source: trunk/libs/newlib/src/include/opcode/d30v.h @ 444

/* d30v.h -- Header file for D30V opcode table
   Copyright 1997, 1998, 1999, 2000, 2001, 2003, 2010
   Free Software Foundation, Inc.
   Written by Martin Hunt (hunt@cygnus.com), Cygnus Solutions

   This file is part of GDB, GAS, and the GNU binutils.

   GDB, GAS, and the GNU binutils are free software; you can redistribute
   them and/or modify them under the terms of the GNU General Public
   License as published by the Free Software Foundation; either version 3,
   or (at your option) any later version.

   GDB, GAS, and the GNU binutils are distributed in the hope that they
   will be useful, but WITHOUT ANY WARRANTY; without even the implied
   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
   the GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this file; see the file COPYING3.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
   MA 02110-1301, USA.  */

#ifndef D30V_H
#define D30V_H

#define NOP 0x00F00000

/* Structure to hold information about predefined registers.  */
struct pd_reg
{
  char *name;           /* name to recognize */
  char *pname;          /* name to print for this register */
  int value;
};

extern const struct pd_reg pre_defined_registers[];
int reg_name_cnt (void);

/* the number of control registers */
#define MAX_CONTROL_REG 64

/* define the format specifiers */
#define FM00    0
#define FM01    0x80000000
#define FM10    0x8000000000000000LL
#define FM11    0x8000000080000000LL

/* define the opcode classes */
#define BRA     0
#define LOGIC   1
#define IMEM    2
#define IALU1   4
#define IALU2   5

/* define the execution condition codes */
#define ECC_AL  0       /* ALways (default) */
#define ECC_TX  1       /* F0=True, F1=Don't care */
#define ECC_FX  2       /* F0=False, F1=Don't care */
#define ECC_XT  3       /* F0=Don't care, F1=True */
#define ECC_XF  4       /* F0=Don't care, F1=False */
#define ECC_TT  5       /* F0=True, F1=True */
#define ECC_TF  6       /* F0=True, F1=False */
#define ECC_RESERVED    7       /* reserved */
#define ECC_MAX ECC_RESERVED

extern const char *d30v_ecc_names[];

/* condition code table for CMP and CMPU */
extern const char *d30v_cc_names[];

/* The opcode table is an array of struct d30v_opcode.  */
struct d30v_opcode
{
  /* The opcode name.  */
  const char *name;

  /* the opcode */
  int op1;      /* first part, "IALU1" for example */
  int op2;      /* the rest of the opcode */

  /* opcode format(s).  These numbers correspond to entries */
  /* in the d30v_format_table */
  unsigned char format[4];

#define SHORT_M         1
#define SHORT_M2        5       /* for ld2w and st2w */
#define SHORT_A         9
#define SHORT_B1        11
#define SHORT_B2        12
#define SHORT_B2r     13
#define SHORT_B3      14
#define SHORT_B3r     16
#define SHORT_B3b     18
#define SHORT_B3br    20
#define SHORT_D1r     22
#define SHORT_D2      24
#define SHORT_D2r     26
#define SHORT_D2Br    28
#define SHORT_U       30      /* unary SHORT_A.  ABS for example */
#define SHORT_F       31      /* SHORT_A with flag registers */
#define SHORT_AF      33      /* SHORT_A with only the first register a flag register */
#define SHORT_T       35      /* for trap instruction */
#define SHORT_A5      36      /* SHORT_A with a 5-bit immediate instead of 6 */
#define SHORT_CMP     38      /* special form for CMPcc */
#define SHORT_CMPU    40      /* special form for CMPUcc */
#define SHORT_A1      42      /* special form of SHORT_A for MACa opcodes where a=1 */
#define SHORT_AA      44      /* SHORT_A with the first register an accumulator */
#define SHORT_RA      46      /* SHORT_A with the second register an accumulator */
#define SHORT_MODINC  48      
#define SHORT_MODDEC  49
#define SHORT_C1      50
#define SHORT_C2      51
#define SHORT_UF      52
#define SHORT_A2      53
#define SHORT_NONE    55      /* no operands */
#define SHORT_AR      56      /* like SHORT_AA but only accept register as third parameter  */
#define LONG          57
#define LONG_U        58      /* unary LONG */
#define LONG_Ur       59      /* LONG pc-relative */
#define LONG_CMP      60      /* special form for CMPcc and CMPUcc */
#define LONG_M        61      /* Memory long for ldb, stb */
#define LONG_M2       62      /* Memory long for ld2w, st2w */
#define LONG_2        63      /* LONG with 2 operands; jmptnz */
#define LONG_2r       64      /* LONG with 2 operands; bratnz */
#define LONG_2b       65      /* LONG_2 with modifier of 3 */
#define LONG_2br      66      /* LONG_2r with modifier of 3 */
#define LONG_D        67      /* for DJMPI */
#define LONG_Dr       68      /* for DBRAI */
#define LONG_Dbr      69      /* for repeati */

  /* the execution unit(s) used */
  int unit;
#define EITHER  0
#define IU      1
#define MU      2
#define EITHER_BUT_PREFER_MU 3

  /* this field is used to decide if two instructions */
  /* can be executed in parallel */
  long flags_used;
  long flags_set;
#define FLAG_0          (1L<<0)
#define FLAG_1          (1L<<1)
#define FLAG_2          (1L<<2)
#define FLAG_3          (1L<<3)
#define FLAG_4          (1L<<4)         /* S (saturation) */
#define FLAG_5          (1L<<5)         /* V (overflow) */
#define FLAG_6          (1L<<6)         /* VA (accumulated overflow) */
#define FLAG_7          (1L<<7)         /* C (carry/borrow) */
#define FLAG_SM         (1L<<8)         /* SM (stack mode) */
#define FLAG_RP         (1L<<9)         /* RP (repeat enable) */
#define FLAG_CONTROL    (1L<<10)        /* control registers */
#define FLAG_A0         (1L<<11)        /* A0 */
#define FLAG_A1         (1L<<12)        /* A1 */
#define FLAG_JMP        (1L<<13)        /* instruction is a branch */
#define FLAG_JSR        (1L<<14)        /* subroutine call.  must be aligned */
#define FLAG_MEM        (1L<<15)        /* reads/writes memory */
#define FLAG_NOT_WITH_ADDSUBppp  (1L<<16) /* Old meaning: a 2 word 4 byter operation
                                           New meaning: operation cannot be 
                                           combined in parallel with ADD/SUBppp. */
#define FLAG_MUL16      (1L<<17)        /* 16 bit multiply */
#define FLAG_MUL32      (1L<<18)        /* 32 bit multiply */
#define FLAG_ADDSUBppp  (1L<<19)        /* ADDppp or SUBppp */
#define FLAG_DELAY      (1L<<20)        /* This is a delayed branch or jump */
#define FLAG_LKR        (1L<<21)        /* insn in left slot kills right slot */
#define FLAG_CVVA       (FLAG_5|FLAG_6|FLAG_7)
#define FLAG_C          FLAG_7
#define FLAG_ALL        (FLAG_0 | \
                         FLAG_1 | \
                         FLAG_2 | \
                         FLAG_3 | \
                         FLAG_4 | \
                         FLAG_5 | \
                         FLAG_6 | \
                         FLAG_7 | \
                         FLAG_SM | \
                         FLAG_RP | \
                         FLAG_CONTROL)

  int reloc_flag;
#define RELOC_PCREL     1
#define RELOC_ABS       2
};

extern const struct d30v_opcode d30v_opcode_table[];
extern const int d30v_num_opcodes;

/* The operands table is an array of struct d30v_operand.  */
struct d30v_operand
{
  /* the length of the field */
  int length;

  /* The number of significant bits in the operand.  */
  int bits;

  /* position relative to Ra */
  int position;

  /* syntax flags.  */
  long flags;
};
extern const struct d30v_operand d30v_operand_table[];

/* Values defined for the flags field of a struct d30v_operand.  */

/* this is the destination register; it will be modified */
/* this is used by the optimizer */
#define OPERAND_DEST    (1)

/* number or symbol */
#define OPERAND_NUM     (2)

/* address or label */
#define OPERAND_ADDR    (4)

/* register */
#define OPERAND_REG     (8)

/* postincrement +  */
#define OPERAND_PLUS    (0x10)

/* postdecrement -  */
#define OPERAND_MINUS   (0x20)

/* signed number */
#define OPERAND_SIGNED  (0x40)

/* this operand must be shifted left by 3 */
#define OPERAND_SHIFT   (0x80)

/* flag register */
#define OPERAND_FLAG    (0x100)

/* control register  */
#define OPERAND_CONTROL (0x200)

/* accumulator */
#define OPERAND_ACC     (0x400)

/* @  */
#define OPERAND_ATSIGN  (0x800)

/* @(  */
#define OPERAND_ATPAR   (0x1000)

/* predecrement mode '@-sp'  */
#define OPERAND_ATMINUS (0x2000)

/* this operand changes the instruction name */
/* for example, CPMcc, CMPUcc */
#define OPERAND_NAME    (0x4000)

/* fake operand for mvtsys and mvfsys */
#define OPERAND_SPECIAL (0x8000)

/* let the optimizer know that two registers are affected */
#define OPERAND_2REG    (0x10000)

/* This operand is pc-relative.  Note that repeati can have two immediate
   operands, one of which is pcrel, the other (the IMM6U one) is not.  */
#define OPERAND_PCREL   (0x20000)

/* The format table is an array of struct d30v_format.  */
struct d30v_format
{
  int   form;           /* SHORT_A, LONG, etc */
  int   modifier;       /* two bit modifier following opcode */
  unsigned char operands[5];
};
extern const struct d30v_format d30v_format_table[];


/* an instruction is defined by an opcode and a format */
/* for example, "add" has one opcode, but three different */
/* formats, 2 SHORT_A forms and a LONG form. */
struct d30v_insn
{
  struct d30v_opcode *op;       /* pointer to an entry in the opcode table */
  struct d30v_format *form;     /* pointer to an entry in the format table */
  int ecc;                      /* execution condition code */
};

/* an expressionS only has one register type, so we fake it */
/* by setting high bits to indicate type */
#define REGISTER_MASK   0xFF

#endif /* D30V_H */