source: trunk/kernel/devices/dev_ioc.h @ 6

Last change on this file since 6 was 3, checked in by alain, 7 years ago

Introduce dev_fbf, dev dma, dev_iob

File size: 7.6 KB
Line 
1/*
2 * dev_ioc.h - IOC (Block Device Controler) generic device API definition.
3 *
4 * Author  Alain Greiner    (2016)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-kernel; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#ifndef _DEV_IOC_H
25#define _DEV_IOC_H
26
27#include <almos_config.h>
28#include <hal_types.h>
29
30/****  Forward declarations  ****/
31
32struct chdev_s;
33
34/*****************************************************************************************
35 *     Generic Block Device Controler definition
36 *
37 * This device provide access to an external mass storage peripheral such as a
38 * magnetic hard disk or a SD card, that can store blocks of data in a linear array
39 * of sectors indexed by a simple lba (logic block address).
40 * It supports two command types:
41 * - READ  : move a given number of contiguous blocks from device to a memory buffer.
42 * - WRITE : move a given number of contiguous blocks from a memory buffer to device.
43 *
44 * An I/O operation requires dynamic ressource allocation, and is always blocking for
45 * the client thread. The general scenario is detailed below.
46 * A) the client thread start the I/O operation, by calling the dev_ioc_read()
47 *    or the dev_ioc_write() kernel functions that perform the following actions:
48 *    1) it get a free WTI mailbox from the client cluster WTI allocator.
49 *    2) it enables the WTI IRQ on the client cluster ICU and update interrupt vector.
50 *    3) it access the PIC to link the WTI mailbox to the IOC IRQ.
51 *    4) it builds the command descriptor.
52 *    5) it registers in the IOCdevice waiting queue.
53 *    6) itblock on the THREAD_BLOCKED_IO condition and deschedule.
54 * B) The server thread attached to the IOC device descriptor handles the commands
55 *    registered in the waiting queue, calling the IOC driver function.
56 *    Most hardware implementation have a DMA capability, but some implementations,
57 *    such as the RDK (Ram Disk) implementation does not use DMA.
58 * C) The ISR signaling the I/O operation completion reactivates the client thread,
59 *    that releases the allocated resources:
60 *    1) access the PIC to unlink the IOC IRQ.
61 *    2) disable the WTI IRQ in the client cluster ICU and update interrupt vector.
62 *    3) release the WTI mailbox to the client cluster WTI allocator.
63 *****************************************************************************************/
64
65/******************************************************************************************
66 * This defines the (implementation independant) extension for the generic IOC device.
67 *****************************************************************************************/
68
69typedef struct ioc_extend_s
70{
71    uint32_t    size;      /*! number of bytes in a block                               */
72    uint32_t    count;     /*! total number of blocks in physical device                */
73}
74ioc_extend_t;
75
76/******************************************************************************************
77 * This enum defines the various implementations of the generic IOC peripheral.
78 * It must be kept consistent with the define in arch_info.h file.
79 *****************************************************************************************/
80
81enum ioc_impl_e
82{
83    IMPL_IOC_BDV =   0,     
84    IMPL_IOC_HBA =   1, 
85    IMPL_IOC_SDC =   2,
86    IMPL_IOC_SPI =   3,
87    IMPL_IOC_RDK =   4,
88}
89ioc_impl_t;
90
91/******************************************************************************************
92 * This defines the (implementation independant)  command passed to the driver.
93 *****************************************************************************************/
94
95typedef struct ioc_command_s
96{
97    xptr_t      dev_xp;      /*! extended pointer on device descriptor                    */
98    uint32_t    to_mem;     /*! requested operation (WRITE if zero / READ if non-zero)   */
99    uint32_t    lba;        /*! first block index                                        */
100    uint32_t    count;      /*! number of blocks                                         */
101    xptr_t      buf_xp;     /*! extended pointer on memory buffer                        */
102    uint32_t    error;      /*! operation status (0 if success)                          */
103}
104ioc_command_t;
105
106/******************************************************************************************
107 * This function completes the IOC chdev descriptor initialisation,
108 * namely the link with the implementation specific driver.
109 * The func, impl, channel, is_rx, base fields have been previously initialised.
110 * It calls the specific driver initialisation function, to initialise the hardware
111 * device and the specific data structures when required.
112 * It creates the associated server thread and allocates a WTI from local ICU.
113 * It must de executed by a local thread.
114 ******************************************************************************************
115 * @ chdev     : local pointer on IOC chdev descriptor.
116 *****************************************************************************************/
117void dev_ioc_init( struct chdev_s * chdev );
118
119/******************************************************************************************
120 * This blocking function try to tranfer one or several contiguous blocks of data
121 * from the block device to a memory buffer. The corresponding request is actually
122 * registered in the device pending request queue, and the calling thread is descheduled,
123 * waiting on transfer completion. It will be resumed by the IRQ signaling completion.
124 * It must be called in the client cluster.
125 ******************************************************************************************
126 * @ buffer    : local pointer on target buffer in memory.
127 * @ lba       : first block index on device.
128 * @ count     : number of blocks to transfer.
129 * @ returns 0 if success / returns EINVAL if error.
130 *****************************************************************************************/
131error_t dev_ioc_read( char         * buffer,
132                      uint32_t       lba,
133                      uint32_t       count );
134
135/******************************************************************************************
136 * This blocking function try to tranfer one or several contiguous blocks of data
137 * from a memory buffer to the block device. The corresponding request is actually
138 * registered in the device pending request queue, and the calling thread is descheduled,
139 * waiting on transfer completion. It will be resumed by the IRQ signaling completion.
140 * It must be called in the client cluster.
141 ******************************************************************************************
142 * @ buffer    : local pointer on source buffer in memory.
143 * @ lba       : first block index on device.
144 * @ count     : number of blocks to transfer.
145 * @ returns 0 if success / returns EINVAL if error.
146 *****************************************************************************************/
147error_t dev_ioc_write( char         * buffer,
148                       uint32_t       lba,
149                       uint32_t       count );
150
151#endif  /* _DEV_IOC_H */
Note: See TracBrowser for help on using the repository browser.