source: trunk/kernel/kern/kernel_init.c @ 619

Last change on this file since 619 was 619, checked in by alain, 5 years ago

1) Fix a bug in KSH : after the "load" command,

the [ksh] prompt is now printed after completion
of the loaded application.

2) Fix a bug in vmm_handle_cow() : the copy-on-write

use now a hal_remote_memcpy() to replicate the page content.


File size: 60.5 KB
Line 
1/*
2 * kernel_init.c - kernel parallel initialization
3 *
4 * Authors :  Mohamed Lamine Karaoui (2015)
5 *            Alain Greiner  (2016,2017,2018)
6 *
7 * Copyright (c) Sorbonne Universites
8 *
9 * This file is part of ALMOS-MKH.
10 *
11 * ALMOS-MKH is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; version 2.0 of the License.
14 *
15 * ALMOS-MKH is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18 * General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
22 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
23 */
24
25#include <kernel_config.h>
26#include <errno.h>
27#include <hal_kernel_types.h>
28#include <hal_special.h>
29#include <hal_context.h>
30#include <hal_irqmask.h>
31#include <hal_macros.h>
32#include <hal_ppm.h>
33#include <barrier.h>
34#include <xbarrier.h>
35#include <remote_fifo.h>
36#include <core.h>
37#include <list.h>
38#include <xlist.h>
39#include <xhtab.h>
40#include <thread.h>
41#include <scheduler.h>
42#include <kmem.h>
43#include <cluster.h>
44#include <string.h>
45#include <memcpy.h>
46#include <ppm.h>
47#include <page.h>
48#include <chdev.h>
49#include <boot_info.h>
50#include <dqdt.h>
51#include <dev_mmc.h>
52#include <dev_dma.h>
53#include <dev_iob.h>
54#include <dev_ioc.h>
55#include <dev_txt.h>
56#include <dev_pic.h>
57#include <printk.h>
58#include <vfs.h>
59#include <devfs.h>
60#include <mapper.h>
61
62///////////////////////////////////////////////////////////////////////////////////////////
63// All the following global variables are replicated in all clusters.
64// They are initialised by the kernel_init() function.
65//
66// WARNING : The section names have been defined to control the base addresses of the
67// boot_info structure and the idle thread descriptors, through the kernel.ld script:
68// - the boot_info structure is built by the bootloader, and used by kernel_init.
69//   it must be the first object in the kdata segment.
70// - the array of idle threads descriptors must be placed on the first page boundary after
71//   the boot_info structure in the kdata segment.
72///////////////////////////////////////////////////////////////////////////////////////////
73
74// This variable defines the local boot_info structure
75__attribute__((section(".kinfo")))
76boot_info_t          boot_info;
77
78// This variable defines the "idle" threads descriptors array
79__attribute__((section(".kidle")))
80char                 idle_threads[CONFIG_THREAD_DESC_SIZE *
81                                   CONFIG_MAX_LOCAL_CORES]   CONFIG_PPM_PAGE_ALIGNED;
82
83// This variable defines the local cluster manager
84__attribute__((section(".kdata")))
85cluster_t            cluster_manager                         CONFIG_CACHE_LINE_ALIGNED;
86
87// This variable defines the TXT_TX[0] chdev
88__attribute__((section(".kdata")))
89chdev_t              txt0_tx_chdev                           CONFIG_CACHE_LINE_ALIGNED;
90
91// This variable defines the TXT_RX[0] chdev
92__attribute__((section(".kdata")))
93chdev_t              txt0_rx_chdev                           CONFIG_CACHE_LINE_ALIGNED;
94
95// This variables define the kernel process0 descriptor
96__attribute__((section(".kdata")))
97process_t            process_zero                            CONFIG_CACHE_LINE_ALIGNED;
98
99// This variable defines extended pointers on the distributed chdevs
100__attribute__((section(".kdata")))
101chdev_directory_t    chdev_dir                               CONFIG_CACHE_LINE_ALIGNED;
102
103// This variable contains the input IRQ indexes for the IOPIC controller
104__attribute__((section(".kdata")))
105iopic_input_t        iopic_input                             CONFIG_CACHE_LINE_ALIGNED;
106
107// This variable contains the input IRQ indexes for the LAPIC controller
108__attribute__((section(".kdata")))
109lapic_input_t        lapic_input                             CONFIG_CACHE_LINE_ALIGNED;
110
111// This variable defines the local cluster identifier
112__attribute__((section(".kdata")))
113cxy_t                local_cxy                               CONFIG_CACHE_LINE_ALIGNED;
114
115// This variable is used for CP0 cores synchronisation in kernel_init()
116__attribute__((section(".kdata")))
117xbarrier_t           global_barrier                          CONFIG_CACHE_LINE_ALIGNED;
118
119// This variable is used for local cores synchronisation in kernel_init()
120__attribute__((section(".kdata")))
121barrier_t            local_barrier                           CONFIG_CACHE_LINE_ALIGNED;
122
123// This variable defines the array of supported File System contexts
124__attribute__((section(".kdata")))
125vfs_ctx_t            fs_context[FS_TYPES_NR]                 CONFIG_CACHE_LINE_ALIGNED;
126
127// kernel_init is the entry point defined in hal/tsar_mips32/kernel.ld
128// It is used by the bootloader.
129extern void kernel_init( boot_info_t * info );
130
131// This array is used for debug, and describes the kernel locks usage,
132// It must be kept consistent with the defines in kernel_config.h file.
133char * lock_type_str[] =
134{
135    "unused_0",              //  0
136
137    "CLUSTER_KCM",           //  1
138    "PPM_FREE",              //  2
139    "SCHED_STATE",           //  3
140    "VMM_STACK",             //  4
141    "VMM_MMAP",              //  5
142    "VFS_CTX",               //  6
143    "KCM_STATE",             //  7
144    "KHM_STATE",             //  8
145    "HTAB_STATE",            //  9
146
147    "THREAD_JOIN",           // 10
148    "XHTAB_STATE",           // 11
149    "CHDEV_QUEUE",           // 12
150    "CHDEV_TXT0",            // 13
151    "CHDEV_TXTLIST",         // 14
152    "PAGE_STATE",            // 15
153    "MUTEX_STATE",           // 16
154    "CONDVAR_STATE",         // 17
155    "SEM_STATE",             // 18
156    "PROCESS_CWD",           // 19
157    "BARRIER_STATE",         // 20
158
159    "CLUSTER_PREFTBL",       // 21
160
161    "PPM_DIRTY",             // 22
162    "CLUSTER_LOCALS",        // 23
163    "CLUSTER_COPIES",        // 24
164    "PROCESS_CHILDREN",      // 25
165    "PROCESS_USERSYNC",      // 26
166    "PROCESS_FDARRAY",       // 27
167    "FATFS_FREE",            // 28
168    "PROCESS_DIR",           // 29
169
170    "PROCESS_THTBL",         // 30
171
172    "MAPPER_STATE",          // 31
173    "VFS_SIZE",              // 32
174    "VFS_FILE",              // 33
175    "VMM_VSL",               // 34
176    "VMM_GPT",               // 35
177    "VFS_MAIN",              // 36
178};       
179
180// debug variables to analyse the sys_read() and sys_write() syscalls timing
181
182#if DEBUG_SYS_READ
183uint32_t   enter_sys_read;
184uint32_t   exit_sys_read;
185
186uint32_t   enter_devfs_read;
187uint32_t   exit_devfs_read;
188
189uint32_t   enter_txt_read;
190uint32_t   exit_txt_read;
191
192uint32_t   enter_chdev_cmd_read;
193uint32_t   exit_chdev_cmd_read;
194
195uint32_t   enter_chdev_server_read;
196uint32_t   exit_chdev_server_read;
197
198uint32_t   enter_tty_cmd_read;
199uint32_t   exit_tty_cmd_read;
200
201uint32_t   enter_tty_isr_read;
202uint32_t   exit_tty_isr_read;
203#endif
204
205// these debug variables are used to analyse the sys_write() syscall timing
206
207#if DEBUG_SYS_WRITE   
208uint32_t   enter_sys_write;
209uint32_t   exit_sys_write;
210
211uint32_t   enter_devfs_write;
212uint32_t   exit_devfs_write;
213
214uint32_t   enter_txt_write;
215uint32_t   exit_txt_write;
216
217uint32_t   enter_chdev_cmd_write;
218uint32_t   exit_chdev_cmd_write;
219
220uint32_t   enter_chdev_server_write;
221uint32_t   exit_chdev_server_write;
222
223uint32_t   enter_tty_cmd_write;
224uint32_t   exit_tty_cmd_write;
225
226uint32_t   enter_tty_isr_write;
227uint32_t   exit_tty_isr_write;
228#endif
229
230// intrumentation variables : cumulated costs per syscall type in cluster
231uint32_t   syscalls_cumul_cost[SYSCALLS_NR];
232
233// intrumentation variables : number of syscalls per syscal type in cluster
234uint32_t   syscalls_occurences[SYSCALLS_NR];
235
236///////////////////////////////////////////////////////////////////////////////////////////
237// This function displays the ALMOS_MKH banner.
238///////////////////////////////////////////////////////////////////////////////////////////
239static void print_banner( uint32_t nclusters , uint32_t ncores )
240{
241    printk("\n"
242           "                    _        __    __     _____     ______         __    __    _   __   _     _   \n"
243           "          /\\       | |      |  \\  /  |   / ___ \\   / _____|       |  \\  /  |  | | / /  | |   | |  \n"
244           "         /  \\      | |      |   \\/   |  | /   \\ | | /             |   \\/   |  | |/ /   | |   | |  \n"
245           "        / /\\ \\     | |      | |\\  /| |  | |   | | | |_____   ___  | |\\  /| |  |   /    | |___| |  \n"
246           "       / /__\\ \\    | |      | | \\/ | |  | |   | | \\_____  \\ |___| | | \\/ | |  |   \\    |  ___  |  \n"
247           "      / ______ \\   | |      | |    | |  | |   | |       | |       | |    | |  | |\\ \\   | |   | |  \n"
248           "     / /      \\ \\  | |____  | |    | |  | \\___/ |  _____/ |       | |    | |  | | \\ \\  | |   | |  \n"
249           "    /_/        \\_\\ |______| |_|    |_|   \\_____/  |______/        |_|    |_|  |_|  \\_\\ |_|   |_|  \n"
250           "\n\n\t\t Advanced Locality Management Operating System / Multi Kernel Hybrid\n"
251           "\n\n\t\t %s / %d cluster(s) / %d core(s) per cluster\n\n",
252           CONFIG_ALMOS_VERSION , nclusters , ncores );
253}
254
255
256///////////////////////////////////////////////////////////////////////////////////////////
257// This function initializes the TXT_TX[0] and TXT_RX[0] chdev descriptors, implementing
258// the "kernel terminal", shared by all kernel instances for debug messages.
259// These chdev are implemented as global variables (replicated in all clusters),
260// because this terminal is used before the kmem allocator initialisation, but only
261// the chdevs in cluster 0 are registered in the "chdev_dir" directory.
262// As this TXT0 chdev supports only the TXT_SYNC_WRITE command, we don't create
263// a server thread, we don't allocate a WTI, and we don't initialize the waiting queue.
264// Note: The TXT_RX[0] chdev is created, but is not used by ALMOS-MKH (september 2018).
265///////////////////////////////////////////////////////////////////////////////////////////
266// @ info    : pointer on the local boot-info structure.
267///////////////////////////////////////////////////////////////////////////////////////////
268static void __attribute__ ((noinline)) txt0_device_init( boot_info_t * info )
269{
270    boot_device_t * dev_tbl;         // pointer on array of devices in boot_info
271    uint32_t        dev_nr;          // actual number of devices in this cluster
272    xptr_t          base;            // remote pointer on segment base
273    uint32_t        func;            // device functional index
274    uint32_t        impl;            // device implementation index
275    uint32_t        i;               // device index in dev_tbl
276    uint32_t        x;               // X cluster coordinate
277    uint32_t        y;               // Y cluster coordinate
278    uint32_t        channels;        // number of channels
279
280    // get number of peripherals and base of devices array from boot_info
281    dev_nr      = info->ext_dev_nr;
282    dev_tbl     = info->ext_dev;
283
284    // loop on external peripherals to find TXT device
285    for( i = 0 ; i < dev_nr ; i++ )
286    {
287        base        = dev_tbl[i].base;
288        func        = FUNC_FROM_TYPE( dev_tbl[i].type );
289        impl        = IMPL_FROM_TYPE( dev_tbl[i].type );
290        channels    = dev_tbl[i].channels;
291
292        if (func == DEV_FUNC_TXT )
293        {
294            // initialize TXT_TX[0] chdev
295            txt0_tx_chdev.func    = func;
296            txt0_tx_chdev.impl    = impl;
297            txt0_tx_chdev.channel = 0;
298            txt0_tx_chdev.base    = base;
299            txt0_tx_chdev.is_rx   = false;
300            remote_busylock_init( XPTR( local_cxy , &txt0_tx_chdev.wait_lock ),
301                                  LOCK_CHDEV_TXT0 );
302           
303            // initialize TXT_RX[0] chdev
304            txt0_rx_chdev.func    = func;
305            txt0_rx_chdev.impl    = impl;
306            txt0_rx_chdev.channel = 0;
307            txt0_rx_chdev.base    = base;
308            txt0_rx_chdev.is_rx   = true;
309            remote_busylock_init( XPTR( local_cxy , &txt0_rx_chdev.wait_lock ),
310                                  LOCK_CHDEV_TXT0 );
311           
312            // make TXT specific initialisations
313            dev_txt_init( &txt0_tx_chdev );                 
314            dev_txt_init( &txt0_rx_chdev );
315
316            // register TXT_TX[0] & TXT_RX[0] in chdev_dir[x][y]
317            // for all valid clusters             
318            for( x = 0 ; x < info->x_size ; x++ )
319            {
320                for( y = 0 ; y < info->y_size ; y++ )
321                {
322                    cxy_t cxy = HAL_CXY_FROM_XY( x , y );
323
324                    if( cluster_is_active( cxy ) )
325                    {
326                        hal_remote_s64( XPTR( cxy , &chdev_dir.txt_tx[0] ) ,
327                                        XPTR( local_cxy , &txt0_tx_chdev ) );
328                        hal_remote_s64( XPTR( cxy , &chdev_dir.txt_rx[0] ) ,
329                                        XPTR( local_cxy , &txt0_rx_chdev ) );
330                    }
331                }
332            }
333
334            hal_fence();
335        }
336        } // end loop on devices
337}  // end txt0_device_init()
338
339///////////////////////////////////////////////////////////////////////////////////////////
340// This function allocates memory and initializes the chdev descriptors for the internal
341// peripherals contained in the local cluster, other than the LAPIC, as specified by
342// the boot_info, including the linking with the driver for the specified implementation.
343// The relevant entries in all copies of the devices directory are initialised.
344///////////////////////////////////////////////////////////////////////////////////////////
345// @ info    : pointer on the local boot-info structure.
346///////////////////////////////////////////////////////////////////////////////////////////
347static void __attribute__ ((noinline)) internal_devices_init( boot_info_t * info )
348{
349    boot_device_t * dev_tbl;         // pointer on array of internaldevices in boot_info
350        uint32_t        dev_nr;          // actual number of devices in this cluster
351        xptr_t          base;            // remote pointer on segment base
352    uint32_t        func;            // device functionnal index
353    uint32_t        impl;            // device implementation index
354        uint32_t        i;               // device index in dev_tbl
355        uint32_t        x;               // X cluster coordinate
356        uint32_t        y;               // Y cluster coordinate
357        uint32_t        channels;        // number of channels
358        uint32_t        channel;         // channel index
359        chdev_t       * chdev_ptr;       // local pointer on created chdev
360
361    // get number of internal peripherals and base from boot_info
362        dev_nr  = info->int_dev_nr;
363    dev_tbl = info->int_dev;
364
365    // loop on internal peripherals
366        for( i = 0 ; i < dev_nr ; i++ )
367        {
368        base        = dev_tbl[i].base;
369        channels    = dev_tbl[i].channels;
370        func        = FUNC_FROM_TYPE( dev_tbl[i].type );
371        impl        = IMPL_FROM_TYPE( dev_tbl[i].type );
372 
373        //////////////////////////
374        if( func == DEV_FUNC_MMC ) 
375        {
376
377            // check channels
378            if( channels != 1 )
379            {
380                printk("\n[PANIC] in %s : MMC device must be single channel\n",
381                __FUNCTION__ );
382                hal_core_sleep();
383            }
384
385            // create chdev in local cluster
386            chdev_ptr = chdev_create( func,
387                                      impl,
388                                      0,          // channel
389                                      false,      // direction
390                                      base );
391
392            // check memory
393            if( chdev_ptr == NULL )
394            {
395                printk("\n[PANIC] in %s : cannot create MMC chdev\n",
396                __FUNCTION__ );
397                hal_core_sleep();
398            }
399           
400            // make MMC specific initialisation
401            dev_mmc_init( chdev_ptr );
402
403            // set the MMC field in all chdev_dir[x][y] structures
404            for( x = 0 ; x < info->x_size ; x++ )
405            {
406                for( y = 0 ; y < info->y_size ; y++ )
407                {
408                    cxy_t cxy = HAL_CXY_FROM_XY( x , y );
409
410                    if( cluster_is_active( cxy ) )
411                    {
412                        hal_remote_s64( XPTR( cxy , &chdev_dir.mmc[local_cxy] ), 
413                                        XPTR( local_cxy , chdev_ptr ) );
414                    }
415                }
416            }
417
418#if( DEBUG_KERNEL_INIT & 0x1 )
419if( hal_time_stamp() > DEBUG_KERNEL_INIT )
420printk("\n[%s] : created MMC in cluster %x / chdev = %x\n",
421__FUNCTION__ , local_cxy , chdev_ptr );
422#endif
423        }
424        ///////////////////////////////
425        else if( func == DEV_FUNC_DMA )
426        {
427            // create one chdev per channel in local cluster
428            for( channel = 0 ; channel < channels ; channel++ )
429            {   
430                // create chdev[channel] in local cluster
431                chdev_ptr = chdev_create( func,
432                                          impl,
433                                          channel,
434                                          false,     // direction
435                                          base );
436
437                // check memory
438                if( chdev_ptr == NULL )
439                {
440                    printk("\n[PANIC] in %s : cannot create DMA chdev\n",
441                    __FUNCTION__ );
442                    hal_core_sleep();
443                }
444           
445                // make DMA specific initialisation
446                dev_dma_init( chdev_ptr );     
447
448                // initialize only the DMA[channel] field in the local chdev_dir[x][y]
449                // structure because the DMA device is not remotely accessible.
450                chdev_dir.dma[channel] = XPTR( local_cxy , chdev_ptr );
451
452#if( DEBUG_KERNEL_INIT & 0x1 )
453if( hal_time_stamp() > DEBUG_KERNEL_INIT )
454printk("\n[%s] : created DMA[%d] in cluster %x / chdev = %x\n",
455__FUNCTION__ , channel , local_cxy , chdev_ptr );
456#endif
457            }
458        }
459    }
460}  // end internal_devices_init()
461
462///////////////////////////////////////////////////////////////////////////////////////////
463// This function allocates memory and initializes the chdev descriptors for the 
464// external (shared) peripherals other than the IOPIC, as specified by the boot_info.
465// This includes the dynamic linking with the driver for the specified implementation.
466// These chdev descriptors are distributed on all clusters, using a modulo on a global
467// index, identically computed in all clusters.
468// This function is executed in all clusters by the CP0 core, that computes a global index
469// for all external chdevs. Each CP0 core creates only the chdevs that must be placed in
470// the local cluster, because the global index matches the local index.
471// The relevant entries in all copies of the devices directory are initialised.
472///////////////////////////////////////////////////////////////////////////////////////////
473// @ info    : pointer on the local boot-info structure.
474///////////////////////////////////////////////////////////////////////////////////////////
475static void external_devices_init( boot_info_t * info )
476{
477    boot_device_t * dev_tbl;         // pointer on array of external devices in boot_info
478        uint32_t        dev_nr;          // actual number of external devices
479        xptr_t          base;            // remote pointer on segment base
480    uint32_t        func;            // device functionnal index
481    uint32_t        impl;            // device implementation index
482        uint32_t        i;               // device index in dev_tbl
483        uint32_t        x;               // X cluster coordinate
484        uint32_t        y;               // Y cluster coordinate
485        uint32_t        channels;        // number of channels
486        uint32_t        channel;         // channel index
487        uint32_t        directions;      // number of directions (1 or 2)
488        uint32_t        rx;              // direction index (0 or 1)
489    chdev_t       * chdev;           // local pointer on one channel_device descriptor
490    uint32_t        ext_chdev_gid;   // global index of external chdev
491
492    // get number of peripherals and base of devices array from boot_info
493    dev_nr      = info->ext_dev_nr;
494    dev_tbl     = info->ext_dev;
495
496    // initializes global index (PIC is already placed in cluster 0
497    ext_chdev_gid = 1;
498
499    // loop on external peripherals
500    for( i = 0 ; i < dev_nr ; i++ )
501    {
502        base     = dev_tbl[i].base;
503        channels = dev_tbl[i].channels;
504        func     = FUNC_FROM_TYPE( dev_tbl[i].type );
505        impl     = IMPL_FROM_TYPE( dev_tbl[i].type );
506
507        // There is one chdev per direction for NIC and for TXT
508        if((func == DEV_FUNC_NIC) || (func == DEV_FUNC_TXT)) directions = 2;
509        else                                                 directions = 1;
510
511        // do nothing for ROM, that does not require a device descriptor.
512        if( func == DEV_FUNC_ROM ) continue;
513
514        // do nothing for PIC, that is already initialized
515        if( func == DEV_FUNC_PIC ) continue;
516
517        // check PIC device initialized
518        if( chdev_dir.pic == XPTR_NULL )
519        {
520            printk("\n[PANIC] in %s : PIC device must be initialized first\n",
521            __FUNCTION__ );
522            hal_core_sleep();
523        }
524
525        // check external device functionnal type
526        if( (func != DEV_FUNC_IOB) && (func != DEV_FUNC_IOC) && (func != DEV_FUNC_TXT) &&
527            (func != DEV_FUNC_NIC) && (func != DEV_FUNC_FBF) )
528        {
529            printk("\n[PANIC] in %s : undefined peripheral type\n",
530            __FUNCTION__ );
531            hal_core_sleep();
532        }
533
534        // loops on channels
535        for( channel = 0 ; channel < channels ; channel++ )
536        {
537            // loop on directions
538            for( rx = 0 ; rx < directions ; rx++ )
539            {
540                // skip TXT0 that has already been initialized
541                if( (func == DEV_FUNC_TXT) && (channel == 0) ) continue;
542
543                // all kernel instances compute the target cluster for all chdevs,
544                // computing the global index ext_chdev_gid[func,channel,direction]
545                cxy_t target_cxy;
546                while( 1 )
547                {
548                    uint32_t offset     = ext_chdev_gid % ( info->x_size * info->y_size );
549                    uint32_t x          = offset / info->y_size;
550                    uint32_t y          = offset % info->y_size;
551
552                    target_cxy = HAL_CXY_FROM_XY( x , y );
553
554                    // exit loop if target cluster is active
555                    if( cluster_is_active( target_cxy ) ) break;
556               
557                    // increment global index otherwise
558                    ext_chdev_gid++;
559                }
560
561                // allocate and initialize a local chdev
562                // when local cluster matches target cluster
563                if( target_cxy == local_cxy )
564                {
565                    chdev = chdev_create( func,
566                                          impl,
567                                          channel,
568                                          rx,          // direction
569                                          base );
570
571                    if( chdev == NULL )
572                    {
573                        printk("\n[PANIC] in %s : cannot allocate chdev\n",
574                        __FUNCTION__ );
575                        hal_core_sleep();
576                    }
577
578                    // make device type specific initialisation
579                    if     ( func == DEV_FUNC_IOB ) dev_iob_init( chdev );
580                    else if( func == DEV_FUNC_IOC ) dev_ioc_init( chdev );
581                    else if( func == DEV_FUNC_TXT ) dev_txt_init( chdev );
582                    else if( func == DEV_FUNC_NIC ) dev_nic_init( chdev );
583                    else if( func == DEV_FUNC_FBF ) dev_fbf_init( chdev );
584
585                    // all external (shared) devices are remotely accessible
586                    // initialize the replicated chdev_dir[x][y] structures
587                    // defining the extended pointers on chdev descriptors
588                    xptr_t * entry;
589
590                    if(func==DEV_FUNC_IOB             ) entry  = &chdev_dir.iob;
591                    if(func==DEV_FUNC_IOC             ) entry  = &chdev_dir.ioc[channel];
592                    if(func==DEV_FUNC_FBF             ) entry  = &chdev_dir.fbf[channel];
593                    if((func==DEV_FUNC_TXT) && (rx==0)) entry  = &chdev_dir.txt_tx[channel];
594                    if((func==DEV_FUNC_TXT) && (rx==1)) entry  = &chdev_dir.txt_rx[channel];
595                    if((func==DEV_FUNC_NIC) && (rx==0)) entry  = &chdev_dir.nic_tx[channel];
596                    if((func==DEV_FUNC_NIC) && (rx==1)) entry  = &chdev_dir.nic_rx[channel];
597
598                    for( x = 0 ; x < info->x_size ; x++ )
599                    {
600                        for( y = 0 ; y < info->y_size ; y++ )
601                        {
602                            cxy_t cxy = HAL_CXY_FROM_XY( x , y );
603
604                            if( cluster_is_active( cxy ) )
605                            {
606                                hal_remote_s64( XPTR( cxy , entry ),
607                                                XPTR( local_cxy , chdev ) );
608                            }
609                        }
610                    }
611
612#if( DEBUG_KERNEL_INIT & 0x1 )
613if( hal_time_stamp() > DEBUG_KERNEL_INIT )
614printk("\n[%s] : create chdev %s / channel = %d / rx = %d / cluster %x / chdev = %x\n",
615__FUNCTION__ , chdev_func_str( func ), channel , rx , local_cxy , chdev );
616#endif
617                }  // end if match
618
619                // increment chdev global index (matching or not)
620                ext_chdev_gid++;
621
622            } // end loop on directions
623        }  // end loop on channels
624        } // end loop on devices
625}  // end external_devices_init()
626
627///////////////////////////////////////////////////////////////////////////////////////////
628// This function is called by CP0 in cluster 0 to allocate memory and initialize the PIC
629// device, namely the informations attached to the external IOPIC controller, that
630// must be replicated in all clusters (struct iopic_input).
631// This initialisation must be done before other devices initialisation because the IRQ
632// routing infrastructure is required for both internal and external devices init.
633///////////////////////////////////////////////////////////////////////////////////////////
634// @ info    : pointer on the local boot-info structure.
635///////////////////////////////////////////////////////////////////////////////////////////
636static void __attribute__ ((noinline)) iopic_init( boot_info_t * info )
637{
638    boot_device_t * dev_tbl;         // pointer on boot_info external devices array
639        uint32_t        dev_nr;          // actual number of external devices
640        xptr_t          base;            // remote pointer on segment base
641    uint32_t        func;            // device functionnal index
642    uint32_t        impl;            // device implementation index
643        uint32_t        i;               // device index in dev_tbl
644    uint32_t        x;               // cluster X coordinate
645    uint32_t        y;               // cluster Y coordinate
646    bool_t          found;           // IOPIC found
647        chdev_t       * chdev;           // pointer on PIC chdev descriptor
648
649    // get number of external peripherals and base of array from boot_info
650        dev_nr      = info->ext_dev_nr;
651    dev_tbl     = info->ext_dev;
652
653    // avoid GCC warning
654    base        = XPTR_NULL;
655    impl        = 0;
656
657    // loop on external peripherals to get the IOPIC 
658        for( i = 0 , found = false ; i < dev_nr ; i++ )
659        {
660        func = FUNC_FROM_TYPE( dev_tbl[i].type );
661
662        if( func == DEV_FUNC_PIC )
663        {
664            base     = dev_tbl[i].base;
665            impl     = IMPL_FROM_TYPE( dev_tbl[i].type );
666            found    = true;
667            break;
668        }
669    }
670
671    // check PIC existence
672    if( found == false )
673    {
674        printk("\n[PANIC] in %s : PIC device not found\n",
675        __FUNCTION__ );
676        hal_core_sleep();
677    }
678
679    // allocate and initialize the PIC chdev in cluster 0
680    chdev = chdev_create( DEV_FUNC_PIC,
681                          impl,
682                          0,      // channel
683                          0,      // direction,
684                          base );
685
686    // check memory
687    if( chdev == NULL )
688    {
689        printk("\n[PANIC] in %s : no memory for PIC chdev\n",
690        __FUNCTION__ );
691        hal_core_sleep();
692    }
693
694    // make PIC device type specific initialisation
695    dev_pic_init( chdev );
696
697    // register, in all clusters, the extended pointer
698    // on PIC chdev in "chdev_dir" array
699    xptr_t * entry = &chdev_dir.pic;   
700               
701    for( x = 0 ; x < info->x_size ; x++ )
702    {
703        for( y = 0 ; y < info->y_size ; y++ )
704        {
705            cxy_t cxy = HAL_CXY_FROM_XY( x , y );
706
707            if( cluster_is_active( cxy ) )
708            {
709                hal_remote_s64( XPTR( cxy , entry ) , 
710                                XPTR( local_cxy , chdev ) );
711            }
712        }
713    }
714
715    // initialize, in all clusters, the "iopic_input" structure
716    // defining how external IRQs are connected to IOPIC
717
718    // register default value for unused inputs
719    for( x = 0 ; x < info->x_size ; x++ )
720    {
721        for( y = 0 ; y < info->y_size ; y++ )
722        {
723            cxy_t cxy = HAL_CXY_FROM_XY( x , y );
724
725            if( cluster_is_active( cxy ) )
726            {
727                hal_remote_memset( XPTR( cxy , &iopic_input ), 
728                                   0xFF , sizeof(iopic_input_t) );
729            }
730        }
731    }
732
733    // register input IRQ index for valid inputs
734    uint32_t   id;             // input IRQ index
735    uint8_t    valid;          // input IRQ is connected
736    uint32_t   type;           // source device type
737    uint8_t    channel;        // source device channel
738    uint8_t    is_rx;          // source device direction
739    uint32_t * ptr = NULL;     // local pointer on one field in iopic_input stucture
740
741    for( id = 0 ; id < CONFIG_MAX_EXTERNAL_IRQS ; id++ )
742    {
743        valid   = dev_tbl[i].irq[id].valid;
744        type    = dev_tbl[i].irq[id].dev_type;
745        channel = dev_tbl[i].irq[id].channel;
746        is_rx   = dev_tbl[i].irq[id].is_rx;
747        func    = FUNC_FROM_TYPE( type );
748
749        // get pointer on relevant field in iopic_input
750        if( valid )
751        {
752            if     ( func == DEV_FUNC_IOC )                 ptr = &iopic_input.ioc[channel]; 
753            else if((func == DEV_FUNC_TXT) && (is_rx == 0)) ptr = &iopic_input.txt_tx[channel];
754            else if((func == DEV_FUNC_TXT) && (is_rx != 0)) ptr = &iopic_input.txt_rx[channel];
755            else if((func == DEV_FUNC_NIC) && (is_rx == 0)) ptr = &iopic_input.nic_tx[channel];
756            else if((func == DEV_FUNC_NIC) && (is_rx != 0)) ptr = &iopic_input.nic_rx[channel];
757            else if( func == DEV_FUNC_IOB )                 ptr = &iopic_input.iob;
758            else
759            {
760                printk("\n[PANIC] in %s : illegal source device for IOPIC input\n",
761                __FUNCTION__ );
762                hal_core_sleep();
763            }
764
765            // set one entry in all "iopic_input" structures
766            for( x = 0 ; x < info->x_size ; x++ )
767            {
768                for( y = 0 ; y < info->y_size ; y++ )
769                {
770                    cxy_t cxy = HAL_CXY_FROM_XY( x , y );
771
772                    if( cluster_is_active( cxy ) )
773                    {
774                        hal_remote_s64( XPTR( cxy , ptr ) , id ); 
775                    }
776                }
777            }
778        }
779    } 
780
781#if( DEBUG_KERNEL_INIT & 0x1 )
782if( hal_time_stamp() > DEBUG_KERNEL_INIT )
783{
784    printk("\n[%s] created PIC chdev in cluster %x at cycle %d\n",
785    __FUNCTION__ , local_cxy , (uint32_t)hal_time_stamp() );
786    dev_pic_inputs_display();
787}
788#endif
789   
790}  // end iopic_init()
791
792///////////////////////////////////////////////////////////////////////////////////////////
793// This function is called by all CP0s in all cluster to complete the PIC device
794// initialisation, namely the informations attached to the LAPIC controller.
795// This initialisation must be done after the IOPIC initialisation, but before other
796// devices initialisation because the IRQ routing infrastructure is required for both
797// internal and external devices initialisation.
798///////////////////////////////////////////////////////////////////////////////////////////
799// @ info    : pointer on the local boot-info structure.
800///////////////////////////////////////////////////////////////////////////////////////////
801static void __attribute__ ((noinline)) lapic_init( boot_info_t * info )
802{
803    boot_device_t * dev_tbl;      // pointer on boot_info internal devices array
804    uint32_t        dev_nr;       // number of internal devices
805    uint32_t        i;            // device index in dev_tbl
806        xptr_t          base;         // remote pointer on segment base
807    uint32_t        func;         // device functionnal type in boot_info
808    bool_t          found;        // LAPIC found
809
810    // get number of internal peripherals and base
811        dev_nr      = info->int_dev_nr;
812    dev_tbl     = info->int_dev;
813
814    // loop on internal peripherals to get the lapic device
815        for( i = 0 , found = false ; i < dev_nr ; i++ )
816        {
817        func = FUNC_FROM_TYPE( dev_tbl[i].type );
818
819        if( func == DEV_FUNC_ICU )
820        {
821            base     = dev_tbl[i].base;
822            found    = true;
823            break;
824        }
825    }
826
827    // if the LAPIC controller is not defined in the boot_info,
828    // we simply don't initialize the PIC extensions in the kernel,
829    // making the assumption that the LAPIC related informations
830    // are hidden in the hardware specific PIC driver.
831    if( found )
832    {
833        // initialise the PIC extensions for
834        // the core descriptor and core manager extensions
835        dev_pic_extend_init( (uint32_t *)GET_PTR( base ) );
836
837        // initialize the "lapic_input" structure
838        // defining how internal IRQs are connected to LAPIC
839        uint32_t        id;
840        uint8_t         valid;
841        uint8_t         channel;
842        uint32_t        func;
843
844        for( id = 0 ; id < CONFIG_MAX_INTERNAL_IRQS ; id++ )
845        {
846            valid    = dev_tbl[i].irq[id].valid;
847            func     = FUNC_FROM_TYPE( dev_tbl[i].irq[id].dev_type );
848            channel  = dev_tbl[i].irq[id].channel;
849
850            if( valid ) // only valid local IRQs are registered
851            {
852                if     ( func == DEV_FUNC_MMC ) lapic_input.mmc = id;
853                else if( func == DEV_FUNC_DMA ) lapic_input.dma[channel] = id;
854                else
855                {
856                    printk("\n[PANIC] in %s : illegal source device for LAPIC input\n",
857                    __FUNCTION__ );
858                    hal_core_sleep();
859                }
860            }
861        }
862    }
863}  // end lapic_init()
864
865///////////////////////////////////////////////////////////////////////////////////////////
866// This static function returns the identifiers of the calling core.
867///////////////////////////////////////////////////////////////////////////////////////////
868// @ info    : pointer on boot_info structure.
869// @ lid     : [out] core local index in cluster.
870// @ cxy     : [out] cluster identifier.
871// @ lid     : [out] core global identifier (hardware).
872// @ return 0 if success / return EINVAL if not found.
873///////////////////////////////////////////////////////////////////////////////////////////
874static error_t __attribute__ ((noinline)) get_core_identifiers( boot_info_t * info,
875                                                                lid_t       * lid,
876                                                                cxy_t       * cxy,
877                                                                gid_t       * gid )
878{
879    uint32_t   i;
880    gid_t      global_id;
881
882    // get global identifier from hardware register
883    global_id = hal_get_gid();
884
885    // makes an associative search in boot_info to get (cxy,lid) from global_id
886    for( i = 0 ; i < info->cores_nr ; i++ )
887    {
888        if( global_id == info->core[i].gid )
889        {
890            *lid = info->core[i].lid;
891            *cxy = info->core[i].cxy;
892            *gid = global_id;
893            return 0;
894        }
895    }
896    return EINVAL;
897}
898
899///////////////////////////////////////////////////////////////////////////////////////////
900// This function is the entry point for the kernel initialisation.
901// It is executed by all cores in all clusters, but only core[0], called CP0,
902// initializes the shared resources such as the cluster manager, or the local peripherals.
903// To comply with the multi-kernels paradigm, it accesses only local cluster memory, using
904// only information contained in the local boot_info_t structure, set by the bootloader.
905// Only CP0 in cluster 0 print the log messages.
906///////////////////////////////////////////////////////////////////////////////////////////
907// @ info    : pointer on the local boot-info structure.
908///////////////////////////////////////////////////////////////////////////////////////////
909void kernel_init( boot_info_t * info )
910{
911    lid_t        core_lid = -1;             // running core local index
912    cxy_t        core_cxy = -1;             // running core cluster identifier
913    gid_t        core_gid;                  // running core hardware identifier
914    cluster_t  * cluster;                   // pointer on local cluster manager
915    core_t     * core;                      // pointer on running core descriptor
916    thread_t   * thread;                    // pointer on idle thread descriptor
917
918    xptr_t       vfs_root_inode_xp;         // extended pointer on VFS root inode
919    xptr_t       devfs_dev_inode_xp;        // extended pointer on DEVFS dev inode   
920    xptr_t       devfs_external_inode_xp;   // extended pointer on DEVFS external inode       
921    xptr_t       devfs_internal_inode_xp;   // extended pointer on DEVFS internal inode       
922
923    error_t      error;
924    reg_t        status;                    // running core status register
925
926    /////////////////////////////////////////////////////////////////////////////////
927    // STEP 0 : Each core get its core identifier from boot_info, and makes
928    //          a partial initialisation of its private idle thread descriptor.
929    //          CP0 initializes the "local_cxy" global variable.
930    //          CP0 in cluster IO initializes the TXT0 chdev to print log messages.
931    /////////////////////////////////////////////////////////////////////////////////
932
933    error = get_core_identifiers( info,
934                                  &core_lid,
935                                  &core_cxy,
936                                  &core_gid );
937
938    // all CP0s initialize cluster identifier
939    if( core_lid == 0 ) local_cxy = info->cxy;
940
941    // each core gets a pointer on its private idle thread descriptor
942    thread = (thread_t *)( idle_threads + (core_lid * CONFIG_THREAD_DESC_SIZE) );
943
944    // each core registers this thread pointer in hardware register
945    hal_set_current_thread( thread );
946
947    // each core register core descriptor pointer in idle thread descriptor
948    thread->core = &LOCAL_CLUSTER->core_tbl[core_lid];
949
950    // each core initializes the idle thread locks counters
951    thread->busylocks = 0;
952
953#if DEBUG_BUSYLOCK
954    // each core initialise the idle thread list of busylocks
955    xlist_root_init( XPTR( local_cxy , &thread->busylocks_root ) );
956#endif
957
958    // all CP0s initialize cluster info
959    if( core_lid == 0 ) cluster_info_init( info );
960
961    // CP0 in cluster 0 initialises TXT0 chdev descriptor
962    if( (core_lid == 0) && (core_cxy == 0) ) txt0_device_init( info );
963
964    /////////////////////////////////////////////////////////////////////////////////
965    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
966                                        (info->x_size * info->y_size) );
967    barrier_wait( &local_barrier , info->cores_nr );
968    /////////////////////////////////////////////////////////////////////////////////
969
970#if DEBUG_KERNEL_INIT
971if( (core_lid ==  0) & (local_cxy == 0) ) 
972printk("\n[%s] : exit barrier 0 : TXT0 initialized / cycle %d\n",
973__FUNCTION__, (uint32_t)hal_get_cycles() );
974#endif
975
976    /////////////////////////////////////////////////////////////////////////////
977    // STEP 1 : all cores check core identifier.
978    //          CP0 initializes the local cluster manager.
979    //          This includes the memory allocators.
980    /////////////////////////////////////////////////////////////////////////////
981
982    // all cores check identifiers
983    if( error )
984    {
985        printk("\n[PANIC] in %s : illegal core : gid %x / cxy %x / lid %d",
986        __FUNCTION__, core_lid, core_cxy, core_lid );
987        hal_core_sleep();
988    }
989
990    // all CP0s initialise DQDT (only CPO in cluster 0 build the quad-tree)
991    if( core_lid == 0 ) dqdt_init();
992   
993    // all CP0s initialize other cluster manager complex structures
994    if( core_lid == 0 )
995    {
996        error = cluster_manager_init( info );
997
998        if( error )
999        {
1000             printk("\n[PANIC] in %s : cannot initialize cluster manager in cluster %x\n",
1001             __FUNCTION__, local_cxy );
1002             hal_core_sleep();
1003        }
1004    }
1005
1006    /////////////////////////////////////////////////////////////////////////////////
1007    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1008                                        (info->x_size * info->y_size) );
1009    barrier_wait( &local_barrier , info->cores_nr );
1010    /////////////////////////////////////////////////////////////////////////////////
1011
1012#if DEBUG_KERNEL_INIT
1013if( (core_lid ==  0) & (local_cxy == 0) ) 
1014printk("\n[%s] : exit barrier 1 : clusters initialised / cycle %d\n",
1015__FUNCTION__, (uint32_t)hal_get_cycles() );
1016#endif
1017
1018    /////////////////////////////////////////////////////////////////////////////////
1019    // STEP 2 : CP0 initializes the process_zero descriptor.
1020    //          CP0 in cluster 0 initializes the IOPIC device.
1021    /////////////////////////////////////////////////////////////////////////////////
1022
1023    // all cores get pointer on local cluster manager & core descriptor
1024    cluster = &cluster_manager;
1025    core    = &cluster->core_tbl[core_lid];
1026
1027    // all CP0s initialize the process_zero descriptor
1028    if( core_lid == 0 ) process_zero_create( &process_zero );
1029
1030    // CP0 in cluster 0 initializes the PIC chdev,
1031    if( (core_lid == 0) && (local_cxy == 0) ) iopic_init( info );
1032   
1033    ////////////////////////////////////////////////////////////////////////////////
1034    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1035                                        (info->x_size * info->y_size) );
1036    barrier_wait( &local_barrier , info->cores_nr );
1037    ////////////////////////////////////////////////////////////////////////////////
1038
1039#if DEBUG_KERNEL_INIT
1040if( (core_lid ==  0) & (local_cxy == 0) ) 
1041printk("\n[%s] : exit barrier 2 : PIC initialised / cycle %d\n",
1042__FUNCTION__, (uint32_t)hal_get_cycles() );
1043#endif
1044
1045    ////////////////////////////////////////////////////////////////////////////////
1046    // STEP 3 : CP0 initializes the distibuted LAPIC descriptor.
1047    //          CP0 initializes the internal chdev descriptors
1048    //          CP0 initialize the local external chdev descriptors
1049    ////////////////////////////////////////////////////////////////////////////////
1050
1051    // all CP0s initialize their local LAPIC extension,
1052    if( core_lid == 0 ) lapic_init( info );
1053
1054    // CP0 scan the internal (private) peripherals,
1055    // and allocates memory for the corresponding chdev descriptors.
1056    if( core_lid == 0 ) internal_devices_init( info );
1057       
1058
1059    // All CP0s contribute to initialise external peripheral chdev descriptors.
1060    // Each CP0[cxy] scan the set of external (shared) peripherals (but the TXT0),
1061    // and allocates memory for the chdev descriptors that must be placed
1062    // on the (cxy) cluster according to the global index value.
1063
1064    if( core_lid == 0 ) external_devices_init( info );
1065
1066    /////////////////////////////////////////////////////////////////////////////////
1067    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1068                                        (info->x_size * info->y_size) );
1069    barrier_wait( &local_barrier , info->cores_nr );
1070    /////////////////////////////////////////////////////////////////////////////////
1071
1072#if DEBUG_KERNEL_INIT
1073if( (core_lid ==  0) & (local_cxy == 0) ) 
1074printk("\n[%s] : exit barrier 3 : all chdevs initialised / cycle %d\n",
1075__FUNCTION__, (uint32_t)hal_get_cycles() );
1076#endif
1077
1078#if( DEBUG_KERNEL_INIT & 1 )
1079if( (core_lid ==  0) & (local_cxy == 0) ) 
1080chdev_dir_display();
1081#endif
1082   
1083    /////////////////////////////////////////////////////////////////////////////////
1084    // STEP 4 : All cores enable IPI (Inter Procesor Interrupt),
1085    //          Alh cores initialize IDLE thread.
1086    //          Only CP0 in cluster 0 creates the VFS root inode.
1087    //          It access the boot device to initialize the file system context.
1088    /////////////////////////////////////////////////////////////////////////////////
1089
1090    // All cores enable IPI
1091    dev_pic_enable_ipi();
1092    hal_enable_irq( &status );
1093
1094    // all cores initialize the idle thread descriptor
1095    thread_idle_init( thread,
1096                      THREAD_IDLE,
1097                      &thread_idle_func,
1098                      NULL,
1099                      core_lid );
1100
1101    // all cores unblock idle thread, and register it in scheduler
1102    thread_unblock( XPTR( local_cxy , thread ) , THREAD_BLOCKED_GLOBAL );
1103    core->scheduler.idle = thread;
1104
1105#if( DEBUG_KERNEL_INIT & 1 )
1106sched_display( core_lid );
1107#endif
1108
1109    // CPO in cluster 0 creates the VFS root
1110    if( (core_lid ==  0) && (local_cxy == 0 ) ) 
1111    {
1112        vfs_root_inode_xp = XPTR_NULL;
1113
1114        // Only FATFS is supported yet,
1115        // other File System can be introduced here
1116        if( CONFIG_VFS_ROOT_IS_FATFS )
1117        {
1118            // 1. allocate memory for FATFS context extension in cluster 0
1119            fatfs_ctx_t * fatfs_ctx = fatfs_ctx_alloc();
1120
1121            if( fatfs_ctx == NULL )
1122            {
1123                printk("\n[PANIC] in %s : cannot create FATFS context in cluster 0\n",
1124                __FUNCTION__ );
1125                hal_core_sleep();
1126            }
1127
1128            // 2. access boot device to initialize FATFS context
1129            fatfs_ctx_init( fatfs_ctx );
1130 
1131            // 3. get various informations from FATFS context
1132            uint32_t root_dir_cluster = fatfs_ctx->root_dir_cluster;
1133            uint32_t cluster_size     = fatfs_ctx->bytes_per_sector * 
1134                                        fatfs_ctx->sectors_per_cluster;
1135            uint32_t total_clusters   = fatfs_ctx->fat_sectors_count << 7;
1136 
1137            // 4. create VFS root inode in cluster 0
1138            error = vfs_inode_create( FS_TYPE_FATFS,                       // fs_type
1139                                      INODE_TYPE_DIR,                      // inode_type
1140                                      0,                                   // attr
1141                                      0,                                   // rights
1142                                      0,                                   // uid
1143                                      0,                                   // gid
1144                                      &vfs_root_inode_xp );                // return
1145            if( error )
1146            {
1147                printk("\n[PANIC] in %s : cannot create VFS root inode in cluster 0\n",
1148                __FUNCTION__ );
1149                hal_core_sleep();
1150            }
1151
1152            // 5. update FATFS root inode extension 
1153            cxy_t         vfs_root_cxy = GET_CXY( vfs_root_inode_xp );
1154            vfs_inode_t * vfs_root_ptr = GET_PTR( vfs_root_inode_xp );
1155            hal_remote_spt( XPTR( vfs_root_cxy , &vfs_root_ptr->extend ), 
1156                            (void*)(intptr_t)root_dir_cluster );
1157
1158            // 6. initialize the generic VFS context for FATFS
1159            vfs_ctx_init( FS_TYPE_FATFS,                               // fs type
1160                          0,                                           // attributes: unused
1161                              total_clusters,                              // number of clusters
1162                              cluster_size,                                // bytes
1163                              vfs_root_inode_xp,                           // VFS root
1164                          fatfs_ctx );                                 // extend
1165        }
1166        else
1167        {
1168            printk("\n[PANIC] in %s : unsupported VFS type in cluster 0\n",
1169            __FUNCTION__ );
1170            hal_core_sleep();
1171        }
1172
1173        // create the <.> and <..> dentries in VFS root directory
1174        // the VFS root parent inode is the VFS root inode itself
1175        vfs_add_special_dentries( vfs_root_inode_xp,
1176                                  vfs_root_inode_xp );
1177
1178        // register VFS root inode in process_zero descriptor of cluster 0
1179        process_zero.vfs_root_xp = vfs_root_inode_xp;
1180        process_zero.cwd_xp      = vfs_root_inode_xp;
1181    }
1182
1183    /////////////////////////////////////////////////////////////////////////////////
1184    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1185                                        (info->x_size * info->y_size) );
1186    barrier_wait( &local_barrier , info->cores_nr );
1187    /////////////////////////////////////////////////////////////////////////////////
1188
1189#if DEBUG_KERNEL_INIT
1190if( (core_lid ==  0) & (local_cxy == 0) ) 
1191printk("\n[%s] : exit barrier 4 : VFS root (%x,%x) in cluster 0 / cycle %d\n",
1192__FUNCTION__, GET_CXY(process_zero.vfs_root_xp),
1193GET_PTR(process_zero.vfs_root_xp), (uint32_t)hal_get_cycles() );
1194#endif
1195
1196    /////////////////////////////////////////////////////////////////////////////////
1197    // STEP 5 : Other CP0s allocate memory for the selected FS context,
1198    //          and initialise both the local FS context and the local VFS context
1199    //          from values stored in cluster 0.
1200    //          They get the VFS root inode extended pointer from cluster 0.
1201    /////////////////////////////////////////////////////////////////////////////////
1202
1203    if( (core_lid ==  0) && (local_cxy != 0) ) 
1204    {
1205        // File System must be FATFS in this implementation,
1206        // but other File System can be introduced here
1207        if( CONFIG_VFS_ROOT_IS_FATFS )
1208        {
1209            // 1. allocate memory for local FATFS context
1210            fatfs_ctx_t * local_fatfs_ctx = fatfs_ctx_alloc();
1211
1212            // check memory
1213            if( local_fatfs_ctx == NULL )
1214            {
1215                printk("\n[PANIC] in %s : cannot create FATFS context in cluster %x\n",
1216                __FUNCTION__ , local_cxy );
1217                hal_core_sleep();
1218            }
1219
1220            // 2. get local pointer on VFS context for FATFS
1221            vfs_ctx_t   * vfs_ctx = &fs_context[FS_TYPE_FATFS];
1222
1223            // 3. get local pointer on FATFS context in cluster 0
1224            fatfs_ctx_t * remote_fatfs_ctx = hal_remote_lpt( XPTR( 0 , &vfs_ctx->extend ) );
1225
1226            // 4. copy FATFS context from cluster 0 to local cluster
1227            hal_remote_memcpy( XPTR( local_cxy , local_fatfs_ctx ), 
1228                               XPTR( 0 ,         remote_fatfs_ctx ), sizeof(fatfs_ctx_t) );
1229
1230            // 5. copy VFS context from cluster 0 to local cluster
1231            hal_remote_memcpy( XPTR( local_cxy , vfs_ctx ), 
1232                               XPTR( 0 ,         vfs_ctx ), sizeof(vfs_ctx_t) );
1233
1234            // 6. update extend field in local copy of VFS context
1235            vfs_ctx->extend = local_fatfs_ctx;
1236
1237            if( ((fatfs_ctx_t *)vfs_ctx->extend)->sectors_per_cluster != 8 )
1238            {
1239                printk("\n[PANIC] in %s : illegal FATFS context in cluster %x\n",
1240                __FUNCTION__ , local_cxy );
1241                hal_core_sleep();
1242            }
1243        }
1244
1245        // get extended pointer on VFS root inode from cluster 0
1246        vfs_root_inode_xp = hal_remote_l64( XPTR( 0 , &process_zero.vfs_root_xp ) );
1247
1248        // update local process_zero descriptor
1249        process_zero.vfs_root_xp = vfs_root_inode_xp;
1250        process_zero.cwd_xp      = vfs_root_inode_xp;
1251    }
1252
1253    /////////////////////////////////////////////////////////////////////////////////
1254    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1255                                        (info->x_size * info->y_size) );
1256    barrier_wait( &local_barrier , info->cores_nr );
1257    /////////////////////////////////////////////////////////////////////////////////
1258
1259#if DEBUG_KERNEL_INIT
1260if( (core_lid ==  0) & (local_cxy == 1) ) 
1261printk("\n[%s] : exit barrier 5 : VFS root (%x,%x) in cluster 1 / cycle %d\n",
1262__FUNCTION__, GET_CXY(process_zero.vfs_root_xp),
1263GET_PTR(process_zero.vfs_root_xp), (uint32_t)hal_get_cycles() );
1264#endif
1265
1266    /////////////////////////////////////////////////////////////////////////////////
1267    // STEP 6 : CP0 in cluster 0 makes the global DEVFS tree initialisation:
1268    //          It initializes the DEVFS context, and creates the DEVFS
1269    //          "dev" and "external" inodes in cluster 0.
1270    /////////////////////////////////////////////////////////////////////////////////
1271
1272    if( (core_lid ==  0) && (local_cxy == 0) ) 
1273    {
1274        // 1. allocate memory for DEVFS context extension in cluster 0
1275        devfs_ctx_t * devfs_ctx = devfs_ctx_alloc();
1276
1277        if( devfs_ctx == NULL )
1278        {
1279            printk("\n[PANIC] in %s : cannot create DEVFS context in cluster 0\n",
1280            __FUNCTION__ , local_cxy );
1281            hal_core_sleep();
1282        }
1283
1284        // 2. initialize the DEVFS entry in the vfs_context[] array
1285        vfs_ctx_init( FS_TYPE_DEVFS,                                // fs type
1286                      0,                                            // attributes: unused
1287                          0,                                            // total_clusters: unused
1288                          0,                                            // cluster_size: unused
1289                          vfs_root_inode_xp,                            // VFS root
1290                      devfs_ctx );                                  // extend
1291
1292        // 3. create "dev" and "external" inodes (directories)
1293        devfs_global_init( process_zero.vfs_root_xp,
1294                           &devfs_dev_inode_xp,
1295                           &devfs_external_inode_xp );
1296
1297        // 4. initializes DEVFS context extension
1298        devfs_ctx_init( devfs_ctx,
1299                        devfs_dev_inode_xp,
1300                        devfs_external_inode_xp );
1301    }   
1302
1303    /////////////////////////////////////////////////////////////////////////////////
1304    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1305                                        (info->x_size * info->y_size) );
1306    barrier_wait( &local_barrier , info->cores_nr );
1307    /////////////////////////////////////////////////////////////////////////////////
1308
1309#if DEBUG_KERNEL_INIT
1310if( (core_lid ==  0) & (local_cxy == 0) ) 
1311printk("\n[%s] : exit barrier 6 : DEVFS root initialized in cluster 0 / cycle %d\n",
1312__FUNCTION__, (uint32_t)hal_get_cycles() );
1313#endif
1314
1315    /////////////////////////////////////////////////////////////////////////////////
1316    // STEP 7 : All CP0s complete in parallel the DEVFS tree initialization.
1317    //          Each CP0 get the "dev" and "external" extended pointers from
1318    //          values stored in cluster 0.
1319    //          Then each CP0 in cluster(i) creates the DEVFS "internal" directory,
1320    //          and creates the pseudo-files for all chdevs in cluster (i).
1321    /////////////////////////////////////////////////////////////////////////////////
1322
1323    if( core_lid == 0 )
1324    {
1325        // get extended pointer on "extend" field of VFS context for DEVFS in cluster 0
1326        xptr_t  extend_xp = XPTR( 0 , &fs_context[FS_TYPE_DEVFS].extend );
1327
1328        // get pointer on DEVFS context in cluster 0
1329        devfs_ctx_t * devfs_ctx = hal_remote_lpt( extend_xp );
1330       
1331        devfs_dev_inode_xp      = hal_remote_l64( XPTR( 0 , &devfs_ctx->dev_inode_xp ) );
1332        devfs_external_inode_xp = hal_remote_l64( XPTR( 0 , &devfs_ctx->external_inode_xp ) );
1333
1334        // populate DEVFS in all clusters
1335        devfs_local_init( devfs_dev_inode_xp,
1336                          devfs_external_inode_xp,
1337                          &devfs_internal_inode_xp );
1338    }
1339
1340    /////////////////////////////////////////////////////////////////////////////////
1341    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ), 
1342                                        (info->x_size * info->y_size) );
1343    barrier_wait( &local_barrier , info->cores_nr );
1344    /////////////////////////////////////////////////////////////////////////////////
1345
1346#if DEBUG_KERNEL_INIT
1347if( (core_lid ==  0) & (local_cxy == 0) ) 
1348printk("\n[%s] : exit barrier 7 : DEV initialized in cluster 0 / cycle %d\n",
1349__FUNCTION__, (uint32_t)hal_get_cycles() );
1350#endif
1351
1352    /////////////////////////////////////////////////////////////////////////////////
1353    // STEP 8 : CP0 in cluster 0 creates the first user process (process_init)
1354    /////////////////////////////////////////////////////////////////////////////////
1355
1356    if( (core_lid == 0) && (local_cxy == 0) ) 
1357    {
1358
1359#if( DEBUG_KERNEL_INIT & 1 )
1360vfs_display( vfs_root_inode_xp );
1361#endif
1362
1363       process_init_create();
1364    }
1365
1366    /////////////////////////////////////////////////////////////////////////////////
1367    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1368                                        (info->x_size * info->y_size) );
1369    barrier_wait( &local_barrier , info->cores_nr );
1370    /////////////////////////////////////////////////////////////////////////////////
1371
1372#if DEBUG_KERNEL_INIT
1373if( (core_lid ==  0) & (local_cxy == 0) ) 
1374printk("\n[%s] : exit barrier 8 : process init created / cycle %d\n", 
1375__FUNCTION__, (uint32_t)hal_get_cycles() );
1376#endif
1377
1378#if (DEBUG_KERNEL_INIT & 1)
1379if( (core_lid ==  0) & (local_cxy == 0) ) 
1380sched_display( 0 );
1381#endif
1382
1383    /////////////////////////////////////////////////////////////////////////////////
1384    // STEP 9 : CP0 in cluster 0 print banner
1385    /////////////////////////////////////////////////////////////////////////////////
1386   
1387    if( (core_lid == 0) && (local_cxy == 0) ) 
1388    {
1389        print_banner( (info->x_size * info->y_size) , info->cores_nr );
1390
1391#if( DEBUG_KERNEL_INIT & 1 )
1392printk("\n\n***** memory fooprint for main kernel objects\n\n"
1393                   " - thread descriptor  : %d bytes\n"
1394                   " - process descriptor : %d bytes\n"
1395                   " - cluster manager    : %d bytes\n"
1396                   " - chdev descriptor   : %d bytes\n"
1397                   " - core descriptor    : %d bytes\n"
1398                   " - scheduler          : %d bytes\n"
1399                   " - rpc fifo           : %d bytes\n"
1400                   " - page descriptor    : %d bytes\n"
1401                   " - mapper root        : %d bytes\n"
1402                   " - ppm manager        : %d bytes\n"
1403                   " - kcm manager        : %d bytes\n"
1404                   " - khm manager        : %d bytes\n"
1405                   " - vmm manager        : %d bytes\n"
1406                   " - gpt root           : %d bytes\n"
1407                   " - list item          : %d bytes\n"
1408                   " - xlist item         : %d bytes\n"
1409                   " - busylock           : %d bytes\n"
1410                   " - remote busylock    : %d bytes\n"
1411                   " - queuelock          : %d bytes\n"
1412                   " - remote queuelock   : %d bytes\n"
1413                   " - rwlock             : %d bytes\n"
1414                   " - remote rwlock      : %d bytes\n",
1415                   sizeof( thread_t           ),
1416                   sizeof( process_t          ),
1417                   sizeof( cluster_t          ),
1418                   sizeof( chdev_t            ),
1419                   sizeof( core_t             ),
1420                   sizeof( scheduler_t        ),
1421                   sizeof( remote_fifo_t      ),
1422                   sizeof( page_t             ),
1423                   sizeof( mapper_t           ),
1424                   sizeof( ppm_t              ),
1425                   sizeof( kcm_t              ),
1426                   sizeof( khm_t              ),
1427                   sizeof( vmm_t              ),
1428                   sizeof( gpt_t              ),
1429                   sizeof( list_entry_t       ),
1430                   sizeof( xlist_entry_t      ),
1431                   sizeof( busylock_t         ),
1432                   sizeof( remote_busylock_t  ),
1433                   sizeof( queuelock_t        ),
1434                   sizeof( remote_queuelock_t ),
1435                   sizeof( rwlock_t           ),
1436                   sizeof( remote_rwlock_t    ));
1437#endif
1438
1439    }
1440
1441    // each core activates its private TICK IRQ
1442    dev_pic_enable_timer( CONFIG_SCHED_TICK_MS_PERIOD );
1443
1444    /////////////////////////////////////////////////////////////////////////////////
1445    if( core_lid == 0 ) xbarrier_wait( XPTR( 0 , &global_barrier ),
1446                                        (info->x_size * info->y_size) );
1447    barrier_wait( &local_barrier , info->cores_nr );
1448    /////////////////////////////////////////////////////////////////////////////////
1449
1450#if DEBUG_KERNEL_INIT
1451thread_t * this = CURRENT_THREAD;
1452printk("\n[%s] : thread[%x,%x] on core[%x,%d] jumps to thread_idle_func() / cycle %d\n",
1453__FUNCTION__ , this->process->pid, this->trdid,
1454local_cxy, core_lid, (uint32_t)hal_get_cycles() );
1455#endif
1456
1457    // each core jump to thread_idle_func
1458    thread_idle_func();
1459
1460}  // end kernel_init()
1461
Note: See TracBrowser for help on using the repository browser.