source: trunk/kernel/kern/scheduler.c @ 561

Last change on this file since 561 was 551, checked in by nicolas.van.phan@…, 6 years ago

Make locks before IDLE Init busy

File size: 18.0 KB
Line 
1/*
2 * scheduler.c - Core scheduler implementation.
3 *
4 * Author    Alain Greiner (2016)
5 *
6 * Copyright (c)  UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH. is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH. is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH.; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#include <kernel_config.h>
25#include <hal_kernel_types.h>
26#include <hal_switch.h>
27#include <hal_irqmask.h>
28#include <hal_context.h>
29#include <printk.h>
30#include <list.h>
31#include <core.h>
32#include <thread.h>
33#include <chdev.h>
34#include <scheduler.h>
35
36
37///////////////////////////////////////////////////////////////////////////////////////////
38// Extern global variables
39///////////////////////////////////////////////////////////////////////////////////////////
40
41uint32_t   idle_thread_count;
42uint32_t   idle_thread_count_active;
43
44extern chdev_directory_t    chdev_dir;          // allocated in kernel_init.c file
45extern uint32_t             switch_save_sr[];   // allocated in kernel_init.c file
46
47////////////////////////////////
48void sched_init( core_t * core )
49{
50    scheduler_t * sched = &core->scheduler;
51
52    sched->u_threads_nr   = 0;
53    sched->k_threads_nr   = 0;
54
55    sched->current        = CURRENT_THREAD;
56    sched->idle           = NULL;               // initialized in kernel_init()
57    sched->u_last         = NULL;               // initialized in sched_register_thread()
58    sched->k_last         = NULL;               // initialized in sched_register_thread()
59
60    // initialise threads lists
61    list_root_init( &sched->u_root );
62    list_root_init( &sched->k_root );
63
64    // init spinlock
65    spinlock_init( &sched->lock );
66
67    sched->req_ack_pending = false;             // no pending request
68    sched->trace           = false;             // context switches trace desactivated
69
70}  // end sched_init()
71
72////////////////////////////////////////////
73void sched_register_thread( core_t   * core,
74                            thread_t * thread )
75{
76    scheduler_t * sched = &core->scheduler;
77    thread_type_t type  = thread->type;
78
79    // take lock protecting sheduler lists
80    uint32_t       irq_state;
81    spinlock_lock_busy( &sched->lock, &irq_state );
82
83    if( type == THREAD_USER )
84    {
85        list_add_last( &sched->u_root , &thread->sched_list );
86        sched->u_threads_nr++;
87        if( sched->u_last == NULL ) sched->u_last = &thread->sched_list;
88    }
89    else // kernel thread
90    {
91        list_add_last( &sched->k_root , &thread->sched_list );
92        sched->k_threads_nr++;
93        if( sched->k_last == NULL ) sched->k_last = &thread->sched_list; 
94    }
95
96    // release lock
97    hal_fence();
98    spinlock_unlock_busy( &sched->lock, irq_state);
99
100}  // end sched_register_thread()
101
102//////////////////////////////////////////////
103thread_t * sched_select( scheduler_t * sched )
104{
105    thread_t     * thread;
106    list_entry_t * current;
107    list_entry_t * last;
108    list_entry_t * root;
109    bool_t         done;
110    uint32_t       count;
111
112    // take lock protecting sheduler lists
113    spinlock_lock( &sched->lock );
114
115    // first : scan the kernel threads list if not empty
116    if( list_is_empty( &sched->k_root ) == false )
117    {
118        root    = &sched->k_root;
119        last    = sched->k_last;
120        done    = false;
121        count   = 0;
122        current = last;
123
124        while( done == false )
125        {
126            assert( (count < sched->k_threads_nr), "bad kernel threads list" );
127
128            // get next entry in kernel list
129            current = current->next;
130
131            // check exit condition
132            if( current == last ) done = true;
133
134            // skip the root that does not contain a thread
135            if( current == root ) continue;
136            else                  count++;
137
138            // get thread pointer for this entry
139            thread = LIST_ELEMENT( current , thread_t , sched_list );
140
141            // select kernel thread if non blocked and non THREAD_IDLE
142            if( (thread->blocked == 0)  && (thread->type != THREAD_IDLE) )
143            {
144                spinlock_unlock( &sched->lock );
145                return thread;
146            }
147        } // end loop on kernel threads
148    } // end kernel threads
149
150    // second : scan the user threads list if not empty
151    if( list_is_empty( &sched->u_root ) == false )
152    {
153        root    = &sched->u_root;
154        last    = sched->u_last;
155        done    = false;
156        count   = 0;
157        current = last;
158
159        while( done == false )
160        {
161            assert( (count < sched->u_threads_nr), "bad user threads list" );
162
163            // get next entry in user list
164            current = current->next;
165
166            // check exit condition
167            if( current == last ) done = true;
168
169            // skip the root that does not contain a thread
170            if( current == root ) continue;
171            else                  count++;
172
173            // get thread pointer for this entry
174            thread = LIST_ELEMENT( current , thread_t , sched_list );
175
176            // select thread if non blocked
177            if( thread->blocked == 0 )
178            {
179                spinlock_unlock( &sched->lock );
180                return thread;
181            }
182        } // end loop on user threads
183    } // end user threads
184
185    // third : return idle thread if no other runnable thread
186    spinlock_unlock( &sched->lock );
187    return sched->idle;
188
189}  // end sched_select()
190
191///////////////////////////////////////////
192void sched_handle_signals( core_t * core )
193{
194
195    list_entry_t * iter;
196    list_entry_t * root;
197    thread_t     * thread;
198    process_t    * process;
199    bool_t         last_thread;
200
201    // get pointer on scheduler
202    scheduler_t  * sched = &core->scheduler;
203
204    // get pointer on user threads root
205    root = &sched->u_root;
206
207    // take lock protecting threads lists
208    spinlock_lock( &sched->lock );
209
210    // We use a while to scan the user threads, to control the iterator increment,
211    // because some threads will be destroyed, and we cannot use a LIST_FOREACH()
212
213    // initialise list iterator
214    iter = root->next;
215
216    // scan all user threads
217    while( iter != root )
218    {
219        // get pointer on thread
220        thread = LIST_ELEMENT( iter , thread_t , sched_list );
221
222        // increment iterator
223        iter = iter->next;
224
225        // handle REQ_ACK
226        if( thread->flags & THREAD_FLAG_REQ_ACK )
227        {
228            // check thread blocked
229            assert( (thread->blocked & THREAD_BLOCKED_GLOBAL) , 
230            "thread not blocked" );
231 
232            // decrement response counter
233            hal_atomic_add( thread->ack_rsp_count , -1 );
234
235            // reset REQ_ACK in thread descriptor
236            thread_reset_req_ack( thread );
237        }
238
239        // handle REQ_DELETE
240        if( thread->flags & THREAD_FLAG_REQ_DELETE )
241        {
242            // get thread process descriptor
243            process = thread->process;
244
245                // release FPU if required
246                if( thread->core->fpu_owner == thread )  thread->core->fpu_owner = NULL;
247
248            // remove thread from scheduler (scheduler lock already taken)
249            uint32_t threads_nr = sched->u_threads_nr;
250
251            assert( (threads_nr != 0) , "u_threads_nr cannot be 0\n" );
252
253            sched->u_threads_nr = threads_nr - 1;
254            list_unlink( &thread->sched_list );
255            if( sched->u_last == &thread->sched_list )
256            {
257                if( threads_nr == 1 ) 
258                {
259                    sched->u_last = NULL;
260                }
261                else if( sched->u_root.next == &thread->sched_list )
262                {
263                    sched->u_last = sched->u_root.pred;
264                }
265                else
266                {
267                    sched->u_last = sched->u_root.next;
268                }
269            }
270
271            // delete thread descriptor
272            last_thread = thread_destroy( thread );
273
274#if DEBUG_SCHED_HANDLE_SIGNALS
275uint32_t cycle = (uint32_t)hal_get_cycles();
276if( DEBUG_SCHED_HANDLE_SIGNALS < cycle )
277printk("\n[DBG] %s : thread %x in process %x on core[%x,%d] deleted / cycle %d\n",
278__FUNCTION__ , thread->trdid , process->pid , local_cxy , thread->core->lid , cycle );
279#endif
280            // destroy process descriptor if no more threads
281            if( last_thread ) 
282            {
283                // delete process   
284                process_destroy( process );
285
286#if DEBUG_SCHED_HANDLE_SIGNALS
287cycle = (uint32_t)hal_get_cycles();
288if( DEBUG_SCHED_HANDLE_SIGNALS < cycle )
289printk("\n[DBG] %s : process %x in cluster %x deleted / cycle %d\n",
290__FUNCTION__ , process->pid , local_cxy , cycle );
291#endif
292            }
293        }
294    }
295
296    // release lock
297    hal_fence();
298    spinlock_unlock( &sched->lock );
299
300} // end sched_handle_signals()
301
302////////////////////////////////
303void sched_yield( const char * cause )
304{
305    thread_t    * next;
306    thread_t    * current = CURRENT_THREAD;
307    core_t      * core    = current->core;
308    scheduler_t * sched   = &core->scheduler;
309 
310#if (DEBUG_SCHED_YIELD & 0x1)
311if( sched->trace )
312sched_display( core->lid );
313#endif
314
315    // delay the yield if current thread has locks
316    if( (current->local_locks != 0) || (current->remote_locks != 0) )
317    {
318        current->flags |= THREAD_FLAG_SCHED;
319        return;
320    }
321
322    // enter critical section / save SR in current thread descriptor
323    hal_disable_irq( &CURRENT_THREAD->save_sr );
324
325    // loop on threads to select next thread
326    next = sched_select( sched );
327
328    // check next thread kernel_stack overflow
329    assert( (next->signature == THREAD_SIGNATURE),
330    "kernel stack overflow for thread %x on core[%x,%d] \n", next, local_cxy, core->lid );
331
332    // check next thread attached to same core as the calling thread
333    assert( (next->core == current->core),
334    "next core %x != current core %x\n", next->core, current->core );
335
336    // check next thread not blocked when type != IDLE
337    assert( ((next->blocked == 0) || (next->type == THREAD_IDLE)) ,
338    "next thread %x (%s) is blocked on core[%x,%d]\n", 
339    next->trdid , thread_type_str(next->type) , local_cxy , core->lid );
340
341    // switch contexts and update scheduler state if next != current
342        if( next != current )
343    {
344
345#if DEBUG_SCHED_YIELD
346if( sched->trace )
347printk("\n[DBG] %s : core[%x,%d] / cause = %s\n"
348"      thread %x (%s) (%x,%x) => thread %x (%s) (%x,%x) / cycle %d\n",
349__FUNCTION__, local_cxy, core->lid, cause, 
350current, thread_type_str(current->type), current->process->pid, current->trdid,next ,
351thread_type_str(next->type) , next->process->pid , next->trdid , (uint32_t)hal_get_cycles() );
352#endif
353
354        // update scheduler
355        sched->current = next;
356        if( next->type == THREAD_USER ) sched->u_last = &next->sched_list;
357        else                            sched->k_last = &next->sched_list;
358
359        // handle FPU ownership
360            if( next->type == THREAD_USER )
361        {
362                if( next == current->core->fpu_owner )  hal_fpu_enable();
363                else                                    hal_fpu_disable();
364        }
365
366        // switch CPU from current thread context to new thread context
367        hal_do_cpu_switch( current->cpu_context, next->cpu_context );
368    }
369    else
370    {
371
372#if DEBUG_SCHED_YIELD
373if( sched->trace )
374printk("\n[DBG] %s : core[%x,%d] / cause = %s\n"
375"      thread %x (%s) (%x,%x) continue / cycle %d\n",
376__FUNCTION__, local_cxy, core->lid, cause, current, thread_type_str(current->type),
377current->process->pid, current->trdid, (uint32_t)hal_get_cycles() );
378#endif
379
380    }
381
382    // handle pending requests for all threads executing on this core.
383    sched_handle_signals( core );
384
385    // exit critical section / restore SR from current thread descriptor
386    hal_restore_irq( CURRENT_THREAD->save_sr );
387
388}  // end sched_yield()
389
390
391///////////////////////////////
392void sched_display( lid_t lid )
393{
394    list_entry_t * iter;
395    thread_t     * thread;
396    uint32_t       save_sr;
397
398    assert( (lid < LOCAL_CLUSTER->cores_nr), "illegal core index %d\n", lid);
399
400    core_t       * core    = &LOCAL_CLUSTER->core_tbl[lid];
401    scheduler_t  * sched   = &core->scheduler;
402   
403    // get pointers on TXT0 chdev
404    xptr_t    txt0_xp  = chdev_dir.txt_tx[0];
405    cxy_t     txt0_cxy = GET_CXY( txt0_xp );
406    chdev_t * txt0_ptr = GET_PTR( txt0_xp );
407
408    // get extended pointer on remote TXT0 chdev lock
409    xptr_t  lock_xp = XPTR( txt0_cxy , &txt0_ptr->wait_lock );
410
411    // get TXT0 lock in busy waiting mode
412    remote_spinlock_lock_busy( lock_xp , &save_sr );
413
414    nolock_printk("\n***** threads on core[%x,%d] / current %x / cycle %d\n",
415    local_cxy , core->lid, sched->current, (uint32_t)hal_get_cycles() );
416
417    // display kernel threads
418    LIST_FOREACH( &sched->k_root , iter )
419    {
420        thread = LIST_ELEMENT( iter , thread_t , sched_list );
421        if (thread->type == THREAD_DEV) 
422        {
423            nolock_printk(" - %s / pid %X / trdid %X / desc %X / block %X / flags %X / %s\n",
424            thread_type_str( thread->type ), thread->process->pid, thread->trdid,
425            thread, thread->blocked, thread->flags, thread->chdev->name );
426        }
427        else
428        {
429            nolock_printk(" - %s / pid %X / trdid %X / desc %X / block %X / flags %X\n",
430            thread_type_str( thread->type ), thread->process->pid, thread->trdid,
431            thread, thread->blocked, thread->flags );
432        }
433    }
434
435    // display user threads
436    LIST_FOREACH( &sched->u_root , iter )
437    {
438        thread = LIST_ELEMENT( iter , thread_t , sched_list );
439        nolock_printk(" - %s / pid %X / trdid %X / desc %X / block %X / flags %X\n",
440        thread_type_str( thread->type ), thread->process->pid, thread->trdid,
441        thread, thread->blocked, thread->flags );
442    }
443
444    // release TXT0 lock
445    remote_spinlock_unlock_busy( lock_xp , save_sr );
446
447}  // end sched_display()
448
449/////////////////////////////////////
450void sched_remote_display( cxy_t cxy,
451                           lid_t lid )
452{
453    thread_t     * thread;
454    uint32_t       save_sr;
455
456    // check cxy
457    bool_t undefined = cluster_is_undefined( cxy );
458    assert( (undefined == false), "illegal cluster %x\n", cxy );
459
460    // check lid
461    uint32_t cores = hal_remote_lw( XPTR( cxy , &LOCAL_CLUSTER->cores_nr ) );
462    assert( (lid < cores), "illegal core index %d\n", lid);
463
464    // get local pointer on target scheduler
465    core_t      * core  = &LOCAL_CLUSTER->core_tbl[lid];
466    scheduler_t * sched = &core->scheduler;
467
468    // get local pointer on current thread in target scheduler
469    thread_t * current = hal_remote_lpt( XPTR( cxy, &sched->current ) );
470
471    // get local pointer on the first kernel and user threads list_entry
472    list_entry_t * k_entry = hal_remote_lpt( XPTR( cxy , &sched->k_root.next ) );
473    list_entry_t * u_entry = hal_remote_lpt( XPTR( cxy , &sched->u_root.next ) );
474   
475    // get pointers on TXT0 chdev
476    xptr_t    txt0_xp  = chdev_dir.txt_tx[0];
477    cxy_t     txt0_cxy = GET_CXY( txt0_xp );
478    chdev_t * txt0_ptr = GET_PTR( txt0_xp );
479
480    // get extended pointer on remote TXT0 chdev lock
481    xptr_t  lock_xp = XPTR( txt0_cxy , &txt0_ptr->wait_lock );
482
483    // get TXT0 lock in busy waiting mode
484    remote_spinlock_lock_busy( lock_xp , &save_sr );
485
486    // display header
487    nolock_printk("\n***** threads on core[%x,%d] / current %x / cycle %d\n",
488    cxy , lid, current, (uint32_t)hal_get_cycles() );
489
490    // display kernel threads
491    while( k_entry != &sched->k_root )
492    {
493        // get local pointer on kernel_thread
494        thread = LIST_ELEMENT( k_entry , thread_t , sched_list );
495
496        // get relevant thead info
497        thread_type_t type    = hal_remote_lw ( XPTR( cxy , &thread->type ) );
498        trdid_t       trdid   = hal_remote_lw ( XPTR( cxy , &thread->trdid ) );
499        uint32_t      blocked = hal_remote_lw ( XPTR( cxy , &thread->blocked ) );
500        uint32_t      flags   = hal_remote_lw ( XPTR( cxy , &thread->flags ) );
501        process_t *   process = hal_remote_lpt( XPTR( cxy , &thread->process ) );
502        pid_t         pid     = hal_remote_lw ( XPTR( cxy , &process->pid ) );
503
504        // display thread info
505        if (type == THREAD_DEV) 
506        {
507            char      name[16];
508            chdev_t * chdev = hal_remote_lpt( XPTR( cxy , &thread->chdev ) );
509            hal_remote_strcpy( XPTR( local_cxy , name ), XPTR( cxy , &chdev->name ) );
510
511            nolock_printk(" - %s / pid %X / trdid %X / desc %X / block %X / flags %X / %s\n",
512            thread_type_str( type ), pid, trdid, thread, blocked, flags, name );
513        }
514        else
515        {
516            nolock_printk(" - %s / pid %X / trdid %X / desc %X / block %X / flags %X\n",
517            thread_type_str( type ), pid, trdid, thread, blocked, flags );
518        }
519
520        // get next remote kernel thread list_entry
521        k_entry = hal_remote_lpt( XPTR( cxy , &k_entry->next ) );
522    }
523
524    // display user threads
525    while( u_entry != &sched->u_root )
526    {
527        // get local pointer on user_thread
528        thread = LIST_ELEMENT( u_entry , thread_t , sched_list );
529
530        // get relevant thead info
531        thread_type_t type    = hal_remote_lw ( XPTR( cxy , &thread->type ) );
532        trdid_t       trdid   = hal_remote_lw ( XPTR( cxy , &thread->trdid ) );
533        uint32_t      blocked = hal_remote_lw ( XPTR( cxy , &thread->blocked ) );
534        uint32_t      flags   = hal_remote_lw ( XPTR( cxy , &thread->flags ) );
535        process_t *   process = hal_remote_lpt( XPTR( cxy , &thread->process ) );
536        pid_t         pid     = hal_remote_lw ( XPTR( cxy , &process->pid ) );
537
538        nolock_printk(" - %s / pid %X / trdid %X / desc %X / block %X / flags %X\n",
539        thread_type_str( type ), pid, trdid, thread, blocked, flags );
540
541        // get next user thread list_entry
542        u_entry = hal_remote_lpt( XPTR( cxy , &u_entry->next ) );
543    }
544
545    // release TXT0 lock
546    remote_spinlock_unlock_busy( lock_xp , save_sr );
547
548}  // end sched_remote_display()
549
Note: See TracBrowser for help on using the repository browser.