source: trunk/hal/tsar_mips32/drivers/soclib_bdv.c @ 353

Last change on this file since 353 was 296, checked in by alain, 7 years ago

Several modifs in the generic scheduler and in the hal_context to
fix the context switch mechanism.

File size: 6.2 KB
Line 
1/*
2 * soclib_bdv.c - soclib simple block device driver implementation.
3 *
4 * Author     Alain Greiner (2016)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH.is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH.is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH.; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#include <chdev.h>
25#include <dev_ioc.h>
26#include <soclib_bdv.h>
27#include <printk.h>
28#include <thread.h>
29#include <spinlock.h>
30
31
32///////////////////////////////////////
33void soclib_bdv_init( chdev_t * chdev )
34{
35    // get extended pointer on SOCLIB_BDV peripheral base address
36        xptr_t  bdv_xp = chdev->base;
37
38    // set driver specific fields
39    chdev->cmd = &soclib_bdv_cmd;
40    chdev->isr = &soclib_bdv_isr;
41
42    // get hardware device cluster and local pointer
43    cxy_t      bdv_cxy  = GET_CXY( bdv_xp );
44    uint32_t * bdv_ptr  = (uint32_t *)GET_PTR( bdv_xp );
45
46    // get block_size and block_count 
47        uint32_t block_size = hal_remote_lw( XPTR( bdv_cxy , bdv_ptr + BDV_BLOCK_SIZE_REG ) );
48        uint32_t block_count = hal_remote_lw( XPTR( bdv_cxy , bdv_ptr + BDV_SIZE_REG ) );
49
50    // set IOC device descriptor extension
51    chdev->ext.ioc.size  = block_size;
52    chdev->ext.ioc.count = block_count;
53
54} // end soclib_bdv_init()
55
56
57//////////////////////////////////////////////////////////////
58void __attribute__ ((noinline)) soclib_bdv_cmd( xptr_t th_xp )
59{
60    uint32_t   cmd_type;    // IOC_READ / IOC_WRITE / IOC_SYNC_READ
61    uint32_t   lba;
62    uint32_t   count;
63    xptr_t     buf_xp;
64    xptr_t     ioc_xp;
65
66    // get client thread cluster and local pointer
67    cxy_t      th_cxy = GET_CXY( th_xp );
68    thread_t * th_ptr = (thread_t *)GET_PTR( th_xp );
69
70    // get command arguments and extended pointer on IOC device
71    cmd_type =         hal_remote_lw ( XPTR( th_cxy , &th_ptr->ioc_cmd.type   ) );
72    lba      =         hal_remote_lw ( XPTR( th_cxy , &th_ptr->ioc_cmd.lba    ) );
73    count    =         hal_remote_lw ( XPTR( th_cxy , &th_ptr->ioc_cmd.count  ) );
74    buf_xp   = (xptr_t)hal_remote_lwd( XPTR( th_cxy , &th_ptr->ioc_cmd.buf_xp ) );
75    ioc_xp   = (xptr_t)hal_remote_lwd( XPTR( th_cxy , &th_ptr->ioc_cmd.dev_xp ) );
76
77    // get IOC device cluster and local pointer
78    cxy_t      ioc_cxy = GET_CXY( ioc_xp );
79    chdev_t  * ioc_ptr = (chdev_t *)GET_PTR( ioc_xp );
80
81    // get extended pointer on SOCLIB-BDV peripheral
82    xptr_t     bdv_xp = hal_remote_lw( XPTR( ioc_cxy , &ioc_ptr->base ) );
83
84    // get SOCLIB_BDV device cluster and local pointer
85    cxy_t      bdv_cxy = GET_CXY( bdv_xp );
86    uint32_t * bdv_ptr = (uint32_t *)GET_PTR( bdv_xp );
87
88    // split buffer address in two 32 bits words
89    uint32_t   buf_lsb = (uint32_t)(buf_xp);
90    uint32_t   buf_msb = (uint32_t)(buf_xp>>32);
91
92    // set operation
93    uint32_t   op;
94    if( cmd_type == IOC_WRITE ) op = BDV_OP_WRITE; 
95    else                        op = BDV_OP_READ;
96
97    // set SOCLIB_BDV registers to start one I/O operation
98    hal_remote_sw( XPTR( bdv_cxy , bdv_ptr + BDV_IRQ_ENABLE_REG ) , 1       );
99    hal_remote_sw( XPTR( bdv_cxy , bdv_ptr + BDV_BUFFER_REG     ) , buf_lsb ); 
100    hal_remote_sw( XPTR( bdv_cxy , bdv_ptr + BDV_BUFFER_EXT_REG ) , buf_msb ); 
101    hal_remote_sw( XPTR( bdv_cxy , bdv_ptr + BDV_LBA_REG        ) , lba     );
102    hal_remote_sw( XPTR( bdv_cxy , bdv_ptr + BDV_COUNT_REG      ) , count   );
103    hal_remote_sw( XPTR( bdv_cxy , bdv_ptr + BDV_OP_REG         ) , op      );
104
105    // waiting policy  depends on the command type
106
107    if( cmd_type == IOC_SYNC_READ )                  // polling policy
108    {
109        uint32_t status;
110        while (1)
111        {
112            status = hal_remote_lw( XPTR( bdv_cxy , bdv_ptr + BDV_STATUS_REG ) );
113
114            if( status == BDV_READ_SUCCESS ) // successfully completed
115            {
116                hal_remote_sw( XPTR( th_cxy , &th_ptr->ioc_cmd.error ) , 0 );
117                break;
118            }
119            else if( status == BDV_BUSY )   // non completed
120            {
121                continue;
122            }
123            else                            // error reported
124            {
125                hal_remote_sw( XPTR( th_cxy , &th_ptr->ioc_cmd.error ) , 1 );
126                break;
127            }
128        }
129    }
130    else                                            // descheduling + IRQ policy
131    { 
132        thread_block( CURRENT_THREAD , THREAD_BLOCKED_DEV_ISR );
133        sched_yield( NULL );
134    }
135   
136} // end soclib_bdv_cmd()
137
138
139/////////////////////////////////////////////////////////////////
140void __attribute__ ((noinline)) soclib_bdv_isr( chdev_t * chdev )
141{
142    // get extended pointer on client thread
143    xptr_t root = XPTR( local_cxy , &chdev->wait_root );
144    xptr_t client_xp = XLIST_FIRST_ELEMENT( root , thread_t , wait_list );
145
146    // get extended pointer on server thread
147    xptr_t server_xp = XPTR( local_cxy , &chdev->server );
148
149    // get client thread cluster and local pointer
150    cxy_t      client_cxy = GET_CXY( client_xp );
151    thread_t * client_ptr = (thread_t *)GET_PTR( client_xp );
152
153    // get SOCLIB_BDV device cluster and local pointer
154    cxy_t      bdv_cxy  = GET_CXY( chdev->base );
155    uint32_t * bdv_ptr  = (uint32_t *)GET_PTR( chdev->base );
156
157    // get BDV status register and acknowledge IRQ
158        uint32_t status = hal_remote_lw( XPTR( bdv_cxy , bdv_ptr + BDV_STATUS_REG ) );   
159
160    // set operation status in command
161        if((status != BDV_READ_SUCCESS) && (status != BDV_WRITE_SUCCESS)) 
162    {
163        hal_remote_sw( XPTR( client_cxy , &client_ptr->ioc_cmd.error ) , 1 );
164    }
165        else
166    {
167        hal_remote_sw( XPTR( client_cxy , &client_ptr->ioc_cmd.error ) , 0 );
168    }
169
170    // unblock server thread
171    thread_unblock( server_xp , THREAD_BLOCKED_DEV_ISR );
172
173    // unblock client thread
174    thread_unblock( client_xp , THREAD_BLOCKED_IO );
175
176} // end soclib_bdv_isr()
177
178
179
Note: See TracBrowser for help on using the repository browser.