source: trunk/libs/newlib/src/include/gdb/remote-sim.h @ 503

Last change on this file since 503 was 444, checked in by satin@…, 6 years ago

add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc

File size: 9.8 KB
Line 
1/* This file defines the interface between the simulator and gdb.
2
3   Copyright 1993-2013 Free Software Foundation, Inc.
4
5   This file is part of GDB.
6
7   This program is free software; you can redistribute it and/or modify
8   it under the terms of the GNU General Public License as published by
9   the Free Software Foundation; either version 3 of the License, or
10   (at your option) any later version.
11
12   This program is distributed in the hope that it will be useful,
13   but WITHOUT ANY WARRANTY; without even the implied warranty of
14   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15   GNU General Public License for more details.
16
17   You should have received a copy of the GNU General Public License
18   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
19
20#if !defined (REMOTE_SIM_H)
21#define REMOTE_SIM_H 1
22
23#ifdef __cplusplus
24extern "C" {
25#endif
26
27/* This file is used when building stand-alone simulators, so isolate this
28   file from gdb.  */
29
30/* Pick up CORE_ADDR_TYPE if defined (from gdb), otherwise use same value as
31   gdb does (unsigned int - from defs.h).  */
32
33#ifndef CORE_ADDR_TYPE
34typedef unsigned int SIM_ADDR;
35#else
36typedef CORE_ADDR_TYPE SIM_ADDR;
37#endif
38
39
40/* Semi-opaque type used as result of sim_open and passed back to all
41   other routines.  "desc" is short for "descriptor".
42   It is up to each simulator to define `sim_state'.  */
43
44typedef struct sim_state *SIM_DESC;
45
46
47/* Values for `kind' arg to sim_open.  */
48
49typedef enum {
50  SIM_OPEN_STANDALONE, /* simulator used standalone (run.c) */
51  SIM_OPEN_DEBUG       /* simulator used by debugger (gdb) */
52} SIM_OPEN_KIND;
53
54
55/* Return codes from various functions.  */
56
57typedef enum {
58  SIM_RC_FAIL = 0,
59  SIM_RC_OK = 1
60} SIM_RC;
61
62
63/* The bfd struct, as an opaque type.  */
64
65struct bfd;
66
67
68/* Main simulator entry points.  */
69
70
71/* Create a fully initialized simulator instance.
72
73   (This function is called when the simulator is selected from the
74   gdb command line.)
75
76   KIND specifies how the simulator shall be used.  Currently there
77   are only two kinds: stand-alone and debug.
78
79   CALLBACK specifies a standard host callback (defined in callback.h).
80
81   ABFD, when non NULL, designates a target program.  The program is
82   not loaded.
83
84   ARGV is a standard ARGV pointer such as that passed from the
85   command line.  The syntax of the argument list is is assumed to be
86   ``SIM-PROG { SIM-OPTION } [ TARGET-PROGRAM { TARGET-OPTION } ]''.
87   The trailing TARGET-PROGRAM and args are only valid for a
88   stand-alone simulator.
89
90   On success, the result is a non NULL descriptor that shall be
91   passed to the other sim_foo functions.  While the simulator
92   configuration can be parameterized by (in decreasing precedence)
93   ARGV's SIM-OPTION, ARGV's TARGET-PROGRAM and the ABFD argument, the
94   successful creation of the simulator shall not dependent on the
95   presence of any of these arguments/options.
96
97   Hardware simulator: The created simulator shall be sufficiently
98   initialized to handle, with out restrictions any client requests
99   (including memory reads/writes, register fetch/stores and a
100   resume).
101
102   Process simulator: that process is not created until a call to
103   sim_create_inferior.  FIXME: What should the state of the simulator
104   be? */
105
106SIM_DESC sim_open (SIM_OPEN_KIND kind, struct host_callback_struct *callback, struct bfd *abfd, char **argv);
107
108
109/* Destory a simulator instance.
110
111   QUITTING is non-zero if we cannot hang on errors.
112
113   This may involve freeing target memory and closing any open files
114   and mmap'd areas.  You cannot assume sim_kill has already been
115   called. */
116
117void sim_close (SIM_DESC sd, int quitting);
118
119
120/* Load program PROG into the simulators memory.
121
122   If ABFD is non-NULL, the bfd for the file has already been opened.
123   The result is a return code indicating success.
124
125   Hardware simulator: Normally, each program section is written into
126   memory according to that sections LMA using physical (direct)
127   addressing.  The exception being systems, such as PPC/CHRP, which
128   support more complicated program loaders.  A call to this function
129   should not effect the state of the processor registers.  Multiple
130   calls to this function are permitted and have an accumulative
131   effect.
132
133   Process simulator: Calls to this function may be ignored.
134
135   FIXME: Most hardware simulators load the image at the VMA using
136   virtual addressing.
137
138   FIXME: For some hardware targets, before a loaded program can be
139   executed, it requires the manipulation of VM registers and tables.
140   Such manipulation should probably (?) occure in
141   sim_create_inferior. */
142
143SIM_RC sim_load (SIM_DESC sd, char *prog, struct bfd *abfd, int from_tty);
144
145
146/* Prepare to run the simulated program.
147
148   ABFD, if not NULL, provides initial processor state information.
149   ARGV and ENV, if non NULL, are NULL terminated lists of pointers.
150
151   Hardware simulator: This function shall initialize the processor
152   registers to a known value.  The program counter and possibly stack
153   pointer shall be set using information obtained from ABFD (or
154   hardware reset defaults).  ARGV and ENV, dependant on the target
155   ABI, may be written to memory.
156
157   Process simulator: After a call to this function, a new process
158   instance shall exist. The TEXT, DATA, BSS and stack regions shall
159   all be initialized, ARGV and ENV shall be written to process
160   address space (according to the applicable ABI) and the program
161   counter and stack pointer set accordingly. */
162
163SIM_RC sim_create_inferior (SIM_DESC sd, struct bfd *abfd, char **argv, char **env);
164
165
166/* Fetch LENGTH bytes of the simulated program's memory.  Start fetch
167   at virtual address MEM and store in BUF.  Result is number of bytes
168   read, or zero if error.  */
169
170int sim_read (SIM_DESC sd, SIM_ADDR mem, unsigned char *buf, int length);
171
172
173/* Store LENGTH bytes from BUF into the simulated program's
174   memory. Store bytes starting at virtual address MEM. Result is
175   number of bytes write, or zero if error.  */
176
177int sim_write (SIM_DESC sd, SIM_ADDR mem, const unsigned char *buf, int length);
178
179
180/* Fetch register REGNO storing its raw (target endian) value in the
181   LENGTH byte buffer BUF.  Return the actual size of the register or
182   zero if REGNO is not applicable.
183
184   Legacy implementations ignore LENGTH and always return -1.
185
186   If LENGTH does not match the size of REGNO no data is transfered
187   (the actual register size is still returned). */
188
189int sim_fetch_register (SIM_DESC sd, int regno, unsigned char *buf, int length);
190
191
192/* Store register REGNO from the raw (target endian) value in BUF.
193
194   Return the actual size of the register, any size not equal to
195   LENGTH indicates the register was not updated correctly.
196
197   Return a LENGTH of -1 to indicate the register was not updated
198   and an error has occurred.
199
200   Return a LENGTH of 0 to indicate the register was not updated
201   but no error has occurred. */
202
203int sim_store_register (SIM_DESC sd, int regno, unsigned char *buf, int length);
204
205
206/* Print whatever statistics the simulator has collected.
207
208   VERBOSE is currently unused and must always be zero.  */
209
210void sim_info (SIM_DESC sd, int verbose);
211
212
213/* Run (or resume) the simulated program.
214
215   STEP, when non-zero indicates that only a single simulator cycle
216   should be emulated.
217
218   SIGGNAL, if non-zero is a (HOST) SIGRC value indicating the type of
219   event (hardware interrupt, signal) to be delivered to the simulated
220   program.
221
222   Hardware simulator: If the SIGRC value returned by
223   sim_stop_reason() is passed back to the simulator via SIGGNAL then
224   the hardware simulator shall correctly deliver the hardware event
225   indicated by that signal.  If a value of zero is passed in then the
226   simulation will continue as if there were no outstanding signal.
227   The effect of any other SIGGNAL value is is implementation
228   dependant.
229
230   Process simulator: If SIGRC is non-zero then the corresponding
231   signal is delivered to the simulated program and execution is then
232   continued.  A zero SIGRC value indicates that the program should
233   continue as normal. */
234
235void sim_resume (SIM_DESC sd, int step, int siggnal);
236
237
238/* Asynchronous request to stop the simulation.
239   A nonzero return indicates that the simulator is able to handle
240   the request */
241
242int sim_stop (SIM_DESC sd);
243
244
245/* Fetch the REASON why the program stopped.
246
247   SIM_EXITED: The program has terminated. SIGRC indicates the target
248   dependant exit status.
249
250   SIM_STOPPED: The program has stopped.  SIGRC uses the host's signal
251   numbering as a way of identifying the reaon: program interrupted by
252   user via a sim_stop request (SIGINT); a breakpoint instruction
253   (SIGTRAP); a completed single step (SIGTRAP); an internal error
254   condition (SIGABRT); an illegal instruction (SIGILL); Access to an
255   undefined memory region (SIGSEGV); Mis-aligned memory access
256   (SIGBUS).  For some signals information in addition to the signal
257   number may be retained by the simulator (e.g. offending address),
258   that information is not directly accessable via this interface.
259
260   SIM_SIGNALLED: The program has been terminated by a signal. The
261   simulator has encountered target code that causes the the program
262   to exit with signal SIGRC.
263
264   SIM_RUNNING, SIM_POLLING: The return of one of these values
265   indicates a problem internal to the simulator. */
266
267enum sim_stop { sim_running, sim_polling, sim_exited, sim_stopped, sim_signalled };
268
269void sim_stop_reason (SIM_DESC sd, enum sim_stop *reason, int *sigrc);
270
271
272/* Passthru for other commands that the simulator might support.
273   Simulators should be prepared to deal with any combination of NULL
274   or empty CMD. */
275
276void sim_do_command (SIM_DESC sd, char *cmd);
277
278/* Complete a command based on the available sim commands.  Returns an
279   array of possible matches.  */
280
281char **sim_complete_command (SIM_DESC sd, const char *text, const char *word);
282
283#ifdef __cplusplus
284}
285#endif
286
287#endif /* !defined (REMOTE_SIM_H) */
Note: See TracBrowser for help on using the repository browser.