source: trunk/kernel/syscalls/syscalls.h @ 508

Last change on this file since 508 was 506, checked in by viala@…, 6 years ago

[syscalls] add interface in implementation.

Add const where possible, fix protoypes to follow interface.

File size: 38.0 KB
RevLine 
[1]1/*
[407]2 * syscalls.h - Kernel side services for syscall handling.
[1]3 *
[457]4 * Author     Alain Greiner (2016,2017,2018)
[1]5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
[16]24#ifndef _SYSCALLS_H_
25#define _SYSCALLS_H_
[1]26
[457]27#include <hal_kernel_types.h>
[407]28#include <shared_syscalls.h>
[23]29
[407]30/**   Forward declarations  *****/
[23]31
32struct thread_s;                  // defined in thread.h
33struct pthread_attr_s;            // defined in thread.h
34struct vfs_stat_s;                // defined in vfs.h
35struct vfs_dirent_s;              // defined in vfs.h
36struct mmap_attr_s;               // defined in vmm.h
37
[506]38// debug:
39const char * syscall_str( uint32_t index );
40
[407]41/******************************************************************************************
42 * [0] This function terminates the execution of the calling user thread,
[23]43 * and makes the exit_value pointer available to any successful pthread_join() with the
44 * terminating thread.
[409]45 * It actually set the THREAD_SIG_EXIT signal, set the THREAD_BLOCKED_GLOBAL bit in the
46 * thread descriptor and deschedule.
47 * The thread will be detached from its process, and the memory allocated to the thread
48 * descriptor will be released later by the scheduler.
[407]49 ******************************************************************************************
[409]50 * @ exit_vallue  : pointer to be returned to joining thread if thread is attached.
51 * @ return 0 if success / return -1 if all locks not released or illegal argument.
[407]52 *****************************************************************************************/
[23]53int sys_thread_exit( void * exit_value );
[16]54
[407]55/******************************************************************************************
56 * [1] This function calls the scheduler for the core running the calling thread.
57 ******************************************************************************************
58 * @ x_size   : [out] number of clusters in a row.
59 * @ y_size   : [out] number of clusters in a column.
60 * @ ncores   : [out] number of cores per cluster.
61 * @ return always 0.
62 *****************************************************************************************/
[479]63int sys_thread_yield( void );
[16]64
[407]65/******************************************************************************************
[23]66 * [2] This function creates a new user thread. The <user_attr> argument is a pointer
67 * on astructure containing the thread attributes, defined in thread.h file.
[407]68 ******************************************************************************************
[23]69 * @ new_thread  : [out] local pointer on created thread descriptor.
70 * @ user_attr   : [in]  pointer on thread attributes structure.
71 * @ start_func  : [in]  pointer on start function.
72 * @ start_args  : [in]  pointer on start function arguments.
73 * @ return 0 if success / return -1 if failure.
[407]74 *****************************************************************************************/
[506]75int sys_thread_create(
76  struct thread_s             * new_thread,
77  const struct pthread_attr_s * user_attr,
78  const void                  * start_func,
79  const void                  * start_args );
[16]80
[407]81/******************************************************************************************
[23]82 * [3] This blocking function suspend execution of the calling thread until completion
83 * of another target thread identified by the <trdid> argument.
[421]84 * The target thread must be joinable (running in ATTACHED mode), and must be different
85 * from the calling thread.
[23]86 * If the <exit_value> argument is not NULL, the value passed to pthread_exit() by the
87 * target thread is stored in the location referenced by exit_value.
[407]88 ******************************************************************************************
[23]89 * @ trdid     : [in]  target thread identifier.
90 * @ thread    : [out] buffer for exit_value returned by target thread.
91 * @ return 0 if success / return -1 if failure.
[407]92 *****************************************************************************************/
[23]93int sys_thread_join( trdid_t    trdid,
94                     void    ** exit_value );
[16]95
[407]96/******************************************************************************************
[23]97 * [4] This function detach a joinable thread.
[407]98 ******************************************************************************************
[409]99 * @ trdid   : thread identifier.
[23]100 * @ return 0 if success / return -1 if failure.
[407]101 *****************************************************************************************/
[23]102int sys_thread_detach( trdid_t  trdid );
[16]103
[407]104/******************************************************************************************
[409]105 * [5] This function requests a target thread identified by its <trdid> argument
[436]106 * to be cancelled. It calls the thread_kill() function to block the target thread
107 * on the THREAD_BLOCKED_GLOBAL condition, and to set the THREAD_FLAG_REQ_DELETE.
[409]108 * The thread will be detached from its process, and the memory allocated to the thread
[436]109 * descriptor will be released by the scheduler at the next scheduling point.
[409]110 ******************************************************************************************
111 * @ trdid   : thread identifier.
112 * @ return 0 if success / return -1 if illegal argument.
[407]113 *****************************************************************************************/
[409]114int sys_thread_cancel( trdid_t  trdid );
[16]115
[407]116/******************************************************************************************
[23]117 * [6] This function implement all operations on a POSIX unnamed semaphore,
118 * that can be shared by threads running in different clusters.
119 * The kernel structure representing a remote semaphore is in the remote_sem.h file,
120 * and the code implementing the operations is in the remore_sem.c file.
[407]121 ******************************************************************************************
[457]122 * @ vaddr         : semaphore virtual address in user space == identifier.
123 * @ operation     : SEM_INIT / SEM_DESTROY / SEM_GETVALUE / SEM_POST / SEM_WAIT.
124 * @ init_value    : initial semaphore value.
125 * @ current_value : pointer on buffer for current semaphore value.
[23]126 * @ return 0 if success / return -1 if failure.
[407]127 *****************************************************************************************/
[23]128int sys_sem( void       * vaddr,
129             uint32_t     operation,
[457]130             uint32_t     init_value,
131             uint32_t   * current_value );
[16]132
[407]133/******************************************************************************************
[23]134 * [7] This function implement all operations on a POSIX condition variable.
135 * The kernel structure representing a cond_var is defined in the remote_cv.h file,
136 * The code implementing the operations is defined in the remote_cv.c file.
[407]137 ******************************************************************************************
[23]138 * @ vaddr     : condvar virtual address in user space == identifier.
139 * @ operation : operation type (see below).
140 * @ attr      : mutex virtual address in user space == identifier.
141 * @ return 0 if success / return -1 if failure.
[407]142 *****************************************************************************************/
[23]143int sys_condvar( void     * condvar,
144                 uint32_t   operation,
145                 void     * mutex );
[16]146
[407]147/******************************************************************************************
[23]148 * [8] This function implement all operations on a POSIX barrier.
149 * The kernel structure representing a barrier is defined in the remote_barrier.h file.
150 * The code implementting the operations is defined in the remote_barrier.c file.
[407]151 ******************************************************************************************
[23]152 * @ vaddr     : barrier virtual address in user space == identifier.
153 * @ operation : BARRIER_INIT / BARRIER_DESTROY / BARRIER_WAIT.
154 * @ count     : number of expected threads (only used by BARRIER_INIT operation).
155 * @ return 0 if success / return -1 if failure.
[407]156 *****************************************************************************************/
[23]157int sys_barrier( void     * vaddr,
158                 uint32_t   operation,
159                 uint32_t   count );
[16]160
[407]161/******************************************************************************************
[23]162 * [9] This function implement all operations on a POSIX mutex.
163 * The kernel structure representing a barrier is defined in the remote_barrier.h file.
164 * The code implementting the operations is defined in the remote_barrier.c file.
[407]165 ******************************************************************************************
[23]166 * @ vaddr     : mutex virtual address in user space == identifier.
167 * @ operation : MUTEX_INIT / MUTEX_DESTROY / MUTEX_LOCK / MUTEX_UNLOCK
168 * @ attr      : mutex attributes (non supported yet => must be 0).
169 * @ return 0 if success / return -1 if failure.
[407]170 *****************************************************************************************/
[23]171int sys_mutex( void     * vaddr,
172               uint32_t   operation,
173               uint32_t   count );
[16]174
[407]175/******************************************************************************************
[408]176 * [10] This function implement the exit system call terminating a POSIX process.
[440]177 * It can be called by any thread running in any cluster.
[443]178 * It uses both remote accesses to access the owner process descriptor, and the
179 * RPC_PROCESS_SIGACTION to delete remote process and thread descriptors.
[433]180 * In the present implementation, this function implements actually the _exit():
[440]181 * - it does not flush open output streams.
[433]182 * - it does not close open streams.
[407]183 ******************************************************************************************
[408]184 * @ status   : terminaison status (not used in present implementation).
[407]185 *****************************************************************************************/
[409]186int sys_exit( uint32_t status );
[16]187
[407]188/******************************************************************************************
[408]189 * [11] This function remove an existing mapping defined by the <addr> and <size>
[407]190 * arguments in user space.
191 ******************************************************************************************
192 * @ addr  : base address in user space.
193 * # size  : number of bytes.
[23]194 * @ return 0 if success / return -1 if failure.
[407]195 *****************************************************************************************/
196int sys_munmap( void     * addr,
197                uint32_t   size );
[16]198
[407]199/******************************************************************************************
200 * [12] This function open or create an open file descriptor.
201 ******************************************************************************************
[23]202 * @ pathname   : pathname (can be relative or absolute).
[445]203 * @ flags      : bit vector attributes (see in shared_fcntl.h file)
[23]204 * @ mode       : access rights.
205 * @ return file descriptor index in fd_array if success / return -1 if failure.
[407]206 *****************************************************************************************/
[506]207int sys_open( const char * pathname,
208              uint32_t     flags,
209              uint32_t     mode );
[16]210
[407]211/******************************************************************************************
212 * [13] This function map physical memory (or a file) in the calling thread virtual space.
213 * The <attr> argument is a pointer on a structure for arguments (see shared_syscalls.h).
214 ******************************************************************************************
215 * @ attr       : pointer on attributes structure.
216 * @ return 0 if success / return -1 if failure.
217 *****************************************************************************************/
218int sys_mmap( mmap_attr_t * attr );
[23]219
[407]220/******************************************************************************************
[23]221 * [14] This function read bytes from an open file identified by its file descriptor.
[407]222 * The file can be a regular file or character oriented device.
[408]223 * IRQs are enabled during this system call.
[407]224 ******************************************************************************************
[23]225 * @ file_id  : open file index in fd_array.
226 * @ buf      : buffer virtual address in user space.
227 * @ count    : number of bytes.
228 * @ return number of bytes actually read if success / returns -1 if failure.
[407]229 *****************************************************************************************/
[23]230int sys_read( uint32_t   file_id,
231              void     * buf,
232              uint32_t   count );
[16]233
[407]234/******************************************************************************************
[23]235 * [15] This function writes bytes to an open file identified by its file descriptor.
[407]236 * The file can be a regular file or character oriented device.
[408]237 * IRQs are enabled during this system call.
[407]238 ******************************************************************************************
[23]239 * @ file_id  : open file index in fd_array.
240 * @ buf      : buffer virtual address in user space.
241 * @ count    : number of bytes.
242 * @ return number of bytes actually written if success / returns -1 if failure.
[407]243 *****************************************************************************************/
[23]244int sys_write( uint32_t   file_id,
245               void     * buf,
246               uint32_t   count );
[16]247
[407]248/******************************************************************************************
249 * [16] This function repositions the offset of the file descriptor identified by <file_id>,
250 * according to the operation type defined by the <whence> argument.
251 ******************************************************************************************
[23]252 * @ file_id  : open file index in fd_array.
[407]253 * @ offset   : used to compute new offset value.
[23]254 * @ whence   : operation type (see below).
255 * @ return 0 if success / returns -1 if failure.
[407]256 *****************************************************************************************/
[23]257int sys_lseek( xptr_t    file_id,
258               uint32_t  offset,
259               uint32_t  whence );
[16]260
[407]261/******************************************************************************************
[23]262 * [17] This function release the memory allocated for the file descriptor identified by
263 * the <file_id> argument, and remove the fd array_entry in all copies of the process
264 * descriptor.
[407]265 ******************************************************************************************
[23]266  file_id   : file descriptor index in fd_array.
267 * @ return 0 if success / returns -1 if failure.
[407]268 *****************************************************************************************/
[23]269int sys_close( uint32_t file_id );
[16]270
[407]271/******************************************************************************************
272 * [18] This function removes a directory entry identified by the <pathname> from the
[23]273 * directory, and decrement the link count of the file referenced by the link.
274 * If the link count reduces to zero, and no process has the file open, then all resources
275 * associated with the file are reclaimed.  If one or more process have the file open when
276 * the last link is removed, the link is removed, but the removal of the file is delayed
277 * until all references to it have been closed.
[407]278 ******************************************************************************************
[23]279 * @ pathname   : pathname (can be relative or absolute).
280 * @ return 0 if success / returns -1 if failure.
[407]281 *****************************************************************************************/
[506]282int sys_unlink( const char * pathname );
[16]283
[407]284/******************************************************************************************
[23]285 * [19] This function creates in the calling thread cluster an unnamed pipe, and two
286 * (read and write) file descriptors.
[407]287 * TODO not implemented yet...
288 ******************************************************************************************
[23]289 * @ file_id[0] : [out] read only file descriptor index.
290 * @ file_id[1] : [out] write only file descriptor index.
291 * @ return 0 if success / return -1 if failure.
[407]292 *****************************************************************************************/
[23]293int sys_pipe( uint32_t file_id[2] );
[16]294
[407]295/******************************************************************************************
[23]296 * [20] This function change the current working directory in reference process descriptor.
[407]297 ******************************************************************************************
[23]298 * @ pathname   : pathname (can be relative or absolute).
299 * @ return 0 if success / returns -1 if failure.
[407]300 *****************************************************************************************/
[506]301int sys_chdir( const char * pathname );
[16]302
[407]303/******************************************************************************************
[23]304 * [21] This function creates a new directory in file system.
[407]305 ******************************************************************************************
[23]306 * @ pathname   : pathname (can be relative or absolute).
307 * @ mode       : access rights (as defined in chmod).
308 * @ return 0 if success / returns -1 if failure.
[407]309 *****************************************************************************************/
[279]310int sys_mkdir( char    * pathname,
[23]311               uint32_t  mode );
[16]312
[407]313/******************************************************************************************
[23]314 * [22] This function creates a named FIFO file in the calling thread cluster.
315 * The associated read and write file descriptors mut be be  explicitely created
[407]316 * using the sys_open() function.
317 ******************************************************************************************
[23]318 * @ pathname   : pathname (can be relative or absolute).
319 * @ mode       : access rights (as defined in chmod).
320 * @ return 0 if success / returns -1 if failure.
[407]321 *****************************************************************************************/
[23]322int sys_mkfifo( char     * pathname,
323                uint32_t   mode );
[16]324
[407]325/******************************************************************************************
326 * [23] This function open a directory, that must exist in the file system, returning
327 * a DIR pointer on the directory in user space.
328 ******************************************************************************************
[23]329 * @ pathname   : pathname (can be relative or absolute).
[407]330 * @ dirp       : [out] buffer for pointer on user directory (DIR).
[23]331 * @ return 0 if success / returns -1 if failure.
[407]332 *****************************************************************************************/
333int sys_opendir( char * pathname,
334                 DIR ** dirp );
[16]335
[407]336/******************************************************************************************
337 * [24] This function returns an user pointer on the dirent structure describing the
338 * next directory entry in the directory identified by the <dirp> argument.
339 ******************************************************************************************
340 * @ dirp     : user pointer identifying the searched directory.
341 * @ dentp    : [out] buffer for pointer on user direntory entry (dirent).
342 * @ return O if success / returns -1 if failure.
343 *****************************************************************************************/
344int sys_readdir( DIR            * dirp,
345                 struct dirent ** dentp );
346
347/******************************************************************************************
348 * [25] This function closes the directory identified by the <dirp> argument, and releases
349 * all structures associated with the <dirp> pointer.
350 ******************************************************************************************
351 * @ dirp     : user pointer identifying the directory.
[23]352 * @ return 0 if success / returns -1 if failure.
[407]353 *****************************************************************************************/
354int sys_closedir( DIR * dirp );
[16]355
[407]356/******************************************************************************************
[23]357 * [26] This function returns the pathname of the current working directory.
[407]358 ******************************************************************************************
[23]359 * buf     : buffer addres in user space.
360 * nbytes  : user buffer size in bytes.
361 * @ return 0 if success / returns -1 if failure.
[407]362 *****************************************************************************************/
[23]363int sys_getcwd( char     * buf,
364                uint32_t   nbytes );
[16]365
[407]366/******************************************************************************************
[437]367 * [27] This function tests whether a given file descriptor dentified by the <file_id>
368 * argument is an open file descriptor referring to a terminal.
369 ******************************************************************************************
370 * @ file_id   : file descriptor index
371 * @ return 1 if it is a TXT device / return 0 if it is not a TXT device.
[407]372 *****************************************************************************************/
[437]373int sys_isatty( uint32_t file_id );
[16]374
[407]375/******************************************************************************************
[23]376 * [28] This function forces the calling thread to sleep, for a fixed number of cycles.
[407]377 ******************************************************************************************
[23]378 * cycles   : number of cycles.
[407]379 *****************************************************************************************/
[23]380int sys_alarm( uint32_t cycles );
[16]381
[407]382/******************************************************************************************
383 * [29] This function removes a directory file whose name is given by <pathname>.
384 * The directory must not have any entries other than `.' and `..'.
385 ******************************************************************************************
[23]386 * @ pathname   : pathname (can be relative or absolute).
387 * @ return 0 if success / returns -1 if failure.
[407]388 *****************************************************************************************/
[506]389int sys_rmdir( const char * pathname );
[16]390
[407]391/******************************************************************************************
[23]392 * [30] This function implement the operations related to User Thread Local Storage.
393 * It is actually implemented as an uint32_t variable in the thread descriptor.
[407]394 ******************************************************************************************
[23]395 * @ operation  : UTLS operation type as defined below.
396 * @ value      : argument value for the UTLS_SET operation.
397 * @ return value for the UTLS_GET and UTLS_GET_ERRNO / return -1 if failure.
[407]398 *****************************************************************************************/
[23]399int sys_utls( uint32_t operation,
400              uint32_t value );
[16]401
[407]402/******************************************************************************************
[23]403 * [31] This function change the acces rights for the file/dir identified by the
404 * pathname argument.
[407]405 ******************************************************************************************
[23]406 * @ pathname   : pathname (can be relative or absolute).
407 * @ rights     : acces rights.
408 * @ return 0 if success / returns -1 if failure.
[407]409 *****************************************************************************************/
[506]410int sys_chmod( const char * pathname,
411               uint32_t     rights );
[16]412
[407]413/******************************************************************************************
[23]414 * [32] This function associate a specific signal handler to a given signal type.
415 * Tee handlers for the SIGKILL and SIGSTOP signals cannot be redefined.
[407]416 ******************************************************************************************
[23]417 * @ sig_id    : index defining signal type (from 1 to 31).
418 * @ handler   : pointer on fonction implementing the specific handler.
419 * @ return 0 if success / returns -1 if failure.
[407]420 *****************************************************************************************/
[23]421int sys_signal( uint32_t   sig_id,
422                void     * handler );
[16]423
[407]424/******************************************************************************************
[23]425 * [33] This function returns in the structure <tv>, defined in the time.h file,
426 * the current time (in seconds & micro-seconds).
427 * It is computed from the calling core descriptor.
428 * The timezone is not supported.
[407]429 ******************************************************************************************
[23]430 * @ tv      : pointer on the timeval structure.
431 * @ tz      : pointer on the timezone structure : must be NULL.       
432 * @ return 0 if success / returns -1 if failure.
[407]433 *****************************************************************************************/
[50]434int sys_timeofday( struct timeval  * tv,
435                   struct timezone * tz );
[16]436
[407]437/******************************************************************************************
[433]438 * [34] This function implements the "kill" system call on the kernel side.
[23]439 * It register the signal defined by the <sig_id> argument in all thread descriptors
440 * of a target process identified by the <pid> argument. This is done in all clusters
441 * containing threads for the target process.
442 * It can be executed by any thread running in any cluster, as this function uses
[407]443 * remote access to traverse the list of process copies stored in the owner cluster,
[23]444 * and the RPC_SIGNAL_RISE to signal the remote threads.
[421]445 * This function does nothing for (sig_id == 0). This can be used to check process pid.
446 * TODO : This first implementation supports only SIGKILL / SIGSTOP / SIGCONT values.
[407]447 ******************************************************************************************
[16]448 * @ pid      : target process identifier.
[433]449 * @ sig_id   : index defining the signal type.
[23]450 * @ return 0 if success / returns -1 if failure.
[407]451 *****************************************************************************************/
[16]452int sys_kill( pid_t    pid,
[23]453              uint32_t sig_id );
[16]454
[407]455/******************************************************************************************
[433]456 * [35] This function implements the "getpid" system call on the kernel side.
[407]457 ******************************************************************************************
458 * @ returns the process PID for the calling thread.
459 *****************************************************************************************/
[479]460int sys_getpid( void );
[1]461
[407]462/******************************************************************************************
[433]463 * [36] This function implement the "fork" system call on the kernel side.
464 * The calling process descriptor (parent process), and the associated thread descriptor
465 * are replicated in a - likely - remote cluster, that becomes the child process owner.
466 * The child process get a new PID, and is linked to the parent PID. The child process
467 * inherit from its parent the memory image, and all open files (including the TXT).
468 * The child process becomes the TXT terminal owner.
[1]469 * The target cluster depends on the "fork_user" flag and "fork_cxy" variable that can be
470 * stored in the calling thread descriptor by the specific fork_place() system call.
[433]471 * If not, the kernel function makes a query to the DQDT to select the target cluster.
[407]472 ******************************************************************************************
473 * @ if success, returns child process PID to parent, and return O to child.
474 * @ if failure, returns -1 to parent / no child process is created.
475 *****************************************************************************************/
[479]476int sys_fork( void );
[1]477
[407]478/******************************************************************************************
[433]479 * [37] This function implement the "exec" system call on the kernel side.
480 * It creates, in the same cluster as the calling thread, a new process descriptor,
481 * and a new associated main thread descriptor, executing a new memory image defined
482 * by the <filename> argument. This new process inherit from the old process the PID
483 * and the PPID, as well as all open files (including the TXT).
484 * The old process descriptor, and all its threads are blocked, and marked for deletion.
485 * Therefore the exec syscall does not return to the calling thread in case of success.
486 * This function build an exec_info_t structure containing the new process arguments,
487 * as defined by the <arv> argument, and the new process environment variables,
488 * as defined by the <envp>  argument.
489 * TODO : the <argv> and <envp> arguments are not supported yet (both must be NULL).
[407]490 ******************************************************************************************
491 * @ filename : string pointer on .elf filename (pointer in user space)
492 * @ argv     : array of strings on process arguments (pointers in user space)
493 * @ envp     : array of strings on environment variables (pointers in user space)
[433]494 * @ does not return if success / returns -1 if failure.
[407]495 *****************************************************************************************/
[506]496int sys_exec( const char  * filename,
497              char        ** argv,
498              char        ** envp );
[1]499
[407]500/******************************************************************************************
501 * [38] This function  returns in the <stat> structure, defined in the "shared_syscalls.h"
502 * file, various informations on the file/directory identified by the <pathname> argument.
503 ******************************************************************************************
504 * @ pathname  : user pointer on file pathname.
505 * @ stat      : user pointer on the stat structure.
[23]506 * @ returns O if success / returns -1 if failure.
[407]507 *****************************************************************************************/
508int sys_stat( const char  * pathname,
509              struct stat * stat );
[1]510
[407]511/******************************************************************************************
[433]512 * [39] This blocking function waits a change of a child process state, that can be:
513 * - a termination of child following a process_make_exit().
514 * - a termination of child following a process_make_kill().
[421]515 * - a blocking of child following a SIGSTOP signal.
[433]516 * In case of a multi-thread process, this function must be called by the main thread
517 * runningin the reference cluster.
518 * When a change has been observed, it returns the PID of the child process, and stores
519 * in the <status> argument relevant information on the child state change.
[421]520 * The following macros can be used to extract information from status:
521 * - WIFEXITED(status)   : is true if the child process terminated with an exit().
[435]522 * - WIFSIGNALED(status) : is true if the child process killed by a signal.
[421]523 * - WIFSTOPPED(status)  : is true if the child process is stopped by a signal.
524 * - WEXITSTATUS(status) : returns the low-order 8 bits of the exit() argument.
525 * If a parent process terminates without waiting for all child processes to terminate,
526 * the remaining child processes are attached to the init process.
[433]527 * WARNING: negative values for the <pid> argument are not supported.
[421]528 ******************************************************************************************
[433]529 * @ searched_pid : searched child process identifier.
530 * @ status       : [out] child termination status.
531 * @ return child PID if success / return -1 if searched PID not found.
[407]532 *****************************************************************************************/
[421]533int sys_wait( uint32_t * status );
[1]534
[407]535/******************************************************************************************
536 * [40] This function returns the hardware platform parameters.
537 ******************************************************************************************
538 * @ x_size   : [out] number of clusters in a row.
539 * @ y_size   : [out] number of clusters in a column.
[421]540 * @ y_width  : [out] number of bits in Y field for CXY.
[407]541 * @ ncores   : [out] number of cores per cluster.
542 * @ return 0 if success / return -1 if illegal arguments
543 *****************************************************************************************/
544int sys_get_config( uint32_t * x_size,
545                    uint32_t * y_size,
[421]546                    uint32_t * y_width,
[407]547                    uint32_t * ncores );
[1]548
[407]549/******************************************************************************************
550 * [41] This function returns the calling core cluster and local index.
551 ******************************************************************************************
552 * @ cxy      : [out] cluster identifier (fixed format)
553 * @ lid      : [out] core local index in cluster.
554 * @ return 0 if success / return -1 if illegal arguments
555 *****************************************************************************************/
556int sys_get_core( uint32_t * cxy,
557                  uint32_t * lid );
[1]558
[407]559/******************************************************************************************
560 * [42] This function returns in a 64 bits user buffer the calling core cycles count.
561 * It uses both the hardware register and the core descriptor cycles count to take
562 * into account a possible harware register overflow  in 32 bits architectures.
563 ******************************************************************************************
564 * cycle    : [out] address of buffer in user space.
565 * @ return 0 if success / return -1 if illegal arguments
566 *****************************************************************************************/
567int sys_get_cycle( uint64_t * cycle );
568
569/******************************************************************************************
[421]570 * [43] This debug function displays on the kernel terminal TXT0 an user defined string,
571 * or the current state of a kernel structure, identified by the <type> argument.
[435]572 * The <arg0> and <arg1> arguments depends on the structure type:
573 * - DISPLAY_STRING          : an user defined string
574 * - DISPLAY_VMM             : VSL and GPT for a process identified by <pid>.
575 * - DISPLAY_SCHED           : all threads allocated to a scheduler <cxy> & <lid>.
576 * - DISPLAY_CLUSTER_PROCESS : all processes registered in a cluster identified by <cxy>. 
577 * - DISPLAY_TXT_PROCESS     : all processes registered in a cluster identified by <cxy>. 
578 * - DISPLAY_VFS             : all files registered in the VFS cache.
579 * - DISPLAY_CHDEV           : all registered channel devices.
[445]580 * - DISPLAY_DQDT            : all DQDT nodes.
[407]581 ******************************************************************************************
[435]582 * type      : [in] type of display
[421]583 * arg0      : [in] type dependant argument.
584 * arg1      : [in] type dependant argument.
[407]585 * @ return 0 if success / return -1 if illegal arguments
586 *****************************************************************************************/
[421]587int sys_display( reg_t  type,
588                 reg_t  arg0,
589                 reg_t  arg1 );
[407]590
591/******************************************************************************************
[457]592 * [44] TBD
593 ******************************************************************************************
594 * @ cxy    : cluster identifier.
595 * @ lid    : core local index.
596 * @ return 0 if success / return -1 if failure.
597 *****************************************************************************************/
598int sys_place( uint32_t cxy,
599               uint32_t lid );
600
601/******************************************************************************************
[407]602 * [45] This function block the calling thread on the THREAD_BLOCKED_GLOBAL condition,
603 * and deschedule.
604 ******************************************************************************************
605 * @ return 0 if success / returns -1 if failure.
606 *****************************************************************************************/
[479]607int sys_thread_sleep( void );
[407]608
609/******************************************************************************************
610 * [46] This function unblock the thread identified by its <trdid> from the
611 * THREAD_BLOCKED_GLOBAL condition.
612 ******************************************************************************************
613 * @ trdid  : target thread identifier.
614 * @ return 0 if success / return -1 if failure.
615 *****************************************************************************************/
[506]616int sys_thread_wakeup( trdid_t trdid );
[407]617
[421]618/******************************************************************************************
[443]619 * [47] This debug function is used to activate / desactivate the context switches trace
620 * for a core identified by the <cxy> and <lid> arguments.
[421]621 * It can be called by any other thread in the same process.
622 ******************************************************************************************
[443]623 * @ active     : activate trace if true / desactivate trace if false.
624 * @ cxy        : cluster identifier.
625 * @ lid        : core local index.
[421]626 * @ returns O if success / returns -1 if failure.
627 *****************************************************************************************/
[443]628int sys_trace( bool_t   active,
629               cxy_t    cxy, 
630               lid_t    lid );
[407]631
[421]632/******************************************************************************************
633 * [48] This function gives the process identified by the <pid> argument
634 * the exclusive ownership of its TXT_TX terminal (put it in foreground).
635 ******************************************************************************************
636 * @ pid    : process identifier.
637 * @ return 0 if success / return -1 if failure.
638 *****************************************************************************************/
639int sys_fg( pid_t   pid );
640
[445]641/******************************************************************************************
[457]642 * [49] This function returns a non-zero value in the <is_fg> buffer when the process
643 * identified by the <pid> argument is the current TXT owner.
[445]644 ******************************************************************************************
[457]645 * @ pid      : process identifier.
646 * @ is_fg    : pointer on buffer.
[445]647 * @ return 0 if success / return -1 if failure.
648 *****************************************************************************************/
[457]649int sys_is_fg( pid_t      pid,
650               uint32_t * is_fg );
[421]651
[16]652#endif  // _SYSCALLS_H_
Note: See TracBrowser for help on using the repository browser.