source: trunk/kernel/kern/kernel_init.c @ 581

Last change on this file since 581 was 580, checked in by alain, 5 years ago

1) Register the kernel process in the cluster manager local list.
2) Introduce a new service in idbg : display the set of busylocks taken by a given thread.

File size: 60.1 KB
Line 
1/*
2 * kernel_init.c - kernel parallel initialization
3 *
4 * Authors :  Mohamed Lamine Karaoui (2015)
5 *            Alain Greiner  (2016,2017)
6 *
7 * Copyright (c) Sorbonne Universites
8 *
9 * This file is part of ALMOS-MKH.
10 *
11 * ALMOS-MKH is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; version 2.0 of the License.
14 *
15 * ALMOS-MKH is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18 * General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
22 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
23 */
24
25#include <kernel_config.h>
26#include <errno.h>
27#include <hal_kernel_types.h>
28#include <hal_special.h>
29#include <hal_context.h>
30#include <hal_irqmask.h>
31#include <hal_macros.h>
32#include <hal_ppm.h>
33#include <barrier.h>
34#include <xbarrier.h>
35#include <remote_fifo.h>
36#include <core.h>
37#include <list.h>
38#include <xlist.h>
39#include <xhtab.h>
40#include <thread.h>
41#include <scheduler.h>
42#include <kmem.h>
43#include <cluster.h>
44#include <string.h>
45#include <memcpy.h>
46#include <ppm.h>
47#include <page.h>
48#include <chdev.h>
49#include <boot_info.h>
50#include <dqdt.h>
51#include <dev_mmc.h>
52#include <dev_dma.h>
53#include <dev_iob.h>
54#include <dev_ioc.h>
55#include <dev_txt.h>
56#include <dev_pic.h>
57#include <printk.h>
58#include <vfs.h>
59#include <devfs.h>
60#include <mapper.h>
61
62///////////////////////////////////////////////////////////////////////////////////////////
63// All the following global variables are replicated in all clusters.
64// They are initialised by the kernel_init() function.
65//
66// WARNING : The section names have been defined to control the base addresses of the
67// boot_info structure and the idle thread descriptors, through the kernel.ld script:
68// - the boot_info structure is built by the bootloader, and used by kernel_init.
69//   it must be the first object in the kdata segment.
70// - the array of idle threads descriptors must be placed on the first page boundary after
71//   the boot_info structure in the kdata segment.
72///////////////////////////////////////////////////////////////////////////////////////////
73
74// This variable defines the local boot_info structure
75__attribute__((section(".kinfo")))
76boot_info_t          boot_info;
77
78// This variable defines the "idle" threads descriptors array
79__attribute__((section(".kidle")))
80char                 idle_threads[CONFIG_THREAD_DESC_SIZE *
81                                   CONFIG_MAX_LOCAL_CORES]   CONFIG_PPM_PAGE_ALIGNED;
82
83// This variable defines the local cluster manager
84__attribute__((section(".kdata")))
85cluster_t            cluster_manager                         CONFIG_CACHE_LINE_ALIGNED;
86
87// This variable defines the TXT_TX[0] chdev
88__attribute__((section(".kdata")))
89chdev_t              txt0_tx_chdev                           CONFIG_CACHE_LINE_ALIGNED;
90
91// This variable defines the TXT_RX[0] chdev
92__attribute__((section(".kdata")))
93chdev_t              txt0_rx_chdev                           CONFIG_CACHE_LINE_ALIGNED;
94
95// This variables define the kernel process0 descriptor
96__attribute__((section(".kdata")))
97process_t            process_zero                            CONFIG_CACHE_LINE_ALIGNED;
98
99// This variable defines extended pointers on the distributed chdevs
100__attribute__((section(".kdata")))
101chdev_directory_t    chdev_dir                               CONFIG_CACHE_LINE_ALIGNED;
102
103// This variable contains the input IRQ indexes for the IOPIC controller
104__attribute__((section(".kdata")))
105iopic_input_t        iopic_input                             CONFIG_CACHE_LINE_ALIGNED;
106
107// This variable contains the input IRQ indexes for the LAPIC controller
108__attribute__((section(".kdata")))
109lapic_input_t        lapic_input                             CONFIG_CACHE_LINE_ALIGNED;
110
111// This variable defines the local cluster identifier
112__attribute__((section(".kdata")))
113cxy_t                local_cxy                               CONFIG_CACHE_LINE_ALIGNED;
114
115// This variable is used for CP0 cores synchronisation in kernel_init()
116__attribute__((section(".kdata")))
117xbarrier_t           global_barrier                          CONFIG_CACHE_LINE_ALIGNED;
118
119// This variable is used for local cores synchronisation in kernel_init()
120__attribute__((section(".kdata")))
121barrier_t            local_barrier                           CONFIG_CACHE_LINE_ALIGNED;
122
123// This variable defines the array of supported File System contexts
124__attribute__((section(".kdata")))
125vfs_ctx_t            fs_context[FS_TYPES_NR]                 CONFIG_CACHE_LINE_ALIGNED;
126
127// kernel_init is the entry point defined in hal/tsar_mips32/kernel.ld
128// It is used by the bootloader.
129extern void kernel_init( boot_info_t * info );
130
131// This array is used for debug, and describes the kernel locks usage,
132// It must be kept consistent with the defines in kernel_config.h file.
133char * lock_type_str[] =
134{
135    "unused_0",              //  0
136
137    "CLUSTER_KCM",           //  1
138    "PPM_FREE",              //  2
139    "SCHED_STATE",           //  3
140    "VMM_STACK",             //  4
141    "VMM_MMAP",              //  5
142    "VFS_CTX",               //  6
143    "KCM_STATE",             //  7
144    "KHM_STATE",             //  8
145    "HTAB_STATE",            //  9
146
147    "THREAD_JOIN",           // 10
148    "VFS_MAIN",              // 11
149    "CHDEV_QUEUE",           // 12
150    "CHDEV_TXT0",            // 13
151    "CHDEV_TXTLIST",         // 14
152    "PAGE_STATE",            // 15
153    "MUTEX_STATE",           // 16
154    "CONDVAR_STATE",         // 17
155    "SEM_STATE",             // 18
156    "XHTAB_STATE",           // 19
157
158    "unused_20",             // 20
159
160    "CLUSTER_PREFTBL",       // 21
161    "PPM_DIRTY",             // 22
162
163    "CLUSTER_LOCALS",        // 23
164    "CLUSTER_COPIES",        // 24
165    "PROCESS_CHILDREN",      // 25
166    "PROCESS_USERSYNC",      // 26
167    "PROCESS_FDARRAY",       // 27
168
169    "MAPPER_STATE",          // 28
170    "PROCESS_THTBL",         // 29
171
172    "PROCESS_CWD",           // 30
173    "VFS_INODE",             // 31
174    "VFS_FILE",              // 32
175    "VMM_VSL",               // 33
176};       
177
178// these debug variables are used to analyse the sys_read() and sys_write() syscalls timing
179
180#if DEBUG_SYS_READ
181uint32_t   enter_sys_read;
182uint32_t   exit_sys_read;
183
184uint32_t   enter_devfs_read;
185uint32_t   exit_devfs_read;
186
187uint32_t   enter_txt_read;
188uint32_t   exit_txt_read;
189
190uint32_t   enter_chdev_cmd_read;
191uint32_t   exit_chdev_cmd_read;
192
193uint32_t   enter_chdev_server_read;
194uint32_t   exit_chdev_server_read;
195
196uint32_t   enter_tty_cmd_read;
197uint32_t   exit_tty_cmd_read;
198
199uint32_t   enter_tty_isr_read;
200uint32_t   exit_tty_isr_read;
201#endif
202
203// these debug variables are used to analyse the sys_write() syscall timing
204
205#if DEBUG_SYS_WRITE   
206uint32_t   enter_sys_write;
207uint32_t   exit_sys_write;
208
209uint32_t   enter_devfs_write;
210uint32_t   exit_devfs_write;
211
212uint32_t   enter_txt_write;
213uint32_t   exit_txt_write;
214
215uint32_t   enter_chdev_cmd_write;
216uint32_t   exit_chdev_cmd_write;
217
218uint32_t   enter_chdev_server_write;
219uint32_t   exit_chdev_server_write;
220
221uint32_t   enter_tty_cmd_write;
222uint32_t   exit_tty_cmd_write;
223
224uint32_t   enter_tty_isr_write;
225uint32_t   exit_tty_isr_write;
226#endif
227
228// intrumentation variables : cumulated costs per syscall type in cluster
229uint32_t   syscalls_cumul_cost[SYSCALLS_NR];
230
231// intrumentation variables : number of syscalls per syscal type in cluster
232uint32_t   syscalls_occurences[SYSCALLS_NR];
233
234///////////////////////////////////////////////////////////////////////////////////////////
235// This function displays the ALMOS_MKH banner.
236///////////////////////////////////////////////////////////////////////////////////////////
237static void print_banner( uint32_t nclusters , uint32_t ncores )
238{
239    printk("\n"
240           "                    _        __    __     _____     ______         __    __    _   __   _     _   \n"
241           "          /\\       | |      |  \\  /  |   / ___ \\   / _____|       |  \\  /  |  | | / /  | |   | |  \n"
242           "         /  \\      | |      |   \\/   |  | /   \\ | | /             |   \\/   |  | |/ /   | |   | |  \n"
243           "        / /\\ \\     | |      | |\\  /| |  | |   | | | |_____   ___  | |\\  /| |  |   /    | |___| |  \n"
244           "       / /__\\ \\    | |      | | \\/ | |  | |   | | \\_____  \\ |___| | | \\/ | |  |   \\    |  ___  |  \n"
245           "      / ______ \\   | |      | |    | |  | |   | |       | |       | |    | |  | |\\ \\   | |   | |  \n"
246           "     / /      \\ \\  | |____  | |    | |  | \\___/ |  _____/ |       | |    | |  | | \\ \\  | |   | |  \n"
247           "    /_/        \\_\\ |______| |_|    |_|   \\_____/  |______/        |_|    |_|  |_|  \\_\\ |_|   |_|  \n"
248           "\n\n\t\t Advanced Locality Management Operating System / Multi Kernel Hybrid\n"
249           "\n\n\t\t %s / %d cluster(s) / %d core(s) per cluster\n\n",
250           CONFIG_ALMOS_VERSION , nclusters , ncores );
251}
252
253
254///////////////////////////////////////////////////////////////////////////////////////////
255// This function initializes the TXT_TX[0] and TXT_RX[0] chdev descriptors, implementing
256// the "kernel terminal", shared by all kernel instances for debug messages.
257// These chdev are implemented as global variables (replicated in all clusters),
258// because this terminal is used before the kmem allocator initialisation, but only
259// the chdevs in cluster 0 are registered in the "chdev_dir" directory.
260// As this TXT0 chdev supports only the TXT_SYNC_WRITE command, we don't create
261// a server thread, we don't allocate a WTI, and we don't initialize the waiting queue.
262// Note: The TXT_RX[0] chdev is created, but is not used by ALMOS-MKH (september 2018).
263///////////////////////////////////////////////////////////////////////////////////////////
264// @ info    : pointer on the local boot-info structure.
265///////////////////////////////////////////////////////////////////////////////////////////
266static void __attribute__ ((noinline)) txt0_device_init( boot_info_t * info )
267{
268    boot_device_t * dev_tbl;         // pointer on array of devices in boot_info
269    uint32_t        dev_nr;          // actual number of devices in this cluster
270    xptr_t          base;            // remote pointer on segment base
271    uint32_t        func;            // device functional index
272    uint32_t        impl;            // device implementation index
273    uint32_t        i;               // device index in dev_tbl
274    uint32_t        x;               // X cluster coordinate
275    uint32_t        y;               // Y cluster coordinate
276    uint32_t        channels;        // number of channels
277
278    // get number of peripherals and base of devices array from boot_info
279    dev_nr      = info->ext_dev_nr;
280    dev_tbl     = info->ext_dev;
281
282    // loop on external peripherals to find TXT device
283    for( i = 0 ; i < dev_nr ; i++ )
284    {
285        base        = dev_tbl[i].base;
286        func        = FUNC_FROM_TYPE( dev_tbl[i].type );
287        impl        = IMPL_FROM_TYPE( dev_tbl[i].type );
288        channels    = dev_tbl[i].channels;
289
290        if (func == DEV_FUNC_TXT )
291        {
292            // initialize TXT_TX[0] chdev
293            txt0_tx_chdev.func    = func;
294            txt0_tx_chdev.impl    = impl;
295            txt0_tx_chdev.channel = 0;
296            txt0_tx_chdev.base    = base;
297            txt0_tx_chdev.is_rx   = false;
298            remote_busylock_init( XPTR( local_cxy , &txt0_tx_chdev.wait_lock ),
299                                  LOCK_CHDEV_TXT0 );
300           
301            // initialize TXT_RX[0] chdev
302            txt0_rx_chdev.func    = func;
303            txt0_rx_chdev.impl    = impl;
304            txt0_rx_chdev.channel = 0;
305            txt0_rx_chdev.base    = base;
306            txt0_rx_chdev.is_rx   = true;
307            remote_busylock_init( XPTR( local_cxy , &txt0_rx_chdev.wait_lock ),
308                                  LOCK_CHDEV_TXT0 );
309           
310            // make TXT specific initialisations
311            dev_txt_init( &txt0_tx_chdev );                 
312            dev_txt_init( &txt0_rx_chdev );
313
314            // register TXT_TX[0] & TXT_RX[0] in chdev_dir[x][y]
315            // for all valid clusters             
316            for( x = 0 ; x < info->x_size ; x++ )
317            {
318                for( y = 0 ; y < info->y_size ; y++ )
319                {
320                    cxy_t cxy = HAL_CXY_FROM_XY( x , y );
321
322                    if( cluster_is_active( cxy ) )
323                    {
324                        hal_remote_s64( XPTR( cxy , &chdev_dir.txt_tx[0] ) ,
325                                        XPTR( local_cxy , &txt0_tx_chdev ) );
326                        hal_remote_s64( XPTR( cxy , &chdev_dir.txt_rx[0] ) ,
327                                        XPTR( local_cxy , &txt0_rx_chdev ) );
328                    }
329                }
330            }
331
332            hal_fence();
333        }
334        } // end loop on devices
335}  // end txt0_device_init()
336
337///////////////////////////////////////////////////////////////////////////////////////////
338// This function allocates memory and initializes the chdev descriptors for the internal
339// peripherals contained in the local cluster, other than the LAPIC, as specified by
340// the boot_info, including the linking with the driver for the specified implementation.
341// The relevant entries in all copies of the devices directory are initialised.
342///////////////////////////////////////////////////////////////////////////////////////////
343// @ info    : pointer on the local boot-info structure.
344///////////////////////////////////////////////////////////////////////////////////////////
345static void __attribute__ ((noinline)) internal_devices_init( boot_info_t * info )
346{
347    boot_device_t * dev_tbl;         // pointer on array of internaldevices in boot_info
348        uint32_t        dev_nr;          // actual number of devices in this cluster
349        xptr_t          base;            // remote pointer on segment base
350    uint32_t        func;            // device functionnal index
351    uint32_t        impl;            // device implementation index
352        uint32_t        i;               // device index in dev_tbl
353        uint32_t        x;               // X cluster coordinate
354        uint32_t        y;               // Y cluster coordinate
355        uint32_t        channels;        // number of channels
356        uint32_t        channel;         // channel index
357        chdev_t       * chdev_ptr;       // local pointer on created chdev
358
359    // get number of internal peripherals and base from boot_info
360        dev_nr  = info->int_dev_nr;
361    dev_tbl = info->int_dev;
362
363    // loop on internal peripherals
364        for( i = 0 ; i < dev_nr ; i++ )
365        {
366        base        = dev_tbl[i].base;
367        channels    = dev_tbl[i].channels;
368        func        = FUNC_FROM_TYPE( dev_tbl[i].type );
369        impl        = IMPL_FROM_TYPE( dev_tbl[i].type );
370 
371        //////////////////////////
372        if( func == DEV_FUNC_MMC ) 
373        {
374
375            // check channels
376            if( channels != 1 )
377            {
378                printk("\n[PANIC] in %s : MMC device must be single channel\n",
379                __FUNCTION__ );
380                hal_core_sleep();
381            }
382
383            // create chdev in local cluster
384            chdev_ptr = chdev_create( func,
385                                      impl,
386                                      0,          // channel
387                                      false,      // direction
388                                      base );
389
390            // check memory
391            if( chdev_ptr == NULL )
392            {
393                printk("\n[PANIC] in %s : cannot create MMC chdev\n",
394                __FUNCTION__ );
395                hal_core_sleep();
396            }
397           
398            // make MMC specific initialisation
399            dev_mmc_init( chdev_ptr );
400
401            // set the MMC field in all chdev_dir[x][y] structures
402            for( x = 0 ; x < info->x_size ; x++ )
403            {
404                for( y = 0 ; y < info->y_size ; y++ )
405                {
406                    cxy_t cxy = HAL_CXY_FROM_XY( x , y );
407
408                    if( cluster_is_active( cxy ) )
409                    {
410                        hal_remote_s64( XPTR( cxy , &chdev_dir.mmc[local_cxy] ), 
411                                        XPTR( local_cxy , chdev_ptr ) );
412                    }
413                }
414            }
415
416#if( DEBUG_KERNEL_INIT & 0x1 )
417if( hal_time_stamp() > DEBUG_KERNEL_INIT )
418printk("\n[DBG] %s : created MMC in cluster %x / chdev = %x\n",
419__FUNCTION__ , local_cxy , chdev_ptr );
420#endif
421        }
422        ///////////////////////////////
423        else if( func == DEV_FUNC_DMA )
424        {
425            // create one chdev per channel in local cluster
426            for( channel = 0 ; channel < channels ; channel++ )
427            {   
428                // create chdev[channel] in local cluster
429                chdev_ptr = chdev_create( func,
430                                          impl,
431                                          channel,
432                                          false,     // direction
433                                          base );
434
435                // check memory
436                if( chdev_ptr == NULL )
437                {
438                    printk("\n[PANIC] in %s : cannot create DMA chdev\n",
439                    __FUNCTION__ );
440                    hal_core_sleep();
441                }
442           
443                // make DMA specific initialisation
444                dev_dma_init( chdev_ptr );     
445
446                // initialize only the DMA[channel] field in the local chdev_dir[x][y]
447                // structure because the DMA device is not remotely accessible.
448                chdev_dir.dma[channel] = XPTR( local_cxy , chdev_ptr );
449
450#if( DEBUG_KERNEL_INIT & 0x1 )
451if( hal_time_stamp() > DEBUG_KERNEL_INIT )
452printk("\n[DBG] %s : created DMA[%d] in cluster %x / chdev = %x\n",
453__FUNCTION__ , channel , local_cxy , chdev_ptr );
454#endif
455            }
456        }
457    }
458}  // end internal_devices_init()
459
460///////////////////////////////////////////////////////////////////////////////////////////
461// This function allocates memory and initializes the chdev descriptors for the 
462// external (shared) peripherals other than the IOPIC, as specified by the boot_info.
463// This includes the dynamic linking with the driver for the specified implementation.
464// These chdev descriptors are distributed on all clusters, using a modulo on a global
465// index, identically computed in all clusters.
466// This function is executed in all clusters by the CP0 core, that computes a global index
467// for all external chdevs. Each CP0 core creates only the chdevs that must be placed in
468// the local cluster, because the global index matches the local index.
469// The relevant entries in all copies of the devices directory are initialised.
470///////////////////////////////////////////////////////////////////////////////////////////
471// @ info    : pointer on the local boot-info structure.
472///////////////////////////////////////////////////////////////////////////////////////////
473static void external_devices_init( boot_info_t * info )
474{
475    boot_device_t * dev_tbl;         // pointer on array of external devices in boot_info
476        uint32_t        dev_nr;          // actual number of external devices
477        xptr_t          base;            // remote pointer on segment base
478    uint32_t        func;            // device functionnal index
479    uint32_t        impl;            // device implementation index
480        uint32_t        i;               // device index in dev_tbl
481        uint32_t        x;               // X cluster coordinate
482        uint32_t        y;               // Y cluster coordinate
483        uint32_t        channels;        // number of channels
484        uint32_t        channel;         // channel index
485        uint32_t        directions;      // number of directions (1 or 2)
486        uint32_t        rx;              // direction index (0 or 1)
487    chdev_t       * chdev;           // local pointer on one channel_device descriptor
488    uint32_t        ext_chdev_gid;   // global index of external chdev
489
490    // get number of peripherals and base of devices array from boot_info
491    dev_nr      = info->ext_dev_nr;
492    dev_tbl     = info->ext_dev;
493
494    // initializes global index (PIC is already placed in cluster 0
495    ext_chdev_gid = 1;
496
497    // loop on external peripherals
498    for( i = 0 ; i < dev_nr ; i++ )
499    {
500        base     = dev_tbl[i].base;
501        channels = dev_tbl[i].channels;
502        func     = FUNC_FROM_TYPE( dev_tbl[i].type );
503        impl     = IMPL_FROM_TYPE( dev_tbl[i].type );
504
505        // There is one chdev per direction for NIC and for TXT
506        if((func == DEV_FUNC_NIC) || (func == DEV_FUNC_TXT)) directions = 2;
507        else                                                 directions = 1;
508
509        // do nothing for ROM, that does not require a device descriptor.
510        if( func == DEV_FUNC_ROM ) continue;
511
512        // do nothing for PIC, that is already initialized
513        if( func == DEV_FUNC_PIC ) continue;
514
515        // check PIC device initialized
516        if( chdev_dir.pic == XPTR_NULL )
517        {
518            printk("\n[PANIC] in %s : PIC device must be initialized first\n",
519            __FUNCTION__ );
520            hal_core_sleep();
521        }
522
523        // check external device functionnal type
524        if( (func != DEV_FUNC_IOB) && (func != DEV_FUNC_IOC) && (func != DEV_FUNC_TXT) &&
525            (func != DEV_FUNC_NIC) && (func != DEV_FUNC_FBF) )
526        {
527            printk("\n[PANIC] in %s : undefined peripheral type\n",
528            __FUNCTION__ );
529            hal_core_sleep();
530        }
531
532        // loops on channels
533        for( channel = 0 ; channel < channels ; channel++ )
534        {
535            // loop on directions
536            for( rx = 0 ; rx < directions ; rx++ )
537            {
538                // skip TXT0 that has already been initialized
539                if( (func == DEV_FUNC_TXT) && (channel == 0) ) continue;
540
541                // all kernel instances compute the target cluster for all chdevs,
542                // computing the global index ext_chdev_gid[func,channel,direction]
543                cxy_t target_cxy;
544                while( 1 )
545                {
546                    uint32_t offset     = ext_chdev_gid % ( info->x_size * info->y_size );
547                    uint32_t x          = offset / info->y_size;
548                    uint32_t y          = offset % info->y_size;
549
550                    target_cxy = HAL_CXY_FROM_XY( x , y );
551
552                    // exit loop if target cluster is active
553                    if( cluster_is_active( target_cxy ) ) break;
554               
555                    // increment global index otherwise
556                    ext_chdev_gid++;
557                }
558
559                // allocate and initialize a local chdev
560                // when local cluster matches target cluster
561                if( target_cxy == local_cxy )
562                {
563                    chdev = chdev_create( func,
564                                          impl,
565                                          channel,
566                                          rx,          // direction
567                                          base );
568
569                    if( chdev == NULL )
570                    {
571                        printk("\n[PANIC] in %s : cannot allocate chdev\n",
572                        __FUNCTION__ );
573                        hal_core_sleep();
574                    }
575
576                    // make device type specific initialisation
577                    if     ( func == DEV_FUNC_IOB ) dev_iob_init( chdev );
578                    else if( func == DEV_FUNC_IOC ) dev_ioc_init( chdev );
579                    else if( func == DEV_FUNC_TXT ) dev_txt_init( chdev );
580                    else if( func == DEV_FUNC_NIC ) dev_nic_init( chdev );
581                    else if( func == DEV_FUNC_FBF ) dev_fbf_init( chdev );
582
583                    // all external (shared) devices are remotely accessible
584                    // initialize the replicated chdev_dir[x][y] structures
585                    // defining the extended pointers on chdev descriptors
586                    xptr_t * entry;
587
588                    if(func==DEV_FUNC_IOB             ) entry  = &chdev_dir.iob;
589                    if(func==DEV_FUNC_IOC             ) entry  = &chdev_dir.ioc[channel];
590                    if(func==DEV_FUNC_FBF             ) entry  = &chdev_dir.fbf[channel];
591                    if((func==DEV_FUNC_TXT) && (rx==0)) entry  = &chdev_dir.txt_tx[channel];
592                    if((func==DEV_FUNC_TXT) && (rx==1)) entry  = &chdev_dir.txt_rx[channel];
593                    if((func==DEV_FUNC_NIC) && (rx==0)) entry  = &chdev_dir.nic_tx[channel];
594                    if((func==DEV_FUNC_NIC) && (rx==1)) entry  = &chdev_dir.nic_rx[channel];
595
596                    for( x = 0 ; x < info->x_size ; x++ )
597                    {
598                        for( y = 0 ; y < info->y_size ; y++ )
599                        {
600                            cxy_t cxy = HAL_CXY_FROM_XY( x , y );
601
602                            if( cluster_is_active( cxy ) )
603                            {
604                                hal_remote_s64( XPTR( cxy , entry ),
605                                                XPTR( local_cxy , chdev ) );
606                            }
607                        }
608                    }
609
610#if( DEBUG_KERNEL_INIT & 0x1 )
611if( hal_time_stamp() > DEBUG_KERNEL_INIT )
612printk("\n[DBG] %s : create chdev %s / channel = %d / rx = %d / cluster %x / chdev = %x\n",
613__FUNCTION__ , chdev_func_str( func ), channel , rx , local_cxy , chdev );
614#endif
615                }  // end if match
616
617                // increment chdev global index (matching or not)
618                ext_chdev_gid++;
619
620            } // end loop on directions
621        }  // end loop on channels
622        } // end loop on devices
623}  // end external_devices_init()
624
625///////////////////////////////////////////////////////////////////////////////////////////
626// This function is called by CP0 in cluster 0 to allocate memory and initialize the PIC
627// device, namely the informations attached to the external IOPIC controller, that
628// must be replicated in all clusters (struct iopic_input).
629// This initialisation must be done before other devices initialisation because the IRQ
630// routing infrastructure is required for both internal and external devices init.
631///////////////////////////////////////////////////////////////////////////////////////////
632// @ info    : pointer on the local boot-info structure.
633///////////////////////////////////////////////////////////////////////////////////////////
634static void __attribute__ ((noinline)) iopic_init( boot_info_t * info )
635{
636    boot_device_t * dev_tbl;         // pointer on boot_info external devices array
637        uint32_t        dev_nr;          // actual number of external devices
638        xptr_t          base;            // remote pointer on segment base
639    uint32_t        func;            // device functionnal index
640    uint32_t        impl;            // device implementation index
641        uint32_t        i;               // device index in dev_tbl
642    uint32_t        x;               // cluster X coordinate
643    uint32_t        y;               // cluster Y coordinate
644    bool_t          found;           // IOPIC found
645        chdev_t       * chdev;           // pointer on PIC chdev descriptor
646
647    // get number of external peripherals and base of array from boot_info
648        dev_nr      = info->ext_dev_nr;
649    dev_tbl     = info->ext_dev;
650
651    // avoid GCC warning
652    base        = XPTR_NULL;
653    impl        = 0;
654
655    // loop on external peripherals to get the IOPIC 
656        for( i = 0 , found = false ; i < dev_nr ; i++ )
657        {
658        func = FUNC_FROM_TYPE( dev_tbl[i].type );
659
660        if( func == DEV_FUNC_PIC )
661        {
662            base     = dev_tbl[i].base;
663            impl     = IMPL_FROM_TYPE( dev_tbl[i].type );
664            found    = true;
665            break;
666        }
667    }
668
669    // check PIC existence
670    if( found == false )
671    {
672        printk("\n[PANIC] in %s : PIC device not found\n",
673        __FUNCTION__ );
674        hal_core_sleep();
675    }
676
677    // allocate and initialize the PIC chdev in cluster 0
678    chdev = chdev_create( DEV_FUNC_PIC,
679                          impl,
680                          0,      // channel
681                          0,      // direction,
682                          base );
683
684    // check memory
685    if( chdev == NULL )
686    {
687        printk("\n[PANIC] in %s : no memory for PIC chdev\n",
688        __FUNCTION__ );
689        hal_core_sleep();
690    }
691
692    // make PIC device type specific initialisation
693    dev_pic_init( chdev );
694
695    // register, in all clusters, the extended pointer
696    // on PIC chdev in "chdev_dir" array
697    xptr_t * entry = &chdev_dir.pic;   
698               
699    for( x = 0 ; x < info->x_size ; x++ )
700    {
701        for( y = 0 ; y < info->y_size ; y++ )
702        {
703            cxy_t cxy = HAL_CXY_FROM_XY( x , y );
704
705            if( cluster_is_active( cxy ) )
706            {
707                hal_remote_s64( XPTR( cxy , entry ) , 
708                                XPTR( local_cxy , chdev ) );
709            }
710        }
711    }
712
713    // initialize, in all clusters, the "iopic_input" structure
714    // defining how external IRQs are connected to IOPIC
715
716    // register default value for unused inputs
717    for( x = 0 ; x < info->x_size ; x++ )
718    {
719        for( y = 0 ; y < info->y_size ; y++ )
720        {
721            cxy_t cxy = HAL_CXY_FROM_XY( x , y );
722
723            if( cluster_is_active( cxy ) )
724            {
725                hal_remote_memset( XPTR( cxy , &iopic_input ), 
726                                   0xFF , sizeof(iopic_input_t) );
727            }
728        }
729    }
730
731    // register input IRQ index for valid inputs
732    uint32_t   id;             // input IRQ index
733    uint8_t    valid;          // input IRQ is connected
734    uint32_t   type;           // source device type
735    uint8_t    channel;        // source device channel
736    uint8_t    is_rx;          // source device direction
737    uint32_t * ptr = NULL;     // local pointer on one field in iopic_input stucture
738
739    for( id = 0 ; id < CONFIG_MAX_EXTERNAL_IRQS ; id++ )
740    {
741        valid   = dev_tbl[i].irq[id].valid;
742        type    = dev_tbl[i].irq[id].dev_type;
743        channel = dev_tbl[i].irq[id].channel;
744        is_rx   = dev_tbl[i].irq[id].is_rx;
745        func    = FUNC_FROM_TYPE( type );
746
747        // get pointer on relevant field in iopic_input
748        if( valid )
749        {
750            if     ( func == DEV_FUNC_IOC )                 ptr = &iopic_input.ioc[channel]; 
751            else if((func == DEV_FUNC_TXT) && (is_rx == 0)) ptr = &iopic_input.txt_tx[channel];
752            else if((func == DEV_FUNC_TXT) && (is_rx != 0)) ptr = &iopic_input.txt_rx[channel];
753            else if((func == DEV_FUNC_NIC) && (is_rx == 0)) ptr = &iopic_input.nic_tx[channel];
754            else if((func == DEV_FUNC_NIC) && (is_rx != 0)) ptr = &iopic_input.nic_rx[channel];
755            else if( func == DEV_FUNC_IOB )                 ptr = &iopic_input.iob;
756            else
757            {
758                printk("\n[PANIC] in %s : illegal source device for IOPIC input\n",
759                __FUNCTION__ );
760                hal_core_sleep();
761            }
762
763            // set one entry in all "iopic_input" structures
764            for( x = 0 ; x < info->x_size ; x++ )
765            {
766                for( y = 0 ; y < info->y_size ; y++ )
767                {
768                    cxy_t cxy = HAL_CXY_FROM_XY( x , y );
769
770                    if( cluster_is_active( cxy ) )
771                    {
772                        hal_remote_s64( XPTR( cxy , ptr ) , id ); 
773                    }
774                }
775            }
776        }
777    } 
778
779#if( DEBUG_KERNEL_INIT & 0x1 )
780if( hal_tim_stamp() > DEBUG_KERNEL_INIT )
781{
782    printk("\n[DBG] %s created PIC chdev in cluster %x at cycle %d\n",
783    __FUNCTION__ , local_cxy , (uint32_t)hal_time_stamp() );
784    dev_pic_inputs_display();
785}
786#endif
787   
788}  // end iopic_init()
789
790///////////////////////////////////////////////////////////////////////////////////////////
791// This function is called by all CP0s in all cluster to complete the PIC device
792// initialisation, namely the informations attached to the LAPIC controller.
793// This initialisation must be done after the IOPIC initialisation, but before other
794// devices initialisation because the IRQ routing infrastructure is required for both
795// internal and external devices initialisation.
796///////////////////////////////////////////////////////////////////////////////////////////
797// @ info    : pointer on the local boot-info structure.
798///////////////////////////////////////////////////////////////////////////////////////////
799static void __attribute__ ((noinline)) lapic_init( boot_info_t * info )
800{
801    boot_device_t * dev_tbl;      // pointer on boot_info internal devices array
802    uint32_t        dev_nr;       // number of internal devices
803    uint32_t        i;            // device index in dev_tbl
804        xptr_t          base;         // remote pointer on segment base
805    uint32_t        func;         // device functionnal type in boot_info
806    bool_t          found;        // LAPIC found
807
808    // get number of internal peripherals and base
809        dev_nr      = info->int_dev_nr;
810    dev_tbl     = info->int_dev;
811
812    // loop on internal peripherals to get the lapic device
813        for( i = 0 , found = false ; i < dev_nr ; i++ )
814        {
815        func = FUNC_FROM_TYPE( dev_tbl[i].type );
816
817        if( func == DEV_FUNC_ICU )
818        {
819            base     = dev_tbl[i].base;
820            found    = true;
821            break;
822        }
823    }
824
825    // if the LAPIC controller is not defined in the boot_info,
826    // we simply don't initialize the PIC extensions in the kernel,
827    // making the assumption that the LAPIC related informations
828    // are hidden in the hardware specific PIC driver.
829    if( found )
830    {
831        // initialise the PIC extensions for
832        // the core descriptor and core manager extensions
833        dev_pic_extend_init( (uint32_t *)GET_PTR( base ) );
834
835        // initialize the "lapic_input" structure
836        // defining how internal IRQs are connected to LAPIC
837        uint32_t        id;
838        uint8_t         valid;
839        uint8_t         channel;
840        uint32_t        func;
841
842        for( id = 0 ; id < CONFIG_MAX_INTERNAL_IRQS ; id++ )
843        {
844            valid    = dev_tbl[i].irq[id].valid;
845            func     = FUNC_FROM_TYPE( dev_tbl[i].irq[id].dev_type );
846            channel  = dev_tbl[i].irq[id].channel;
847
848            if( valid ) // only valid local IRQs are registered
849            {
850                if     ( func == DEV_FUNC_MMC ) lapic_input.mmc = id;
851                else if( func == DEV_FUNC_DMA ) lapic_input.dma[channel] = id;
852                else
853                {
854                    printk("\n[PANIC] in %s : illegal source device for LAPIC input\n",
855                    __FUNCTION__ );
856                    hal_core_sleep();
857                }
858            }
859        }
860    }
861}  // end lapic_init()
862
863///////////////////////////////////////////////////////////////////////////////////////////
864// This static function returns the identifiers of the calling core.
865///////////////////////////////////////////////////////////////////////////////////////////
866// @ info    : pointer on boot_info structure.
867// @ lid     : [out] core local index in cluster.
868// @ cxy     : [out] cluster identifier.
869// @ lid     : [out] core global identifier (hardware).
870// @ return 0 if success / return EINVAL if not found.
871///////////////////////////////////////////////////////////////////////////////////////////
872static error_t __attribute__ ((noinline)) get_core_identifiers( boot_info_t * info,
873                                                                lid_t       * lid,
874                                                                cxy_t       * cxy,
875                                                                gid_t       * gid )
876{
877    uint32_t   i;
878    gid_t      global_id;
879
880    // get global identifier from hardware register
881    global_id = hal_get_gid();
882
883    // makes an associative search in boot_info to get (cxy,lid) from global_id
884    for( i = 0 ; i < info->cores_nr ; i++ )
885    {
886        if( global_id == info->core[i].gid )
887        {
888            *lid = info->core[i].lid;
889            *cxy = info->core[i].cxy;
890            *gid = global_id;
891            return 0;
892        }
893    }
894    return EINVAL;
895}
896
897///////////////////////////////////////////////////////////////////////////////////////////
898// This function is the entry point for the kernel initialisation.
899// It is executed by all cores in all clusters, but only core[0], called CP0,
900// initializes the shared resources such as the cluster manager, or the local peripherals.
901// To comply with the multi-kernels paradigm, it accesses only local cluster memory, using
902// only information contained in the local boot_info_t structure, set by the bootloader.
903// Only CP0 in cluster 0 print the log messages.
904///////////////////////////////////////////////////////////////////////////////////////////
905// @ info    : pointer on the local boot-info structure.
906///////////////////////////////////////////////////////////////////////////////////////////
907void kernel_init( boot_info_t * info )
908{
909    lid_t        core_lid = -1;             // running core local index
910    cxy_t        core_cxy = -1;             // running core cluster identifier
911    gid_t        core_gid;                  // running core hardware identifier
912    cluster_t  * cluster;                   // pointer on local cluster manager
913    core_t     * core;                      // pointer on running core descriptor
914    thread_t   * thread;                    // pointer on idle thread descriptor
915
916    xptr_t       vfs_root_inode_xp;         // extended pointer on VFS root inode
917    xptr_t       devfs_dev_inode_xp;        // extended pointer on DEVFS dev inode   
918    xptr_t       devfs_external_inode_xp;   // extended pointer on DEVFS external inode       
919    xptr_t       devfs_internal_inode_xp;   // extended pointer on DEVFS internal inode       
920
921    error_t      error;
922    reg_t        status;                    // running core status register
923
924    /////////////////////////////////////////////////////////////////////////////////
925    // STEP 0 : Each core get its core identifier from boot_info, and makes
926    //          a partial initialisation of its private idle thread descriptor.
927    //          CP0 initializes the "local_cxy" global variable.
928    //          CP0 in cluster IO initializes the TXT0 chdev to print log messages.
929    /////////////////////////////////////////////////////////////////////////////////
930
931    error = get_core_identifiers( info,
932                                  &core_lid,
933                                  &core_cxy,
934                                  &core_gid );
935
936    // CP0 initializes cluster identifier
937    if( core_lid == 0 ) local_cxy = info->cxy;
938
939    // each core gets a pointer on its private idle thread descriptor
940    thread = (thread_t *)( idle_threads + (core_lid * CONFIG_THREAD_DESC_SIZE) );
941
942    // each core registers this thread pointer in hardware register
943    hal_set_current_thread( thread );
944
945    // each core register core descriptor pointer in idle thread descriptor
946    thread->core = &LOCAL_CLUSTER->core_tbl[core_lid];
947
948    // each core initializes the idle thread locks counters
949    thread->busylocks = 0;
950
951#if DEBUG_BUSYLOCK
952    // each core initialise the idle thread list of busylocks
953    xlist_root_init( XPTR( local_cxy , &thread->busylocks_root ) );
954#endif
955
956    // CP0 initializes cluster info
957    if( core_lid == 0 ) cluster_info_init( info );
958
959    // CP0 in cluster 0 initialises TXT0 chdev descriptor
960    if( (core_lid == 0) && (core_cxy == 0) ) txt0_device_init( info );
961
962    /////////////////////////////////////////////////////////////////////////////////
963    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
964                                        (info->x_size * info->y_size) );
965    barrier_wait( &local_barrier , info->cores_nr );
966    /////////////////////////////////////////////////////////////////////////////////
967
968#if DEBUG_KERNEL_INIT
969// if( (core_lid ==  0) & (local_cxy == 0) )
970printk("\n[DBG] %s : exit barrier 0 : TXT0 initialized / sr %x / cycle %d\n",
971__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
972#endif
973
974    /////////////////////////////////////////////////////////////////////////////
975    // STEP 1 : all cores check core identifier.
976    //          CP0 initializes the local cluster manager.
977    //          This includes the memory allocators.
978    /////////////////////////////////////////////////////////////////////////////
979
980    // all cores check identifiers
981    if( error )
982    {
983        printk("\n[PANIC] in %s : illegal core : gid %x / cxy %x / lid %d",
984        __FUNCTION__, core_lid, core_cxy, core_lid );
985        hal_core_sleep();
986    }
987
988    // CP0 initializes cluster manager complex structures
989    if( core_lid == 0 )
990    {
991        error = cluster_manager_init( info );
992
993        if( error )
994        {
995             printk("\n[PANIC] in %s : cannot initialize cluster manager in cluster %x\n",
996             __FUNCTION__, local_cxy );
997             hal_core_sleep();
998        }
999    }
1000
1001    /////////////////////////////////////////////////////////////////////////////////
1002    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1003                                        (info->x_size * info->y_size) );
1004    barrier_wait( &local_barrier , info->cores_nr );
1005    /////////////////////////////////////////////////////////////////////////////////
1006
1007#if DEBUG_KERNEL_INIT
1008if( (core_lid ==  0) & (local_cxy == 0) ) 
1009printk("\n[DBG] %s : exit barrier 1 : clusters initialised / sr %x / cycle %d\n",
1010__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1011#endif
1012
1013    /////////////////////////////////////////////////////////////////////////////////
1014    // STEP 2 : CP0 initializes the process_zero descriptor.
1015    //          CP0 in cluster 0 initializes the IOPIC device.
1016    /////////////////////////////////////////////////////////////////////////////////
1017
1018    // all cores get pointer on local cluster manager & core descriptor
1019    cluster = &cluster_manager;
1020    core    = &cluster->core_tbl[core_lid];
1021
1022    // all CP0s initialize the process_zero descriptor
1023    if( core_lid == 0 ) process_zero_create( &process_zero );
1024
1025    // CP0 in cluster 0 initializes the PIC chdev,
1026    if( (core_lid == 0) && (local_cxy == 0) ) iopic_init( info );
1027   
1028    ////////////////////////////////////////////////////////////////////////////////
1029    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1030                                        (info->x_size * info->y_size) );
1031    barrier_wait( &local_barrier , info->cores_nr );
1032    ////////////////////////////////////////////////////////////////////////////////
1033
1034#if DEBUG_KERNEL_INIT
1035if( (core_lid ==  0) & (local_cxy == 0) ) 
1036printk("\n[DBG] %s : exit barrier 2 : PIC initialised / sr %x / cycle %d\n",
1037__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1038#endif
1039
1040    ////////////////////////////////////////////////////////////////////////////////
1041    // STEP 3 : CP0 initializes the distibuted LAPIC descriptor.
1042    //          CP0 initializes the internal chdev descriptors
1043    //          CP0 initialize the local external chdev descriptors
1044    ////////////////////////////////////////////////////////////////////////////////
1045
1046    // all CP0s initialize their local LAPIC extension,
1047    if( core_lid == 0 ) lapic_init( info );
1048
1049    // CP0 scan the internal (private) peripherals,
1050    // and allocates memory for the corresponding chdev descriptors.
1051    if( core_lid == 0 ) internal_devices_init( info );
1052       
1053
1054    // All CP0s contribute to initialise external peripheral chdev descriptors.
1055    // Each CP0[cxy] scan the set of external (shared) peripherals (but the TXT0),
1056    // and allocates memory for the chdev descriptors that must be placed
1057    // on the (cxy) cluster according to the global index value.
1058
1059    if( core_lid == 0 ) external_devices_init( info );
1060
1061    /////////////////////////////////////////////////////////////////////////////////
1062    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1063                                        (info->x_size * info->y_size) );
1064    barrier_wait( &local_barrier , info->cores_nr );
1065    /////////////////////////////////////////////////////////////////////////////////
1066
1067#if DEBUG_KERNEL_INIT
1068if( (core_lid ==  0) & (local_cxy == 0) ) 
1069printk("\n[DBG] %s : exit barrier 3 : all chdev initialised / sr %x / cycle %d\n",
1070__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1071#endif
1072
1073#if( DEBUG_KERNEL_INIT & 1 )
1074if( (core_lid ==  0) & (local_cxy == 0) ) 
1075chdev_dir_display();
1076#endif
1077   
1078    /////////////////////////////////////////////////////////////////////////////////
1079    // STEP 4 : All cores enable IPI (Inter Procesor Interrupt),
1080    //          Alh cores initialize IDLE thread.
1081    //          Only CP0 in cluster 0 creates the VFS root inode.
1082    //          It access the boot device to initialize the file system context.
1083    /////////////////////////////////////////////////////////////////////////////////
1084
1085    // All cores enable IPI
1086    dev_pic_enable_ipi();
1087    hal_enable_irq( &status );
1088
1089    // all cores initialize the idle thread descriptor
1090    thread_idle_init( thread,
1091                      THREAD_IDLE,
1092                      &thread_idle_func,
1093                      NULL,
1094                      core_lid );
1095
1096    // all cores unblock idle thread, and register it in scheduler
1097    thread_unblock( XPTR( local_cxy , thread ) , THREAD_BLOCKED_GLOBAL );
1098    core->scheduler.idle = thread;
1099
1100#if( DEBUG_KERNEL_INIT & 1 )
1101sched_display( core_lid );
1102#endif
1103
1104    // CPO in cluster 0 creates the VFS root
1105    if( (core_lid ==  0) && (local_cxy == 0 ) ) 
1106    {
1107        vfs_root_inode_xp = XPTR_NULL;
1108
1109        // File System must be FATFS in this implementation,
1110        // but other File System can be introduced here
1111        if( CONFIG_VFS_ROOT_IS_FATFS )
1112        {
1113            // 1. allocate memory for FATFS context in cluster 0
1114            fatfs_ctx_t * fatfs_ctx = fatfs_ctx_alloc();
1115
1116            if( fatfs_ctx == NULL )
1117            {
1118                printk("\n[PANIC] in %s : cannot create FATFS context in cluster 0\n",
1119                __FUNCTION__ );
1120                hal_core_sleep();
1121            }
1122
1123            // 2. access boot device to initialize FATFS context
1124            fatfs_ctx_init( fatfs_ctx );
1125 
1126            // 3. get various informations from FATFS context
1127            uint32_t root_dir_cluster = fatfs_ctx->root_dir_cluster;
1128            uint32_t cluster_size     = fatfs_ctx->bytes_per_sector * 
1129                                        fatfs_ctx->sectors_per_cluster;
1130            uint32_t total_clusters   = fatfs_ctx->fat_sectors_count << 7;
1131 
1132            // 4. initialize the FATFS entry in the vfs_context[] array
1133            vfs_ctx_init( FS_TYPE_FATFS,                               // fs type
1134                          0,                                           // attributes: unused
1135                              total_clusters,               
1136                              cluster_size,
1137                              vfs_root_inode_xp,                           // VFS root
1138                          fatfs_ctx );                                 // extend
1139
1140            // 5. create VFS root inode in cluster 0
1141            error = vfs_inode_create( XPTR_NULL,                           // dentry_xp
1142                                      FS_TYPE_FATFS,                       // fs_type
1143                                      INODE_TYPE_DIR,                      // inode_type
1144                                      (void *)(intptr_t)root_dir_cluster,  // extend
1145                                      0,                                   // attr
1146                                      0,                                   // rights
1147                                      0,                                   // uid
1148                                      0,                                   // gid
1149                                      &vfs_root_inode_xp );                // return
1150            if( error )
1151            {
1152                printk("\n[PANIC] in %s : cannot create VFS root inode in cluster 0\n",
1153                __FUNCTION__ );
1154                hal_core_sleep();
1155            }
1156
1157            // 6. update the FATFS entry in vfs_context[] array
1158            fs_context[FS_TYPE_FATFS].vfs_root_xp = vfs_root_inode_xp;
1159
1160            // 7. check FATFS initialization
1161            vfs_ctx_t   * vfs_ctx = &fs_context[FS_TYPE_FATFS];
1162
1163            if( ((fatfs_ctx_t *)vfs_ctx->extend)->sectors_per_cluster != 8 )
1164            {
1165                printk("\n[PANIC] in %s : illegal FATFS context in cluster 0\n",
1166                __FUNCTION__ );
1167                hal_core_sleep();
1168            }
1169               
1170        }
1171        else
1172        {
1173            printk("\n[PANIC] in %s : unsupported VFS type in cluster 0\n",
1174            __FUNCTION__ );
1175            hal_core_sleep();
1176        }
1177
1178        // register VFS root inode in process_zero descriptor of cluster 0
1179        process_zero.vfs_root_xp = vfs_root_inode_xp;
1180        process_zero.vfs_cwd_xp  = vfs_root_inode_xp;
1181    }
1182
1183    /////////////////////////////////////////////////////////////////////////////////
1184    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1185                                        (info->x_size * info->y_size) );
1186    barrier_wait( &local_barrier , info->cores_nr );
1187    /////////////////////////////////////////////////////////////////////////////////
1188
1189#if DEBUG_KERNEL_INIT
1190if( (core_lid ==  0) & (local_cxy == 0) ) 
1191printk("\n[DBG] %s : exit barrier 4 : VFS root initialized in cluster 0 / sr %x / cycle %d\n",
1192__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1193#endif
1194
1195    /////////////////////////////////////////////////////////////////////////////////
1196    // STEP 5 : Other CP0s allocate memory for the selected FS context,
1197    //          and initialise both the local FS context and the local VFS context
1198    //          from values stored in cluster 0.
1199    //          They get the VFS root inode extended pointer from cluster 0.
1200    /////////////////////////////////////////////////////////////////////////////////
1201
1202    if( (core_lid ==  0) && (local_cxy != 0) ) 
1203    {
1204        // File System must be FATFS in this implementation,
1205        // but other File System can be introduced here
1206        if( CONFIG_VFS_ROOT_IS_FATFS )
1207        {
1208            // 1. allocate memory for local FATFS context
1209            fatfs_ctx_t * local_fatfs_ctx = fatfs_ctx_alloc();
1210
1211            // check memory
1212            if( local_fatfs_ctx == NULL )
1213            {
1214                printk("\n[PANIC] in %s : cannot create FATFS context in cluster %x\n",
1215                __FUNCTION__ , local_cxy );
1216                hal_core_sleep();
1217            }
1218
1219            // 2. get local pointer on VFS context for FATFS
1220            vfs_ctx_t   * vfs_ctx = &fs_context[FS_TYPE_FATFS];
1221
1222            // 3. get local pointer on FATFS context in cluster 0
1223            fatfs_ctx_t * remote_fatfs_ctx = hal_remote_lpt( XPTR( 0 , &vfs_ctx->extend ) );
1224
1225            // 4. copy FATFS context from cluster 0 to local cluster
1226            hal_remote_memcpy( XPTR( local_cxy , local_fatfs_ctx ), 
1227                               XPTR( 0 ,         remote_fatfs_ctx ), sizeof(fatfs_ctx_t) );
1228
1229            // 5. copy VFS context from cluster 0 to local cluster
1230            hal_remote_memcpy( XPTR( local_cxy , vfs_ctx ), 
1231                               XPTR( 0 ,         vfs_ctx ), sizeof(vfs_ctx_t) );
1232
1233            // 6. update extend field in local copy of VFS context
1234            vfs_ctx->extend = local_fatfs_ctx;
1235
1236            if( ((fatfs_ctx_t *)vfs_ctx->extend)->sectors_per_cluster != 8 )
1237            {
1238                printk("\n[PANIC] in %s : illegal FATFS context in cluster %x\n",
1239                __FUNCTION__ , local_cxy );
1240                hal_core_sleep();
1241            }
1242        }
1243
1244        // get extended pointer on VFS root inode from cluster 0
1245        vfs_root_inode_xp = hal_remote_l64( XPTR( 0 , &process_zero.vfs_root_xp ) );
1246
1247        // update local process_zero descriptor
1248        process_zero.vfs_root_xp = vfs_root_inode_xp;
1249        process_zero.vfs_cwd_xp  = vfs_root_inode_xp;
1250    }
1251
1252    /////////////////////////////////////////////////////////////////////////////////
1253    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1254                                        (info->x_size * info->y_size) );
1255    barrier_wait( &local_barrier , info->cores_nr );
1256    /////////////////////////////////////////////////////////////////////////////////
1257
1258#if DEBUG_KERNEL_INIT
1259if( (core_lid ==  0) & (local_cxy == 1) ) 
1260printk("\n[DBG] %s : exit barrier 5 : VFS root initialized in cluster 1 / sr %x / cycle %d\n",
1261__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1262#endif
1263
1264    /////////////////////////////////////////////////////////////////////////////////
1265    // STEP 6 : CP0 in cluster 0 makes the global DEVFS tree initialisation:
1266    //          It initializes the DEVFS context, and creates the DEVFS
1267    //          "dev" and "external" inodes in cluster 0.
1268    /////////////////////////////////////////////////////////////////////////////////
1269
1270    if( (core_lid ==  0) && (local_cxy == 0) ) 
1271    {
1272        // 1. allocate memory for DEVFS context extension in cluster 0
1273        devfs_ctx_t * devfs_ctx = devfs_ctx_alloc();
1274
1275        if( devfs_ctx == NULL )
1276        {
1277            printk("\n[PANIC] in %s : cannot create DEVFS context in cluster 0\n",
1278            __FUNCTION__ , local_cxy );
1279            hal_core_sleep();
1280        }
1281
1282        // 2. initialize the DEVFS entry in the vfs_context[] array
1283        vfs_ctx_init( FS_TYPE_DEVFS,                                // fs type
1284                      0,                                            // attributes: unused
1285                          0,                                            // total_clusters: unused
1286                          0,                                            // cluster_size: unused
1287                          vfs_root_inode_xp,                            // VFS root
1288                      devfs_ctx );                                  // extend
1289
1290        // 3. create "dev" and "external" inodes (directories)
1291        devfs_global_init( process_zero.vfs_root_xp,
1292                           &devfs_dev_inode_xp,
1293                           &devfs_external_inode_xp );
1294
1295        // 4. initializes DEVFS context extension
1296        devfs_ctx_init( devfs_ctx,
1297                        devfs_dev_inode_xp,
1298                        devfs_external_inode_xp );
1299    }   
1300
1301    /////////////////////////////////////////////////////////////////////////////////
1302    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1303                                        (info->x_size * info->y_size) );
1304    barrier_wait( &local_barrier , info->cores_nr );
1305    /////////////////////////////////////////////////////////////////////////////////
1306
1307#if DEBUG_KERNEL_INIT
1308if( (core_lid ==  0) & (local_cxy == 0) ) 
1309printk("\n[DBG] %s : exit barrier 6 : DEVFS root initialized in cluster 0 / sr %x / cycle %d\n",
1310__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1311#endif
1312
1313    /////////////////////////////////////////////////////////////////////////////////
1314    // STEP 7 : All CP0s complete in parallel the DEVFS tree initialization.
1315    //          Each CP0 get the "dev" and "external" extended pointers from
1316    //          values stored in cluster 0.
1317    //          Then each CP0 in cluster(i) creates the DEVFS "internal" directory,
1318    //          and creates the pseudo-files for all chdevs in cluster (i).
1319    /////////////////////////////////////////////////////////////////////////////////
1320
1321    if( core_lid == 0 )
1322    {
1323        // get extended pointer on "extend" field of VFS context for DEVFS in cluster 0
1324        xptr_t  extend_xp = XPTR( 0 , &fs_context[FS_TYPE_DEVFS].extend );
1325
1326        // get pointer on DEVFS context in cluster 0
1327        devfs_ctx_t * devfs_ctx = hal_remote_lpt( extend_xp );
1328       
1329        devfs_dev_inode_xp      = hal_remote_l64( XPTR( 0 , &devfs_ctx->dev_inode_xp ) );
1330        devfs_external_inode_xp = hal_remote_l64( XPTR( 0 , &devfs_ctx->external_inode_xp ) );
1331
1332        // populate DEVFS in all clusters
1333        devfs_local_init( devfs_dev_inode_xp,
1334                          devfs_external_inode_xp,
1335                          &devfs_internal_inode_xp );
1336    }
1337
1338    /////////////////////////////////////////////////////////////////////////////////
1339    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1340                                        (info->x_size * info->y_size) );
1341    barrier_wait( &local_barrier , info->cores_nr );
1342    /////////////////////////////////////////////////////////////////////////////////
1343
1344#if DEBUG_KERNEL_INIT
1345if( (core_lid ==  0) & (local_cxy == 0) ) 
1346printk("\n[DBG] %s : exit barrier 7 : DEV initialized in cluster 0 / sr %x / cycle %d\n",
1347__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1348#endif
1349
1350    /////////////////////////////////////////////////////////////////////////////////
1351    // STEP 8 : CP0 in cluster 0 creates the first user process (process_init)
1352    /////////////////////////////////////////////////////////////////////////////////
1353
1354    if( (core_lid == 0) && (local_cxy == 0) ) 
1355    {
1356
1357#if( DEBUG_KERNEL_INIT & 1 )
1358vfs_display( vfs_root_inode_xp );
1359#endif
1360
1361       process_init_create();
1362    }
1363
1364    /////////////////////////////////////////////////////////////////////////////////
1365    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1366                                        (info->x_size * info->y_size) );
1367    barrier_wait( &local_barrier , info->cores_nr );
1368    /////////////////////////////////////////////////////////////////////////////////
1369
1370#if DEBUG_KERNEL_INIT
1371if( (core_lid ==  0) & (local_cxy == 0) ) 
1372printk("\n[DBG] %s : exit barrier 8 : process init created / sr %x / cycle %d\n", 
1373__FUNCTION__, (uint32_t)hal_get_sr(), (uint32_t)hal_get_cycles() );
1374#endif
1375
1376#if (DEBUG_KERNEL_INIT & 1)
1377if( (core_lid ==  0) & (local_cxy == 0) ) 
1378sched_display( 0 );
1379#endif
1380
1381    /////////////////////////////////////////////////////////////////////////////////
1382    // STEP 9 : CP0 in cluster 0 print banner
1383    /////////////////////////////////////////////////////////////////////////////////
1384   
1385    if( (core_lid == 0) && (local_cxy == 0) ) 
1386    {
1387        print_banner( (info->x_size * info->y_size) , info->cores_nr );
1388
1389#if( DEBUG_KERNEL_INIT & 1 )
1390printk("\n\n***** memory fooprint for main kernel objects\n\n"
1391                   " - thread descriptor  : %d bytes\n"
1392                   " - process descriptor : %d bytes\n"
1393                   " - cluster manager    : %d bytes\n"
1394                   " - chdev descriptor   : %d bytes\n"
1395                   " - core descriptor    : %d bytes\n"
1396                   " - scheduler          : %d bytes\n"
1397                   " - rpc fifo           : %d bytes\n"
1398                   " - page descriptor    : %d bytes\n"
1399                   " - mapper root        : %d bytes\n"
1400                   " - ppm manager        : %d bytes\n"
1401                   " - kcm manager        : %d bytes\n"
1402                   " - khm manager        : %d bytes\n"
1403                   " - vmm manager        : %d bytes\n"
1404                   " - gpt root           : %d bytes\n"
1405                   " - list item          : %d bytes\n"
1406                   " - xlist item         : %d bytes\n"
1407                   " - busylock           : %d bytes\n"
1408                   " - remote busylock    : %d bytes\n"
1409                   " - queuelock          : %d bytes\n"
1410                   " - remote queuelock   : %d bytes\n"
1411                   " - rwlock             : %d bytes\n"
1412                   " - remote rwlock      : %d bytes\n",
1413                   sizeof( thread_t           ),
1414                   sizeof( process_t          ),
1415                   sizeof( cluster_t          ),
1416                   sizeof( chdev_t            ),
1417                   sizeof( core_t             ),
1418                   sizeof( scheduler_t        ),
1419                   sizeof( remote_fifo_t      ),
1420                   sizeof( page_t             ),
1421                   sizeof( mapper_t           ),
1422                   sizeof( ppm_t              ),
1423                   sizeof( kcm_t              ),
1424                   sizeof( khm_t              ),
1425                   sizeof( vmm_t              ),
1426                   sizeof( gpt_t              ),
1427                   sizeof( list_entry_t       ),
1428                   sizeof( xlist_entry_t      ),
1429                   sizeof( busylock_t         ),
1430                   sizeof( remote_busylock_t  ),
1431                   sizeof( queuelock_t        ),
1432                   sizeof( remote_queuelock_t ),
1433                   sizeof( rwlock_t           ),
1434                   sizeof( remote_rwlock_t    ));
1435#endif
1436
1437    }
1438
1439    // each core activates its private TICK IRQ
1440    dev_pic_enable_timer( CONFIG_SCHED_TICK_MS_PERIOD );
1441
1442#if DEBUG_KERNEL_INIT
1443printk("\n[DBG] %s : thread %x on core[%x,%d] jumps to thread_idle_func() / cycle %d\n",
1444__FUNCTION__ , CURRENT_THREAD , local_cxy , core_lid , (uint32_t)hal_get_cycles() );
1445#endif
1446
1447    // each core jump to thread_idle_func
1448    thread_idle_func();
1449}
1450
Note: See TracBrowser for help on using the repository browser.