source: trunk/kernel/syscalls/syscalls.h @ 443

Last change on this file since 443 was 443, checked in by alain, 4 years ago

Fix few bugs whike debugging the sort multi-thread application.

File size: 36.7 KB
Line 
1/*
2 * syscalls.h - Kernel side services for syscall handling.
3 *
4 * Author     Alain Greiner (2016,2017)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#ifndef _SYSCALLS_H_
25#define _SYSCALLS_H_
26
27#include <hal_types.h>
28#include <shared_syscalls.h>
29
30/**   Forward declarations  *****/
31
32struct thread_s;                  // defined in thread.h
33struct pthread_attr_s;            // defined in thread.h
34struct vfs_stat_s;                // defined in vfs.h
35struct vfs_dirent_s;              // defined in vfs.h
36struct mmap_attr_s;               // defined in vmm.h
37
38/******************************************************************************************
39 * [0] This function terminates the execution of the calling user thread,
40 * and makes the exit_value pointer available to any successful pthread_join() with the
41 * terminating thread.
42 * It actually set the THREAD_SIG_EXIT signal, set the THREAD_BLOCKED_GLOBAL bit in the
43 * thread descriptor and deschedule.
44 * The thread will be detached from its process, and the memory allocated to the thread
45 * descriptor will be released later by the scheduler.
46 ******************************************************************************************
47 * @ exit_vallue  : pointer to be returned to joining thread if thread is attached.
48 * @ return 0 if success / return -1 if all locks not released or illegal argument.
49 *****************************************************************************************/
50int sys_thread_exit( void * exit_value );
51
52/******************************************************************************************
53 * [1] This function calls the scheduler for the core running the calling thread.
54 ******************************************************************************************
55 * @ x_size   : [out] number of clusters in a row.
56 * @ y_size   : [out] number of clusters in a column.
57 * @ ncores   : [out] number of cores per cluster.
58 * @ return always 0.
59 *****************************************************************************************/
60int sys_thread_yield();
61
62/******************************************************************************************
63 * [2] This function creates a new user thread. The <user_attr> argument is a pointer
64 * on astructure containing the thread attributes, defined in thread.h file.
65 ******************************************************************************************
66 * @ new_thread  : [out] local pointer on created thread descriptor.
67 * @ user_attr   : [in]  pointer on thread attributes structure.
68 * @ start_func  : [in]  pointer on start function.
69 * @ start_args  : [in]  pointer on start function arguments.
70 * @ return 0 if success / return -1 if failure.
71 *****************************************************************************************/
72int sys_thread_create( struct thread_s        * new_thread,
73                       struct pthread_attr_s  * user_attr,
74                       void                   * start_func,
75                       void                   * start_args );
76
77/******************************************************************************************
78 * [3] This blocking function suspend execution of the calling thread until completion
79 * of another target thread identified by the <trdid> argument.
80 * The target thread must be joinable (running in ATTACHED mode), and must be different
81 * from the calling thread.
82 * If the <exit_value> argument is not NULL, the value passed to pthread_exit() by the
83 * target thread is stored in the location referenced by exit_value.
84 ******************************************************************************************
85 * @ trdid     : [in]  target thread identifier.
86 * @ thread    : [out] buffer for exit_value returned by target thread.
87 * @ return 0 if success / return -1 if failure.
88 *****************************************************************************************/
89int sys_thread_join( trdid_t    trdid,
90                     void    ** exit_value );
91
92/******************************************************************************************
93 * [4] This function detach a joinable thread.
94 ******************************************************************************************
95 * @ trdid   : thread identifier.
96 * @ return 0 if success / return -1 if failure.
97 *****************************************************************************************/
98int sys_thread_detach( trdid_t  trdid );
99
100/******************************************************************************************
101 * [5] This function requests a target thread identified by its <trdid> argument
102 * to be cancelled. It calls the thread_kill() function to block the target thread
103 * on the THREAD_BLOCKED_GLOBAL condition, and to set the THREAD_FLAG_REQ_DELETE.
104 * The thread will be detached from its process, and the memory allocated to the thread
105 * descriptor will be released by the scheduler at the next scheduling point.
106 ******************************************************************************************
107 * @ trdid   : thread identifier.
108 * @ return 0 if success / return -1 if illegal argument.
109 *****************************************************************************************/
110int sys_thread_cancel( trdid_t  trdid );
111
112/******************************************************************************************
113 * [6] This function implement all operations on a POSIX unnamed semaphore,
114 * that can be shared by threads running in different clusters.
115 * The kernel structure representing a remote semaphore is in the remote_sem.h file,
116 * and the code implementing the operations is in the remore_sem.c file.
117 ******************************************************************************************
118 * @ vaddr     : semaphore virtual address in user space == identifier.
119 * @ operation : SEM_INIT / SEM_DESTROY / SEM_GETVALUE / SEM_POST / SEM_WAIT.
120 * @ value     : pointer on in/out argument in user space.
121 * @ return 0 if success / return -1 if failure.
122 *****************************************************************************************/
123int sys_sem( void       * vaddr,
124             uint32_t     operation,
125             uint32_t   * value );
126
127/******************************************************************************************
128 * [7] This function implement all operations on a POSIX condition variable.
129 * The kernel structure representing a cond_var is defined in the remote_cv.h file,
130 * The code implementing the operations is defined in the remote_cv.c file.
131 ******************************************************************************************
132 * @ vaddr     : condvar virtual address in user space == identifier.
133 * @ operation : operation type (see below).
134 * @ attr      : mutex virtual address in user space == identifier.
135 * @ return 0 if success / return -1 if failure.
136 *****************************************************************************************/
137int sys_condvar( void     * condvar,
138                 uint32_t   operation,
139                 void     * mutex );
140
141/******************************************************************************************
142 * [8] This function implement all operations on a POSIX barrier.
143 * The kernel structure representing a barrier is defined in the remote_barrier.h file.
144 * The code implementting the operations is defined in the remote_barrier.c file.
145 ******************************************************************************************
146 * @ vaddr     : barrier virtual address in user space == identifier.
147 * @ operation : BARRIER_INIT / BARRIER_DESTROY / BARRIER_WAIT.
148 * @ count     : number of expected threads (only used by BARRIER_INIT operation).
149 * @ return 0 if success / return -1 if failure.
150 *****************************************************************************************/
151int sys_barrier( void     * vaddr,
152                 uint32_t   operation,
153                 uint32_t   count );
154
155/******************************************************************************************
156 * [9] This function implement all operations on a POSIX mutex.
157 * The kernel structure representing a barrier is defined in the remote_barrier.h file.
158 * The code implementting the operations is defined in the remote_barrier.c file.
159 ******************************************************************************************
160 * @ vaddr     : mutex virtual address in user space == identifier.
161 * @ operation : MUTEX_INIT / MUTEX_DESTROY / MUTEX_LOCK / MUTEX_UNLOCK
162 * @ attr      : mutex attributes (non supported yet => must be 0).
163 * @ return 0 if success / return -1 if failure.
164 *****************************************************************************************/
165int sys_mutex( void     * vaddr,
166               uint32_t   operation,
167               uint32_t   count );
168
169/******************************************************************************************
170 * [10] This function implement the exit system call terminating a POSIX process.
171 * It can be called by any thread running in any cluster.
172 * It uses both remote accesses to access the owner process descriptor, and the
173 * RPC_PROCESS_SIGACTION to delete remote process and thread descriptors.
174 * In the present implementation, this function implements actually the _exit():
175 * - it does not flush open output streams.
176 * - it does not close open streams.
177 ******************************************************************************************
178 * @ status   : terminaison status (not used in present implementation).
179 *****************************************************************************************/
180int sys_exit( uint32_t status );
181
182/******************************************************************************************
183 * [11] This function remove an existing mapping defined by the <addr> and <size>
184 * arguments in user space.
185 ******************************************************************************************
186 * @ addr  : base address in user space.
187 * # size  : number of bytes.
188 * @ return 0 if success / return -1 if failure.
189 *****************************************************************************************/
190int sys_munmap( void     * addr,
191                uint32_t   size );
192
193/******************************************************************************************
194 * [12] This function open or create an open file descriptor.
195 ******************************************************************************************
196 * @ pathname   : pathname (can be relative or absolute).
197 * @ flags      : bit vector attributes (see below).
198 * @ mode       : access rights.
199 * @ return file descriptor index in fd_array if success / return -1 if failure.
200 *****************************************************************************************/
201int sys_open( char    * pathname,
202              uint32_t  flags,
203              uint32_t  mode );
204
205/******************************************************************************************
206 * [13] This function map physical memory (or a file) in the calling thread virtual space.
207 * The <attr> argument is a pointer on a structure for arguments (see shared_syscalls.h).
208 ******************************************************************************************
209 * @ attr       : pointer on attributes structure.
210 * @ return 0 if success / return -1 if failure.
211 *****************************************************************************************/
212int sys_mmap( mmap_attr_t * attr );
213
214/******************************************************************************************
215 * [14] This function read bytes from an open file identified by its file descriptor.
216 * The file can be a regular file or character oriented device.
217 * IRQs are enabled during this system call.
218 ******************************************************************************************
219 * @ file_id  : open file index in fd_array.
220 * @ buf      : buffer virtual address in user space.
221 * @ count    : number of bytes.
222 * @ return number of bytes actually read if success / returns -1 if failure.
223 *****************************************************************************************/
224int sys_read( uint32_t   file_id,
225              void     * buf,
226              uint32_t   count );
227
228/******************************************************************************************
229 * [15] This function writes bytes to an open file identified by its file descriptor.
230 * The file can be a regular file or character oriented device.
231 * IRQs are enabled during this system call.
232 ******************************************************************************************
233 * @ file_id  : open file index in fd_array.
234 * @ buf      : buffer virtual address in user space.
235 * @ count    : number of bytes.
236 * @ return number of bytes actually written if success / returns -1 if failure.
237 *****************************************************************************************/
238int sys_write( uint32_t   file_id,
239               void     * buf,
240               uint32_t   count );
241
242/******************************************************************************************
243 * [16] This function repositions the offset of the file descriptor identified by <file_id>,
244 * according to the operation type defined by the <whence> argument.
245 ******************************************************************************************
246 * @ file_id  : open file index in fd_array.
247 * @ offset   : used to compute new offset value.
248 * @ whence   : operation type (see below).
249 * @ return 0 if success / returns -1 if failure.
250 *****************************************************************************************/
251int sys_lseek( xptr_t    file_id,
252               uint32_t  offset,
253               uint32_t  whence );
254
255/******************************************************************************************
256 * [17] This function release the memory allocated for the file descriptor identified by
257 * the <file_id> argument, and remove the fd array_entry in all copies of the process
258 * descriptor.
259 ******************************************************************************************
260  file_id   : file descriptor index in fd_array.
261 * @ return 0 if success / returns -1 if failure.
262 *****************************************************************************************/
263int sys_close( uint32_t file_id );
264
265/******************************************************************************************
266 * [18] This function removes a directory entry identified by the <pathname> from the
267 * directory, and decrement the link count of the file referenced by the link.
268 * If the link count reduces to zero, and no process has the file open, then all resources
269 * associated with the file are reclaimed.  If one or more process have the file open when
270 * the last link is removed, the link is removed, but the removal of the file is delayed
271 * until all references to it have been closed.
272 ******************************************************************************************
273 * @ pathname   : pathname (can be relative or absolute).
274 * @ return 0 if success / returns -1 if failure.
275 *****************************************************************************************/
276int sys_unlink( char * pathname );
277
278/******************************************************************************************
279 * [19] This function creates in the calling thread cluster an unnamed pipe, and two
280 * (read and write) file descriptors.
281 * TODO not implemented yet...
282 ******************************************************************************************
283 * @ file_id[0] : [out] read only file descriptor index.
284 * @ file_id[1] : [out] write only file descriptor index.
285 * @ return 0 if success / return -1 if failure.
286 *****************************************************************************************/
287int sys_pipe( uint32_t file_id[2] );
288
289/******************************************************************************************
290 * [20] This function change the current working directory in reference process descriptor.
291 ******************************************************************************************
292 * @ pathname   : pathname (can be relative or absolute).
293 * @ return 0 if success / returns -1 if failure.
294 *****************************************************************************************/
295int sys_chdir( char * pathname );
296
297/******************************************************************************************
298 * [21] This function creates a new directory in file system.
299 ******************************************************************************************
300 * @ pathname   : pathname (can be relative or absolute).
301 * @ mode       : access rights (as defined in chmod).
302 * @ return 0 if success / returns -1 if failure.
303 *****************************************************************************************/
304int sys_mkdir( char    * pathname,
305               uint32_t  mode );
306
307/******************************************************************************************
308 * [22] This function creates a named FIFO file in the calling thread cluster.
309 * The associated read and write file descriptors mut be be  explicitely created
310 * using the sys_open() function.
311 ******************************************************************************************
312 * @ pathname   : pathname (can be relative or absolute).
313 * @ mode       : access rights (as defined in chmod).
314 * @ return 0 if success / returns -1 if failure.
315 *****************************************************************************************/
316int sys_mkfifo( char     * pathname,
317                uint32_t   mode );
318
319/******************************************************************************************
320 * [23] This function open a directory, that must exist in the file system, returning
321 * a DIR pointer on the directory in user space.
322 ******************************************************************************************
323 * @ pathname   : pathname (can be relative or absolute).
324 * @ dirp       : [out] buffer for pointer on user directory (DIR).
325 * @ return 0 if success / returns -1 if failure.
326 *****************************************************************************************/
327int sys_opendir( char * pathname,
328                 DIR ** dirp );
329
330/******************************************************************************************
331 * [24] This function returns an user pointer on the dirent structure describing the
332 * next directory entry in the directory identified by the <dirp> argument.
333 ******************************************************************************************
334 * @ dirp     : user pointer identifying the searched directory.
335 * @ dentp    : [out] buffer for pointer on user direntory entry (dirent).
336 * @ return O if success / returns -1 if failure.
337 *****************************************************************************************/
338int sys_readdir( DIR            * dirp,
339                 struct dirent ** dentp );
340
341/******************************************************************************************
342 * [25] This function closes the directory identified by the <dirp> argument, and releases
343 * all structures associated with the <dirp> pointer.
344 ******************************************************************************************
345 * @ dirp     : user pointer identifying the directory.
346 * @ return 0 if success / returns -1 if failure.
347 *****************************************************************************************/
348int sys_closedir( DIR * dirp );
349
350/******************************************************************************************
351 * [26] This function returns the pathname of the current working directory.
352 ******************************************************************************************
353 * buf     : buffer addres in user space.
354 * nbytes  : user buffer size in bytes.
355 * @ return 0 if success / returns -1 if failure.
356 *****************************************************************************************/
357int sys_getcwd( char     * buf,
358                uint32_t   nbytes );
359
360/******************************************************************************************
361 * [27] This function tests whether a given file descriptor dentified by the <file_id>
362 * argument is an open file descriptor referring to a terminal.
363 ******************************************************************************************
364 * @ file_id   : file descriptor index
365 * @ return 1 if it is a TXT device / return 0 if it is not a TXT device.
366 *****************************************************************************************/
367int sys_isatty( uint32_t file_id );
368
369/******************************************************************************************
370 * [28] This function forces the calling thread to sleep, for a fixed number of cycles.
371 ******************************************************************************************
372 * cycles   : number of cycles.
373 *****************************************************************************************/
374int sys_alarm( uint32_t cycles );
375
376/******************************************************************************************
377 * [29] This function removes a directory file whose name is given by <pathname>.
378 * The directory must not have any entries other than `.' and `..'.
379 ******************************************************************************************
380 * @ pathname   : pathname (can be relative or absolute).
381 * @ return 0 if success / returns -1 if failure.
382 *****************************************************************************************/
383int sys_rmdir( char * pathname ); 
384
385/******************************************************************************************
386 * [30] This function implement the operations related to User Thread Local Storage.
387 * It is actually implemented as an uint32_t variable in the thread descriptor.
388 ******************************************************************************************
389 * @ operation  : UTLS operation type as defined below.
390 * @ value      : argument value for the UTLS_SET operation.
391 * @ return value for the UTLS_GET and UTLS_GET_ERRNO / return -1 if failure.
392 *****************************************************************************************/
393int sys_utls( uint32_t operation,
394              uint32_t value );
395
396/******************************************************************************************
397 * [31] This function change the acces rights for the file/dir identified by the
398 * pathname argument.
399 ******************************************************************************************
400 * @ pathname   : pathname (can be relative or absolute).
401 * @ rights     : acces rights.
402 * @ return 0 if success / returns -1 if failure.
403 *****************************************************************************************/
404int sys_chmod( char     * pathname,
405               uint32_t   rights );
406
407/******************************************************************************************
408 * [32] This function associate a specific signal handler to a given signal type.
409 * Tee handlers for the SIGKILL and SIGSTOP signals cannot be redefined.
410 ******************************************************************************************
411 * @ sig_id    : index defining signal type (from 1 to 31).
412 * @ handler   : pointer on fonction implementing the specific handler.
413 * @ return 0 if success / returns -1 if failure.
414 *****************************************************************************************/
415int sys_signal( uint32_t   sig_id,
416                void     * handler );
417
418/******************************************************************************************
419 * [33] This function returns in the structure <tv>, defined in the time.h file,
420 * the current time (in seconds & micro-seconds).
421 * It is computed from the calling core descriptor.
422 * The timezone is not supported.
423 ******************************************************************************************
424 * @ tv      : pointer on the timeval structure.
425 * @ tz      : pointer on the timezone structure : must be NULL.       
426 * @ return 0 if success / returns -1 if failure.
427 *****************************************************************************************/
428int sys_timeofday( struct timeval  * tv,
429                   struct timezone * tz );
430
431/******************************************************************************************
432 * [34] This function implements the "kill" system call on the kernel side.
433 * It register the signal defined by the <sig_id> argument in all thread descriptors
434 * of a target process identified by the <pid> argument. This is done in all clusters
435 * containing threads for the target process.
436 * It can be executed by any thread running in any cluster, as this function uses
437 * remote access to traverse the list of process copies stored in the owner cluster,
438 * and the RPC_SIGNAL_RISE to signal the remote threads.
439 * This function does nothing for (sig_id == 0). This can be used to check process pid.
440 * TODO : This first implementation supports only SIGKILL / SIGSTOP / SIGCONT values.
441 ******************************************************************************************
442 * @ pid      : target process identifier.
443 * @ sig_id   : index defining the signal type.
444 * @ return 0 if success / returns -1 if failure.
445 *****************************************************************************************/
446int sys_kill( pid_t    pid,
447              uint32_t sig_id );
448
449/******************************************************************************************
450 * [35] This function implements the "getpid" system call on the kernel side.
451 ******************************************************************************************
452 * @ returns the process PID for the calling thread.
453 *****************************************************************************************/
454int sys_getpid();
455
456/******************************************************************************************
457 * [36] This function implement the "fork" system call on the kernel side.
458 * The calling process descriptor (parent process), and the associated thread descriptor
459 * are replicated in a - likely - remote cluster, that becomes the child process owner.
460 * The child process get a new PID, and is linked to the parent PID. The child process
461 * inherit from its parent the memory image, and all open files (including the TXT).
462 * The child process becomes the TXT terminal owner.
463 * The target cluster depends on the "fork_user" flag and "fork_cxy" variable that can be
464 * stored in the calling thread descriptor by the specific fork_place() system call.
465 * If not, the kernel function makes a query to the DQDT to select the target cluster.
466 ******************************************************************************************
467 * @ if success, returns child process PID to parent, and return O to child.
468 * @ if failure, returns -1 to parent / no child process is created.
469 *****************************************************************************************/
470int sys_fork();
471
472/******************************************************************************************
473 * [37] This function implement the "exec" system call on the kernel side.
474 * It creates, in the same cluster as the calling thread, a new process descriptor,
475 * and a new associated main thread descriptor, executing a new memory image defined
476 * by the <filename> argument. This new process inherit from the old process the PID
477 * and the PPID, as well as all open files (including the TXT).
478 * The old process descriptor, and all its threads are blocked, and marked for deletion.
479 * Therefore the exec syscall does not return to the calling thread in case of success.
480 * This function build an exec_info_t structure containing the new process arguments,
481 * as defined by the <arv> argument, and the new process environment variables,
482 * as defined by the <envp>  argument.
483 * TODO : the <argv> and <envp> arguments are not supported yet (both must be NULL).
484 ******************************************************************************************
485 * @ filename : string pointer on .elf filename (pointer in user space)
486 * @ argv     : array of strings on process arguments (pointers in user space)
487 * @ envp     : array of strings on environment variables (pointers in user space)
488 * @ does not return if success / returns -1 if failure.
489 *****************************************************************************************/
490int sys_exec( char  * filename,
491              char ** argv,
492              char ** envp );
493
494/******************************************************************************************
495 * [38] This function  returns in the <stat> structure, defined in the "shared_syscalls.h"
496 * file, various informations on the file/directory identified by the <pathname> argument.
497 ******************************************************************************************
498 * @ pathname  : user pointer on file pathname.
499 * @ stat      : user pointer on the stat structure.
500 * @ returns O if success / returns -1 if failure.
501 *****************************************************************************************/
502int sys_stat( const char  * pathname,
503              struct stat * stat );
504
505/******************************************************************************************
506 * [39] This blocking function waits a change of a child process state, that can be:
507 * - a termination of child following a process_make_exit().
508 * - a termination of child following a process_make_kill().
509 * - a blocking of child following a SIGSTOP signal.
510 * In case of a multi-thread process, this function must be called by the main thread
511 * runningin the reference cluster.
512 * When a change has been observed, it returns the PID of the child process, and stores
513 * in the <status> argument relevant information on the child state change.
514 * The following macros can be used to extract information from status:
515 * - WIFEXITED(status)   : is true if the child process terminated with an exit().
516 * - WIFSIGNALED(status) : is true if the child process killed by a signal.
517 * - WIFSTOPPED(status)  : is true if the child process is stopped by a signal.
518 * - WEXITSTATUS(status) : returns the low-order 8 bits of the exit() argument.
519 * If a parent process terminates without waiting for all child processes to terminate,
520 * the remaining child processes are attached to the init process.
521 * WARNING: negative values for the <pid> argument are not supported.
522 ******************************************************************************************
523 * @ searched_pid : searched child process identifier.
524 * @ status       : [out] child termination status.
525 * @ return child PID if success / return -1 if searched PID not found.
526 *****************************************************************************************/
527int sys_wait( uint32_t * status );
528
529/******************************************************************************************
530 * [40] This function returns the hardware platform parameters.
531 ******************************************************************************************
532 * @ x_size   : [out] number of clusters in a row.
533 * @ y_size   : [out] number of clusters in a column.
534 * @ y_width  : [out] number of bits in Y field for CXY.
535 * @ ncores   : [out] number of cores per cluster.
536 * @ return 0 if success / return -1 if illegal arguments
537 *****************************************************************************************/
538int sys_get_config( uint32_t * x_size,
539                    uint32_t * y_size,
540                    uint32_t * y_width,
541                    uint32_t * ncores );
542
543/******************************************************************************************
544 * [41] This function returns the calling core cluster and local index.
545 ******************************************************************************************
546 * @ cxy      : [out] cluster identifier (fixed format)
547 * @ lid      : [out] core local index in cluster.
548 * @ return 0 if success / return -1 if illegal arguments
549 *****************************************************************************************/
550int sys_get_core( uint32_t * cxy,
551                  uint32_t * lid );
552
553/******************************************************************************************
554 * [42] This function returns in a 64 bits user buffer the calling core cycles count.
555 * It uses both the hardware register and the core descriptor cycles count to take
556 * into account a possible harware register overflow  in 32 bits architectures.
557 ******************************************************************************************
558 * cycle    : [out] address of buffer in user space.
559 * @ return 0 if success / return -1 if illegal arguments
560 *****************************************************************************************/
561int sys_get_cycle( uint64_t * cycle );
562
563/******************************************************************************************
564 * [43] This debug function displays on the kernel terminal TXT0 an user defined string,
565 * or the current state of a kernel structure, identified by the <type> argument.
566 * The <arg0> and <arg1> arguments depends on the structure type:
567 * - DISPLAY_STRING          : an user defined string
568 * - DISPLAY_VMM             : VSL and GPT for a process identified by <pid>.
569 * - DISPLAY_SCHED           : all threads allocated to a scheduler <cxy> & <lid>.
570 * - DISPLAY_CLUSTER_PROCESS : all processes registered in a cluster identified by <cxy>. 
571 * - DISPLAY_TXT_PROCESS     : all processes registered in a cluster identified by <cxy>. 
572 * - DISPLAY_VFS             : all files registered in the VFS cache.
573 * - DISPLAY_CHDEV           : all registered channel devices.
574 ******************************************************************************************
575 * type      : [in] type of display
576 * arg0      : [in] type dependant argument.
577 * arg1      : [in] type dependant argument.
578 * @ return 0 if success / return -1 if illegal arguments
579 *****************************************************************************************/
580int sys_display( reg_t  type,
581                 reg_t  arg0,
582                 reg_t  arg1 );
583
584/******************************************************************************************
585 * [45] This function block the calling thread on the THREAD_BLOCKED_GLOBAL condition,
586 * and deschedule.
587 ******************************************************************************************
588 * @ return 0 if success / returns -1 if failure.
589 *****************************************************************************************/
590int sys_thread_sleep();
591
592/******************************************************************************************
593 * [46] This function unblock the thread identified by its <trdid> from the
594 * THREAD_BLOCKED_GLOBAL condition.
595 ******************************************************************************************
596 * @ trdid  : target thread identifier.
597 * @ return 0 if success / return -1 if failure.
598 *****************************************************************************************/
599int sys_thread_wakeup();
600
601/******************************************************************************************
602 * [47] This debug function is used to activate / desactivate the context switches trace
603 * for a core identified by the <cxy> and <lid> arguments.
604 * It can be called by any other thread in the same process.
605 ******************************************************************************************
606 * @ active     : activate trace if true / desactivate trace if false.
607 * @ cxy        : cluster identifier.
608 * @ lid        : core local index.
609 * @ returns O if success / returns -1 if failure.
610 *****************************************************************************************/
611int sys_trace( bool_t   active,
612               cxy_t    cxy, 
613               lid_t    lid );
614
615/******************************************************************************************
616 * [48] This function gives the process identified by the <pid> argument
617 * the exclusive ownership of its TXT_TX terminal (put it in foreground).
618 ******************************************************************************************
619 * @ pid    : process identifier.
620 * @ return 0 if success / return -1 if failure.
621 *****************************************************************************************/
622int sys_fg( pid_t   pid );
623
624int sys_place( uint32_t cxy,
625               uint32_t lid );
626
627#endif  // _SYSCALLS_H_
Note: See TracBrowser for help on using the repository browser.