source: trunk/libs/newlib/src/config/acx.m4 @ 529

Last change on this file since 529 was 444, checked in by satin@…, 6 years ago

add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc

File size: 19.8 KB
Line 
1# Autoconf M4 include file defining utility macros for complex Canadian
2# cross builds.
3
4dnl ####
5dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
6dnl # $build_alias or canonical $build if blank.
7dnl # Used when we would use $build_alias, but empty is not OK.
8AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_BUILD],
9[AC_REQUIRE([AC_CANONICAL_BUILD]) []dnl
10case ${build_alias} in
11  "") build_noncanonical=${build} ;;
12  *) build_noncanonical=${build_alias} ;;
13esac
14]) []dnl # _GCC_TOPLEV_NONCANONICAL_BUILD
15
16dnl ####
17dnl # _GCC_TOPLEV_NONCANONICAL_HOST
18dnl # $host_alias, or $build_noncanonical if blank.
19dnl # Used when we would use $host_alias, but empty is not OK.
20AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_HOST],
21[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
22case ${host_alias} in
23  "") host_noncanonical=${build_noncanonical} ;;
24  *) host_noncanonical=${host_alias} ;;
25esac
26]) []dnl # _GCC_TOPLEV_NONCANONICAL_HOST
27
28dnl ####
29dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
30dnl # $target_alias or $host_noncanonical if blank.
31dnl # Used when we would use $target_alias, but empty is not OK.
32AC_DEFUN([_GCC_TOPLEV_NONCANONICAL_TARGET],
33[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
34case ${target_alias} in
35  "") target_noncanonical=${host_noncanonical} ;;
36  *) target_noncanonical=${target_alias} ;;
37esac
38]) []dnl # _GCC_TOPLEV_NONCANONICAL_TARGET
39
40dnl ####
41dnl # ACX_NONCANONICAL_BUILD
42dnl # Like underscored version, but AC_SUBST's.
43AC_DEFUN([ACX_NONCANONICAL_BUILD],
44[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
45AC_SUBST(build_noncanonical)
46]) []dnl # ACX_NONCANONICAL_BUILD
47
48dnl ####
49dnl # ACX_NONCANONICAL_HOST
50dnl # Like underscored version, but AC_SUBST's.
51AC_DEFUN([ACX_NONCANONICAL_HOST],
52[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_HOST]) []dnl
53AC_SUBST(host_noncanonical)
54]) []dnl # ACX_NONCANONICAL_HOST
55
56dnl ####
57dnl # ACX_NONCANONICAL_TARGET
58dnl # Like underscored version, but AC_SUBST's.
59AC_DEFUN([ACX_NONCANONICAL_TARGET],
60[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
61AC_SUBST(target_noncanonical)
62]) []dnl # ACX_NONCANONICAL_TARGET
63
64dnl ####
65dnl # GCC_TOPLEV_SUBDIRS
66dnl # GCC & friends build 'build', 'host', and 'target' tools.  These must
67dnl # be separated into three well-known subdirectories of the build directory:
68dnl # build_subdir, host_subdir, and target_subdir.  The values are determined
69dnl # here so that they can (theoretically) be changed in the future.  They
70dnl # were previously reproduced across many different files.
71dnl #
72dnl # This logic really amounts to very little with autoconf 2.13; it will
73dnl # amount to a lot more with autoconf 2.5x.
74AC_DEFUN([GCC_TOPLEV_SUBDIRS],
75[AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_TARGET]) []dnl
76AC_REQUIRE([_GCC_TOPLEV_NONCANONICAL_BUILD]) []dnl
77
78# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
79# have matching libraries, they should use host libraries: Makefile.tpl
80# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
81# However, they still use the build modules, because the corresponding
82# host modules (e.g. bison) are only built for the host when bootstrap
83# finishes. So:
84# - build_subdir is where we find build modules, and never changes.
85# - build_libsubdir is where we find build libraries, and can be overridden.
86
87# Prefix 'build-' so this never conflicts with target_subdir.
88build_subdir="build-${build_noncanonical}"
89AC_ARG_WITH(build-libsubdir,
90[  --with-build-libsubdir=[DIR]  Directory where to find libraries for build system],
91build_libsubdir="$withval",
92build_libsubdir="$build_subdir")
93# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
94if ( test $srcdir = . && test -d gcc ) \
95   || test -d $srcdir/../host-${host_noncanonical}; then
96  host_subdir="host-${host_noncanonical}"
97else
98  host_subdir=.
99fi
100# No prefix.
101target_subdir=${target_noncanonical}
102AC_SUBST([build_libsubdir]) []dnl
103AC_SUBST([build_subdir]) []dnl
104AC_SUBST([host_subdir]) []dnl
105AC_SUBST([target_subdir]) []dnl
106]) []dnl # GCC_TOPLEV_SUBDIRS
107
108
109####
110# _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
111# or AC_INIT.
112# These demand that AC_CANONICAL_SYSTEM be called beforehand.
113AC_DEFUN([_NCN_TOOL_PREFIXES],
114[ncn_tool_prefix=
115test -n "$host_alias" && ncn_tool_prefix=$host_alias-
116ncn_target_tool_prefix=
117test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
118]) []dnl # _NCN_TOOL_PREFIXES
119
120####
121# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
122# Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
123
124AC_DEFUN([NCN_STRICT_CHECK_TOOLS],
125[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
126AC_ARG_VAR([$1], [$1 for the host])
127
128if test -n "[$]$1"; then
129  ac_cv_prog_$1=[$]$1
130elif test -n "$ac_cv_prog_$1"; then
131  $1=$ac_cv_prog_$1
132fi
133
134if test -n "$ac_cv_prog_$1"; then
135  for ncn_progname in $2; do
136    AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
137  done
138fi
139
140for ncn_progname in $2; do
141  if test -n "$ncn_tool_prefix"; then
142    AC_CHECK_PROG([$1], [${ncn_tool_prefix}${ncn_progname}],
143                  [${ncn_tool_prefix}${ncn_progname}], , [$4])
144  fi
145  if test -z "$ac_cv_prog_$1" && test $build = $host ; then
146    AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
147  fi
148  test -n "$ac_cv_prog_$1" && break
149done
150
151if test -z "$ac_cv_prog_$1" ; then
152  ifelse([$3],[], [set dummy $2
153  if test $build = $host ; then
154    $1="[$]2"
155  else
156    $1="${ncn_tool_prefix}[$]2"
157  fi], [$1="$3"])
158fi
159]) []dnl # NCN_STRICT_CHECK_TOOLS
160
161####
162# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
163# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
164
165AC_DEFUN([NCN_STRICT_CHECK_TARGET_TOOLS],
166[AC_REQUIRE([_NCN_TOOL_PREFIXES]) []dnl
167AC_ARG_VAR([$1], patsubst([$1], [_FOR_TARGET$], [])[ for the target])
168
169if test -n "[$]$1"; then
170  ac_cv_prog_$1=[$]$1
171elif test -n "$ac_cv_prog_$1"; then
172  $1=$ac_cv_prog_$1
173fi
174
175if test -n "$ac_cv_prog_$1"; then
176  for ncn_progname in $2; do
177    AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
178  done
179fi
180
181if test -z "$ac_cv_prog_$1" && test -n "$with_build_time_tools"; then
182  for ncn_progname in $2; do
183    AC_MSG_CHECKING([for ${ncn_progname} in $with_build_time_tools])
184    if test -x $with_build_time_tools/${ncn_progname}; then
185      ac_cv_prog_$1=$with_build_time_tools/${ncn_progname}
186      AC_MSG_RESULT(yes)
187      break
188    else
189      AC_MSG_RESULT(no)
190    fi
191  done
192fi
193
194if test -z "$ac_cv_prog_$1"; then
195  for ncn_progname in $2; do
196    if test -n "$ncn_target_tool_prefix"; then
197      AC_CHECK_PROG([$1], [${ncn_target_tool_prefix}${ncn_progname}],
198                    [${ncn_target_tool_prefix}${ncn_progname}], , [$4])
199    fi
200    if test -z "$ac_cv_prog_$1" && test $build = $target ; then
201      AC_CHECK_PROG([$1], [${ncn_progname}], [${ncn_progname}], , [$4])
202    fi
203    test -n "$ac_cv_prog_$1" && break
204  done
205fi
206 
207if test -z "$ac_cv_prog_$1" ; then
208  ifelse([$3],[], [set dummy $2
209  if test $build = $target ; then
210    $1="[$]2"
211  else
212    $1="${ncn_target_tool_prefix}[$]2"
213  fi], [$1="$3"])
214else
215  $1="$ac_cv_prog_$1"
216fi
217]) []dnl # NCN_STRICT_CHECK_TARGET_TOOLS
218 
219
220# Backported from Autoconf 2.5x; can go away when and if
221# we switch.  Put the OS path separator in $PATH_SEPARATOR.
222AC_DEFUN([ACX_PATH_SEP], [
223# The user is always right.
224if test "${PATH_SEPARATOR+set}" != set; then
225  echo "#! /bin/sh" >conf$$.sh
226  echo  "exit 0"   >>conf$$.sh
227  chmod +x conf$$.sh
228  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
229    PATH_SEPARATOR=';'
230  else
231    PATH_SEPARATOR=:
232  fi
233  rm -f conf$$.sh
234fi
235])
236
237
238AC_DEFUN([ACX_TOOL_DIRS], [
239AC_REQUIRE([ACX_PATH_SEP])
240if test "x$exec_prefix" = xNONE; then
241        if test "x$prefix" = xNONE; then
242                gcc_cv_tool_prefix=$ac_default_prefix
243        else
244                gcc_cv_tool_prefix=$prefix
245        fi
246else
247        gcc_cv_tool_prefix=$exec_prefix
248fi
249
250# If there is no compiler in the tree, use the PATH only.  In any
251# case, if there is no compiler in the tree nobody should use
252# AS_FOR_TARGET and LD_FOR_TARGET.
253if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
254    gcc_version=`cat $srcdir/gcc/BASE-VER`
255    gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
256    gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
257    gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
258    gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
259    gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
260    gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
261else
262    gcc_cv_tool_dirs=
263fi
264
265if test x$build = x$target && test -n "$md_exec_prefix"; then
266        gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
267fi
268
269]) []dnl # ACX_TOOL_DIRS
270
271# ACX_HAVE_GCC_FOR_TARGET
272# Check if the variable GCC_FOR_TARGET really points to a GCC binary.
273AC_DEFUN([ACX_HAVE_GCC_FOR_TARGET], [
274cat > conftest.c << \EOF
275#ifdef __GNUC__
276  gcc_yay;
277#endif
278EOF
279if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
280  have_gcc_for_target=yes
281else
282  GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
283  have_gcc_for_target=no
284fi
285rm conftest.c
286])
287
288# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
289# Searching for installed target binutils.  We need to take extra care,
290# else we may find the wrong assembler, linker, etc., and lose.
291#
292# First try --with-build-time-tools, if specified.
293#
294# For build != host, we ask the installed GCC for the name of the tool it
295# uses, and accept it if it is an absolute path.  This is because the
296# only good choice for a compiler is the same GCC version that is being
297# installed (or we couldn't make target libraries), and we assume that
298# on the host system we'll have not only the same GCC version, but also
299# the same binutils version.
300#
301# For build == host, search the same directories that the installed
302# compiler will search.  We used to do this for the assembler, linker,
303# and nm only; for simplicity of configuration, however, we extend this
304# criterion to tools (such as ar and ranlib) that are never invoked by
305# the compiler, to avoid mismatches.
306#
307# Also note we have to check MD_EXEC_PREFIX before checking the user's path
308# if build == target.  This makes the most sense only when bootstrapping,
309# but we also do so when build != host.  In this case, we hope that the
310# build and host systems will have similar contents of MD_EXEC_PREFIX.
311#
312# If we do not find a suitable binary, then try the user's path.
313
314AC_DEFUN([ACX_CHECK_INSTALLED_TARGET_TOOL], [
315AC_REQUIRE([ACX_TOOL_DIRS])
316AC_REQUIRE([ACX_HAVE_GCC_FOR_TARGET])
317if test -z "$ac_cv_path_$1" ; then
318  if test -n "$with_build_time_tools"; then
319    AC_MSG_CHECKING([for $2 in $with_build_time_tools])
320    if test -x $with_build_time_tools/$2; then
321      $1=`cd $with_build_time_tools && pwd`/$2
322      ac_cv_path_$1=[$]$1
323      AC_MSG_RESULT([$ac_cv_path_$1])
324    else
325      AC_MSG_RESULT(no)
326    fi
327  elif test $build != $host && test $have_gcc_for_target = yes; then
328    $1=`$GCC_FOR_TARGET --print-prog-name=$2`
329    test [$]$1 = $2 && $1=
330    test -n "[$]$1" && ac_cv_path_$1=[$]$1
331  fi
332fi
333if test -z "$ac_cv_path_$1" && test -n "$gcc_cv_tool_dirs"; then
334  AC_PATH_PROG([$1], [$2], [], [$gcc_cv_tool_dirs])
335fi
336if test -z "$ac_cv_path_$1" ; then
337  NCN_STRICT_CHECK_TARGET_TOOLS([$1], [$2])
338else
339  $1=$ac_cv_path_$1
340fi
341]) []dnl # ACX_CHECK_INSTALLED_TARGET_TOOL
342
343###
344# AC_PROG_CPP_WERROR
345# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
346# triggers warnings from the preprocessor.  Will be in autoconf 2.58.
347# For now, using this also overrides header checks to use only the
348# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
349# bit harder from here).
350# Eventually autoconf will default to checking headers with the compiler
351# instead, and we'll have to do this differently.
352
353AC_DEFUN([AC_PROG_CPP_WERROR],
354[AC_REQUIRE([AC_PROG_CPP])dnl
355m4_define([AC_CHECK_HEADER],m4_defn([_AC_CHECK_HEADER_OLD]))
356ac_c_preproc_warn_flag=yes])# AC_PROG_CPP_WERROR
357
358# Test for GNAT.
359# We require the gnatbind & gnatmake programs, as well as a compiler driver
360# that understands Ada.  We use the user's CC setting, already found, and
361# possibly add $1 to the command-line parameters.
362#
363# Sets the shell variable have_gnat to yes or no as appropriate, and
364# substitutes GNATBIND and GNATMAKE.
365AC_DEFUN([ACX_PROG_GNAT],
366[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])
367AC_REQUIRE([AC_PROG_CC])
368AC_CHECK_TOOL(GNATBIND, gnatbind, no)
369AC_CHECK_TOOL(GNATMAKE, gnatmake, no)
370AC_CACHE_CHECK([whether compiler driver understands Ada],
371                 acx_cv_cc_gcc_supports_ada,
372[cat >conftest.adb <<EOF
373procedure conftest is begin null; end conftest;
374EOF
375acx_cv_cc_gcc_supports_ada=no
376# There is a bug in old released versions of GCC which causes the
377# driver to exit successfully when the appropriate language module
378# has not been installed.  This is fixed in 2.95.4, 3.0.2, and 3.1.
379# Therefore we must check for the error message as well as an
380# unsuccessful exit.
381# Other compilers, like HP Tru64 UNIX cc, exit successfully when
382# given a .adb file, but produce no object file.  So we must check
383# if an object file was really produced to guard against this.
384errors=`(${CC} $1[]m4_ifval([$1], [ ])-c conftest.adb) 2>&1 || echo failure`
385if test x"$errors" = x && test -f conftest.$ac_objext; then
386  acx_cv_cc_gcc_supports_ada=yes
387fi
388rm -f conftest.*])
389
390if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
391  have_gnat=yes
392else
393  have_gnat=no
394fi
395])
396
397dnl 'make compare' can be significantly faster, if cmp itself can
398dnl skip bytes instead of using tail.  The test being performed is
399dnl "if cmp --ignore-initial=2 t1 t2 && ! cmp --ignore-initial=1 t1 t2"
400dnl but we need to sink errors and handle broken shells.  We also test
401dnl for the parameter format "cmp file1 file2 skip1 skip2" which is
402dnl accepted by cmp on some systems.
403AC_DEFUN([ACX_PROG_CMP_IGNORE_INITIAL],
404[AC_CACHE_CHECK([how to compare bootstrapped objects], gcc_cv_prog_cmp_skip,
405[ echo abfoo >t1
406  echo cdfoo >t2
407  gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
408  if cmp t1 t2 2 2 > /dev/null 2>&1; then
409    if cmp t1 t2 1 1 > /dev/null 2>&1; then
410      :
411    else
412      gcc_cv_prog_cmp_skip='cmp $$f1 $$f2 16 16'
413    fi
414  fi
415  if cmp --ignore-initial=2 t1 t2 > /dev/null 2>&1; then
416    if cmp --ignore-initial=1 t1 t2 > /dev/null 2>&1; then
417      :
418    else
419      gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
420    fi
421  fi
422  rm t1 t2
423])
424do_compare="$gcc_cv_prog_cmp_skip"
425AC_SUBST(do_compare)
426])
427
428dnl See whether we can include both string.h and strings.h.
429AC_DEFUN([ACX_HEADER_STRING],
430[AC_CACHE_CHECK([whether string.h and strings.h may both be included],
431  gcc_cv_header_string,
432[AC_TRY_COMPILE([#include <string.h>
433#include <strings.h>], , gcc_cv_header_string=yes, gcc_cv_header_string=no)])
434if test $gcc_cv_header_string = yes; then
435  AC_DEFINE(STRING_WITH_STRINGS, 1, [Define if you can safely include both <string.h> and <strings.h>.])
436fi
437])
438
439dnl See if stdbool.h properly defines bool and true/false.
440dnl Check whether _Bool is built-in.
441AC_DEFUN([ACX_HEADER_STDBOOL],
442[AC_CACHE_CHECK([for working stdbool.h],
443  ac_cv_header_stdbool_h,
444[AC_TRY_COMPILE([#include <stdbool.h>],
445[bool foo = false;],
446ac_cv_header_stdbool_h=yes, ac_cv_header_stdbool_h=no)])
447if test $ac_cv_header_stdbool_h = yes; then
448  AC_DEFINE(HAVE_STDBOOL_H, 1,
449  [Define if you have a working <stdbool.h> header file.])
450fi
451AC_CACHE_CHECK(for built-in _Bool, gcc_cv_c__bool,
452[AC_TRY_COMPILE(,
453[_Bool foo;],
454gcc_cv_c__bool=yes, gcc_cv_c__bool=no)
455])
456if test $gcc_cv_c__bool = yes; then
457  AC_DEFINE(HAVE__BOOL, 1, [Define if the \`_Bool' type is built-in.])
458fi
459])
460
461dnl See if hard links work and if not, try to substitute $1 or simple copy.
462AC_DEFUN([ACX_PROG_LN],
463[AC_MSG_CHECKING(whether ln works)
464AC_CACHE_VAL(acx_cv_prog_LN,
465[rm -f conftestdata_t
466echo >conftestdata_f
467if ln conftestdata_f conftestdata_t 2>/dev/null
468then
469  acx_cv_prog_LN=ln
470else
471  acx_cv_prog_LN=no
472fi
473rm -f conftestdata_f conftestdata_t
474])dnl
475if test $acx_cv_prog_LN = no; then
476  LN="ifelse([$1],,cp,[$1])"
477  AC_MSG_RESULT([no, using $LN])
478else
479  LN="$acx_cv_prog_LN"
480  AC_MSG_RESULT(yes)
481fi
482AC_SUBST(LN)dnl
483])
484
485dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE)
486AC_DEFUN([GCC_TARGET_TOOL],
487[AC_MSG_CHECKING(where to find the target $1)
488if test "x${build}" != "x${host}" ; then
489  if expr "x[$]$2" : "x/" > /dev/null; then
490    # We already found the complete path
491    ac_dir=`dirname [$]$2`
492    AC_MSG_RESULT(pre-installed in $ac_dir)
493  else
494    # Canadian cross, just use what we found
495    AC_MSG_RESULT(pre-installed)
496  fi
497else
498  ifelse([$4],,,
499  [ok=yes
500  case " ${configdirs} " in
501    *" patsubst([$4], [/.*], []) "*) ;;
502    *) ok=no ;;
503  esac
504  ifelse([$5],,,
505  [case ,${enable_languages}, in
506    *,$5,*) ;;
507    *) ok=no ;;
508  esac])
509  if test $ok = yes; then
510    # An in-tree tool is available and we can use it
511    $2='$$r/$(HOST_SUBDIR)/$4'
512    AC_MSG_RESULT(just compiled)
513  el])if expr "x[$]$2" : "x/" > /dev/null; then
514    # We already found the complete path
515    ac_dir=`dirname [$]$2`
516    AC_MSG_RESULT(pre-installed in $ac_dir)
517  elif test "x$target" = "x$host"; then
518    # We can use an host tool
519    $2='$($3)'
520    AC_MSG_RESULT(host tool)
521  else
522    # We need a cross tool
523    AC_MSG_RESULT(pre-installed)
524  fi
525fi
526AC_SUBST($2)])
527
528
529dnl Locate a program and check that its version is acceptable.
530dnl ACX_PROG_CHECK_VER(var, name, version-switch,
531dnl                    version-extract-regexp, version-glob)
532AC_DEFUN([ACX_CHECK_PROG_VER],[
533  AC_CHECK_PROG([$1], [$2], [$2])
534  if test -n "[$]$1"; then
535    # Found it, now check the version.
536    AC_CACHE_CHECK([for modern $2],
537                   [gcc_cv_prog_$2_modern],
538                   [ac_prog_version=`eval [$]$1 $3 2>&1 |
539                                     sed -n 's/^.*patsubst([[$4]],/,\/).*$/\1/p'`
540
541                    [case $ac_prog_version in
542                      '')  gcc_cv_prog_$2_modern=no;;
543                      $5)  gcc_cv_prog_$2_modern=yes;;
544                      *)   gcc_cv_prog_$2_modern=no;;
545                    esac]
546                   ])
547  else
548    gcc_cv_prog_$2_modern=no
549  fi
550  if test $gcc_cv_prog_$2_modern = no; then
551    $1="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing $2"
552  fi
553])
554
555dnl Support the --with-pkgversion configure option.
556dnl ACX_PKGVERSION(default-pkgversion)
557AC_DEFUN([ACX_PKGVERSION],[
558  AC_ARG_WITH(pkgversion,
559    AS_HELP_STRING([--with-pkgversion=PKG],
560                   [Use PKG in the version string in place of "$1"]),
561    [case "$withval" in
562      yes) AC_MSG_ERROR([package version not specified]) ;;
563      no)  PKGVERSION= ;;
564      *)   PKGVERSION="($withval) " ;;
565     esac],
566    PKGVERSION="($1) "
567  )
568  AC_SUBST(PKGVERSION)
569])
570
571dnl Support the --with-bugurl configure option.
572dnl ACX_BUGURL(default-bugurl)
573AC_DEFUN([ACX_BUGURL],[
574  AC_ARG_WITH(bugurl,
575    AS_HELP_STRING([--with-bugurl=URL],
576                   [Direct users to URL to report a bug]),
577    [case "$withval" in
578      yes) AC_MSG_ERROR([bug URL not specified]) ;;
579      no)  BUGURL=
580           ;;
581      *)   BUGURL="$withval"
582           ;;
583     esac],
584     BUGURL="$1"
585  )
586  case ${BUGURL} in
587  "")
588    REPORT_BUGS_TO=
589    REPORT_BUGS_TEXI=
590    ;;
591  *)
592    REPORT_BUGS_TO="<$BUGURL>"
593    REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
594    ;;
595  esac;
596  AC_SUBST(REPORT_BUGS_TO)
597  AC_SUBST(REPORT_BUGS_TEXI)
598])
599
600dnl ####
601dnl # ACX_CHECK_CYGWIN_CAT_WORKS
602dnl # On Cygwin hosts, check that the cat command ignores
603dnl # carriage returns as otherwise builds will not work.
604dnl # See binutils PR 4334 for more details.
605AC_DEFUN([ACX_CHECK_CYGWIN_CAT_WORKS],[
606AC_MSG_CHECKING([to see if cat works as expected])
607echo a >cygwin-cat-check
608if test `cat cygwin-cat-check` = a ; then
609  rm cygwin-cat-check
610  AC_MSG_RESULT(yes)
611else
612  rm cygwin-cat-check
613  AC_MSG_RESULT(no)
614  AC_MSG_ERROR([The cat command does not ignore carriage return characters.
615  Please either mount the build directory in binary mode or run the following
616  commands before running any configure script:
617set -o igncr
618export SHELLOPTS
619  ])
620fi
621])
Note: See TracBrowser for help on using the repository browser.