source: trunk/kernel/syscalls/syscalls.h @ 619

Last change on this file since 619 was 619, checked in by alain, 5 years ago

1) Fix a bug in KSH : after the "load" command,

the [ksh] prompt is now printed after completion
of the loaded application.

2) Fix a bug in vmm_handle_cow() : the copy-on-write

use now a hal_remote_memcpy() to replicate the page content.


File size: 40.0 KB
Line 
1/*
2 * syscalls.h - Kernel side services for syscall handling.
3 *
4 * Author     Alain Greiner (2016,2017,2018)
5 *
6 * Copyright (c) UPMC Sorbonne Universites
7 *
8 * This file is part of ALMOS-MKH.
9 *
10 * ALMOS-MKH is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2.0 of the License.
13 *
14 * ALMOS-MKH is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with ALMOS-MKH; if not, write to the Free Software Foundation,
21 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22 */
23
24#ifndef _SYSCALLS_H_
25#define _SYSCALLS_H_
26
27#include <hal_kernel_types.h>
28#include <shared_syscalls.h>
29
30/**   Forward declarations  *****/
31
32struct thread_s;                  // defined in thread.h
33struct pthread_attr_s;            // defined in thread.h
34struct vfs_stat_s;                // defined in vfs.h
35struct vfs_dirent_s;              // defined in vfs.h
36struct mmap_attr_s;               // defined in vmm.h
37
38/******************************************************************************************
39 * [0] This function terminates the execution of the calling user thread,
40 * and makes the exit_value pointer available to any successful pthread_join() with the
41 * terminating thread.
42 * It actually set the THREAD_SIG_EXIT signal, set the THREAD_BLOCKED_GLOBAL bit in the
43 * thread descriptor and deschedule.
44 * The thread will be detached from its process, and the memory allocated to the thread
45 * descriptor will be released later by the scheduler.
46 ******************************************************************************************
47 * @ exit_vallue  : pointer to be returned to joining thread if thread is attached.
48 * @ return 0 if success / return -1 if all locks not released or illegal argument.
49 *****************************************************************************************/
50int sys_thread_exit( void * exit_value );
51
52/******************************************************************************************
53 * [1] This function calls the scheduler for the core running the calling thread.
54 ******************************************************************************************
55 * @ x_size   : [out] number of clusters in a row.
56 * @ y_size   : [out] number of clusters in a column.
57 * @ ncores   : [out] number of cores per cluster.
58 * @ return always 0.
59 *****************************************************************************************/
60int sys_thread_yield( void );
61
62/******************************************************************************************
63 * [2] This function creates a new user thread. The <user_attr> argument is a pointer
64 * on astructure containing the thread attributes, defined in thread.h file.
65 ******************************************************************************************
66 * @ trdid_ptr   : [out] pointer on buffer for created thread trdid.
67 * @ user_attr   : [in]  pointer on thread attributes structure.
68 * @ start_func  : [in]  pointer on start function.
69 * @ start_args  : [in]  pointer on start function arguments.
70 * @ return 0 if success / return -1 if failure.
71 *****************************************************************************************/
72int sys_thread_create( trdid_t               * trdid_ptr,
73                       struct pthread_attr_s * user_attr,
74                       void                  * start_func,
75                       void                  * start_args );
76
77/******************************************************************************************
78 * [3] This blocking function suspend execution of the calling thread until completion
79 * of another target thread identified by the <trdid> argument.
80 * The target thread must be joinable (running in ATTACHED mode), and must be different
81 * from the calling thread.
82 * If the <exit_value> argument is not NULL, the value passed to pthread_exit() by the
83 * target thread is stored in the location referenced by exit_value.
84 ******************************************************************************************
85 * @ trdid     : [in]  target thread identifier.
86 * @ thread    : [out] buffer for exit_value returned by target thread.
87 * @ return 0 if success / return -1 if failure.
88 *****************************************************************************************/
89int sys_thread_join( trdid_t    trdid,
90                     void    ** exit_value );
91
92/******************************************************************************************
93 * [4] This function detach a joinable thread.
94 ******************************************************************************************
95 * @ trdid   : thread identifier.
96 * @ return 0 if success / return -1 if failure.
97 *****************************************************************************************/
98int sys_thread_detach( trdid_t  trdid );
99
100/******************************************************************************************
101 * [5] This function requests a target thread identified by its <trdid> argument
102 * to be cancelled. It calls the thread_kill() function to block the target thread
103 * on the THREAD_BLOCKED_GLOBAL condition, and to set the THREAD_FLAG_REQ_DELETE.
104 * The thread will be detached from its process, and the memory allocated to the thread
105 * descriptor will be released by the scheduler at the next scheduling point.
106 ******************************************************************************************
107 * @ trdid   : thread identifier.
108 * @ return 0 if success / return -1 if illegal argument.
109 *****************************************************************************************/
110int sys_thread_cancel( trdid_t  trdid );
111
112/******************************************************************************************
113 * [6] This function implement all operations on a POSIX unnamed semaphore,
114 * that can be shared by threads running in different clusters.
115 * The kernel structure representing a remote semaphore is in the remote_sem.h file,
116 * and the code implementing the operations is in the remore_sem.c file.
117 ******************************************************************************************
118 * @ vaddr         : semaphore virtual address in user space == identifier.
119 * @ operation     : SEM_INIT / SEM_DESTROY / SEM_GETVALUE / SEM_POST / SEM_WAIT.
120 * @ init_value    : initial semaphore value.
121 * @ current_value : pointer on buffer for current semaphore value.
122 * @ return 0 if success / return -1 if failure.
123 *****************************************************************************************/
124int sys_sem( void       * vaddr,
125             uint32_t     operation,
126             uint32_t     init_value,
127             uint32_t   * current_value );
128
129/******************************************************************************************
130 * [7] This function implement all operations on a POSIX condition variable.
131 * The kernel structure representing a condvar is defined in the remote_condvar.h file,
132 * The code implementing the operations is defined in the remote_condvar.c file.
133 ******************************************************************************************
134 * @ vaddr     : condvar virtual address in user space == identifier.
135 * @ operation : operation type (see below).
136 * @ attr      : mutex virtual address in user space == identifier.
137 * @ return 0 if success / return -1 if failure.
138 *****************************************************************************************/
139int sys_condvar( void     * condvar,
140                 uint32_t   operation,
141                 void     * mutex );
142
143/******************************************************************************************
144 * [8] This function implement all operations on a POSIX barrier.
145 * The kernel structure representing a barrier is defined in the remote_barrier.h file.
146 * The code implementting the operations is defined in the remote_barrier.c file.
147 ******************************************************************************************
148 * @ vaddr     : barrier address in user space == identifier.
149 * @ operation : BARRIER_INIT / BARRIER_DESTROY / BARRIER_WAIT.
150 * @ count     : number of expected threads (only used by BARRIER_INIT).
151 * @ attr      : barrier attributes address in user space (only used by BARRIER_INIT).
152 * @ return 0 if success / return -1 if failure.
153 *****************************************************************************************/
154int sys_barrier( intptr_t   vaddr,
155                 uint32_t   operation,
156                 uint32_t   count,
157                 intptr_t   attr );
158
159/******************************************************************************************
160 * [9] This function implement all operations on a POSIX mutex.
161 * The kernel structure representing a barrier is defined in the remote_barrier.h file.
162 * The code implementting the operations is defined in the remote_barrier.c file.
163 ******************************************************************************************
164 * @ vaddr     : mutex virtual address in user space == identifier.
165 * @ operation : MUTEX_INIT / MUTEX_DESTROY / MUTEX_LOCK / MUTEX_UNLOCK
166 * @ attr      : mutex attributes (non supported yet => must be 0).
167 * @ return 0 if success / return -1 if failure.
168 *****************************************************************************************/
169int sys_mutex( void     * vaddr,
170               uint32_t   operation,
171               uint32_t   count );
172
173/******************************************************************************************
174 * [10] This function causes the file named <old> to be renamed as <new>.
175 * If new exists, it is first removed.  Both old and new must be of the same type (both
176 * must be either directories or non-directories) and must reside on the same file system.
177 * It guarantees that an instance of <new> will always exist, even if the system should
178 * crash in the middle of the operation.
179 ******************************************************************************************
180 * @ old      : old file name.
181 * @ new      : new file name.
182 * @ return 0 if success / return -1 if failure.
183 *****************************************************************************************/
184int sys_rename( char *old,
185                char *new );
186
187/******************************************************************************************
188 * [11] This function remove an existing mapping defined by the <addr> and <size>
189 * arguments in user space.
190 ******************************************************************************************
191 * @ addr  : base address in user space.
192 * # size  : number of bytes.
193 * @ return 0 if success / return -1 if failure.
194 *****************************************************************************************/
195int sys_munmap( void     * addr,
196                uint32_t   size );
197
198/******************************************************************************************
199 * [12] This function open or create an open file descriptor.
200 ******************************************************************************************
201 * @ pathname   : pathname (can be relative or absolute).
202 * @ flags      : bit vector attributes (see in shared_fcntl.h file)
203 * @ mode       : access rights.
204 * @ return file descriptor index in fd_array if success / return -1 if failure.
205 *****************************************************************************************/
206int sys_open( char       * pathname,
207              uint32_t     flags,
208              uint32_t     mode );
209
210/******************************************************************************************
211 * [13] This function map physical memory (or a file) in the calling thread virtual space.
212 * The <attr> argument is a pointer on a structure for arguments (see shared_syscalls.h).
213 * The user defined virtual address (MAP_FIXED flag) is not supported.
214 * TODO : the access rights checking is not implemented yet [AG]
215 * TODO : the Copy on Write for MAP_PRIVATE is not implemented yet [AG]
216 ******************************************************************************************
217 * @ attr       : pointer on attributes structure.
218 * @ return 0 if success / return -1 if failure.
219 *****************************************************************************************/
220int sys_mmap( mmap_attr_t * attr );
221
222/******************************************************************************************
223 * [14] This function read bytes from an open file identified by its file descriptor.
224 * The file can be a regular file or character oriented device.
225 * IRQs are enabled during this system call.
226 ******************************************************************************************
227 * @ file_id  : open file index in fd_array.
228 * @ buf      : buffer virtual address in user space.
229 * @ count    : number of bytes.
230 * @ return number of bytes actually read if success / returns -1 if failure.
231 *****************************************************************************************/
232int sys_read( uint32_t   file_id,
233              void     * buf,
234              uint32_t   count );
235
236/******************************************************************************************
237 * [15] This function writes bytes to an open file identified by its file descriptor.
238 * The file can be a regular file or character oriented device.
239 * IRQs are enabled during this system call.
240 ******************************************************************************************
241 * @ file_id  : open file index in fd_array.
242 * @ buf      : buffer virtual address in user space.
243 * @ count    : number of bytes.
244 * @ return number of bytes actually written if success / returns -1 if failure.
245 *****************************************************************************************/
246int sys_write( uint32_t   file_id,
247               void     * buf,
248               uint32_t   count );
249
250/******************************************************************************************
251 * [16] This function repositions the offset of the file descriptor identified by <file_id>,
252 * according to the operation type defined by the <whence> argument.
253 ******************************************************************************************
254 * @ file_id  : open file index in fd_array.
255 * @ offset   : used to compute new offset value.
256 * @ whence   : operation type (see below).
257 * @ return 0 if success / returns -1 if failure.
258 *****************************************************************************************/
259int sys_lseek( xptr_t    file_id,
260               uint32_t  offset,
261               uint32_t  whence );
262
263/******************************************************************************************
264 * [17] This function release the memory allocated for the file descriptor identified by
265 * the <file_id> argument, and remove the fd array_entry in all copies of the process
266 * descriptor.
267 ******************************************************************************************
268  file_id   : file descriptor index in fd_array.
269 * @ return 0 if success / returns -1 if failure.
270 *****************************************************************************************/
271int sys_close( uint32_t file_id );
272
273/******************************************************************************************
274 * [18] This function removes a directory entry identified by the <pathname> from the
275 * directory, and decrement the link count of the file referenced by the link.
276 * If the link count reduces to zero, and no process has the file open, then all resources
277 * associated with the file are reclaimed.  If one or more process have the file open when
278 * the last link is removed, the link is removed, but the removal of the file is delayed
279 * until all references to it have been closed.
280 ******************************************************************************************
281 * @ pathname   : pathname (can be relative or absolute).
282 * @ return 0 if success / returns -1 if failure.
283 *****************************************************************************************/
284int sys_unlink( char * pathname );
285
286/******************************************************************************************
287 * [19] This function creates in the calling thread cluster an unnamed pipe, and two
288 * (read and write) file descriptors.
289 * TODO not implemented yet [AG]
290 ******************************************************************************************
291 * @ file_id[0] : [out] read only file descriptor index.
292 * @ file_id[1] : [out] write only file descriptor index.
293 * @ return 0 if success / return -1 if failure.
294 *****************************************************************************************/
295int sys_pipe( uint32_t file_id[2] );
296
297/******************************************************************************************
298 * [20] This function change the current working directory in reference process descriptor.
299 ******************************************************************************************
300 * @ pathname   : pathname (can be relative or absolute).
301 * @ return 0 if success / returns -1 if failure.
302 *****************************************************************************************/
303int sys_chdir( char * pathname );
304
305/******************************************************************************************
306 * [21] This function implements the "mkdir" system call, creating a new directory in
307 * the file system, as defined by the <pathname> argument, with the access permission
308 * defined by the <rights> argument. All nodes but the last in the pathname must exist.
309 * It can be called by any thread running in any cluster.
310 ******************************************************************************************
311 * @ pathname  : pathname defining the new directory location in file system.
312 * @ rights    : access rights (non used yet).
313 * @ return 0 if success / return -1 if failure.
314 *****************************************************************************************/
315int sys_mkdir( char     * pathname,
316               uint32_t   rights );
317
318/******************************************************************************************
319 * [22] This function creates a named FIFO file in the calling thread cluster.
320 * The associated read and write file descriptors mut be be  explicitely created
321 * using the sys_open() function.
322 ******************************************************************************************
323 * @ pathname   : pathname (can be relative or absolute).
324 * @ mode       : access rights (as defined in chmod).
325 * @ return 0 if success / returns -1 if failure.
326 *****************************************************************************************/
327int sys_mkfifo( char     * pathname,
328                uint32_t   mode );
329
330/******************************************************************************************
331 * [23] This function open a directory, that must exist in the file system, returning
332 * a DIR pointer on the dirent array in user space.
333 ******************************************************************************************
334 * @ pathname   : [in]  pathname (can be relative or absolute).
335 * @ dirp       : [out] buffer for pointer on user directory (DIR).
336 * @ return 0 if success / returns -1 if failure.
337 *****************************************************************************************/
338int sys_opendir( char * pathname,
339                 DIR ** dirp );
340
341/******************************************************************************************
342 * [24] This function returns an user pointer on the dirent structure describing the
343 * next directory entry in the directory identified by the <dirp> argument.
344 ******************************************************************************************
345 * @ dirp     : [in]  user pointer on dirent array identifying the open directory.
346 * @ buffer   : [out] pointer on user buffer for a pointer on dirent in user space.
347 * @ return O if success / returns -1 if failure.
348 *****************************************************************************************/
349int sys_readdir( DIR            * dirp,
350                 struct dirent ** buffer );
351
352/******************************************************************************************
353 * [25] This function closes the directory identified by the <dirp> argument, and releases
354 * all structures associated with the <dirp> pointer.
355 ******************************************************************************************
356 * @ dirp     : [in] user pointer on dirent array identifying the open directory.
357 * @ return 0 if success / returns -1 if failure.
358 *****************************************************************************************/
359int sys_closedir( DIR * dirp );
360
361/******************************************************************************************
362 * [26] This function returns the pathname of the current working directory.
363 ******************************************************************************************
364 * buf     : buffer addres in user space.
365 * nbytes  : user buffer size in bytes.
366 * @ return 0 if success / returns -1 if failure.
367 *****************************************************************************************/
368int sys_getcwd( char     * buf,
369                uint32_t   nbytes );
370
371/******************************************************************************************
372 * [27] This function tests whether a given file descriptor dentified by the <file_id>
373 * argument is an open file descriptor referring to a terminal.
374 ******************************************************************************************
375 * @ file_id   : file descriptor index
376 * @ return 1 if it is a TXT device / return 0 if it is not a TXT device.
377 *****************************************************************************************/
378int sys_isatty( uint32_t file_id );
379
380/******************************************************************************************
381 * [28] This function forces the calling thread to sleep, for a fixed number of cycles.
382 ******************************************************************************************
383 * cycles   : number of cycles.
384 *****************************************************************************************/
385int sys_alarm( uint32_t cycles );
386
387/******************************************************************************************
388 * [29] This function removes a directory file whose name is given by <pathname>.
389 * The directory must not have any entries other than `.' and `..'.
390 ******************************************************************************************
391 * @ pathname   : pathname (can be relative or absolute).
392 * @ return 0 if success / returns -1 if failure.
393 *****************************************************************************************/
394int sys_rmdir( char * pathname );
395
396/******************************************************************************************
397 * [30] This function implement the operations related to User Thread Local Storage.
398 * It is actually implemented as an uint32_t variable in the thread descriptor.
399 ******************************************************************************************
400 * @ operation  : UTLS operation type as defined below.
401 * @ value      : argument value for the UTLS_SET operation.
402 * @ return value for the UTLS_GET and UTLS_GET_ERRNO / return -1 if failure.
403 *****************************************************************************************/
404int sys_utls( uint32_t operation,
405              uint32_t value );
406
407/******************************************************************************************
408 * [31] This function change the acces rights for the file/dir identified by the
409 * pathname argument.
410 ******************************************************************************************
411 * @ pathname   : pathname (can be relative or absolute).
412 * @ rights     : acces rights.
413 * @ return 0 if success / returns -1 if failure.
414 *****************************************************************************************/
415int sys_chmod( char       * pathname,
416               uint32_t     rights );
417
418/******************************************************************************************
419 * [32] This function associate a specific signal handler to a given signal type.
420 * The handlers for the SIGKILL and SIGSTOP signals cannot be redefined.
421 ******************************************************************************************
422 * @ sig_id    : index defining signal type (from 1 to 31).
423 * @ handler   : pointer on fonction implementing the specific handler.
424 * @ return 0 if success / returns -1 if failure.
425 *****************************************************************************************/
426int sys_signal( uint32_t   sig_id,
427                void     * handler );
428
429/******************************************************************************************
430 * [33] This function returns in the structure <tv>, defined in the time.h file,
431 * the current time (in seconds & micro-seconds).
432 * It is computed from the calling core descriptor.
433 * The timezone is not supported.
434 ******************************************************************************************
435 * @ tv      : pointer on the timeval structure.
436 * @ tz      : pointer on the timezone structure : must be NULL.       
437 * @ return 0 if success / returns -1 if failure.
438 *****************************************************************************************/
439int sys_timeofday( struct timeval  * tv,
440                   struct timezone * tz );
441
442/******************************************************************************************
443 * [34] This function implements the "kill" system call on the kernel side.
444 * It register the signal defined by the <sig_id> argument in all thread descriptors
445 * of a target process identified by the <pid> argument. This is done in all clusters
446 * containing threads for the target process.
447 * It can be executed by any thread running in any cluster, as this function uses
448 * remote access to traverse the list of process copies stored in the owner cluster,
449 * and the RPC_SIGNAL_RISE to signal the remote threads.
450 * This function does nothing for (sig_id == 0). This can be used to check process pid.
451 * TODO : This first implementation supports only SIGKILL / SIGSTOP / SIGCONT values.
452 ******************************************************************************************
453 * @ pid      : target process identifier.
454 * @ sig_id   : index defining the signal type.
455 * @ return 0 if success / returns -1 if failure.
456 *****************************************************************************************/
457int sys_kill( pid_t    pid,
458              uint32_t sig_id );
459
460/******************************************************************************************
461 * [35] This function implements the "getpid" system call on the kernel side.
462 ******************************************************************************************
463 * @ returns the process PID for the calling thread.
464 *****************************************************************************************/
465int sys_getpid( void );
466
467/******************************************************************************************
468 * [36] This function implement the "fork" system call on the kernel side.
469 * The calling process descriptor (parent process), and the associated thread descriptor
470 * are replicated in a - likely - remote cluster, that becomes the child process owner.
471 * The child process get a new PID, and is linked to the parent PID. The child process
472 * inherit from its parent the memory image, and all open files (including the TXT).
473 * The child process becomes the TXT terminal owner.
474 * The target cluster depends on the "fork_user" flag and "fork_cxy" variable that can be
475 * stored in the calling thread descriptor by the specific fork_place() system call.
476 * If not, the kernel function makes a query to the DQDT to select the target cluster.
477 ******************************************************************************************
478 * @ if success, returns child process PID to parent, and return O to child.
479 * @ if failure, returns -1 to parent / no child process is created.
480 *****************************************************************************************/
481int sys_fork( void );
482
483/******************************************************************************************
484 * [37] This function implement the "exec" system call on the kernel side.
485 * It creates, in the same cluster as the calling thread, a new process descriptor,
486 * and a new associated main thread descriptor, executing a new memory image defined
487 * by the <filename> argument. This new process inherit from the old process the PID
488 * and the PPID, as well as all open files (including the TXT).
489 * The old process descriptor, and all its threads are blocked, and marked for deletion.
490 * Therefore the exec syscall does not return to the calling thread in case of success.
491 * This function build an exec_info_t structure containing the new process arguments,
492 * as defined by the <arv> argument, and the new process environment variables,
493 * as defined by the <envp>  argument.
494 * TODO : the <argv> and <envp> arguments are not supported yet (both must be NULL).
495 ******************************************************************************************
496 * @ filename : string pointer on .elf filename (pointer in user space)
497 * @ argv     : array of strings on process arguments (pointers in user space)
498 * @ envp     : array of strings on environment variables (pointers in user space)
499 * @ does not return if success / returns -1 if failure.
500 *****************************************************************************************/
501int sys_exec( char  * filename,
502              char ** argv,
503              char ** envp );
504
505/******************************************************************************************
506 * [38] This function  returns in the <stat> structure, defined in the "shared_syscalls.h"
507 * file, various informations on the file/directory identified by the <pathname> argument.
508 * TODO only the <st_ino>, <st_mode>,<st_uid>,<st_gid>,<st_size> are set.
509 ******************************************************************************************
510 * @ pathname  : user pointer on file pathname.
511 * @ stat      : user pointer on the stat structure.
512 * @ returns O if success / returns -1 if failure.
513 *****************************************************************************************/
514int sys_stat( char        * pathname,
515              struct stat * stat );
516
517/******************************************************************************************
518 * [39] This blocking function waits a change of a child process state, that can be:
519 * - a termination of child following a process_make_exit().
520 * - a termination of child following a process_make_kill().
521 * - a blocking of child following a SIGSTOP signal.
522 * In case of a multi-thread process, this function must be called by the main thread
523 * runningin the reference cluster.
524 * When a change has been observed, it returns the PID of the child process, and stores
525 * in the <status> argument relevant information on the child state change.
526 * The following macros can be used to extract information from status:
527 * - WIFEXITED(status)   : is true if the child process terminated with an exit().
528 * - WIFSIGNALED(status) : is true if the child process killed by a signal.
529 * - WIFSTOPPED(status)  : is true if the child process is stopped by a signal.
530 * - WEXITSTATUS(status) : returns the low-order 8 bits of the exit() argument.
531 * If a parent process terminates without waiting for all child processes to terminate,
532 * the remaining child processes are attached to the init process.
533 * WARNING: negative values for the <pid> argument are not supported.
534 ******************************************************************************************
535 * @ searched_pid : searched child process identifier.
536 * @ status       : [out] child termination status.
537 * @ return child PID if success / return -1 if searched PID not found.
538 *****************************************************************************************/
539int sys_wait( uint32_t * status );
540
541/******************************************************************************************
542 * [40] This function implement the non-standard get_config() syscall.
543 * It returns in <x_size>, <y_size>, <ncores> the hardware platform parameters.
544 ******************************************************************************************
545 * @ x_size   : [out] number of clusters in a row.
546 * @ y_size   : [out] number of clusters in a column.
547 * @ ncores   : [out] number of cores per cluster.
548 * @ return 0 if success / return -1 if illegal arguments
549 *****************************************************************************************/
550int sys_get_config( uint32_t * x_size,
551                    uint32_t * y_size,
552                    uint32_t * ncores );
553
554/******************************************************************************************
555 * [41] This function implements the non-standard get_core() syscall.
556 * It returns in <cxy> and <lid> the calling core cluster and local index.
557 ******************************************************************************************
558 * @ cxy      : [out] cluster identifier (fixed format)
559 * @ lid      : [out] core local index in cluster.
560 * @ return 0 if success / return -1 if illegal arguments
561 *****************************************************************************************/
562int sys_get_core( uint32_t * cxy,
563                  uint32_t * lid );
564
565/******************************************************************************************
566 * [42] This function implements the non-standard get_cycle() syscall.
567 * It returns in a 64 bits user buffer the calling core cycles count.
568 * It uses both the hardware register and the core descriptor cycles count to take
569 * into account a possible harware register overflow  in 32 bits architectures.
570 ******************************************************************************************
571 * cycle    : [out] address of buffer in user space.
572 * @ return 0 if success / return -1 if illegal arguments
573 *****************************************************************************************/
574int sys_get_cycle( uint64_t * cycle );
575
576/******************************************************************************************
577 * [43] This debug function displays on the kernel terminal TXT0 an user defined string,
578 * or the current state of a kernel structure, identified by the <type> argument.
579 * The <arg0>, <arg1>, and <arg2> arguments depends on the structure type:
580 * - DISPLAY_STRING          : an user defined string
581 * - DISPLAY_VMM             : VSL and GPT for a process identified by <pid>.
582 * - DISPLAY_SCHED           : all threads allocated to a scheduler <cxy> & <lid>.
583 * - DISPLAY_CLUSTER_PROCESS : all processes registered in a cluster identified by <cxy>. 
584 * - DISPLAY_TXT_PROCESS     : all processes registered in a cluster identified by <cxy>. 
585 * - DISPLAY_VFS             : all files registered in the VFS cache.
586 * - DISPLAY_CHDEV           : all registered channel devices.
587 * - DISPLAY_DQDT            : all DQDT nodes curren values.
588 * - DISPLAY_BUSYLOCKS       : all busylocks taken by one thread.
589 * - DISPLAY_MAPPER          : one page of a given mapper.
590 ******************************************************************************************
591 * type      : [in] type of display
592 * arg0      : [in] type dependant argument.
593 * arg1      : [in] type dependant argument.
594 * arg2      : [in] type dependant argument.
595 * @ return 0 if success / return -1 if illegal arguments
596 *****************************************************************************************/
597int sys_display( reg_t  type,
598                 reg_t  arg0,
599                 reg_t  arg1,
600                 reg_t  arg2 );
601
602/******************************************************************************************
603 * [44] This function implements the non-standard place_fork() syscall.
604 * It can be used to specify the target cluster <cxy> for a new process created
605 * by a subsequent fork() syscall.
606 * WARNING: it must be called before each fork() syscall, as the placement specification
607 *          is reset by the fork syscall.
608 ******************************************************************************************
609 * @ cxy    : cluster identifier.
610 * @ return 0 if success / return -1 if failure.
611 *****************************************************************************************/
612int sys_place_fork( uint32_t cxy );
613
614/******************************************************************************************
615 * [45] This function block the calling thread on the THREAD_BLOCKED_GLOBAL condition,
616 * and deschedule.
617 ******************************************************************************************
618 * @ return 0 if success / returns -1 if failure.
619 *****************************************************************************************/
620int sys_thread_sleep( void );
621
622/******************************************************************************************
623 * [46] This function unblock the thread identified by its <trdid> from the
624 * THREAD_BLOCKED_GLOBAL condition.
625 ******************************************************************************************
626 * @ trdid  : target thread identifier.
627 * @ return 0 if success / return -1 if failure.
628 *****************************************************************************************/
629int sys_thread_wakeup( trdid_t trdid );
630
631/******************************************************************************************
632 * [47] This debug function is used to activate / desactivate the context switches trace
633 * for a core identified by the <cxy> and <lid> arguments.
634 * It can be called by any other thread in the same process.
635 ******************************************************************************************
636 * @ active     : activate trace if true / desactivate trace if false.
637 * @ cxy        : cluster identifier.
638 * @ lid        : core local index.
639 * @ returns O if success / returns -1 if failure.
640 *****************************************************************************************/
641int sys_trace( bool_t   active,
642               cxy_t    cxy, 
643               lid_t    lid );
644
645/******************************************************************************************
646 * [48] This function gives the process identified by the <pid> argument
647 * the exclusive ownership of its TXT_TX terminal (put it in foreground).
648 ******************************************************************************************
649 * @ pid    : process identifier.
650 * @ return 0 if success / return -1 if failure.
651 *****************************************************************************************/
652int sys_fg( pid_t   pid );
653
654/******************************************************************************************
655 * [49] This function returns a non-zero value in the <is_fg> buffer when the process
656 * identified by the <pid> argument is the current TXT owner.
657 ******************************************************************************************
658 * @ pid      : process identifier.
659 * @ is_fg    : pointer on buffer.
660 * @ return 0 if success / return -1 if failure.
661 *****************************************************************************************/
662int sys_is_fg( pid_t      pid,
663               uint32_t * is_fg );
664
665/******************************************************************************************
666 * [50] This function implements the exit system call terminating a POSIX process.
667 * It can be called by any thread running in any cluster.
668 * It uses both remote accesses to access the owner process descriptor, and the
669 * RPC_PROCESS_SIGACTION to delete remote process and thread descriptors.
670 * In the present implementation, this function implements actually the _exit():
671 * - it does not flush open output streams.
672 * - it does not close open streams.
673 ******************************************************************************************
674 * @ status   : terminaison status.
675 *****************************************************************************************/
676int sys_exit( uint32_t status );
677
678#endif  // _SYSCALLS_H_
Note: See TracBrowser for help on using the repository browser.