // can be non fatal
402        {
403                    error = hal_mmu_exception( this , excPC , false );  // data MMU exception
404            break;
405        }
406            case XCODE_IBE:     // can be non fatal
407        {
408                    error = hal_mmu_exception( this , excPC , true );   // ins MMU exception
409                    break;
410        }
411            case XCODE_CPU:    // can be non fatal
412        {
413            if( ((uzone[UZ_CR] >> 28) & 0x3) == 1 )     // unavailable FPU
414            {
415                error = hal_fpu_exception( this );
416            }
417            else
418            {
419                        error = EXCP_USER_ERROR;
420            }
421                    break;
422        }
423        case XCODE_OVR:    // user fatal error
424        case XCODE_RI:     // user fatal error
425        case XCODE_ADEL:   // user fatal error
426        case XCODE_ADES:   // user fatal error
427        {
428                    error = EXCP_USER_ERROR;
429                break;
430        }
431        default:
432        {
433                    error = EXCP_KERNEL_PANIC;
434        }
435        }
436   
437    // analyse error code
438        if( error == EXCP_USER_ERROR )          //  user error => kill user process
439        {
440        hal_exception_dump( this , uzone , error );
441
442        sys_kill( this->process->pid , SIGKILL );
443        }
444    else if( error == EXCP_KERNEL_PANIC )   // kernel error => kernel panic
445    {
446        hal_exception_dump( this , uzone , error );
447
448        assert( false , __FUNCTION__ , "thread %x in process %x on core [%x,%d]",
449        this->trdid , this->process->pid , local_cxy , this->core->lid );
450    }
451
452#if CONFIG_DEBUG_HAL_EXCEPTIONS
453cycle = (uint32_t)hal_get_cycles();
454if( CONFIG_DEBUG_HAL_EXCEPTIONS < cycle )
455printk("\n[DBG] %s : thread %x exit / core[%x,%d] / pid %x / epc %x / xcode %x / cycle %d\n",
456__FUNCTION__, this, local_cxy, this->core->lid, this->process->pid, excPC, excCode, cycle );
457#endif
458
459}  // end hal_do_exception()
460
461
Note: See TracBrowser for help on using the repository browser.