source: trunk/libs/newlib/src/libgloss/bfin/include/defBF516.h @ 444

Last change on this file since 444 was 444, checked in by satin@…, 6 years ago

add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc

File size: 62.7 KB
Line 
1/*
2 * The authors hereby grant permission to use, copy, modify, distribute,
3 * and license this software and its documentation for any purpose, provided
4 * that existing copyright notices are retained in all copies and that this
5 * notice is included verbatim in any distributions. No written agreement,
6 * license, or royalty fee is required for any of the authorized uses.
7 * Modifications to this software may be copyrighted by their authors
8 * and need not follow the licensing terms described here, provided that
9 * the new terms are clearly indicated on the first page of each file where
10 * they apply.
11 */
12
13/*
14** Copyright (C) 2006-2008 Analog Devices Inc., All Rights Reserved.
15**
16************************************************************************************
17**
18** This include file contains a list of macro "defines" to enable the programmer
19** to use symbolic names for register-access and bit-manipulation.
20**
21**/
22#ifndef _DEF_BF516_H
23#define _DEF_BF516_H
24
25/* Include all Core registers and bit definitions */
26#include <def_LPBlackfin.h>
27
28/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
29
30/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
31#include <defBF51x_base.h>
32
33#ifdef _MISRA_RULES
34#pragma diag(push)
35#pragma diag(suppress:misra_rule_19_4:"macros not strictly following 19.4")
36#pragma diag(suppress:misra_rule_19_7:"Allow function-like macros")
37#endif /* _MISRA_RULES */
38
39/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
40/* 10/100 Ethernet Controller   (0xFFC03000 - 0xFFC031FF) */
41
42#define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
43#define EMAC_ADDRLO             0xFFC03004       /* Address Low (32 LSBs) Register                       */
44#define EMAC_ADDRHI             0xFFC03008       /* Address High (16 MSBs) Register                      */
45#define EMAC_HASHLO             0xFFC0300C       /* Multicast Hash Table Low (Bins 31-0) Register        */
46#define EMAC_HASHHI             0xFFC03010       /* Multicast Hash Table High (Bins 63-32) Register      */
47#define EMAC_STAADD             0xFFC03014       /* Station Management Address Register                  */
48#define EMAC_STADAT             0xFFC03018       /* Station Management Data Register                     */
49#define EMAC_FLC                0xFFC0301C       /* Flow Control Register                                */
50#define EMAC_VLAN1              0xFFC03020       /* VLAN1 Tag Register                                   */
51#define EMAC_VLAN2              0xFFC03024       /* VLAN2 Tag Register                                   */
52#define EMAC_WKUP_CTL           0xFFC0302C       /* Wake-Up Control/Status Register                      */
53#define EMAC_WKUP_FFMSK0        0xFFC03030       /* Wake-Up Frame Filter 0 Byte Mask Register            */
54#define EMAC_WKUP_FFMSK1        0xFFC03034       /* Wake-Up Frame Filter 1 Byte Mask Register            */
55#define EMAC_WKUP_FFMSK2        0xFFC03038       /* Wake-Up Frame Filter 2 Byte Mask Register            */
56#define EMAC_WKUP_FFMSK3        0xFFC0303C       /* Wake-Up Frame Filter 3 Byte Mask Register            */
57#define EMAC_WKUP_FFCMD         0xFFC03040       /* Wake-Up Frame Filter Commands Register               */
58#define EMAC_WKUP_FFOFF         0xFFC03044       /* Wake-Up Frame Filter Offsets Register                */
59#define EMAC_WKUP_FFCRC0        0xFFC03048       /* Wake-Up Frame Filter 0,1 CRC-16 Register             */
60#define EMAC_WKUP_FFCRC1        0xFFC0304C       /* Wake-Up Frame Filter 2,3 CRC-16 Register             */
61
62#define EMAC_SYSCTL             0xFFC03060       /* EMAC System Control Register                         */
63#define EMAC_SYSTAT             0xFFC03064       /* EMAC System Status Register                          */
64#define EMAC_RX_STAT            0xFFC03068       /* RX Current Frame Status Register                     */
65#define EMAC_RX_STKY            0xFFC0306C       /* RX Sticky Frame Status Register                      */
66#define EMAC_RX_IRQE            0xFFC03070       /* RX Frame Status Interrupt Enables Register           */
67#define EMAC_TX_STAT            0xFFC03074       /* TX Current Frame Status Register                     */
68#define EMAC_TX_STKY            0xFFC03078       /* TX Sticky Frame Status Register                      */
69#define EMAC_TX_IRQE            0xFFC0307C       /* TX Frame Status Interrupt Enables Register           */
70
71#define EMAC_MMC_CTL            0xFFC03080       /* MMC Counter Control Register                         */
72#define EMAC_MMC_RIRQS          0xFFC03084       /* MMC RX Interrupt Status Register                     */
73#define EMAC_MMC_RIRQE          0xFFC03088       /* MMC RX Interrupt Enables Register                    */
74#define EMAC_MMC_TIRQS          0xFFC0308C       /* MMC TX Interrupt Status Register                     */
75#define EMAC_MMC_TIRQE          0xFFC03090       /* MMC TX Interrupt Enables Register                    */
76
77#define EMAC_RXC_OK             0xFFC03100       /* RX Frame Successful Count                            */
78#define EMAC_RXC_FCS            0xFFC03104       /* RX Frame FCS Failure Count                           */
79#define EMAC_RXC_ALIGN          0xFFC03108       /* RX Alignment Error Count                             */
80#define EMAC_RXC_OCTET          0xFFC0310C       /* RX Octets Successfully Received Count                */
81#define EMAC_RXC_DMAOVF         0xFFC03110       /* Internal MAC Sublayer Error RX Frame Count           */
82#define EMAC_RXC_UNICST         0xFFC03114       /* Unicast RX Frame Count                               */
83#define EMAC_RXC_MULTI          0xFFC03118       /* Multicast RX Frame Count                             */
84#define EMAC_RXC_BROAD          0xFFC0311C       /* Broadcast RX Frame Count                             */
85#define EMAC_RXC_LNERRI         0xFFC03120       /* RX Frame In Range Error Count                        */
86#define EMAC_RXC_LNERRO         0xFFC03124       /* RX Frame Out Of Range Error Count                    */
87#define EMAC_RXC_LONG           0xFFC03128       /* RX Frame Too Long Count                              */
88#define EMAC_RXC_MACCTL         0xFFC0312C       /* MAC Control RX Frame Count                           */
89#define EMAC_RXC_OPCODE         0xFFC03130       /* Unsupported Op-Code RX Frame Count                   */
90#define EMAC_RXC_PAUSE          0xFFC03134       /* MAC Control Pause RX Frame Count                     */
91#define EMAC_RXC_ALLFRM         0xFFC03138       /* Overall RX Frame Count                               */
92#define EMAC_RXC_ALLOCT         0xFFC0313C       /* Overall RX Octet Count                               */
93#define EMAC_RXC_TYPED          0xFFC03140       /* Type/Length Consistent RX Frame Count                */
94#define EMAC_RXC_SHORT          0xFFC03144       /* RX Frame Fragment Count - Byte Count x < 64          */
95#define EMAC_RXC_EQ64           0xFFC03148       /* Good RX Frame Count - Byte Count x = 64              */
96#define EMAC_RXC_LT128          0xFFC0314C       /* Good RX Frame Count - Byte Count  64 < x < 128       */
97#define EMAC_RXC_LT256          0xFFC03150       /* Good RX Frame Count - Byte Count 128 <= x < 256      */
98#define EMAC_RXC_LT512          0xFFC03154       /* Good RX Frame Count - Byte Count 256 <= x < 512      */
99#define EMAC_RXC_LT1024         0xFFC03158       /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
100#define EMAC_RXC_GE1024         0xFFC0315C       /* Good RX Frame Count - Byte Count x >= 1024           */
101
102#define EMAC_TXC_OK             0xFFC03180       /* TX Frame Successful Count                             */
103#define EMAC_TXC_1COL           0xFFC03184       /* TX Frames Successful After Single Collision Count     */
104#define EMAC_TXC_GT1COL         0xFFC03188       /* TX Frames Successful After Multiple Collisions Count  */
105#define EMAC_TXC_OCTET          0xFFC0318C       /* TX Octets Successfully Received Count                 */
106#define EMAC_TXC_DEFER          0xFFC03190       /* TX Frame Delayed Due To Busy Count                    */
107#define EMAC_TXC_LATECL         0xFFC03194       /* Late TX Collisions Count                              */
108#define EMAC_TXC_XS_COL         0xFFC03198       /* TX Frame Failed Due To Excessive Collisions Count     */
109#define EMAC_TXC_DMAUND         0xFFC0319C       /* Internal MAC Sublayer Error TX Frame Count            */
110#define EMAC_TXC_CRSERR         0xFFC031A0       /* Carrier Sense Deasserted During TX Frame Count        */
111#define EMAC_TXC_UNICST         0xFFC031A4       /* Unicast TX Frame Count                                */
112#define EMAC_TXC_MULTI          0xFFC031A8       /* Multicast TX Frame Count                              */
113#define EMAC_TXC_BROAD          0xFFC031AC       /* Broadcast TX Frame Count                              */
114#define EMAC_TXC_XS_DFR         0xFFC031B0       /* TX Frames With Excessive Deferral Count               */
115#define EMAC_TXC_MACCTL         0xFFC031B4       /* MAC Control TX Frame Count                            */
116#define EMAC_TXC_ALLFRM         0xFFC031B8       /* Overall TX Frame Count                                */
117#define EMAC_TXC_ALLOCT         0xFFC031BC       /* Overall TX Octet Count                                */
118#define EMAC_TXC_EQ64           0xFFC031C0       /* Good TX Frame Count - Byte Count x = 64               */
119#define EMAC_TXC_LT128          0xFFC031C4       /* Good TX Frame Count - Byte Count  64 < x < 128        */
120#define EMAC_TXC_LT256          0xFFC031C8       /* Good TX Frame Count - Byte Count 128 <= x < 256       */
121#define EMAC_TXC_LT512          0xFFC031CC       /* Good TX Frame Count - Byte Count 256 <= x < 512       */
122#define EMAC_TXC_LT1024         0xFFC031D0       /* Good TX Frame Count - Byte Count 512 <= x < 1024      */
123#define EMAC_TXC_GE1024         0xFFC031D4       /* Good TX Frame Count - Byte Count x >= 1024            */
124#define EMAC_TXC_ABORT          0xFFC031D8       /* Total TX Frames Aborted Count                         */
125
126/* Listing for IEEE-Supported Count Registers */
127
128#define FramesReceivedOK                EMAC_RXC_OK        /* RX Frame Successful Count                            */
129#define FrameCheckSequenceErrors        EMAC_RXC_FCS       /* RX Frame FCS Failure Count                           */
130#define AlignmentErrors                 EMAC_RXC_ALIGN     /* RX Alignment Error Count                             */
131#define OctetsReceivedOK                EMAC_RXC_OCTET     /* RX Octets Successfully Received Count                */
132#define FramesLostDueToIntMACRcvError   EMAC_RXC_DMAOVF    /* Internal MAC Sublayer Error RX Frame Count           */
133#define UnicastFramesReceivedOK         EMAC_RXC_UNICST    /* Unicast RX Frame Count                               */
134#define MulticastFramesReceivedOK       EMAC_RXC_MULTI     /* Multicast RX Frame Count                             */
135#define BroadcastFramesReceivedOK       EMAC_RXC_BROAD     /* Broadcast RX Frame Count                             */
136#define InRangeLengthErrors             EMAC_RXC_LNERRI    /* RX Frame In Range Error Count                        */
137#define OutOfRangeLengthField           EMAC_RXC_LNERRO    /* RX Frame Out Of Range Error Count                    */
138#define FrameTooLongErrors              EMAC_RXC_LONG      /* RX Frame Too Long Count                              */
139#define MACControlFramesReceived        EMAC_RXC_MACCTL    /* MAC Control RX Frame Count                           */
140#define UnsupportedOpcodesReceived      EMAC_RXC_OPCODE    /* Unsupported Op-Code RX Frame Count                   */
141#define PAUSEMACCtrlFramesReceived      EMAC_RXC_PAUSE     /* MAC Control Pause RX Frame Count                     */
142#define FramesReceivedAll               EMAC_RXC_ALLFRM    /* Overall RX Frame Count                               */
143#define OctetsReceivedAll               EMAC_RXC_ALLOCT    /* Overall RX Octet Count                               */
144#define TypedFramesReceived             EMAC_RXC_TYPED     /* Type/Length Consistent RX Frame Count                */
145#define FramesLenLt64Received           EMAC_RXC_SHORT     /* RX Frame Fragment Count - Byte Count x < 64          */
146#define FramesLenEq64Received           EMAC_RXC_EQ64      /* Good RX Frame Count - Byte Count x = 64              */
147#define FramesLen65_127Received         EMAC_RXC_LT128     /* Good RX Frame Count - Byte Count  64 < x < 128       */
148#define FramesLen128_255Received        EMAC_RXC_LT256     /* Good RX Frame Count - Byte Count 128 <= x < 256      */
149#define FramesLen256_511Received        EMAC_RXC_LT512     /* Good RX Frame Count - Byte Count 256 <= x < 512      */
150#define FramesLen512_1023Received       EMAC_RXC_LT1024    /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
151#define FramesLen1024_MaxReceived       EMAC_RXC_GE1024    /* Good RX Frame Count - Byte Count x >= 1024           */
152
153#define FramesTransmittedOK             EMAC_TXC_OK        /* TX Frame Successful Count                            */
154#define SingleCollisionFrames           EMAC_TXC_1COL      /* TX Frames Successful After Single Collision Count    */
155#define MultipleCollisionFrames         EMAC_TXC_GT1COL    /* TX Frames Successful After Multiple Collisions Count */
156#define OctetsTransmittedOK             EMAC_TXC_OCTET     /* TX Octets Successfully Received Count                */
157#define FramesWithDeferredXmissions     EMAC_TXC_DEFER     /* TX Frame Delayed Due To Busy Count                   */
158#define LateCollisions                  EMAC_TXC_LATECL    /* Late TX Collisions Count                             */
159#define FramesAbortedDueToXSColls       EMAC_TXC_XS_COL    /* TX Frame Failed Due To Excessive Collisions Count    */
160#define FramesLostDueToIntMacXmitError  EMAC_TXC_DMAUND    /* Internal MAC Sublayer Error TX Frame Count           */
161#define CarrierSenseErrors              EMAC_TXC_CRSERR    /* Carrier Sense Deasserted During TX Frame Count       */
162#define UnicastFramesXmittedOK          EMAC_TXC_UNICST    /* Unicast TX Frame Count                               */
163#define MulticastFramesXmittedOK        EMAC_TXC_MULTI     /* Multicast TX Frame Count                             */
164#define BroadcastFramesXmittedOK        EMAC_TXC_BROAD     /* Broadcast TX Frame Count                             */
165#define FramesWithExcessiveDeferral     EMAC_TXC_XS_DFR    /* TX Frames With Excessive Deferral Count              */
166#define MACControlFramesTransmitted     EMAC_TXC_MACCTL    /* MAC Control TX Frame Count                           */
167#define FramesTransmittedAll            EMAC_TXC_ALLFRM    /* Overall TX Frame Count                               */
168#define OctetsTransmittedAll            EMAC_TXC_ALLOCT    /* Overall TX Octet Count                               */
169#define FramesLenEq64Transmitted        EMAC_TXC_EQ64      /* Good TX Frame Count - Byte Count x = 64              */
170#define FramesLen65_127Transmitted      EMAC_TXC_LT128     /* Good TX Frame Count - Byte Count  64 < x < 128       */
171#define FramesLen128_255Transmitted     EMAC_TXC_LT256     /* Good TX Frame Count - Byte Count 128 <= x < 256      */
172#define FramesLen256_511Transmitted     EMAC_TXC_LT512     /* Good TX Frame Count - Byte Count 256 <= x < 512      */
173#define FramesLen512_1023Transmitted    EMAC_TXC_LT1024    /* Good TX Frame Count - Byte Count 512 <= x < 1024     */
174#define FramesLen1024_MaxTransmitted    EMAC_TXC_GE1024    /* Good TX Frame Count - Byte Count x >= 1024           */
175#define TxAbortedFrames                 EMAC_TXC_ABORT     /* Total TX Frames Aborted Count                        */
176
177
178/* RSI Registers */
179
180#define RSI_PWR_CONTROL                 0xFFC03800              /* RSI Power Control Register */
181/* legacy register name (below) provided for backwards code compatibility */
182#define SDH_PWR_CTL                     RSI_PWR_CONTROL /* SDH Power Control */
183#define RSI_CLK_CONTROL                 0xFFC03804              /* RSI Clock Control Register */
184/* legacy register name (below) provided for backwards code compatibility */
185#define SDH_CLK_CTL                     RSI_CLK_CONTROL /* SDH Clock Control */
186#define RSI_ARGUMENT                    0xFFC03808              /* RSI Argument Register */
187/* legacy register name (below) provided for backwards code compatibility */
188#define SDH_ARGUMENT                    RSI_ARGUMENT    /* SDH Argument */
189#define RSI_COMMAND                     0xFFC0380C              /* RSI Command Register */
190/* legacy register name (below) provided for backwards code compatibility */
191#define SDH_COMMAND                     RSI_COMMAND             /* SDH Command */
192#define RSI_RESP_CMD                    0xFFC03810              /* RSI Response Command Register */
193/* legacy register name (below) provided for backwards code compatibility */
194#define SDH_RESP_CMD                    RSI_RESP_CMD            /* SDH Response Command */
195#define RSI_RESPONSE0                   0xFFC03814              /* RSI Response Register */
196/* legacy register name (below) provided for backwards code compatibility */
197#define SDH_RESPONSE0                   RSI_RESPONSE0           /* SDH Response0 */
198#define RSI_RESPONSE1                   0xFFC03818              /* RSI Response Register */
199/* legacy register name (below) provided for backwards code compatibility */
200#define SDH_RESPONSE1                   RSI_RESPONSE1           /* SDH Response1 */
201#define RSI_RESPONSE2                   0xFFC0381C      /* RSI Response Register */
202/* legacy register name (below) provided for backwards code compatibility */
203#define SDH_RESPONSE2                   RSI_RESPONSE2           /* SDH Response2 */
204#define RSI_RESPONSE3                   0xFFC03820              /* RSI Response Register */
205/* legacy register name (below) provided for backwards code compatibility */
206#define SDH_RESPONSE3                   RSI_RESPONSE3           /* SDH Response3 */
207#define RSI_DATA_TIMER                  0xFFC03824              /* RSI Data Timer Register */
208/* legacy register name (below) provided for backwards code compatibility */
209#define SDH_DATA_TIMER                  RSI_DATA_TIMER          /* SDH Data Timer */
210#define RSI_DATA_LGTH                   0xFFC03828              /* RSI Data Length Register */
211/* legacy register name (below) provided for backwards code compatibility */
212#define SDH_DATA_LGTH                   RSI_DATA_LGTH           /* SDH Data Length */
213#define RSI_DATA_CONTROL                0xFFC0382C              /* RSI Data Control Register */
214/* legacy register name (below) provided for backwards code compatibility */
215#define SDH_DATA_CTL                    RSI_DATA_CONTROL        /* SDH Data Control */
216#define RSI_DATA_CNT                    0xFFC03830              /* RSI Data Counter Register */
217/* legacy register name (below) provided for backwards code compatibility */
218#define SDH_DATA_CNT                    RSI_DATA_CNT            /* SDH Data Counter */
219#define RSI_STATUS                      0xFFC03834              /* RSI Status Register */
220/* legacy register name (below) provided for backwards code compatibility */
221#define SDH_STATUS                      RSI_STATUS              /* SDH Status */
222#define RSI_STATUSCL                    0xFFC03838              /* RSI Status Clear Register */
223/* legacy register name (below) provided for backwards code compatibility */
224#define SDH_STATUS_CLR                  RSI_STATUSCL            /* SDH Status Clear */
225#define RSI_MASK0                               0xFFC0383C              /* RSI Interrupt 0 Mask Register */
226/* legacy register name (below) provided for backwards code compatibility */
227#define SDH_MASK0                       RSI_MASK0               /* SDH Interrupt0 Mask */
228#define RSI_MASK1                               0xFFC03840              /* RSI Interrupt 1 Mask Register */
229/* legacy register name (below) provided for backwards code compatibility */
230#define SDH_MASK1                       RSI_MASK1               /* SDH Interrupt1 Mask */
231#define RSI_FIFO_CNT                    0xFFC03848              /* RSI FIFO Counter Register */
232/* legacy register name (below) provided for backwards code compatibility */
233#define SDH_FIFO_CNT                    RSI_FIFO_CNT            /* SDH FIFO Counter */
234#define RSI_CEATA_CONTROL               0xFFC0384C              /* RSI CEATA Register */
235#define RSI_FIFO                                0xFFC03880              /* RSI Data FIFO Register */
236/* legacy register name (below) provided for backwards code compatibility */
237#define SDH_FIFO                        RSI_FIFO                /* SDH Data FIFO */
238#define RSI_ESTAT                               0xFFC038C0              /* RSI Exception Status Register */
239/* legacy register name (below) provided for backwards code compatibility */
240#define SDH_E_STATUS                    RSI_ESTAT               /* SDH Exception Status */
241#define RSI_EMASK                               0xFFC038C4              /* RSI Exception Mask Register */
242/* legacy register name (below) provided for backwards code compatibility */
243#define SDH_E_MASK                      RSI_EMASK               /* SDH Exception Mask */
244#define RSI_CONFIG                      0xFFC038C8              /* RSI Configuration Register */
245/* legacy register name (below) provided for backwards code compatibility */
246#define SDH_CFG                                 RSI_CONFIG              /* SDH Configuration */
247#define RSI_RD_WAIT_EN                  0xFFC038CC              /* RSI Read Wait Enable Register */
248/* legacy register name (below) provided for backwards code compatibility */
249#define SDH_RD_WAIT_EN                  RSI_RD_WAIT_EN          /* SDH Read Wait Enable */
250#define RSI_PID0                                0xFFC038D0              /* RSI Peripheral ID Register 0 */
251/* legacy register name (below) provided for backwards code compatibility */
252#define SDH_PID0                        RSI_PID0                /* SDH Peripheral Identification0 */
253#define RSI_PID1                                0xFFC038D4              /* RSI Peripheral ID Register 1 */
254/* legacy register name (below) provided for backwards code compatibility */
255#define SDH_PID1                        RSI_PID1                /* SDH Peripheral Identification1 */
256#define RSI_PID2                                0xFFC038D8              /* RSI Peripheral ID Register 2 */
257/* legacy register name (below) provided for backwards code compatibility */
258#define SDH_PID2                        RSI_PID2                /* SDH Peripheral Identification2 */
259#define RSI_PID3                                0xFFC038DC              /* RSI Peripheral ID Register 3 */
260/* legacy register name (below) provided for backwards code compatibility */
261#define SDH_PID3                        RSI_PID3                /* SDH Peripheral Identification3 */
262/* RSI Registers */
263
264
265
266/***********************************************************************************
267** System MMR Register Bits And Macros
268**
269** Disclaimer:  All macros are intended to make C and Assembly code more readable.
270**                              Use these macros carefully, as any that do left shifts for field
271**                              depositing will result in the lower order bits being destroyed.  Any
272**                              macro that shifts left to properly position the bit-field should be
273**                              used as part of an OR to initialize a register and NOT as a dynamic
274**                              modifier UNLESS the lower order bits are saved and ORed back in when
275**                              the macro is used.
276*************************************************************************************/
277
278/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
279
280/* EMAC_OPMODE Masks */
281
282#define RE                 0x00000001     /* Receiver Enable                                    */
283#define ASTP               0x00000002     /* Enable Automatic Pad Stripping On RX Frames        */
284#define HU                 0x00000010     /* Hash Filter Unicast Address                        */
285#define HM                 0x00000020     /* Hash Filter Multicast Address                      */
286#define PAM                0x00000040     /* Pass-All-Multicast Mode Enable                     */
287#define PR                 0x00000080     /* Promiscuous Mode Enable                            */
288#define IFE                0x00000100     /* Inverse Filtering Enable                           */
289#define DBF                0x00000200     /* Disable Broadcast Frame Reception                  */
290#define PBF                0x00000400     /* Pass Bad Frames Enable                             */
291#define PSF                0x00000800     /* Pass Short Frames Enable                           */
292#define RAF                0x00001000     /* Receive-All Mode                                   */
293#define TE                 0x00010000     /* Transmitter Enable                                 */
294#define DTXPAD             0x00020000     /* Disable Automatic TX Padding                       */
295#define DTXCRC             0x00040000     /* Disable Automatic TX CRC Generation                */
296#define DC                 0x00080000     /* Deferral Check                                     */
297#define BOLMT              0x00300000     /* Back-Off Limit                                     */
298#define BOLMT_10           0x00000000     /*            10-bit range                            */
299#define BOLMT_8            0x00100000     /*            8-bit range                             */
300#define BOLMT_4            0x00200000     /*            4-bit range                             */
301#define BOLMT_1            0x00300000     /*            1-bit range                             */
302#define DRTY               0x00400000     /* Disable TX Retry On Collision                      */
303#define LCTRE              0x00800000     /* Enable TX Retry On Late Collision                  */
304#define RMII               0x01000000     /* RMII/MII* Mode                                     */
305#define RMII_10            0x02000000     /* Speed Select for RMII Port (10MBit/100MBit*)       */
306#define FDMODE             0x04000000     /* Duplex Mode Enable (Full/Half*)                    */
307#define LB                 0x08000000     /* Internal Loopback Enable                           */
308#define DRO                0x10000000     /* Disable Receive Own Frames (Half-Duplex Mode)      */
309
310/* EMAC_STAADD Masks */
311
312#define STABUSY            0x00000001     /* Initiate Station Mgt Reg Access / STA Busy Stat    */
313#define STAOP              0x00000002     /* Station Management Operation Code (Write/Read*)    */
314#define STADISPRE          0x00000004     /* Disable Preamble Generation                        */
315#define STAIE              0x00000008     /* Station Mgt. Transfer Done Interrupt Enable        */
316#define REGAD              0x000007C0     /* STA Register Address                               */
317#define PHYAD              0x0000F800     /* PHY Device Address                                 */
318
319#ifdef _MISRA_RULES
320#define SET_REGAD(x) (((x)&0x1Fu)<<  6 )   /* Set STA Register Address                           */
321#define SET_PHYAD(x) (((x)&0x1Fu)<< 11 )   /* Set PHY Device Address                             */
322#else
323#define SET_REGAD(x) (((x)&0x1F)<<  6 )   /* Set STA Register Address                           */
324#define SET_PHYAD(x) (((x)&0x1F)<< 11 )   /* Set PHY Device Address                             */
325#endif /* _MISRA_RULES */
326
327/* EMAC_STADAT Mask */
328
329#define STADATA            0x0000FFFF     /* Station Management Data                            */
330
331/* EMAC_FLC Masks */
332
333#define FLCBUSY            0x00000001     /* Send Flow Ctrl Frame / Flow Ctrl Busy Status       */
334#define FLCE               0x00000002     /* Flow Control Enable                                */
335#define PCF                0x00000004     /* Pass Control Frames                                */
336#define BKPRSEN            0x00000008     /* Enable Backpressure                                */
337#define FLCPAUSE           0xFFFF0000     /* Pause Time                                         */
338
339#ifdef _MISRA_RULES
340#define SET_FLCPAUSE(x) (((x)&0xFFFFu)<< 16) /* Set Pause Time                                   */
341#else
342#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time                                   */
343#endif /* _MISRA_RULES */
344
345/* EMAC_WKUP_CTL Masks */
346
347#define CAPWKFRM           0x00000001    /* Capture Wake-Up Frames                              */
348#define MPKE               0x00000002    /* Magic Packet Enable                                 */
349#define RWKE               0x00000004    /* Remote Wake-Up Frame Enable                         */
350#define GUWKE              0x00000008    /* Global Unicast Wake Enable                          */
351#define MPKS               0x00000020    /* Magic Packet Received Status                        */
352#define RWKS               0x00000F00    /* Wake-Up Frame Received Status, Filters 3:0          */
353
354/* EMAC_WKUP_FFCMD Masks */
355
356#define WF0_E              0x00000001    /* Enable Wake-Up Filter 0                              */
357#define WF0_T              0x00000008    /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
358#define WF1_E              0x00000100    /* Enable Wake-Up Filter 1                              */
359#define WF1_T              0x00000800    /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
360#define WF2_E              0x00010000    /* Enable Wake-Up Filter 2                              */
361#define WF2_T              0x00080000    /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
362#define WF3_E              0x01000000    /* Enable Wake-Up Filter 3                              */
363#define WF3_T              0x08000000    /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
364
365/* EMAC_WKUP_FFOFF Masks */
366
367#define WF0_OFF            0x000000FF    /* Wake-Up Filter 0 Pattern Offset                      */
368#define WF1_OFF            0x0000FF00    /* Wake-Up Filter 1 Pattern Offset                      */
369#define WF2_OFF            0x00FF0000    /* Wake-Up Filter 2 Pattern Offset                      */
370#define WF3_OFF            0xFF000000    /* Wake-Up Filter 3 Pattern Offset                      */
371
372#ifdef _MISRA_RULES
373#define SET_WF0_OFF(x) (((x)&0xFFu)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
374#define SET_WF1_OFF(x) (((x)&0xFFu)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
375#define SET_WF2_OFF(x) (((x)&0xFFu)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
376#define SET_WF3_OFF(x) (((x)&0xFFu)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
377#else
378#define SET_WF0_OFF(x) (((x)&0xFF)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
379#define SET_WF1_OFF(x) (((x)&0xFF)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
380#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
381#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
382#endif /* _MISRA_RULES */
383
384/* Set ALL Offsets */
385#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
386
387/* EMAC_WKUP_FFCRC0 Masks */
388
389#define WF0_CRC           0x0000FFFF    /* Wake-Up Filter 0 Pattern CRC                           */
390#define WF1_CRC           0xFFFF0000    /* Wake-Up Filter 1 Pattern CRC                           */
391
392#ifdef _MISRA_RULES
393#define SET_WF0_CRC(x) (((x)&0xFFFFu)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
394#define SET_WF1_CRC(x) (((x)&0xFFFFu)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
395#else
396#define SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
397#define SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
398#endif /* _MISRA_RULES */
399
400/* EMAC_WKUP_FFCRC1 Masks */
401
402#define WF2_CRC           0x0000FFFF    /* Wake-Up Filter 2 Pattern CRC                           */
403#define WF3_CRC           0xFFFF0000    /* Wake-Up Filter 3 Pattern CRC                           */
404
405#ifdef _MISRA_RULES
406#define SET_WF2_CRC(x) (((x)&0xFFFFu)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
407#define SET_WF3_CRC(x) (((x)&0xFFFFu)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
408#else
409#define SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
410#define SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
411#endif /* _MISRA_RULES */
412
413/* EMAC_SYSCTL Masks */
414
415#define PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
416#define RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
417#define RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
418#define MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
419
420#ifdef _MISRA_RULES
421#define SET_MDCDIV(x) (((x)&0x3Fu)<< 8)   /* Set MDC Clock Divisor                                 */
422#else
423#define SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
424#endif /* _MISRA_RULES */
425
426/* EMAC_SYSTAT Masks */
427
428#define PHYINT            0x00000001    /* PHY_INT Interrupt Status                               */
429#define MMCINT            0x00000002    /* MMC Counter Interrupt Status                           */
430#define RXFSINT           0x00000004    /* RX Frame-Status Interrupt Status                       */
431#define TXFSINT           0x00000008    /* TX Frame-Status Interrupt Status                       */
432#define WAKEDET           0x00000010    /* Wake-Up Detected Status                                */
433#define RXDMAERR          0x00000020    /* RX DMA Direction Error Status                          */
434#define TXDMAERR          0x00000040    /* TX DMA Direction Error Status                          */
435#define STMDONE           0x00000080    /* Station Mgt. Transfer Done Interrupt Status            */
436
437/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
438
439#define RX_FRLEN          0x000007FF    /* Frame Length In Bytes                                  */
440#define RX_COMP           0x00001000    /* RX Frame Complete                                      */
441#define RX_OK             0x00002000    /* RX Frame Received With No Errors                       */
442#define RX_LONG           0x00004000    /* RX Frame Too Long Error                                */
443#define RX_ALIGN          0x00008000    /* RX Frame Alignment Error                               */
444#define RX_CRC            0x00010000    /* RX Frame CRC Error                                     */
445#define RX_LEN            0x00020000    /* RX Frame Length Error                                  */
446#define RX_FRAG           0x00040000    /* RX Frame Fragment Error                                */
447#define RX_ADDR           0x00080000    /* RX Frame Address Filter Failed Error                   */
448#define RX_DMAO           0x00100000    /* RX Frame DMA Overrun Error                             */
449#define RX_PHY            0x00200000    /* RX Frame PHY Error                                     */
450#define RX_LATE           0x00400000    /* RX Frame Late Collision Error                          */
451#define RX_RANGE          0x00800000    /* RX Frame Length Field Out of Range Error               */
452#define RX_MULTI          0x01000000    /* RX Multicast Frame Indicator                           */
453#define RX_BROAD          0x02000000    /* RX Broadcast Frame Indicator                           */
454#define RX_CTL            0x04000000    /* RX Control Frame Indicator                             */
455#define RX_UCTL           0x08000000    /* Unsupported RX Control Frame Indicator                 */
456#define RX_TYPE           0x10000000    /* RX Typed Frame Indicator                               */
457#define RX_VLAN1          0x20000000    /* RX VLAN1 Frame Indicator                               */
458#define RX_VLAN2          0x40000000    /* RX VLAN2 Frame Indicator                               */
459#define RX_ACCEPT         0x80000000    /* RX Frame Accepted Indicator                            */
460
461/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks  */
462
463#define TX_COMP           0x00000001    /* TX Frame Complete                                      */
464#define TX_OK             0x00000002    /* TX Frame Sent With No Errors                           */
465#define TX_ECOLL          0x00000004    /* TX Frame Excessive Collision Error                     */
466#define TX_LATE           0x00000008    /* TX Frame Late Collision Error                          */
467#define TX_DMAU           0x00000010    /* TX Frame DMA Underrun Error (STAT)                     */
468#define TX_MACE           0x00000010    /* Internal MAC Error Detected (STKY and IRQE)            */
469#define TX_EDEFER         0x00000020    /* TX Frame Excessive Deferral Error                      */
470#define TX_BROAD          0x00000040    /* TX Broadcast Frame Indicator                           */
471#define TX_MULTI          0x00000080    /* TX Multicast Frame Indicator                           */
472#define TX_CCNT           0x00000F00    /* TX Frame Collision Count                               */
473#define TX_DEFER          0x00001000    /* TX Frame Deferred Indicator                            */
474#define TX_CRS            0x00002000    /* TX Frame Carrier Sense Not Asserted Error              */
475#define TX_LOSS           0x00004000    /* TX Frame Carrier Lost During TX Error                  */
476#define TX_RETRY          0x00008000    /* TX Frame Successful After Retry                        */
477#define TX_FRLEN          0x07FF0000    /* TX Frame Length (Bytes)                                */
478
479/* EMAC_MMC_CTL Masks */
480#define RSTC              0x00000001    /* Reset All Counters                                     */
481#define CROLL             0x00000002    /* Counter Roll-Over Enable                               */
482#define CCOR              0x00000004    /* Counter Clear-On-Read Mode Enable                      */
483#define MMCE              0x00000008    /* Enable MMC Counter Operation                           */
484
485/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
486#define RX_OK_CNT         0x00000001    /* RX Frames Received With No Errors                      */
487#define RX_FCS_CNT        0x00000002    /* RX Frames W/Frame Check Sequence Errors                */
488#define RX_ALIGN_CNT      0x00000004    /* RX Frames With Alignment Errors                        */
489#define RX_OCTET_CNT      0x00000008    /* RX Octets Received OK                                  */
490#define RX_LOST_CNT       0x00000010    /* RX Frames Lost Due To Internal MAC RX Error            */
491#define RX_UNI_CNT        0x00000020    /* Unicast RX Frames Received OK                          */
492#define RX_MULTI_CNT      0x00000040    /* Multicast RX Frames Received OK                        */
493#define RX_BROAD_CNT      0x00000080    /* Broadcast RX Frames Received OK                        */
494#define RX_IRL_CNT        0x00000100    /* RX Frames With In-Range Length Errors                  */
495#define RX_ORL_CNT        0x00000200    /* RX Frames With Out-Of-Range Length Errors              */
496#define RX_LONG_CNT       0x00000400    /* RX Frames With Frame Too Long Errors                   */
497#define RX_MACCTL_CNT     0x00000800    /* MAC Control RX Frames Received                         */
498#define RX_OPCODE_CTL     0x00001000    /* Unsupported Op-Code RX Frames Received                 */
499#define RX_PAUSE_CNT      0x00002000    /* PAUSEMAC Control RX Frames Received                    */
500#define RX_ALLF_CNT       0x00004000    /* All RX Frames Received                                 */
501#define RX_ALLO_CNT       0x00008000    /* All RX Octets Received                                 */
502#define RX_TYPED_CNT      0x00010000    /* Typed RX Frames Received                               */
503#define RX_SHORT_CNT      0x00020000    /* RX Frame Fragments (< 64 Bytes) Received               */
504#define RX_EQ64_CNT       0x00040000    /* 64-Byte RX Frames Received                             */
505#define RX_LT128_CNT      0x00080000    /* 65-127-Byte RX Frames Received                         */
506#define RX_LT256_CNT      0x00100000    /* 128-255-Byte RX Frames Received                        */
507#define RX_LT512_CNT      0x00200000    /* 256-511-Byte RX Frames Received                        */
508#define RX_LT1024_CNT     0x00400000    /* 512-1023-Byte RX Frames Received                       */
509#define RX_GE1024_CNT     0x00800000    /* 1024-Max-Byte RX Frames Received                       */
510
511/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks  */
512
513#define TX_OK_CNT         0x00000001    /* TX Frames Sent OK                                      */
514#define TX_SCOLL_CNT      0x00000002    /* TX Frames With Single Collisions                       */
515#define TX_MCOLL_CNT      0x00000004    /* TX Frames With Multiple Collisions                     */
516#define TX_OCTET_CNT      0x00000008    /* TX Octets Sent OK                                      */
517#define TX_DEFER_CNT      0x00000010    /* TX Frames With Deferred Transmission                   */
518#define TX_LATE_CNT       0x00000020    /* TX Frames With Late Collisions                         */
519#define TX_ABORTC_CNT     0x00000040    /* TX Frames Aborted Due To Excess Collisions             */
520#define TX_LOST_CNT       0x00000080    /* TX Frames Lost Due To Internal MAC TX Error            */
521#define TX_CRS_CNT        0x00000100    /* TX Frames With Carrier Sense Errors                    */
522#define TX_UNI_CNT        0x00000200    /* Unicast TX Frames Sent                                 */
523#define TX_MULTI_CNT      0x00000400    /* Multicast TX Frames Sent                               */
524#define TX_BROAD_CNT      0x00000800    /* Broadcast TX Frames Sent                               */
525#define TX_EXDEF_CTL      0x00001000    /* TX Frames With Excessive Deferral                      */
526#define TX_MACCTL_CNT     0x00002000    /* MAC Control TX Frames Sent                             */
527#define TX_ALLF_CNT       0x00004000    /* All TX Frames Sent                                     */
528#define TX_ALLO_CNT       0x00008000    /* All TX Octets Sent                                     */
529#define TX_EQ64_CNT       0x00010000    /* 64-Byte TX Frames Sent                                 */
530#define TX_LT128_CNT      0x00020000    /* 65-127-Byte TX Frames Sent                             */
531#define TX_LT256_CNT      0x00040000    /* 128-255-Byte TX Frames Sent                            */
532#define TX_LT512_CNT      0x00080000    /* 256-511-Byte TX Frames Sent                            */
533#define TX_LT1024_CNT     0x00100000    /* 512-1023-Byte TX Frames Sent                           */
534#define TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
535#define TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
536
537
538/* Bit masks for EMAC_PTP_CTL */
539
540#define EMAC_PTP_CTL_EN  0x1              /* Block Enable                                                               */
541#define EMAC_PTP_CTL_TL  0x2              /* Time Stamp Lock                                                    */
542#define EMAC_PTP_CTL_CKS         0xC              /* Clock source for the PTP_TSYNC block                               */
543#define EMAC_PTP_CTL_ASEN        0x10             /* Auxiliary Snapshot Enable                                  */
544#define EMAC_PTP_CTL_CKDIV 0x60           /* Divider for the selected PTP_CLK output                    */
545#define EMAC_PTP_CTL_PPSEN 0x80           /* Pulse Per Second (PPS) Enable                                      */
546#define EMAC_PTP_CTL_EFTM        0x100    /* Ethernet Frame type field compare mask                     */
547#define EMAC_PTP_CTL_IPVM        0x200    /* IP Version field compare mask                                      */
548#define EMAC_PTP_CTL_IPTM        0x400    /* IP Type Frame field (Layer 4 protocol) compare mask        */
549#define EMAC_PTP_CTL_UDPEM 0x800          /* UDP Event port field compare mask                          */
550#define EMAC_PTP_CTL_PTPCM 0x1000         /* PTP Control field compare mask                                     */
551#define EMAC_PTP_CTL_CKOEN 0x2000         /* Clock output Enable                                                */
552
553/* Bit masks for EMAC_PTP_IE */
554
555#define EMAC_PTP_IE_ALIE         0x1              /* Alarm Feature and Interrupt Enable                         */
556#define EMAC_PTP_IE_RXEIE        0x2              /* Receive Event Interrupt Enable                                     */
557#define EMAC_PTP_IE_RXGIE        0x4              /* Receive General Interrupt Enable                           */
558#define EMAC_PTP_IE_TXIE         0x8              /* Transmit Interrupt Enable                                  */
559#define EMAC_PTP_IE_TXOVE        0x10             /* Transmit Overrun Error Interrupt Enable                    */
560#define EMAC_PTP_IE_RXOVE        0x20             /* Receive Overrun Error Interrupt Enable                     */
561#define EMAC_PTP_IE_ASIE         0x40             /* Auxiliary Snapshot Interrupt Enable                                */
562
563/* Bit masks for EMAC_PTP_ISTAT */
564
565#define EMAC_PTP_ISTAT_ALS  0x1           /* Alarm Status                                                               */
566#define EMAC_PTP_ISTAT_RXEL 0x2           /* Receive Event Interrupt Locked                                     */
567#define EMAC_PTP_ISTAT_RXGL 0x4           /* Receive General Interrupt Locked                           */
568#define EMAC_PTP_ISTAT_TXTL 0x8           /* Transmit Snapshot Locked                                           */
569#define EMAC_PTP_ISTAT_RXOV 0x10          /* Receive Snapshot Overrun Status                            */
570#define EMAC_PTP_ISTAT_TXOV 0x20          /* Transmit snapshot Overrun Status                           */
571#define EMAC_PTP_ISTAT_ASL  0x40          /* Auxiliary Snapshot Interrupt Status                                */
572
573
574/* Bit masks for RSI_PWR_CONTROL */
575#define                    PWR_ON  0x3                  /* Power On */
576#define                RSI_CMD_OD  0x40                 /* Open Drain Output */
577/* legacy bit mask (below) provided for backwards code compatibility */
578#define                 SD_CMD_OD  RSI_CMD_OD           /* Open Drain Output */
579/* legacy bit mask (below) provided for backwards code compatibility */
580#define                nSD_CMD_OD  0x0
581/* legacy bit mask (below) provided for backwards code compatibility */
582#if 0
583#define                       TBD  0x3c                 /* TBD */
584#endif
585/* legacy bit mask (below) provided for backwards code compatibility */
586#define                   ROD_CTL  0x80
587/* legacy bit mask (below) provided for backwards code compatibility */
588#define                  nROD_CTL  0x80
589
590
591/* Bit masks for RSI_CLK_CONTROL */
592#define                    CLKDIV  0xff                 /* MC_CLK Divisor */
593#define                    CLK_EN  0x100                /* MC_CLK Bus Clock Enable */
594/* legacy bit mask (below) provided for backwards code compatibility */
595#define                     CLK_E  CLK_EN               /* MC_CLK Bus Clock Enable */
596/* legacy bit mask (below) provided for backwards code compatibility */
597#define                    nCLK_E  0x0
598#define                 PWR_SV_EN  0x200                /* Power Save Enable */
599/* legacy bit mask (below) provided for backwards code compatibility */
600#define                  PWR_SV_E  PWR_SV_EN            /* Power Save Enable */
601/* legacy bit mask (below) provided for backwards code compatibility */
602#define                 nPWR_SV_E  0x0
603#define             CLKDIV_BYPASS  0x400                /* Bypass Divisor */
604/* legacy bit mask (below) provided for backwards code compatibility */
605#define            nCLKDIV_BYPASS  0x0
606#define                  BUS_MODE  0x1800           /* Bus width selection */
607/* legacy bit mask (below) provided for backwards code compatibility */
608#define                  WIDE_BUS  0x0800       /* Wide Bus Mode Enable */
609/* legacy bit mask (below) provided for backwards code compatibility */
610#define                 nWIDE_BUS  0x0
611
612
613/* Bit masks for RSI_COMMAND */
614#define                   CMD_IDX  0x3f                 /* Command Index */
615#define                CMD_RSP_EN  0x40                 /* Response */
616/* legacy bit mask (below) provided for backwards code compatibility */
617#define                   CMD_RSP  CMD_RSP_EN           /* Response */
618/* legacy bit mask (below) provided for backwards code compatibility */
619#define                  nCMD_RSP  0x0
620#define               CMD_LRSP_EN  0x80                 /* Long Response */
621/* legacy bit mask (below) provided for backwards code compatibility */
622#define                 CMD_L_RSP  CMD_LRSP_EN          /* Long Response */
623/* legacy bit mask (below) provided for backwards code compatibility */
624#define                nCMD_L_RSP  0x0
625#define                CMD_INT_EN  0x100                /* Command Interrupt */
626/* legacy bit mask (below) provided for backwards code compatibility */
627#define                 CMD_INT_E  CMD_INT_EN           /* Command Interrupt */
628/* legacy bit mask (below) provided for backwards code compatibility */
629#define                nCMD_INT_E  0x0
630#define               CMD_PEND_EN  0x200                /* Command Pending */
631/* legacy bit mask (below) provided for backwards code compatibility */
632#define                CMD_PEND_E  CMD_PEND_EN          /* Command Pending */
633/* legacy bit mask (below) provided for backwards code compatibility */
634#define               nCMD_PEND_E  0x0
635#define                    CMD_EN  0x400                        /* Command Enable */
636/* legacy bit mask (below) provided for backwards code compatibility */
637#define                     CMD_E  CMD_EN               /* Command Enable */
638/* legacy bit mask (below) provided for backwards code compatibility */
639#define                    nCMD_E  0x0
640
641
642/* Bit masks for RSI_RESP_CMD */
643#define                  RESP_CMD  0x3f                 /* Response Command */
644
645/* Bit masks for RSI_DATA_LGTH */
646#define               DATA_LENGTH  0xffff               /* Data Length */
647
648
649/* Bit masks for RSI_DATA_CONTROL */
650#define                   DATA_EN  0x1                  /* Data Transfer Enable */
651/* legacy bit mask (below) provided for backwards code compatibility */
652#define                     DTX_E  DATA_EN              /* Data Transfer Enable */
653/* legacy bit mask (below) provided for backwards code compatibility */
654#define                    nDTX_E  0x0
655#define                  DATA_DIR  0x2                  /* Data Transfer Direction */
656/* legacy bit mask (below) provided for backwards code compatibility */
657#define                   DTX_DIR  DATA_DIR             /* Data Transfer Direction */
658/* legacy bit mask (below) provided for backwards code compatibility */
659#define                  nDTX_DIR  0x0
660#define                 DATA_MODE  0x4                  /* Data Transfer Mode */
661/* legacy bit mask (below) provided for backwards code compatibility */
662#define                  DTX_MODE  DATA_MODE            /* Data Transfer Mode */
663/* legacy bit mask (below) provided for backwards code compatibility */
664#define                 nDTX_MODE  0x0
665#define               DATA_DMA_EN  0x8                  /* Data Transfer DMA Enable */
666/* legacy bit mask (below) provided for backwards code compatibility */
667#define                 DTX_DMA_E  0x8                  /* Data Transfer DMA Enable */
668/* legacy bit mask (below) provided for backwards code compatibility */
669#define                nDTX_DMA_E  0x0
670#define             DATA_BLK_LGTH  0xf0                 /* Data Transfer Block Length */
671/* legacy bit mask (below) provided for backwards code compatibility */
672#define              DTX_BLK_LGTH  0xf0                 /* Data Transfer Block Length */
673#define                              CEATA_EN  0x100          /* CE-ATA operation mode enable */
674#define                          CEATA_CCS_EN  0x200          /* CE-ATA CCS mode enable */
675
676/* Bit masks for RSI_DATA_CNT */
677#define               DATA_COUNT  0xffff                /* Data Count */
678
679/* Bit masks for RSI_STATUS */
680#define              CMD_CRC_FAIL  0x1                  /* CMD CRC Fail */
681/* legacy bit mask (below) provided for backwards code compatibility */
682#define             nCMD_CRC_FAIL  0x0
683#define              DAT_CRC_FAIL  0x2                  /* Data CRC Fail */
684/* legacy bit mask (below) provided for backwards code compatibility */
685#define             nDAT_CRC_FAIL  0x0
686#define               CMD_TIMEOUT  0x4                  /* CMD Time Out */
687/* legacy bit mask (below) provided for backwards code compatibility */
688#define              nCMD_TIMEOUT  0x0
689#define               DAT_TIMEOUT  0x8                  /* Data Time Out */
690/* legacy bit mask (below) provided for backwards code compatibility */
691#define              nDAT_TIMEOUT  0x0
692#define               TX_UNDERRUN  0x10                 /* Transmit Underrun */
693/* legacy bit mask (below) provided for backwards code compatibility */
694#define              nTX_UNDERRUN  0x0
695#define                RX_OVERRUN  0x20                 /* Receive Overrun */
696/* legacy bit mask (below) provided for backwards code compatibility */
697#define               nRX_OVERRUN  0x0
698#define              CMD_RESP_END  0x40                 /* CMD Response End */
699/* legacy bit mask (below) provided for backwards code compatibility */
700#define             nCMD_RESP_END  0x0
701#define                  CMD_SENT  0x80                 /* CMD Sent */
702/* legacy bit mask (below) provided for backwards code compatibility */
703#define                 nCMD_SENT  0x0
704#define                   DAT_END  0x100                /* Data End */
705/* legacy bit mask (below) provided for backwards code compatibility */
706#define                  nDAT_END  0x0
707#define             START_BIT_ERR  0x200                /* Start Bit Error */
708/* legacy bit mask (below) provided for backwards code compatibility */
709#define            nSTART_BIT_ERR  0x0
710#define               DAT_BLK_END  0x400                /* Data Block End */
711/* legacy bit mask (below) provided for backwards code compatibility */
712#define              nDAT_BLK_END  0x0
713#define                   CMD_ACT  0x800                /* CMD Active */
714/* legacy bit mask (below) provided for backwards code compatibility */
715#define                  nCMD_ACT  0x0
716#define                    TX_ACT  0x1000               /* Transmit Active */
717/* legacy bit mask (below) provided for backwards code compatibility */
718#define                   nTX_ACT  0x0
719#define                    RX_ACT  0x2000               /* Receive Active */
720/* legacy bit mask (below) provided for backwards code compatibility */
721#define                   nRX_ACT  0x0
722#define              TX_FIFO_STAT  0x4000               /* Transmit FIFO Status */
723/* legacy bit mask (below) provided for backwards code compatibility */
724#define             nTX_FIFO_STAT  0x0
725#define              RX_FIFO_STAT  0x8000               /* Receive FIFO Status */
726/* legacy bit mask (below) provided for backwards code compatibility */
727#define             nRX_FIFO_STAT  0x0
728#define              TX_FIFO_FULL  0x10000              /* Transmit FIFO Full */
729/* legacy bit mask (below) provided for backwards code compatibility */
730#define             nTX_FIFO_FULL  0x0
731#define              RX_FIFO_FULL  0x20000              /* Receive FIFO Full */
732/* legacy bit mask (below) provided for backwards code compatibility */
733#define             nRX_FIFO_FULL  0x0
734#define              TX_FIFO_ZERO  0x40000              /* Transmit FIFO Empty */
735/* legacy bit mask (below) provided for backwards code compatibility */
736#define             nTX_FIFO_ZERO  0x0
737#define               RX_DAT_ZERO  0x80000              /* Receive FIFO Empty */
738/* legacy bit mask (below) provided for backwards code compatibility */
739#define              nRX_DAT_ZERO  0x0
740#define                TX_DAT_RDY  0x100000             /* Transmit Data Available */
741/* legacy bit mask (below) provided for backwards code compatibility */
742#define               nTX_DAT_RDY  0x0
743#define               RX_FIFO_RDY  0x200000             /* Receive Data Available */
744/* legacy bit mask (below) provided for backwards code compatibility */
745#define              nRX_FIFO_RDY  0x0
746
747/* Bit masks for RSI_STATCL */
748
749#define         CMD_CRC_FAIL_STAT  0x1                  /* CMD CRC Fail Status */
750/* legacy bit mask (below) provided for backwards code compatibility */
751#define        nCMD_CRC_FAIL_STAT  0x0
752#define         DAT_CRC_FAIL_STAT  0x2                  /* Data CRC Fail Status */
753/* legacy bit mask (below) provided for backwards code compatibility */
754#define        nDAT_CRC_FAIL_STAT  0x0
755#define          CMD_TIMEOUT_STAT  0x4                  /* CMD Time Out Status */
756/* legacy bit mask (below) provided for backwards code compatibility */
757#define         nCMD_TIMEOUT_STAT  0x0
758#define          DAT_TIMEOUT_STAT  0x8                  /* Data Time Out status */
759/* legacy bit mask (below) provided for backwards code compatibility */
760#define         nDAT_TIMEOUT_STAT  0x0
761#define          TX_UNDERRUN_STAT  0x10                 /* Transmit Underrun Status */
762/* legacy bit mask (below) provided for backwards code compatibility */
763#define         nTX_UNDERRUN_STAT  0x0
764#define           RX_OVERRUN_STAT  0x20                 /* Receive Overrun Status */
765/* legacy bit mask (below) provided for backwards code compatibility */
766#define          nRX_OVERRUN_STAT  0x0
767#define         CMD_RESP_END_STAT  0x40                 /* CMD Response End Status */
768/* legacy bit mask (below) provided for backwards code compatibility */
769#define        nCMD_RESP_END_STAT  0x0
770#define             CMD_SENT_STAT  0x80                 /* CMD Sent Status */
771/* legacy bit mask (below) provided for backwards code compatibility */
772#define            nCMD_SENT_STAT  0x0
773#define              DAT_END_STAT  0x100                /* Data End Status */
774/* legacy bit mask (below) provided for backwards code compatibility */
775#define             nDAT_END_STAT  0x0
776#define        START_BIT_ERR_STAT  0x200                /* Start Bit Error Status */
777/* legacy bit mask (below) provided for backwards code compatibility */
778#define       nSTART_BIT_ERR_STAT  0x0
779#define          DAT_BLK_END_STAT  0x400                /* Data Block End Status */
780/* legacy bit mask (below) provided for backwards code compatibility */
781#define         nDAT_BLK_END_STAT  0x0
782
783/* Bit masks for RSI_MASKx */
784
785#define         CMD_CRC_FAIL_MASK  0x1                  /* CMD CRC Fail Mask */
786/* legacy bit mask (below) provided for backwards code compatibility */
787#define        nCMD_CRC_FAIL_MASK  0x0
788#define         DAT_CRC_FAIL_MASK  0x2                  /* Data CRC Fail Mask */
789/* legacy bit mask (below) provided for backwards code compatibility */
790#define        nDAT_CRC_FAIL_MASK  0x0
791#define          CMD_TIMEOUT_MASK  0x4                  /* CMD Time Out Mask */
792/* legacy bit mask (below) provided for backwards code compatibility */
793#define         nCMD_TIMEOUT_MASK  0x0
794#define          DAT_TIMEOUT_MASK  0x8                  /* Data Time Out Mask */
795/* legacy bit mask (below) provided for backwards code compatibility */
796#define         nDAT_TIMEOUT_MASK  0x0
797#define          TX_UNDERRUN_MASK  0x10                 /* Transmit Underrun Mask */
798/* legacy bit mask (below) provided for backwards code compatibility */
799#define         nTX_UNDERRUN_MASK  0x0
800#define           RX_OVERRUN_MASK  0x20                 /* Receive Overrun Mask */
801/* legacy bit mask (below) provided for backwards code compatibility */
802#define          nRX_OVERRUN_MASK  0x0
803#define         CMD_RESP_END_MASK  0x40                 /* CMD Response End Mask */
804/* legacy bit mask (below) provided for backwards code compatibility */
805#define        nCMD_RESP_END_MASK  0x0
806#define             CMD_SENT_MASK  0x80                 /* CMD Sent Mask */
807/* legacy bit mask (below) provided for backwards code compatibility */
808#define            nCMD_SENT_MASK  0x0
809#define              DAT_END_MASK  0x100                /* Data End Mask */
810/* legacy bit mask (below) provided for backwards code compatibility */
811#define             nDAT_END_MASK  0x0
812#define        START_BIT_ERR_MASK  0x200                /* Start Bit Error Mask */
813/* legacy bit mask (below) provided for backwards code compatibility */
814#define       nSTART_BIT_ERR_MASK  0x0
815#define          DAT_BLK_END_MASK  0x400                /* Data Block End Mask */
816/* legacy bit mask (below) provided for backwards code compatibility */
817#define         nDAT_BLK_END_MASK  0x0
818#define              CMD_ACT_MASK  0x800                /* CMD Active Mask */
819/* legacy bit mask (below) provided for backwards code compatibility */
820#define             nCMD_ACT_MASK  0x0
821#define               TX_ACT_MASK  0x1000               /* Transmit Active Mask */
822/* legacy bit mask (below) provided for backwards code compatibility */
823#define              nTX_ACT_MASK  0x0
824#define               RX_ACT_MASK  0x2000               /* Receive Active Mask */
825/* legacy bit mask (below) provided for backwards code compatibility */
826#define              nRX_ACT_MASK  0x0
827#define         TX_FIFO_STAT_MASK  0x4000               /* Transmit FIFO Status Mask */
828/* legacy bit mask (below) provided for backwards code compatibility */
829#define        nTX_FIFO_STAT_MASK  0x0
830#define         RX_FIFO_STAT_MASK  0x8000               /* Receive FIFO Status Mask */
831/* legacy bit mask (below) provided for backwards code compatibility */
832#define        nRX_FIFO_STAT_MASK  0x0
833#define         TX_FIFO_FULL_MASK  0x10000              /* Transmit FIFO Full Mask */
834/* legacy bit mask (below) provided for backwards code compatibility */
835#define        nTX_FIFO_FULL_MASK  0x0
836#define         RX_FIFO_FULL_MASK  0x20000              /* Receive FIFO Full Mask */
837/* legacy bit mask (below) provided for backwards code compatibility */
838#define        nRX_FIFO_FULL_MASK  0x0
839#define         TX_FIFO_ZERO_MASK  0x40000              /* Transmit FIFO Empty Mask */
840/* legacy bit mask (below) provided for backwards code compatibility */
841#define        nTX_FIFO_ZERO_MASK  0x0
842#define          RX_DAT_ZERO_MASK  0x80000              /* Receive FIFO Empty Mask */
843/* legacy bit mask (below) provided for backwards code compatibility */
844#define         nRX_DAT_ZERO_MASK  0x0
845#define           TX_DAT_RDY_MASK  0x100000             /* Transmit Data Available Mask */
846/* legacy bit mask (below) provided for backwards code compatibility */
847#define          nTX_DAT_RDY_MASK  0x0
848#define          RX_FIFO_RDY_MASK  0x200000             /* Receive Data Available Mask */
849/* legacy bit mask (below) provided for backwards code compatibility */
850#define         nRX_FIFO_RDY_MASK  0x0
851
852/* Bit masks for RSI_FIFO_CNT */
853#define                FIFO_COUNT  0x7fff               /* FIFO Count */
854
855/* Bit masks for RSI_CEATA_CONTROL */
856#define           CEATA_TX_CCSD  0x1                    /* Send CE-ATA CCSD sequence */
857
858/* Bit masks for RSI_ESTAT */
859#define              SDIO_INT_DET  0x2                  /* SDIO Int Detected */
860/* legacy bit mask (below) provided for backwards code compatibility */
861#define             nSDIO_INT_DET  0x0
862#define               SD_CARD_DET  0x10                 /* SD Card Detect */
863/* legacy bit mask (below) provided for backwards code compatibility */
864#define              nSD_CARD_DET  0x0
865#define             CEATA_INT_DET  0x20
866
867/* Bit masks for RSI_EMASK */
868#define         SDIO_INT_DET_MASK  0x2                /* Mask SDIO Int Detected */
869/* legacy bit mask (below) provided for backwards code compatibility */
870#define                  SDIO_MSK  SDIO_INT_DET_MASK  /* Mask SDIO Int Detected */
871/* legacy bit mask (below) provided for backwards code compatibility */
872#define                 nSDIO_MSK  0x0
873#define          SD_CARD_DET_MASK  0x10               /* Mask Card Detect */
874/* legacy bit mask (below) provided for backwards code compatibility */
875#define                  SCD_MASK  SD_CARD_DET_MASK   /* Mask Card Detect */
876/* legacy bit mask (below) provided for backwards code compatibility */
877#define                  nSCD_MSK  0x0
878#define        CEATA_INT_DET_MASK  0x20
879
880
881/* Bit masks for SDH_CFG */
882
883/* Left in for backwards compatibility */
884#define                RSI_CLK_EN  0x1
885/* legacy bit mask (below) provided for backwards code compatibility */
886#define                   CLKS_EN  RSI_CLK_EN           /* Clocks Enable */
887/* legacy bit mask (below) provided for backwards code compatibility */
888#define                  nCLKS_EN  0x0
889#define                  SDIO4_EN  0x4                  /* SDIO 4-Bit Enable */
890/* legacy bit mask (below) provided for backwards code compatibility */
891#define                      SD4E  SDIO4_EN             /* SDIO 4-Bit Enable */
892/* legacy bit mask (below) provided for backwards code compatibility */
893#define                     nSD4E  0x0
894#define                     MW_EN  0x8                  /* Moving Window Enable */
895/* legacy bit mask (below) provided for backwards code compatibility */
896#define                       MWE  MW_EN                /* Moving Window Enable */
897/* legacy bit mask (below) provided for backwards code compatibility */
898#define                      nMWE  0x0
899#define                   RSI_RST  0x10                 /* SDMMC Reset */
900/* legacy bit mask (below) provided for backwards code compatibility */
901#define                    SD_RST  RSI_RST              /* SDMMC Reset */
902/* legacy bit mask (below) provided for backwards code compatibility */
903#define                   nSD_RST  0x0
904#define                    PU_DAT  0x20                 /* Pull-up SD_DAT */
905/* legacy bit mask (below) provided for backwards code compatibility */
906#define                 PUP_SDDAT  PU_DAT               /* Pull-up SD_DAT */
907/* legacy bit mask (below) provided for backwards code compatibility */
908#define                nPUP_SDDAT  0x0
909#define                   PU_DAT3  0x40                 /* Pull-up SD_DAT3 */
910/* legacy bit mask (below) provided for backwards code compatibility */
911#define                PUP_SDDAT3  PU_DAT3              /* Pull-up SD_DAT3 */
912/* legacy bit mask (below) provided for backwards code compatibility */
913#define               nPUP_SDDAT3  0x0
914#define                   PD_DAT3  0x80                 /* Pull-down SD_DAT3 */
915/* legacy bit mask (below) provided for backwards code compatibility */
916#define                 PD_SDDAT3  PD_DAT3              /* Pull-down SD_DAT3 */
917/* legacy bit mask (below) provided for backwards code compatibility */
918#define                nPD_SDDAT3  0x0
919
920
921/* Bit masks for RSI_RD_WAIT_EN */
922#define                  SDIO_RWR  0x1                  /* Read Wait Request */
923/* legacy bit mask (below) provided for backwards code compatibility */
924#define                       RWR  SDIO_RWR             /* Read Wait Request */
925/* legacy bit mask (below) provided for backwards code compatibility */
926#define                      nRWR  0x0
927
928/* Bit masks for RSI_PIDx */
929#define                   RSI_PID  0xff                 /* RSI Peripheral ID */
930
931
932#ifdef _MISRA_RULES
933#pragma diag(pop)
934#endif /* _MISRA_RULES */
935
936#endif /* _DEF_BF516_H */
Note: See TracBrowser for help on using the repository browser.