source: trunk/libs/newlib/src/libgloss/bfin/include/defBF532.h @ 444

Last change on this file since 444 was 444, checked in by satin@…, 6 years ago

add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc
File size: 80.3 KB
Line 
1/*
2 * The authors hereby grant permission to use, copy, modify, distribute,
3 * and license this software and its documentation for any purpose, provided
4 * that existing copyright notices are retained in all copies and that this
5 * notice is included verbatim in any distributions. No written agreement,
6 * license, or royalty fee is required for any of the authorized uses.
7 * Modifications to this software may be copyrighted by their authors
8 * and need not follow the licensing terms described here, provided that
9 * the new terms are clearly indicated on the first page of each file where
10 * they apply.
11 */
12
13/************************************************************************
14 *
15 * defBF532.h
16 *
17 * (c) Copyright 2001-2009 Analog Devices, Inc.  All rights reserved.
18 *
19 ************************************************************************/
20
21/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */
22
23#ifndef _DEF_BF532_H
24#define _DEF_BF532_H
25
26#if !defined(__ADSPLPBLACKFIN__)
27#warning defBF532.h should only be included for 532 compatible chips
28#endif
29/* include all Core registers and bit definitions */
30#include <def_LPBlackfin.h>
31
32#ifdef _MISRA_RULES
33#pragma diag(push)
34#pragma diag(suppress:misra_rule_19_4)
35#pragma diag(suppress:misra_rule_19_7)
36#include <stdint.h>
37#endif /* _MISRA_RULES */
38
39/*********************************************************************************** */
40/* System MMR Register Map */
41/*********************************************************************************** */
42/*// Clock/Regulator Control (0xFFC00000 - 0xFFC000FF) */
43
44#define PLL_CTL                 0xFFC00000  /* PLL Control register (16-bit) */
45#define PLL_DIV                 0xFFC00004      /* PLL Divide Register (16-bit) */
46#define VR_CTL                  0xFFC00008      /* Voltage Regulator Control Register (16-bit) */
47#define PLL_STAT                0xFFC0000C  /* PLL Status register (16-bit) */
48#define PLL_LOCKCNT             0xFFC00010  /* PLL Lock Count register (16-bit) */
49#define CHIPID                  0xFFC00014      /* Chip ID Register                                             */
50
51
52/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
53#define SWRST                   0xFFC00100  /* Software Reset Register (16-bit) */
54#define SYSCR                   0xFFC00104  /* System Configuration registe */
55#define SIC_IMASK               0xFFC0010C  /* Interrupt Mask Register */
56#define SIC_IAR0                0xFFC00110  /* Interrupt Assignment Register 0 */
57#define SIC_IAR1                0xFFC00114  /* Interrupt Assignment Register 1 */
58#define SIC_IAR2                0xFFC00118  /* Interrupt Assignment Register 2 */
59#define SIC_ISR                 0xFFC00120  /* Interrupt Status Register */
60#define SIC_IWR                 0xFFC00124  /* Interrupt Wakeup Register */
61
62
63/*// Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
64#define WDOG_CTL        0xFFC00200  /* Watchdog Control Register */
65#define WDOG_CNT        0xFFC00204  /* Watchdog Count Register */
66#define WDOG_STAT       0xFFC00208  /* Watchdog Status Register */
67
68
69/*// Real Time Clock (0xFFC00300 - 0xFFC003FF) */
70#define RTC_STAT        0xFFC00300  /* RTC Status Register */
71#define RTC_ICTL        0xFFC00304  /* RTC Interrupt Control Register */
72#define RTC_ISTAT       0xFFC00308  /* RTC Interrupt Status Register */
73#define RTC_SWCNT       0xFFC0030C  /* RTC Stopwatch Count Register */
74#define RTC_ALARM       0xFFC00310  /* RTC Alarm Time Register */
75#define RTC_FAST        0xFFC00314  /* RTC Prescaler Enable Register */
76#define RTC_PREN                0xFFC00314  /* RTC Prescaler Enable Register (alternate macro) */
77
78
79/* UART Controller (0xFFC00400 - 0xFFC004FF) */
80#define UART_THR             0xFFC00400  /* Transmit Holding register */
81#define UART_RBR             0xFFC00400  /* Receive Buffer register */
82#define UART_DLL             0xFFC00400  /* Divisor Latch (Low-Byte) */
83#define UART_IER             0xFFC00404  /* Interrupt Enable Register */
84#define UART_DLH             0xFFC00404  /* Divisor Latch (High-Byte) */
85#define UART_IIR             0xFFC00408  /* Interrupt Identification Register */
86#define UART_LCR             0xFFC0040C  /* Line Control Register */
87#define UART_MCR                         0xFFC00410  /* Modem Control Register */
88#define UART_LSR             0xFFC00414  /* Line Status Register */
89#define UART_SCR             0xFFC0041C  /* SCR Scratch Register */
90#define UART_GCTL            0xFFC00424  /* Global Control Register */
91
92
93/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
94#define SPI_CTL                         0xFFC00500  /* SPI Control Register */
95#define SPI_FLG                         0xFFC00504  /* SPI Flag register */
96#define SPI_STAT                        0xFFC00508  /* SPI Status register */
97#define SPI_TDBR                        0xFFC0050C  /* SPI Transmit Data Buffer Register */
98#define SPI_RDBR                        0xFFC00510  /* SPI Receive Data Buffer Register */
99#define SPI_BAUD                        0xFFC00514  /* SPI Baud rate Register */
100#define SPI_SHADOW                      0xFFC00518  /* SPI_RDBR Shadow Register */
101
102
103/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
104#define TIMER0_CONFIG                   0xFFC00600     /* Timer 0 Configuration Register */
105#define TIMER0_COUNTER                          0xFFC00604     /* Timer 0 Counter Register */
106#define TIMER0_PERIOD                   0xFFC00608     /* Timer 0 Period Register */
107#define TIMER0_WIDTH                    0xFFC0060C     /* Timer 0 Width Register */
108
109#define TIMER1_CONFIG                   0xFFC00610      /*  Timer 1 Configuration Register   */
110#define TIMER1_COUNTER                  0xFFC00614      /*  Timer 1 Counter Register         */
111#define TIMER1_PERIOD                   0xFFC00618      /*  Timer 1 Period Register          */
112#define TIMER1_WIDTH                    0xFFC0061C      /*  Timer 1 Width Register           */
113
114#define TIMER2_CONFIG                   0xFFC00620      /* Timer 2 Configuration Register   */
115#define TIMER2_COUNTER                  0xFFC00624      /* Timer 2 Counter Register         */
116#define TIMER2_PERIOD                   0xFFC00628      /* Timer 2 Period Register          */
117#define TIMER2_WIDTH                    0xFFC0062C      /* Timer 2 Width Register           */
118
119#define TIMER_ENABLE                            0xFFC00640      /* Timer Enable Register */
120#define TIMER_DISABLE                           0xFFC00644      /* Timer Disable Register */
121#define TIMER_STATUS                            0xFFC00648      /* Timer Status Register */
122
123
124/*// General Purpose IO (0xFFC00700 - 0xFFC007FF) */
125#define FIO_FLAG_D                              0xFFC00700  /* Flag Mask to directly specify state of pins */
126#define FIO_FLAG_C                      0xFFC00704  /* Peripheral Interrupt Flag Register (clear) */
127#define FIO_FLAG_S                      0xFFC00708  /* Peripheral Interrupt Flag Register (set) */
128#define FIO_FLAG_T                                      0xFFC0070C  /* Flag Mask to directly toggle state of pins */
129#define FIO_MASKA_D                     0xFFC00710  /* Flag Mask Interrupt A Register (set directly) */
130#define FIO_MASKA_C                     0xFFC00714  /* Flag Mask Interrupt A Register (clear) */
131#define FIO_MASKA_S                     0xFFC00718  /* Flag Mask Interrupt A Register (set) */
132#define FIO_MASKA_T                     0xFFC0071C  /* Flag Mask Interrupt A Register (toggle) */
133#define FIO_MASKB_D                     0xFFC00720  /* Flag Mask Interrupt B Register (set directly) */
134#define FIO_MASKB_C                     0xFFC00724  /* Flag Mask Interrupt B Register (clear) */
135#define FIO_MASKB_S                     0xFFC00728  /* Flag Mask Interrupt B Register (set) */
136#define FIO_MASKB_T                     0xFFC0072C  /* Flag Mask Interrupt B Register (toggle) */
137#define FIO_DIR                         0xFFC00730  /* Peripheral Flag Direction Register */
138#define FIO_POLAR                       0xFFC00734  /* Flag Source Polarity Register */
139#define FIO_EDGE                        0xFFC00738  /* Flag Source Sensitivity Register */
140#define FIO_BOTH                        0xFFC0073C  /* Flag Set on BOTH Edges Register */
141#define FIO_INEN                                        0xFFC00740  /* Flag Input Enable Register  */
142
143
144/*// SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
145#define SPORT0_TCR1                             0xFFC00800  /* SPORT0 Transmit Configuration 1 Register */
146#define SPORT0_TCR2                             0xFFC00804  /* SPORT0 Transmit Configuration 2 Register */
147#define SPORT0_TCLKDIV                  0xFFC00808  /* SPORT0 Transmit Clock Divider */
148#define SPORT0_TFSDIV                   0xFFC0080C  /* SPORT0 Transmit Frame Sync Divider */
149#define SPORT0_TX                       0xFFC00810  /* SPORT0 TX Data Register */
150#define SPORT0_RX                       0xFFC00818  /* SPORT0 RX Data Register */
151#define SPORT0_RCR1                             0xFFC00820  /* SPORT0 Transmit Configuration 1 Register */
152#define SPORT0_RCR2                             0xFFC00824  /* SPORT0 Transmit Configuration 2 Register */
153#define SPORT0_RCLKDIV                  0xFFC00828  /* SPORT0 Receive Clock Divider */
154#define SPORT0_RFSDIV                   0xFFC0082C  /* SPORT0 Receive Frame Sync Divider */
155#define SPORT0_STAT                     0xFFC00830  /* SPORT0 Status Register */
156#define SPORT0_CHNL                     0xFFC00834  /* SPORT0 Current Channel Register */
157#define SPORT0_MCMC1                    0xFFC00838  /* SPORT0 Multi-Channel Configuration Register 1 */
158#define SPORT0_MCMC2                    0xFFC0083C  /* SPORT0 Multi-Channel Configuration Register 2 */
159#define SPORT0_MTCS0                    0xFFC00840  /* SPORT0 Multi-Channel Transmit Select Register 0 */
160#define SPORT0_MTCS1                    0xFFC00844  /* SPORT0 Multi-Channel Transmit Select Register 1 */
161#define SPORT0_MTCS2                    0xFFC00848  /* SPORT0 Multi-Channel Transmit Select Register 2 */
162#define SPORT0_MTCS3                    0xFFC0084C  /* SPORT0 Multi-Channel Transmit Select Register 3 */
163#define SPORT0_MRCS0                    0xFFC00850  /* SPORT0 Multi-Channel Receive Select Register 0 */
164#define SPORT0_MRCS1                    0xFFC00854  /* SPORT0 Multi-Channel Receive Select Register 1 */
165#define SPORT0_MRCS2                    0xFFC00858  /* SPORT0 Multi-Channel Receive Select Register 2 */
166#define SPORT0_MRCS3                    0xFFC0085C  /* SPORT0 Multi-Channel Receive Select Register 3 */
167
168
169/*// SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
170#define SPORT1_TCR1                             0xFFC00900  /* SPORT1 Transmit Configuration 1 Register */
171#define SPORT1_TCR2                             0xFFC00904  /* SPORT1 Transmit Configuration 2 Register */
172#define SPORT1_TCLKDIV                  0xFFC00908  /* SPORT1 Transmit Clock Divider */
173#define SPORT1_TFSDIV                   0xFFC0090C  /* SPORT1 Transmit Frame Sync Divider */
174#define SPORT1_TX                       0xFFC00910  /* SPORT1 TX Data Register */
175#define SPORT1_RX                       0xFFC00918  /* SPORT1 RX Data Register */
176#define SPORT1_RCR1                             0xFFC00920  /* SPORT1 Transmit Configuration 1 Register */
177#define SPORT1_RCR2                             0xFFC00924  /* SPORT1 Transmit Configuration 2 Register */
178#define SPORT1_RCLKDIV                  0xFFC00928  /* SPORT1 Receive Clock Divider */
179#define SPORT1_RFSDIV                   0xFFC0092C  /* SPORT1 Receive Frame Sync Divider */
180#define SPORT1_STAT                     0xFFC00930  /* SPORT1 Status Register */
181#define SPORT1_CHNL                     0xFFC00934  /* SPORT1 Current Channel Register */
182#define SPORT1_MCMC1                    0xFFC00938  /* SPORT1 Multi-Channel Configuration Register 1 */
183#define SPORT1_MCMC2                    0xFFC0093C  /* SPORT1 Multi-Channel Configuration Register 2 */
184#define SPORT1_MTCS0                    0xFFC00940  /* SPORT1 Multi-Channel Transmit Select Register 0 */
185#define SPORT1_MTCS1                    0xFFC00944  /* SPORT1 Multi-Channel Transmit Select Register 1 */
186#define SPORT1_MTCS2                    0xFFC00948  /* SPORT1 Multi-Channel Transmit Select Register 2 */
187#define SPORT1_MTCS3                    0xFFC0094C  /* SPORT1 Multi-Channel Transmit Select Register 3 */
188#define SPORT1_MRCS0                    0xFFC00950  /* SPORT1 Multi-Channel Receive Select Register 0 */
189#define SPORT1_MRCS1                    0xFFC00954  /* SPORT1 Multi-Channel Receive Select Register 1 */
190#define SPORT1_MRCS2                    0xFFC00958  /* SPORT1 Multi-Channel Receive Select Register 2 */
191#define SPORT1_MRCS3                    0xFFC0095C  /* SPORT1 Multi-Channel Receive Select Register 3 */
192
193
194/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
195/* Asynchronous Memory Controller  */
196#define EBIU_AMGCTL                     0xFFC00A00  /* Asynchronous Memory Global Control Register */
197#define EBIU_AMBCTL0            0xFFC00A04  /* Asynchronous Memory Bank Control Register 0 */
198#define EBIU_AMBCTL1            0xFFC00A08  /* Asynchronous Memory Bank Control Register 1 */
199
200/* SDRAM Controller */
201#define EBIU_SDGCTL                     0xFFC00A10  /* SDRAM Global Control Register */
202#define EBIU_SDBCTL                     0xFFC00A14  /* SDRAM Bank Control Register */
203#define EBIU_SDRRC                      0xFFC00A18  /* SDRAM Refresh Rate Control Register */
204#define EBIU_SDSTAT                     0xFFC00A1C  /* SDRAM Status Register */
205
206
207/* DMA Traffic controls */
208#define DMA_TC_PER                      0xFFC00B0C      /* Traffic Control Periods Register */
209#define DMA_TC_CNT                      0xFFC00B10      /* Traffic Control Current Counts Register */
210
211/* Alternate deprecated register names (below) provided for backwards code compatibility */
212#define DMA_TCPER                       0xFFC00B0C      /* Traffic Control Periods Register */
213#define DMA_TCCNT                       0xFFC00B10      /* Traffic Control Current Counts Register */
214
215
216/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
217#define DMA0_CONFIG                     0xFFC00C08      /* DMA Channel 0 Configuration Register */
218#define DMA0_NEXT_DESC_PTR      0xFFC00C00      /* DMA Channel 0 Next Descriptor Pointer Register */
219#define DMA0_START_ADDR         0xFFC00C04      /* DMA Channel 0 Start Address Register */
220#define DMA0_X_COUNT            0xFFC00C10      /* DMA Channel 0 X Count Register */
221#define DMA0_Y_COUNT            0xFFC00C18      /* DMA Channel 0 Y Count Register */
222#define DMA0_X_MODIFY           0xFFC00C14      /* DMA Channel 0 X Modify Register */
223#define DMA0_Y_MODIFY           0xFFC00C1C      /* DMA Channel 0 Y Modify Register */
224#define DMA0_CURR_DESC_PTR      0xFFC00C20      /* DMA Channel 0 Current Descriptor Pointer Register */
225#define DMA0_CURR_ADDR          0xFFC00C24      /* DMA Channel 0 Current Address Register */
226#define DMA0_CURR_X_COUNT       0xFFC00C30      /* DMA Channel 0 Current X Count Register */
227#define DMA0_CURR_Y_COUNT       0xFFC00C38      /* DMA Channel 0 Current Y Count Register */
228#define DMA0_IRQ_STATUS         0xFFC00C28      /* DMA Channel 0 Interrupt/Status Register */
229#define DMA0_PERIPHERAL_MAP     0xFFC00C2C      /* DMA Channel 0 Peripheral Map Register */
230
231#define DMA1_CONFIG                     0xFFC00C48      /* DMA Channel 1 Configuration Register */
232#define DMA1_NEXT_DESC_PTR      0xFFC00C40      /* DMA Channel 1 Next Descriptor Pointer Register */
233#define DMA1_START_ADDR         0xFFC00C44      /* DMA Channel 1 Start Address Register */
234#define DMA1_X_COUNT            0xFFC00C50      /* DMA Channel 1 X Count Register */
235#define DMA1_Y_COUNT            0xFFC00C58      /* DMA Channel 1 Y Count Register */
236#define DMA1_X_MODIFY           0xFFC00C54      /* DMA Channel 1 X Modify Register */
237#define DMA1_Y_MODIFY           0xFFC00C5C      /* DMA Channel 1 Y Modify Register */
238#define DMA1_CURR_DESC_PTR      0xFFC00C60      /* DMA Channel 1 Current Descriptor Pointer Register */
239#define DMA1_CURR_ADDR          0xFFC00C64      /* DMA Channel 1 Current Address Register */
240#define DMA1_CURR_X_COUNT       0xFFC00C70      /* DMA Channel 1 Current X Count Register */
241#define DMA1_CURR_Y_COUNT       0xFFC00C78      /* DMA Channel 1 Current Y Count Register */
242#define DMA1_IRQ_STATUS         0xFFC00C68      /* DMA Channel 1 Interrupt/Status Register */
243#define DMA1_PERIPHERAL_MAP     0xFFC00C6C      /* DMA Channel 1 Peripheral Map Register */
244
245#define DMA2_CONFIG                     0xFFC00C88      /* DMA Channel 2 Configuration Register */
246#define DMA2_NEXT_DESC_PTR      0xFFC00C80      /* DMA Channel 2 Next Descriptor Pointer Register */
247#define DMA2_START_ADDR         0xFFC00C84      /* DMA Channel 2 Start Address Register */
248#define DMA2_X_COUNT            0xFFC00C90      /* DMA Channel 2 X Count Register */
249#define DMA2_Y_COUNT            0xFFC00C98      /* DMA Channel 2 Y Count Register */
250#define DMA2_X_MODIFY           0xFFC00C94      /* DMA Channel 2 X Modify Register */
251#define DMA2_Y_MODIFY           0xFFC00C9C      /* DMA Channel 2 Y Modify Register */
252#define DMA2_CURR_DESC_PTR      0xFFC00CA0      /* DMA Channel 2 Current Descriptor Pointer Register */
253#define DMA2_CURR_ADDR          0xFFC00CA4      /* DMA Channel 2 Current Address Register */
254#define DMA2_CURR_X_COUNT       0xFFC00CB0      /* DMA Channel 2 Current X Count Register */
255#define DMA2_CURR_Y_COUNT       0xFFC00CB8      /* DMA Channel 2 Current Y Count Register */
256#define DMA2_IRQ_STATUS         0xFFC00CA8      /* DMA Channel 2 Interrupt/Status Register */
257#define DMA2_PERIPHERAL_MAP     0xFFC00CAC      /* DMA Channel 2 Peripheral Map Register */
258
259#define DMA3_CONFIG                     0xFFC00CC8      /* DMA Channel 3 Configuration Register */
260#define DMA3_NEXT_DESC_PTR      0xFFC00CC0      /* DMA Channel 3 Next Descriptor Pointer Register */
261#define DMA3_START_ADDR         0xFFC00CC4      /* DMA Channel 3 Start Address Register */
262#define DMA3_X_COUNT            0xFFC00CD0      /* DMA Channel 3 X Count Register */
263#define DMA3_Y_COUNT            0xFFC00CD8      /* DMA Channel 3 Y Count Register */
264#define DMA3_X_MODIFY           0xFFC00CD4      /* DMA Channel 3 X Modify Register */
265#define DMA3_Y_MODIFY           0xFFC00CDC      /* DMA Channel 3 Y Modify Register */
266#define DMA3_CURR_DESC_PTR      0xFFC00CE0      /* DMA Channel 3 Current Descriptor Pointer Register */
267#define DMA3_CURR_ADDR          0xFFC00CE4      /* DMA Channel 3 Current Address Register */
268#define DMA3_CURR_X_COUNT       0xFFC00CF0      /* DMA Channel 3 Current X Count Register */
269#define DMA3_CURR_Y_COUNT       0xFFC00CF8      /* DMA Channel 3 Current Y Count Register */
270#define DMA3_IRQ_STATUS         0xFFC00CE8      /* DMA Channel 3 Interrupt/Status Register */
271#define DMA3_PERIPHERAL_MAP     0xFFC00CEC      /* DMA Channel 3 Peripheral Map Register */
272
273#define DMA4_CONFIG                     0xFFC00D08      /* DMA Channel 4 Configuration Register */
274#define DMA4_NEXT_DESC_PTR      0xFFC00D00      /* DMA Channel 4 Next Descriptor Pointer Register */
275#define DMA4_START_ADDR         0xFFC00D04      /* DMA Channel 4 Start Address Register */
276#define DMA4_X_COUNT            0xFFC00D10      /* DMA Channel 4 X Count Register */
277#define DMA4_Y_COUNT            0xFFC00D18      /* DMA Channel 4 Y Count Register */
278#define DMA4_X_MODIFY           0xFFC00D14      /* DMA Channel 4 X Modify Register */
279#define DMA4_Y_MODIFY           0xFFC00D1C      /* DMA Channel 4 Y Modify Register */
280#define DMA4_CURR_DESC_PTR      0xFFC00D20      /* DMA Channel 4 Current Descriptor Pointer Register */
281#define DMA4_CURR_ADDR          0xFFC00D24      /* DMA Channel 4 Current Address Register */
282#define DMA4_CURR_X_COUNT       0xFFC00D30      /* DMA Channel 4 Current X Count Register */
283#define DMA4_CURR_Y_COUNT       0xFFC00D38      /* DMA Channel 4 Current Y Count Register */
284#define DMA4_IRQ_STATUS         0xFFC00D28      /* DMA Channel 4 Interrupt/Status Register */
285#define DMA4_PERIPHERAL_MAP     0xFFC00D2C      /* DMA Channel 4 Peripheral Map Register */
286
287#define DMA5_CONFIG                     0xFFC00D48      /* DMA Channel 5 Configuration Register */
288#define DMA5_NEXT_DESC_PTR      0xFFC00D40      /* DMA Channel 5 Next Descriptor Pointer Register */
289#define DMA5_START_ADDR         0xFFC00D44      /* DMA Channel 5 Start Address Register */
290#define DMA5_X_COUNT            0xFFC00D50      /* DMA Channel 5 X Count Register */
291#define DMA5_Y_COUNT            0xFFC00D58      /* DMA Channel 5 Y Count Register */
292#define DMA5_X_MODIFY           0xFFC00D54      /* DMA Channel 5 X Modify Register */
293#define DMA5_Y_MODIFY           0xFFC00D5C      /* DMA Channel 5 Y Modify Register */
294#define DMA5_CURR_DESC_PTR      0xFFC00D60      /* DMA Channel 5 Current Descriptor Pointer Register */
295#define DMA5_CURR_ADDR          0xFFC00D64      /* DMA Channel 5 Current Address Register */
296#define DMA5_CURR_X_COUNT       0xFFC00D70      /* DMA Channel 5 Current X Count Register */
297#define DMA5_CURR_Y_COUNT       0xFFC00D78      /* DMA Channel 5 Current Y Count Register */
298#define DMA5_IRQ_STATUS         0xFFC00D68      /* DMA Channel 5 Interrupt/Status Register */
299#define DMA5_PERIPHERAL_MAP     0xFFC00D6C      /* DMA Channel 5 Peripheral Map Register */
300
301#define DMA6_CONFIG                     0xFFC00D88      /* DMA Channel 6 Configuration Register */
302#define DMA6_NEXT_DESC_PTR      0xFFC00D80      /* DMA Channel 6 Next Descriptor Pointer Register */
303#define DMA6_START_ADDR         0xFFC00D84      /* DMA Channel 6 Start Address Register */
304#define DMA6_X_COUNT            0xFFC00D90      /* DMA Channel 6 X Count Register */
305#define DMA6_Y_COUNT            0xFFC00D98      /* DMA Channel 6 Y Count Register */
306#define DMA6_X_MODIFY           0xFFC00D94      /* DMA Channel 6 X Modify Register */
307#define DMA6_Y_MODIFY           0xFFC00D9C      /* DMA Channel 6 Y Modify Register */
308#define DMA6_CURR_DESC_PTR      0xFFC00DA0      /* DMA Channel 6 Current Descriptor Pointer Register */
309#define DMA6_CURR_ADDR          0xFFC00DA4      /* DMA Channel 6 Current Address Register */
310#define DMA6_CURR_X_COUNT       0xFFC00DB0      /* DMA Channel 6 Current X Count Register */
311#define DMA6_CURR_Y_COUNT       0xFFC00DB8      /* DMA Channel 6 Current Y Count Register */
312#define DMA6_IRQ_STATUS         0xFFC00DA8      /* DMA Channel 6 Interrupt/Status Register */
313#define DMA6_PERIPHERAL_MAP     0xFFC00DAC      /* DMA Channel 6 Peripheral Map Register */
314
315#define DMA7_CONFIG                     0xFFC00DC8      /* DMA Channel 7 Configuration Register */
316#define DMA7_NEXT_DESC_PTR      0xFFC00DC0      /* DMA Channel 7 Next Descriptor Pointer Register */
317#define DMA7_START_ADDR         0xFFC00DC4      /* DMA Channel 7 Start Address Register */
318#define DMA7_X_COUNT            0xFFC00DD0      /* DMA Channel 7 X Count Register */
319#define DMA7_Y_COUNT            0xFFC00DD8      /* DMA Channel 7 Y Count Register */
320#define DMA7_X_MODIFY           0xFFC00DD4      /* DMA Channel 7 X Modify Register */
321#define DMA7_Y_MODIFY           0xFFC00DDC      /* DMA Channel 7 Y Modify Register */
322#define DMA7_CURR_DESC_PTR      0xFFC00DE0      /* DMA Channel 7 Current Descriptor Pointer Register */
323#define DMA7_CURR_ADDR          0xFFC00DE4      /* DMA Channel 7 Current Address Register */
324#define DMA7_CURR_X_COUNT       0xFFC00DF0      /* DMA Channel 7 Current X Count Register */
325#define DMA7_CURR_Y_COUNT       0xFFC00DF8      /* DMA Channel 7 Current Y Count Register */
326#define DMA7_IRQ_STATUS         0xFFC00DE8      /* DMA Channel 7 Interrupt/Status Register */
327#define DMA7_PERIPHERAL_MAP     0xFFC00DEC      /* DMA Channel 7 Peripheral Map Register */
328
329#define MDMA_D1_CONFIG                  0xFFC00E88      /* MemDMA Stream 1 Destination Configuration Register */
330#define MDMA_D1_NEXT_DESC_PTR   0xFFC00E80      /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
331#define MDMA_D1_START_ADDR              0xFFC00E84      /* MemDMA Stream 1 Destination Start Address Register */
332#define MDMA_D1_X_COUNT                 0xFFC00E90      /* MemDMA Stream 1 Destination X Count Register */
333#define MDMA_D1_Y_COUNT                 0xFFC00E98      /* MemDMA Stream 1 Destination Y Count Register */
334#define MDMA_D1_X_MODIFY                0xFFC00E94      /* MemDMA Stream 1 Destination X Modify Register */
335#define MDMA_D1_Y_MODIFY                0xFFC00E9C      /* MemDMA Stream 1 Destination Y Modify Register */
336#define MDMA_D1_CURR_DESC_PTR   0xFFC00EA0      /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
337#define MDMA_D1_CURR_ADDR               0xFFC00EA4      /* MemDMA Stream 1 Destination Current Address Register */
338#define MDMA_D1_CURR_X_COUNT    0xFFC00EB0      /* MemDMA Stream 1 Destination Current X Count Register */
339#define MDMA_D1_CURR_Y_COUNT    0xFFC00EB8      /* MemDMA Stream 1 Destination Current Y Count Register */
340#define MDMA_D1_IRQ_STATUS              0xFFC00EA8      /* MemDMA Stream 1 Destination Interrupt/Status Register */
341#define MDMA_D1_PERIPHERAL_MAP  0xFFC00EAC      /* MemDMA Stream 1 Destination Peripheral Map Register */
342
343#define MDMA_S1_CONFIG                  0xFFC00EC8      /* MemDMA Stream 1 Source Configuration Register */
344#define MDMA_S1_NEXT_DESC_PTR   0xFFC00EC0      /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
345#define MDMA_S1_START_ADDR              0xFFC00EC4      /* MemDMA Stream 1 Source Start Address Register */
346#define MDMA_S1_X_COUNT                 0xFFC00ED0      /* MemDMA Stream 1 Source X Count Register */
347#define MDMA_S1_Y_COUNT                 0xFFC00ED8      /* MemDMA Stream 1 Source Y Count Register */
348#define MDMA_S1_X_MODIFY                0xFFC00ED4      /* MemDMA Stream 1 Source X Modify Register */
349#define MDMA_S1_Y_MODIFY                0xFFC00EDC      /* MemDMA Stream 1 Source Y Modify Register */
350#define MDMA_S1_CURR_DESC_PTR   0xFFC00EE0      /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
351#define MDMA_S1_CURR_ADDR               0xFFC00EE4      /* MemDMA Stream 1 Source Current Address Register */
352#define MDMA_S1_CURR_X_COUNT    0xFFC00EF0      /* MemDMA Stream 1 Source Current X Count Register */
353#define MDMA_S1_CURR_Y_COUNT    0xFFC00EF8      /* MemDMA Stream 1 Source Current Y Count Register */
354#define MDMA_S1_IRQ_STATUS              0xFFC00EE8      /* MemDMA Stream 1 Source Interrupt/Status Register */
355#define MDMA_S1_PERIPHERAL_MAP  0xFFC00EEC      /* MemDMA Stream 1 Source Peripheral Map Register */
356
357#define MDMA_D0_CONFIG                  0xFFC00E08      /* MemDMA Stream 0 Destination Configuration Register */
358#define MDMA_D0_NEXT_DESC_PTR   0xFFC00E00      /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
359#define MDMA_D0_START_ADDR              0xFFC00E04      /* MemDMA Stream 0 Destination Start Address Register */
360#define MDMA_D0_X_COUNT                 0xFFC00E10      /* MemDMA Stream 0 Destination X Count Register */
361#define MDMA_D0_Y_COUNT                 0xFFC00E18      /* MemDMA Stream 0 Destination Y Count Register */
362#define MDMA_D0_X_MODIFY                0xFFC00E14      /* MemDMA Stream 0 Destination X Modify Register */
363#define MDMA_D0_Y_MODIFY                0xFFC00E1C      /* MemDMA Stream 0 Destination Y Modify Register */
364#define MDMA_D0_CURR_DESC_PTR   0xFFC00E20      /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
365#define MDMA_D0_CURR_ADDR               0xFFC00E24      /* MemDMA Stream 0 Destination Current Address Register */
366#define MDMA_D0_CURR_X_COUNT    0xFFC00E30      /* MemDMA Stream 0 Destination Current X Count Register */
367#define MDMA_D0_CURR_Y_COUNT    0xFFC00E38      /* MemDMA Stream 0 Destination Current Y Count Register */
368#define MDMA_D0_IRQ_STATUS              0xFFC00E28      /* MemDMA Stream 0 Destination Interrupt/Status Register */
369#define MDMA_D0_PERIPHERAL_MAP  0xFFC00E2C      /* MemDMA Stream 0 Destination Peripheral Map Register */
370
371#define MDMA_S0_CONFIG                  0xFFC00E48      /* MemDMA Stream 0 Source Configuration Register */
372#define MDMA_S0_NEXT_DESC_PTR   0xFFC00E40      /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
373#define MDMA_S0_START_ADDR              0xFFC00E44      /* MemDMA Stream 0 Source Start Address Register */
374#define MDMA_S0_X_COUNT                 0xFFC00E50      /* MemDMA Stream 0 Source X Count Register */
375#define MDMA_S0_Y_COUNT                 0xFFC00E58      /* MemDMA Stream 0 Source Y Count Register */
376#define MDMA_S0_X_MODIFY                0xFFC00E54      /* MemDMA Stream 0 Source X Modify Register */
377#define MDMA_S0_Y_MODIFY                0xFFC00E5C      /* MemDMA Stream 0 Source Y Modify Register */
378#define MDMA_S0_CURR_DESC_PTR   0xFFC00E60      /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
379#define MDMA_S0_CURR_ADDR               0xFFC00E64      /* MemDMA Stream 0 Source Current Address Register */
380#define MDMA_S0_CURR_X_COUNT    0xFFC00E70      /* MemDMA Stream 0 Source Current X Count Register */
381#define MDMA_S0_CURR_Y_COUNT    0xFFC00E78      /* MemDMA Stream 0 Source Current Y Count Register */
382#define MDMA_S0_IRQ_STATUS              0xFFC00E68      /* MemDMA Stream 0 Source Interrupt/Status Register */
383#define MDMA_S0_PERIPHERAL_MAP  0xFFC00E6C      /* MemDMA Stream 0 Source Peripheral Map Register */
384
385
386/*// Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
387#define PPI_CONTROL                     0xFFC01000      /* PPI Control Register */
388#define PPI_STATUS                      0xFFC01004      /* PPI Status Register */
389#define PPI_COUNT                       0xFFC01008      /* PPI Transfer Count Register */
390#define PPI_DELAY                       0xFFC0100C      /* PPI Delay Count Register */
391#define PPI_FRAME                       0xFFC01010      /* PPI Frame Length Register */
392
393/*********************************************************************************** */
394/* System MMR Register Bits */
395/******************************************************************************* */
396
397/* ********************* PLL AND RESET MASKS ************************ */
398/*// PLL_CTL Masks */
399#define MSEL                    0x7E00              /* Multiplier Select For CCLK/VCO Factors */
400#define SPORT_HYS               0x8000              /* Add 250mV of Hysteresis to SPORT Inputs */
401
402/* PLL_STAT Masks */
403#define VSTAT         0x0080  /* Voltage Regulator Status: Regulator at programmed voltage */
404#define CORE_IDLE     0x0040  /* processor is in the IDLE operating mode */
405#define SLEEP         0x0010  /* processor is in the Sleep operating mode */
406#define DEEP_SLEEP    0x0008  /* processor is in the Deep Sleep operating mode */
407
408#define PLL_CLKIN                       0x0000  /* Pass CLKIN to PLL */
409#define PLL_CLKIN_DIV2          0x0001  /* Pass CLKIN/2 to PLL */
410#define DF                                      0x0001   /* 0: PLL = CLKIN, 1: PLL = CLKIN/2                                    */
411#define PLL_OFF                         0x0002  /* Shut off PLL clocks */
412#define STOPCK_OFF                      0x0008  /* Core clock off */
413#define STOPCK                          0x0008  /* Core Clock Off                                                                       */
414#define PDWN                            0x0020  /* Put the PLL in a Deep Sleep state */
415
416#if !defined(__ADSPBF538__)
417/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
418# define IN_DELAY        0x0040  /* Add 200ps Delay To EBIU Input Latches */
419# define OUT_DELAY       0x0080  /* Add 200ps Delay To EBIU Output Signals */
420#endif
421
422#define BYPASS                          0x0100  /* Bypass the PLL */
423/* PLL_CTL Macros                                                                                       */
424#ifdef _MISRA_RULES
425#define SET_MSEL(x)             (((x)&0x3Fu) << 0x9)    /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL         */
426#else
427#define SET_MSEL(x)             (((x)&0x3F) << 0x9)     /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL         */
428#endif /* _MISRA_RULES */
429
430/* PLL_DIV Masks */
431#define SSEL                            0x000F  /* System Select                                                */
432#define CSEL                            0x0030  /* Core Select                                                  */
433
434#define SCLK_DIV(x)                     (x)             /* SCLK = VCO / x */
435
436#define CCLK_DIV1                       0x0000  /* CCLK = VCO / 1 */
437#define CCLK_DIV2                       0x0010  /* CCLK = VCO / 2 */
438#define CCLK_DIV4                       0x0020  /* CCLK = VCO / 4 */
439#define CCLK_DIV8                       0x0030  /* CCLK = VCO / 8 */
440/* PLL_DIV Macros                                                                                                               */
441#ifdef _MISRA_RULES
442#define SET_SSEL(x)                     ((x)&0xFu)      /* Set SSEL = 0-15 --> SCLK = VCO/SSEL  */
443#else
444#define SET_SSEL(x)                     ((x)&0xF)       /* Set SSEL = 0-15 --> SCLK = VCO/SSEL  */
445#endif /* _MISRA_RULES */
446
447/* PLL_STAT Masks                                                                                                                                       */
448#define ACTIVE_PLLENABLED       0x0001  /* Processor In Active Mode With PLL Enabled    */
449#define FULL_ON                         0x0002  /* Processor In Full On Mode                                    */
450#define ACTIVE_PLLDISABLED      0x0004  /* Processor In Active Mode With PLL Disabled   */
451#define PLL_LOCKED                      0x0020  /* PLL_LOCKCNT Has Been Reached                                 */
452
453/* VR_CTL Masks                                                                                                                                 */
454#define FREQ                    0x0003  /* Switching Oscillator Frequency For Regulator */
455#define HIBERNATE               0x0000  /*      Powerdown/Bypass On-Board Regulation    */
456#define FREQ_333                0x0001  /*      Switching Frequency Is 333 kHz                  */
457#define FREQ_667                0x0002  /*      Switching Frequency Is 667 kHz                  */
458#define FREQ_1000               0x0003  /*      Switching Frequency Is 1 MHz                    */
459
460#define GAIN                    0x000C  /* Voltage Level Gain   */
461#define GAIN_5                  0x0000  /*      GAIN = 5                */
462#define GAIN_10                 0x0004  /*      GAIN = 10               */
463#define GAIN_20                 0x0008  /*      GAIN = 20               */
464#define GAIN_50                 0x000C  /*      GAIN = 50               */
465
466#define VLEV                    0x00F0  /* Internal Voltage Level - Only Program Values Within Specifications   */
467#define VLEV_085                0x0060  /*      VLEV = 0.85 V (See Datasheet for Regulator Tolerance)   */
468#define VLEV_090                0x0070  /*      VLEV = 0.90 V (See Datasheet for Regulator Tolerance)   */
469#define VLEV_095                0x0080  /*      VLEV = 0.95 V (See Datasheet for Regulator Tolerance)   */
470#define VLEV_100                0x0090  /*      VLEV = 1.00 V (See Datasheet for Regulator Tolerance)   */
471#define VLEV_105                0x00A0  /*      VLEV = 1.05 V (See Datasheet for Regulator Tolerance)   */
472#define VLEV_110                0x00B0  /*      VLEV = 1.10 V (See Datasheet for Regulator Tolerance)   */
473#define VLEV_115                0x00C0  /*      VLEV = 1.15 V (See Datasheet for Regulator Tolerance)   */
474#define VLEV_120                0x00D0  /*      VLEV = 1.20 V (See Datasheet for Regulator Tolerance)   */
475#define VLEV_125                0x00E0  /*      VLEV = 1.25 V (See Datasheet for Regulator Tolerance)   */
476#define VLEV_130                0x00F0  /*      VLEV = 1.30 V (See Datasheet for Regulator Tolerance)   */
477
478#define WAKE                    0x0100  /* Enable RTC/Reset Wakeup From Hibernate       */
479#define SCKELOW                 0x8000  /* Do Not Drive SCKE High During Reset After Hibernate */
480
481/* SWRST Mask */
482#define SYSTEM_RESET    0x0007  /* Initiates A System Software Reset                    */
483#define DOUBLE_FAULT    0x0008  /* Core Double Fault Causes Reset                               */
484#define RESET_DOUBLE    0x2000  /* SW Reset Generated By Core Double-Fault              */
485#define RESET_WDOG              0x4000  /* SW Reset Generated By Watchdog Timer                 */
486#define RESET_SOFTWARE  0x8000  /* SW Reset Occurred Since Last Read Of SWRST   */
487
488/* SYSCR Masks                                                                                                                                                          */
489#define BMODE_BYPASS  0x0000  /* Bypass boot ROM, execute from 16-bit external memory */
490#define BMODE_FLASH   0x0002  /* Use Boot ROM to load from 8-bit or 16-bit flash */
491#define BMODE_SPIHOST 0x0004  /* Boot from SPI0 host (slave mode) */
492#define BMODE_SPIMEM  0x0006  /* Boot from serial SPI memory */
493#define BMODE                   0x0006  /* Boot Mode - Latched During HW Reset From Mode Pins   */
494#define NOBOOT                  0x0010  /* Execute From L1 or ASYNC Bank 0 When BMODE = 0               */
495
496
497/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
498
499/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
500#define PLL_WAKEUP_IRQ  0x00000001      /* PLL Wakeup Interrupt Request */
501#define DMA_ERR_IRQ             0x00000002      /* DMA Controller Error Interrupt Request */
502#define PPI_ERR_IRQ             0x00000004      /* PPI Error Interrupt Request */
503#define SPORT0_ERR_IRQ  0x00000008      /* SPORT0 Error Interrupt Request */
504#define SPORT1_ERR_IRQ  0x00000010      /* SPORT1 Error Interrupt Request */
505#define SPI_ERR_IRQ             0x00000020      /* SPI Error Interrupt Request */
506#define UART_ERR_IRQ    0x00000040      /* UART Error Interrupt Request */
507#define RTC_IRQ                 0x00000080      /* Real-Time Clock Interrupt Request */
508#define DMA0_IRQ                0x00000100      /* DMA Channel 0 (PPI) Interrupt Request */
509#define DMA1_IRQ                0x00000200      /* DMA Channel 1 (SPORT0 RX) Interrupt Request */
510#define DMA2_IRQ                0x00000400      /* DMA Channel 2 (SPORT0 TX) Interrupt Request */
511#define DMA3_IRQ                0x00000800      /* DMA Channel 3 (SPORT1 RX) Interrupt Request */
512#define DMA4_IRQ                0x00001000      /* DMA Channel 4 (SPORT1 TX) Interrupt Request */
513#define DMA5_IRQ                0x00002000      /* DMA Channel 5 (SPI) Interrupt Request */
514#define DMA6_IRQ                0x00004000      /* DMA Channel 6 (UART RX) Interrupt Request */
515#define DMA7_IRQ                0x00008000      /* DMA Channel 7 (UART TX) Interrupt Request */
516#define TIMER0_IRQ              0x00010000      /* Timer 0 Interrupt Request */
517#define TIMER1_IRQ              0x00020000      /* Timer 1 Interrupt Request */
518#define TIMER2_IRQ              0x00040000      /* Timer 2 Interrupt Request */
519#define PFA_IRQ                 0x00080000      /* Programmable Flag Interrupt Request A */
520#define PFB_IRQ                 0x00100000      /* Programmable Flag Interrupt Request B */
521#define MDMA0_IRQ               0x00200000      /* MemDMA Stream 0 Interrupt Request */
522#define MDMA1_IRQ               0x00400000      /* MemDMA Stream 1 Interrupt Request */
523#define WDOG_IRQ                0x00800000      /* Software Watchdog Timer Interrupt Request */
524
525#ifdef _MISRA_RULES
526#define _MF15 0xFu
527#define _MF7 7u
528#else
529#define _MF15 0xF
530#define _MF7 7
531#endif /* _MISRA_RULES */
532
533/* SIC_IAR0 Macros                                                                                                                      */
534#define P0_IVG(x)               (((x)-_MF7)&_MF15)                      /* Peripheral #0 assigned IVG #x        */
535#define P1_IVG(x)               (((x)-_MF7)&_MF15) << 0x4       /* Peripheral #1 assigned IVG #x        */
536#define P2_IVG(x)               (((x)-_MF7)&_MF15) << 0x8       /* Peripheral #2 assigned IVG #x        */
537#define P3_IVG(x)               (((x)-_MF7)&_MF15) << 0xC       /* Peripheral #3 assigned IVG #x        */
538#define P4_IVG(x)               (((x)-_MF7)&_MF15) << 0x10      /* Peripheral #4 assigned IVG #x        */
539#define P5_IVG(x)               (((x)-_MF7)&_MF15) << 0x14      /* Peripheral #5 assigned IVG #x        */
540#define P6_IVG(x)               (((x)-_MF7)&_MF15) << 0x18      /* Peripheral #6 assigned IVG #x        */
541#define P7_IVG(x)               (((x)-_MF7)&_MF15) << 0x1C      /* Peripheral #7 assigned IVG #x        */
542
543/* SIC_IAR1 Macros                                                                                                                      */
544#define P8_IVG(x)               (((x)-_MF7)&_MF15)                      /* Peripheral #8 assigned IVG #x        */
545#define P9_IVG(x)               (((x)-_MF7)&_MF15) << 0x4       /* Peripheral #9 assigned IVG #x        */
546#define P10_IVG(x)              (((x)-_MF7)&_MF15) << 0x8       /* Peripheral #10 assigned IVG #x       */
547#define P11_IVG(x)              (((x)-_MF7)&_MF15) << 0xC       /* Peripheral #11 assigned IVG #x       */
548#define P12_IVG(x)              (((x)-_MF7)&_MF15) << 0x10      /* Peripheral #12 assigned IVG #x       */
549#define P13_IVG(x)              (((x)-_MF7)&_MF15) << 0x14      /* Peripheral #13 assigned IVG #x       */
550#define P14_IVG(x)              (((x)-_MF7)&_MF15) << 0x18      /* Peripheral #14 assigned IVG #x       */
551#define P15_IVG(x)              (((x)-_MF7)&_MF15) << 0x1C      /* Peripheral #15 assigned IVG #x       */
552
553/* SIC_IAR2 Macros                                                                                                                      */
554#define P16_IVG(x)              (((x)-_MF7)&_MF15)                      /* Peripheral #16 assigned IVG #x       */
555#define P17_IVG(x)              (((x)-_MF7)&_MF15) << 0x4       /* Peripheral #17 assigned IVG #x       */
556#define P18_IVG(x)              (((x)-_MF7)&_MF15) << 0x8       /* Peripheral #18 assigned IVG #x       */
557#define P19_IVG(x)              (((x)-_MF7)&_MF15) << 0xC       /* Peripheral #19 assigned IVG #x       */
558#define P20_IVG(x)              (((x)-_MF7)&_MF15) << 0x10      /* Peripheral #20 assigned IVG #x       */
559#define P21_IVG(x)              (((x)-_MF7)&_MF15) << 0x14      /* Peripheral #21 assigned IVG #x       */
560#define P22_IVG(x)              (((x)-_MF7)&_MF15) << 0x18      /* Peripheral #22 assigned IVG #x       */
561#define P23_IVG(x)              (((x)-_MF7)&_MF15) << 0x1C      /* Peripheral #23 assigned IVG #x       */
562
563/* SIC_IARx Macros */
564#ifdef _MISRA_RULES
565#define PX_IVG_CLR(x)  (0xFFFFFFFFu ^ (0xFu << (((x)%8)*4)))  /* Clear IVG Select for Peripheral #x */
566/* Usage: *pSIC_IAR1 &= PX_IVG_CLR(11); // Clears IVG Level of Peripheral #11 */
567#define PX_IVG(x,y)     ((((y)-7u)&0xFu) << (((x)%8)*4))      /* Set IVG Select to #y for Peripheral #x */
568/* Usage: *pSIC_IAR1 |= PX_IVG(11, 8);  // Sets Peripheral #11 to IVG8 */
569#else
570#define PX_IVG_CLR(x)  (0xFFFFFFFF ^ (0xF << (((x)%8)*4)))  /* Clear IVG Select for Peripheral #x */
571/* Usage: *pSIC_IAR1 &= PX_IVG_CLR(11); // Clears IVG Level of Peripheral #11 */
572#define PX_IVG(x,y)     ((((y)-7)&0xF) << (((x)%8)*4))      /* Set IVG Select to #y for Peripheral #x */
573/* Usage: *pSIC_IAR1 |= PX_IVG(11, 8);  // Sets Peripheral #11 to IVG8 */
574#endif /* _MISRA_RULES */
575
576/* SIC_IMASK Masks*/
577#define SIC_UNMASK_ALL 0x00000000         /* Unmask all peripheral interrupts */
578#define SIC_MASK_ALL   0xFFFFFFFF         /* Mask all peripheral interrupts   */
579#ifdef _MISRA_RULES
580#define SIC_MASK(x) ((int32_t)1 << ((x)&0x1Fu))  /* Mask Peripheral #x interrupt  */
581#define SIC_UNMASK(x)  (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu)))  /*Unmask Peripheral #x interrupt*/
582#else
583#define SIC_MASK(x) (1 << ((x)&0x1F))     /* Mask Peripheral #x interrupt  */
584#define SIC_UNMASK(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))  /* Unmask Peripheral #x interrupt */
585#endif /* _MISRA_RULES */
586
587/* SIC_IWR Masks*/
588#define IWR_DISABLE_ALL 0x00000000        /* Wakeup Disable all peripherals   */
589#define IWR_ENABLE_ALL  0xFFFFFFFF        /* Wakeup Enable all peripherals    */
590#ifdef _MISRA_RULES
591#define IWR_ENABLE(x)   ((int32_t)1 << ((x)&0x1Fu))  /* Wakeup Enable Peripheral #x   */
592#define IWR_DISABLE(x)  (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu)))  /*Wakeup Disable Peripheral #x */
593#else
594#define IWR_ENABLE(x)   (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x   */
595#define IWR_DISABLE(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))  /* Wakeup Disable Peripheral #x  */
596#endif /* _MISRA_RULES */
597
598
599/* ********* WATCHDOG TIMER MASKS ******************** */
600
601/* Watchdog Timer WDOG_CTL Register Masks */
602
603#ifdef _MISRA_RULES
604#define WDEV(x)                 (((x)<<1) & 0x0006u)    /* event generated on roll over */
605#else
606#define WDEV(x)                 (((x)<<1) & 0x0006)     /* event generated on roll over */
607#endif /* _MISRA_RULES */
608#define WDEV_RESET              0x0000                          /* generate reset event on roll over */
609#define WDEV_NMI                0x0002                          /* generate NMI event on roll over */
610#define WDEV_GPI                0x0004                          /* generate GP IRQ on roll over */
611#define WDEV_NONE               0x0006                          /* no event on roll over */
612#define WDEN                    0x0FF0                          /* enable watchdog */
613#define WDDIS                   0x0AD0                          /* disable watchdog */
614#define WDRO                    0x8000                          /* watchdog rolled over latch */
615
616/* depreciated WDOG_CTL Register Masks for legacy code */
617#define ICTL WDEV
618#define ENABLE_RESET    WDEV_RESET
619#define WDOG_RESET              WDEV_RESET
620#define ENABLE_NMI              WDEV_NMI
621#define WDOG_NMI                WDEV_NMI
622#define ENABLE_GPI              WDEV_GPI
623#define WDOG_GPI                WDEV_GPI
624#define DISABLE_EVT     WDEV_NONE
625#define WDOG_NONE               WDEV_NONE
626
627#define TMR_EN                  WDEN
628#define WDOG_DISABLE    WDDIS
629#define TRO                     WDRO
630
631#define ICTL_P0                 0x01
632#define ICTL_P1                 0x02
633#define TRO_P                   0x0F
634
635
636/* ***************  REAL TIME CLOCK MASKS  **************************/
637/* RTC_STAT and RTC_ALARM register */
638#define RTSEC           0x0000003F      /* Real-Time Clock Seconds */
639#define RTMIN           0x00000FC0      /* Real-Time Clock Minutes */
640#define RTHR            0x0001F000      /* Real-Time Clock Hours */
641#define RTDAY           0xFFFE0000      /* Real-Time Clock Days */
642
643/* RTC_ICTL register */
644#define SWIE            0x0001          /* Stopwatch Interrupt Enable */
645#define AIE                     0x0002          /* Alarm Interrupt Enable */
646#define SIE                     0x0004          /* Seconds (1 Hz) Interrupt Enable */
647#define MIE                     0x0008          /* Minutes Interrupt Enable */
648#define HIE                     0x0010          /* Hours Interrupt Enable */
649#define DIE                     0x0020          /* 24 Hours (Days) Interrupt Enable */
650#define DAIE            0x0040          /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
651#define WCIE            0x8000          /* Write Complete Interrupt Enable */
652
653/* RTC_ISTAT register */
654#define SWEF            0x0001          /* Stopwatch Event Flag */
655#define AEF                     0x0002          /* Alarm Event Flag */
656#define SEF                     0x0004          /* Seconds (1 Hz) Event Flag */
657#define MEF                     0x0008          /* Minutes Event Flag */
658#define HEF                     0x0010          /* Hours Event Flag */
659#define DEF                     0x0020          /* 24 Hours (Days) Event Flag */
660#define DAEF            0x0040          /* Day Alarm (Day, Hour, Minute, Second) Event Flag */
661#define WPS                     0x4000          /* Write Pending Status (RO) */
662#define WCOM            0x8000          /* Write Complete */
663
664/*// RTC_FAST Mask (RTC_PREN Mask) */
665#define ENABLE_PRESCALE      0x00000001  /* Enable prescaler so RTC runs at 1 Hz */
666#define PREN                 0x00000001
667                /* ** Must be set after power-up for proper operation of RTC */
668
669/* RTC_ALARM Macro                      z=day           y=hr    x=min   w=sec           */
670#ifdef _MISRA_RULES
671#define SET_ALARM(z,y,x,w)      ((((z)&0x7FFFu)<<0x11)|(((y)&0x1Fu)<<0xC)|(((x)&0x3Fu)<<0x6)|((w)&0x3Fu))
672#else
673#define SET_ALARM(z,y,x,w)      ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
674#endif /* _MISRA_RULES */
675
676/* Deprecated RTC_STAT and RTC_ALARM Masks                                                                              */
677#define RTC_SEC                 RTSEC   /* Real-Time Clock Seconds      */
678#define RTC_MIN                 RTMIN   /* Real-Time Clock Minutes      */
679#define RTC_HR                  RTHR    /* Real-Time Clock Hours        */
680#define RTC_DAY                 RTDAY   /* Real-Time Clock Days         */
681
682/* Deprecated RTC_ICTL/RTC_ISTAT Masks                                                                                                                                          */
683#define STOPWATCH               SWIE            /* Stopwatch Interrupt Enable                                                           */
684#define ALARM                   AIE             /* Alarm Interrupt Enable                                                                       */
685#define SECOND                  SIE             /* Seconds (1 Hz) Interrupt Enable                                                      */
686#define MINUTE                  MIE             /* Minutes Interrupt Enable                                                                     */
687#define HOUR                    HIE             /* Hours Interrupt Enable                                                                       */
688#define DAY                             DIE             /* 24 Hours (Days) Interrupt Enable                                                     */
689#define DAY_ALARM               DAIE            /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable       */
690#define WRITE_COMPLETE  WCIE            /* Write Complete Interrupt Enable                                                      */
691
692
693/* ***************************** UART CONTROLLER MASKS ********************** */
694/* UART_LCR Register */
695
696#ifdef _MISRA_RULES
697#define WLS(x)          (((x)-5u) & 0x03u)      /* Word Length Select */
698#else
699#define WLS(x)          (((x)-5) & 0x03)        /* Word Length Select */
700#endif /* _MISRA_RULES */
701#define STB                     0x04                            /* Stop Bits                    */
702#define PEN                     0x08                            /* Parity Enable                */
703#define EPS                     0x10                            /* Even Parity Select   */
704#define STP                     0x20                            /* Stick Parity                 */
705#define SB                      0x40                            /* Set Break                    */
706#define DLAB            0x80                            /* Divisor Latch Access */
707
708#define DLAB_P          0x07
709#define SB_P            0x06
710#define STP_P           0x05
711#define EPS_P           0x04
712#define PEN_P           0x03
713#define STB_P           0x02
714#define WLS_P1          0x01
715#define WLS_P0          0x00
716
717/* UART_MCR Register */
718#define LOOP_ENA        0x10            /* Loopback Mode Enable    */
719#define LOOP_ENA_P      0x04
720/* Deprecated UARTx_MCR Mask                                                                            */
721
722/* UART_LSR Register */
723#define DR                      0x01    /* Data Ready                           */
724#define OE                      0x02    /* Overrun Error                        */
725#define PE                      0x04    /* Parity Error                         */
726#define FE                      0x08    /* Framing Error                        */
727#define BI                      0x10    /* Break Interrupt                      */
728#define THRE            0x20    /* THR Empty                            */
729#define TEMT            0x40    /* TSR and UART_THR Empty       */
730
731#define TEMP_P          0x06
732#define THRE_P          0x05
733#define BI_P            0x04
734#define FE_P            0x03
735#define PE_P            0x02
736#define OE_P            0x01
737#define DR_P            0x00
738
739/* UART_IER Register */
740#define ERBFI           0x01            /* Enable Receive Buffer Full Interrupt         */
741#define ETBEI           0x02            /* Enable Transmit Buffer Empty Interrupt       */
742#define ELSI            0x04            /* Enable RX Status Interrupt                           */
743
744#define ELSI_P          0x02
745#define ETBEI_P         0x01
746#define ERBFI_P         0x00
747
748/* UART_IIR Register */
749#ifdef _MISRA_RULES
750#define STATUS(x)       (((x) << 1) & 0x06u)
751#else
752#define STATUS(x)       (((x) << 1) & 0x06)
753#endif /* _MISRA_RULES */
754#define NINT            0x01
755#define STATUS_P1       0x02
756#define STATUS_P0       0x01
757#define NINT_P          0x00
758
759/* UART_GCTL Register */
760#define UCEN            0x01            /* Enable UARTx Clocks                          */
761#define IREN            0x02            /* Enable IrDA Mode                                     */
762#define TPOLC           0x04            /* IrDA TX Polarity Change                      */
763#define RPOLC           0x08            /* IrDA RX Polarity Change                      */
764#define FPE                     0x10            /* Force Parity Error On Transmit       */
765#define FFE                     0x20            /* Force Framing Error On Transmit      */
766
767#define FFE_P           0x05
768#define FPE_P           0x04
769#define RPOLC_P         0x03
770#define TPOLC_P         0x02
771#define IREN_P          0x01
772#define UCEN_P          0x00
773
774
775/* **********  SERIAL PORT MASKS  ********************** */
776/* SPORTx_TCR1 Masks */
777#define TSPEN           0x0001  /* TX enable  */
778#define ITCLK           0x0002  /* Internal TX Clock Select  */
779#define TDTYPE          0x000C  /* TX Data Formatting Select */
780#define DTYPE_NORM      0x0000          /* Data Format Normal                                                   */
781#define DTYPE_ULAW      0x0008          /* Compand Using u-Law                                                  */
782#define DTYPE_ALAW      0x000C          /* Compand Using A-Law                                                  */
783#define TLSBIT          0x0010  /* TX Bit Order */
784#define ITFS            0x0200  /* Internal TX Frame Sync Select  */
785#define TFSR            0x0400  /* TX Frame Sync Required Select  */
786#define DITFS           0x0800  /* Data Independent TX Frame Sync Select  */
787#define LTFS            0x1000  /* Low TX Frame Sync Select  */
788#define LATFS           0x2000  /* Late TX Frame Sync Select  */
789#define TCKFE           0x4000  /* TX Clock Falling Edge Select  */
790/* SPORTx_RCR1 Deprecated Masks                                                                                                                 */
791#define TULAW           DTYPE_ULAW              /* Compand Using u-Law                                                  */
792#define TALAW           DTYPE_ALAW                      /* Compand Using A-Law                                                  */
793
794/* SPORTx_TCR2 Masks */
795#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \
796    defined(__ADSPBF533__)
797# define SLEN           0x001F
798#else
799#ifdef _MISRA_RULES
800# define SLEN(x)                ((x)&0x1Fu)     /* SPORT TX Word Length (2 - 31)                                */
801#else
802# define SLEN(x)                ((x)&0x1F)      /* SPORT TX Word Length (2 - 31)                                */
803#endif /* _MISRA_RULES */
804#endif
805#define TXSE            0x0100  /*TX Secondary Enable */
806#define TSFSE           0x0200  /*TX Stereo Frame Sync Enable */
807#define TRFST           0x0400  /*TX Right-First Data Order  */
808
809/* SPORTx_RCR1 Masks */
810#define RSPEN           0x0001  /* RX enable  */
811#define IRCLK           0x0002  /* Internal RX Clock Select  */
812#define RDTYPE          0x000C  /* RX Data Formatting Select */
813#define DTYPE_NORM      0x0000          /* no companding                                                        */
814#define DTYPE_ULAW      0x0008          /* Compand Using u-Law                                                  */
815#define DTYPE_ALAW      0x000C          /* Compand Using A-Law                                                  */
816#define RLSBIT          0x0010  /* RX Bit Order */
817#define IRFS            0x0200  /* Internal RX Frame Sync Select  */
818#define RFSR            0x0400  /* RX Frame Sync Required Select  */
819#define LRFS            0x1000  /* Low RX Frame Sync Select  */
820#define LARFS           0x2000  /* Late RX Frame Sync Select  */
821#define RCKFE           0x4000  /* RX Clock Falling Edge Select  */
822/* SPORTx_RCR1 Deprecated Masks                                                                                                                 */
823#define RULAW           DTYPE_ULAW              /* Compand Using u-Law                                                  */
824#define RALAW           DTYPE_ALAW                      /* Compand Using A-Law                                                  */
825
826/* SPORTx_RCR2 Masks */
827/* SLEN defined above */
828#define RXSE            0x0100  /*RX Secondary Enable */
829#define RSFSE           0x0200  /*RX Stereo Frame Sync Enable */
830#define RRFST           0x0400  /*Right-First Data Order  */
831
832/*SPORTx_STAT Masks */
833#define RXNE            0x0001          /*RX FIFO Not Empty Status */
834#define RUVF            0x0002          /*RX Underflow Status */
835#define ROVF            0x0004          /*RX Overflow Status */
836#define TXF                     0x0008          /*TX FIFO Full Status */
837#define TUVF            0x0010          /*TX Underflow Status */
838#define TOVF            0x0020          /*TX Overflow Status */
839#define TXHRE           0x0040          /*TX Hold Register Empty */
840
841/*SPORTx_MCMC1 Masks */
842#define WSIZE                   0x0000F000      /*Multichannel Window Size Field */
843#define WOFF                    0x000003FF      /*Multichannel Window Offset Field */
844/* SPORTx_MCMC1 Macros                                                                                                                  */
845#ifdef _MISRA_RULES
846#define SET_WOFF(x)             ((x) & 0x3FFu)  /* Multichannel Window Offset Field                     */
847/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits                                                */
848#define SET_WSIZE(x)    (((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1   */
849#else
850#define SET_WOFF(x)             ((x) & 0x3FF)   /* Multichannel Window Offset Field                     */
851/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits                                                */
852#define SET_WSIZE(x)    (((((x)>>0x3)-1)&0xF) << 0xC)   /* Multichannel Window Size = (x/8)-1   */
853#endif /* _MISRA_RULES */
854
855/*SPORTx_MCMC2 Masks */
856#define MCCRM           0x0003  /*Multichannel Clock Recovery Mode */
857#define REC_BYPASS      0x0000          /* Bypass Mode (No Clock Recovery)                              */
858#define REC_2FROM4      0x0002          /* Recover 2 MHz Clock from 4 MHz Clock                 */
859#define REC_8FROM16     0x0003          /* Recover 8 MHz Clock from 16 MHz Clock                */
860#define MCDTXPE         0x0004  /*Multichannel DMA Transmit Packing */
861#define MCDRXPE         0x0008  /*Multichannel DMA Receive Packing */
862#define MCMEN           0x0010  /*Multichannel Frame Mode Enable */
863#define FSDR            0x0080  /*Multichannel Frame Sync to Data Relationship */
864#define MFD                     0xF000  /*Multichannel Frame Delay    */
865#define MFD_0           0x0000          /* Multichannel Frame Delay = 0                                 */
866#define MFD_1           0x1000          /* Multichannel Frame Delay = 1                                 */
867#define MFD_2           0x2000          /* Multichannel Frame Delay = 2                                 */
868#define MFD_3           0x3000          /* Multichannel Frame Delay = 3                                 */
869#define MFD_4           0x4000          /* Multichannel Frame Delay = 4                                 */
870#define MFD_5           0x5000          /* Multichannel Frame Delay = 5                                 */
871#define MFD_6           0x6000          /* Multichannel Frame Delay = 6                                 */
872#define MFD_7           0x7000          /* Multichannel Frame Delay = 7                                 */
873#define MFD_8           0x8000          /* Multichannel Frame Delay = 8                                 */
874#define MFD_9           0x9000          /* Multichannel Frame Delay = 9                                 */
875#define MFD_10          0xA000          /* Multichannel Frame Delay = 10                                */
876#define MFD_11          0xB000          /* Multichannel Frame Delay = 11                                */
877#define MFD_12          0xC000          /* Multichannel Frame Delay = 12                                */
878#define MFD_13          0xD000          /* Multichannel Frame Delay = 13                                */
879#define MFD_14          0xE000          /* Multichannel Frame Delay = 14                                */
880#define MFD_15          0xF000          /* Multichannel Frame Delay = 15                                */
881
882
883/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
884/*//  PPI_CONTROL Masks         */
885#define PORT_EN         0x0001  /* PPI Port Enable  */
886#define PORT_DIR        0x0002  /* PPI Port Direction       */
887#define XFR_TYPE        0x000C  /* PPI Transfer Type  */
888#define PORT_CFG        0x0030  /* PPI Port Configuration */
889#define FLD_SEL         0x0040  /* PPI Active Field Select */
890#define PACK_EN         0x0080  /* PPI Packing Mode */
891/* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
892#define ALT_TIMING      0x0100  /* Enable Alternate PPI Timing (0.5 Silicon And Beyond) */
893#define SKIP_EN         0x0200  /* PPI Skip Element Enable */
894#define SKIP_EO         0x0400  /* PPI Skip Even/Odd Elements */
895#define DLENGTH         0x3800  /* PPI Data Length  */
896#define DLEN_8          0x0          /* PPI Data Length mask for DLEN=8 */
897#define DLEN_10         0x0800          /* Data Length = 10 Bits                        */
898#define DLEN_11         0x1000          /* Data Length = 11 Bits                        */
899#define DLEN_12         0x1800          /* Data Length = 12 Bits                        */
900#define DLEN_13         0x2000          /* Data Length = 13 Bits                        */
901#define DLEN_14         0x2800          /* Data Length = 14 Bits                        */
902#define DLEN_15         0x3000          /* Data Length = 15 Bits                        */
903#define DLEN_16         0x3800          /* Data Length = 16 Bits                        */
904#ifdef _MISRA_RULES
905#define DLEN(x)         ((((x)-9u) & 0x07u) << 11)  /* PPI Data Length (only works for x=10-->x=16) */
906#else
907#define DLEN(x)         ((((x)-9) & 0x07) << 11)  /* PPI Data Length (only works for x=10-->x=16) */
908#endif /* _MISRA_RULES */
909#define POL                     0xC000  /* PPI Signal Polarities       */
910#define POLC            0x4000          /* PPI Clock Polarity                           */
911#define POLS            0x8000          /* PPI Frame Sync Polarity                      */
912
913
914/*// PPI_STATUS Masks                                          */
915#define FLD                     0x0400  /* Field Indicator   */
916#define FT_ERR          0x0800  /* Frame Track Error */
917#define OVR                     0x1000  /* FIFO Overflow Error */
918#define UNDR            0x2000  /* FIFO Underrun Error */
919#define ERR_DET         0x4000  /* Error Detected Indicator */
920#define ERR_NCOR        0x8000  /* Error Not Corrected Indicator */
921
922
923/* **********  DMA CONTROLLER MASKS  ***********************/
924/*//DMAx_CONFIG, MDMA_yy_CONFIG Masks */
925#define DMAEN           0x0001  /* Channel Enable */
926#define WNR                     0x0002  /* Channel Direction (W/R*) */
927#define WDSIZE_8        0x0000  /* Word Size 8 bits */
928#define WDSIZE_16       0x0004  /* Word Size 16 bits */
929#define WDSIZE_32       0x0008  /* Word Size 32 bits */
930#define DMA2D           0x0010  /* 2D/1D* Mode */
931#define RESTART         0x0020  /* Restart */
932#define DI_SEL          0x0040  /* Data Interrupt Select */
933#define DI_EN           0x0080  /* Data Interrupt Enable */
934#define NDSIZE          0x0900  /* Next Descriptor Size */
935#define NDSIZE_0        0x0000  /* Next Descriptor Size = 0 (Stop/Autobuffer)   */
936#define NDSIZE_1        0x0100  /* Next Descriptor Size = 1                                             */
937#define NDSIZE_2        0x0200  /* Next Descriptor Size = 2                                             */
938#define NDSIZE_3        0x0300  /* Next Descriptor Size = 3                                             */
939#define NDSIZE_4        0x0400  /* Next Descriptor Size = 4                                             */
940#define NDSIZE_5        0x0500  /* Next Descriptor Size = 5                                             */
941#define NDSIZE_6        0x0600  /* Next Descriptor Size = 6                                             */
942#define NDSIZE_7        0x0700  /* Next Descriptor Size = 7                                             */
943#define NDSIZE_8        0x0800  /* Next Descriptor Size = 8                                             */
944#define NDSIZE_9        0x0900  /* Next Descriptor Size = 9                                             */
945#define FLOW            0x7000  /* Flow Control */
946#define FLOW_STOP       0x0000  /* Stop Mode                                                                    */
947#define FLOW_AUTO       0x1000  /* Autobuffer Mode                                                              */
948#define FLOW_ARRAY      0x4000  /* Descriptor Array Mode                                                */
949#define FLOW_SMALL      0x6000  /* Small Model Descriptor List Mode                             */
950#define FLOW_LARGE      0x7000  /* Large Model Descriptor List Mode                             */
951
952#define DMAEN_P         0x0             /* Channel Enable */
953#define WNR_P           0x1             /* Channel Direction (W/R*) */
954#define DMA2D_P         0x4             /* 2D/1D* Mode */
955#define RESTART_P       0x5             /* Restart */
956#define DI_SEL_P        0x6             /* Data Interrupt Select */
957#define DI_EN_P         0x7             /* Data Interrupt Enable */
958
959/*//DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
960#define DMA_DONE        0x0001  /* DMA Done Indicator */
961#define DMA_ERR         0x0002  /* DMA Error Indicator */
962#define DFETCH          0x0004  /* Descriptor Fetch Indicator */
963#define DMA_RUN         0x0008  /* DMA Running Indicator */
964
965#define DMA_DONE_P      0x0             /* DMA Done Indicator */
966#define DMA_ERR_P       0x1             /* DMA Error Indicator */
967#define DFETCH_P        0x2             /* Descriptor Fetch Indicator */
968#define DMA_RUN_P       0x3             /* DMA Running Indicator */
969
970/*//DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
971
972#define CTYPE                   0x0040  /* DMA Channel Type Indicator */
973#define CTYPE_P                 0x6             /* DMA Channel Type Indicator BIT POSITION */
974#define PCAP8                   0x0080  /* DMA 8-bit Operation Indicator   */
975#define PCAP16                  0x0100  /* DMA 16-bit Operation Indicator */
976#define PCAP32                  0x0200  /* DMA 32-bit Operation Indicator */
977#define PCAPWR                  0x0400  /* DMA Write Operation Indicator */
978#define PCAPRD                  0x0800  /* DMA Read Operation Indicator */
979#define PMAP                    0xF000  /* DMA Peripheral Map Field */
980
981#define PMAP_PPI                0x0000  /* PMAP PPI Port DMA */
982#define PMAP_SPORT0RX   0x1000  /* PMAP SPORT0 Receive DMA */
983#define PMAP_SPORT0TX   0x2000  /* PMAP SPORT0 Transmit DMA */
984#define PMAP_SPORT1RX   0x3000  /* PMAP SPORT1 Receive DMA */
985#define PMAP_SPORT1TX   0x4000  /* PMAP SPORT1 Transmit DMA */
986#define PMAP_SPI                0x5000  /* PMAP SPI DMA */
987#define PMAP_UARTRX             0x6000  /* PMAP UART Receive DMA */
988#define PMAP_UARTTX             0x7000  /* PMAP UART Transmit DMA */
989
990
991/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
992/* PWM Timer bit definitions */
993/* TIMER_ENABLE Register */
994#define TIMEN0                  0x0001  /* Enable Timer 0       */
995#define TIMEN1                  0x0002  /* Enable Timer 1       */
996#define TIMEN2                  0x0004  /* Enable Timer 2       */
997
998#define TIMEN0_P                0x00
999#define TIMEN1_P                0x01
1000#define TIMEN2_P                0x02
1001
1002/* TIMER_DISABLE Register */
1003#define TIMDIS0                 0x0001  /* Disable Timer 0      */
1004#define TIMDIS1                 0x0002  /* Disable Timer 1      */
1005#define TIMDIS2                 0x0004  /* Disable Timer 2      */
1006
1007#define TIMDIS0_P               0x00
1008#define TIMDIS1_P               0x01
1009#define TIMDIS2_P               0x02
1010
1011/* TIMER_STATUS Register */
1012#define TIMIL0                  0x0001  /* Timer 0 Interrupt                    */
1013#define TIMIL1                  0x0002  /* Timer 1 Interrupt                    */
1014#define TIMIL2                  0x0004  /* Timer 2 Interrupt                    */
1015#define TOVF_ERR0               0x0010  /* Timer 0 Counter Overflow             */
1016#define TOVF_ERR1               0x0020  /* Timer 1 Counter Overflow             */
1017#define TOVF_ERR2               0x0040  /* Timer 2 Counter Overflow             */
1018#define TRUN0                   0x1000  /* Timer 0 Slave Enable Status  */
1019#define TRUN1                   0x2000  /* Timer 1 Slave Enable Status  */
1020#define TRUN2                   0x4000  /* Timer 2 Slave Enable Status  */
1021
1022#define TIMIL0_P                0x00
1023#define TIMIL1_P                0x01
1024#define TIMIL2_P                0x02
1025#define TOVF_ERR0_P             0x04
1026#define TOVF_ERR1_P             0x05
1027#define TOVF_ERR2_P             0x06
1028#define TRUN0_P                 0x0C
1029#define TRUN1_P                 0x0D
1030#define TRUN2_P                 0x0E
1031
1032/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1033#define TOVL_ERR0               TOVF_ERR0
1034#define TOVL_ERR1               TOVF_ERR1
1035#define TOVL_ERR2               TOVF_ERR2
1036#define TOVL_ERR0_P             TOVF_ERR0_P
1037#define TOVL_ERR1_P     TOVF_ERR1_P
1038#define TOVL_ERR2_P     TOVF_ERR2_P
1039
1040/* TIMERx_CONFIG Registers */
1041#define PWM_OUT                 0x0001
1042#define WDTH_CAP                0x0002
1043#define EXT_CLK                 0x0003
1044#define PULSE_HI                0x0004
1045#define PERIOD_CNT              0x0008
1046#define IRQ_ENA                 0x0010
1047#define TIN_SEL                 0x0020
1048#define OUT_DIS                 0x0040
1049#define CLK_SEL                 0x0080
1050#define TOGGLE_HI               0x0100
1051#define EMU_RUN                 0x0200
1052#ifdef _MISRA_RULES
1053#define ERR_TYP(x)              (((x) & 0x03u) << 14)
1054#else
1055#define ERR_TYP(x)              (((x) & 0x03) << 14)
1056#endif /* _MISRA_RULES */
1057
1058#define TMODE_P0                0x00
1059#define TMODE_P1                0x01
1060#define PULSE_HI_P              0x02
1061#define PERIOD_CNT_P    0x03
1062#define IRQ_ENA_P               0x04
1063#define TIN_SEL_P               0x05
1064#define OUT_DIS_P               0x06
1065#define CLK_SEL_P               0x07
1066#define TOGGLE_HI_P             0x08
1067#define EMU_RUN_P               0x09
1068#define ERR_TYP_P0              0x0E
1069#define ERR_TYP_P1              0x0F
1070
1071
1072/*/ ******************   GENERAL-PURPOSE I/O  ********************* */
1073/*  Port F (Previously Flag I/O_ Masks */
1074#define PF0                     0x0001
1075#define PF1                     0x0002
1076#define PF2                     0x0004
1077#define PF3                     0x0008
1078#define PF4                     0x0010
1079#define PF5                     0x0020
1080#define PF6                     0x0040
1081#define PF7                     0x0080
1082#define PF8                     0x0100
1083#define PF9                     0x0200
1084#define PF10            0x0400
1085#define PF11            0x0800
1086#define PF12            0x1000
1087#define PF13            0x2000
1088#define PF14            0x4000
1089#define PF15            0x8000
1090
1091/*  PORT F BIT POSITIONS */
1092#define PF0_P           0x0
1093#define PF1_P           0x1
1094#define PF2_P           0x2
1095#define PF3_P           0x3
1096#define PF4_P           0x4
1097#define PF5_P           0x5
1098#define PF6_P           0x6
1099#define PF7_P           0x7
1100#define PF8_P           0x8
1101#define PF9_P           0x9
1102#define PF10_P          0xA
1103#define PF11_P          0xB
1104#define PF12_P          0xC
1105#define PF13_P          0xD
1106#define PF14_P          0xE
1107#define PF15_P          0xF
1108
1109
1110/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */
1111/* SPI_CTL Masks */
1112#define TIMOD           0x0003          /* Transfer Initiate Mode                                                       */
1113#define RDBR_CORE       0x0000          /*              RDBR Read Initiates, IRQ When RDBR Full         */
1114#define TDBR_CORE       0x0001          /*              TDBR Write Initiates, IRQ When TDBR Empty       */
1115#define RDBR_DMA        0x0002          /*              DMA Read, DMA Until FIFO Empty                          */
1116#define TDBR_DMA        0x0003          /*              DMA Write, DMA Until FIFO Full                          */
1117#define SZ                      0x0004          /* Send Zero (When TDBR Empty, Send Zero/Last*)         */
1118#define GM                      0x0008          /* Get More (When RDBR Full, Overwrite/Discard*)        */
1119#define PSSE            0x0010          /* Slave-Select Input Enable                                            */
1120#define EMISO           0x0020          /* Enable MISO As Output                                                        */
1121#define SIZE            0x0100          /* Size of Words (16/8* Bits)                                           */
1122#define LSBF            0x0200          /* LSB First                                                                            */
1123#define CPHA            0x0400          /* Clock Phase                                                                          */
1124#define CPOL            0x0800          /* Clock Polarity                                                                       */
1125#define MSTR            0x1000          /* Master/Slave*                                                                        */
1126#define WOM                     0x2000          /* Write Open Drain Master                                                      */
1127#define SPE                     0x4000          /* SPI Enable                                                                           */
1128
1129/* SPI_FLG Masks */
1130#define FLS1    0x0002  /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
1131#define FLS2    0x0004  /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
1132#define FLS3    0x0008  /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
1133#define FLS4    0x0010  /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
1134#define FLS5    0x0020  /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
1135#define FLS6    0x0040  /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
1136#define FLS7    0x0080  /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
1137
1138#define FLG1    0x0200  /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
1139#define FLG2    0x0400  /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
1140#define FLG3    0x0800  /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
1141#define FLG4    0x1000  /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
1142#define FLG5    0x2000  /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
1143#define FLG6    0x4000  /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
1144#define FLG7    0x8000  /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
1145
1146/* SPI_FLG Bit Positions */
1147#define FLS1_P  0x0001  /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
1148#define FLS2_P  0x0002  /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
1149#define FLS3_P  0x0003  /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
1150#define FLS4_P  0x0004  /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
1151#define FLS5_P  0x0005  /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
1152#define FLS6_P  0x0006  /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
1153#define FLS7_P  0x0007  /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
1154#define FLG1_P  0x0009  /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
1155#define FLG2_P  0x000A  /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
1156#define FLG3_P  0x000B  /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
1157#define FLG4_P  0x000C  /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
1158#define FLG5_P  0x000D  /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
1159#define FLG6_P  0x000E  /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
1160#define FLG7_P  0x000F  /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
1161
1162/* SPI_STAT Masks */
1163#define SPIF    0x0001  /* Set (=1) when SPI single-word transfer complete */
1164#define MODF    0x0002  /* Set (=1) in a master device when some other device tries to become master */
1165#define TXE             0x0004  /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
1166#define TXS             0x0008  /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
1167#define RBSY    0x0010  /* Set (=1) when data is received with RDBR full */
1168#define RXS             0x0020  /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
1169#define TXCOL   0x0040  /* When set (=1), corrupt data may have been transmitted  */
1170
1171/* SPIx_FLG Masks                                                                                                                                       */
1172#define FLG1E   0xFDFF          /* Activates SPI_FLOUT1                                                         */
1173#define FLG2E   0xFBFF          /* Activates SPI_FLOUT2                                                         */
1174#define FLG3E   0xF7FF          /* Activates SPI_FLOUT3                                                         */
1175#define FLG4E   0xEFFF          /* Activates SPI_FLOUT4                                                         */
1176#define FLG5E   0xDFFF          /* Activates SPI_FLOUT5                                                         */
1177#define FLG6E   0xBFFF          /* Activates SPI_FLOUT6                                                         */
1178#define FLG7E   0x7FFF          /* Activates SPI_FLOUT7                                                         */
1179
1180
1181/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
1182/* EBIU_AMGCTL Masks */
1183#define AMCKEN                  0x0001  /* Enable CLKOUT */
1184#define AMBEN_NONE              0x0000  /* All Banks Disabled                                                           */
1185#define AMBEN_B0                0x0002  /* Enable Asynchronous Memory Bank 0 only */
1186#define AMBEN_B0_B1             0x0004  /* Enable Asynchronous Memory Banks 0 & 1 only */
1187#define AMBEN_B0_B1_B2          0x0006  /* Enable Asynchronous Memory Banks 0, 1, and 2 */
1188#define AMBEN_ALL               0x0008  /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
1189#define CDPRIO                  0x0100      /* DMA has priority over core for for external accesses */
1190
1191/* EBIU_AMGCTL Bit Positions */
1192#define AMCKEN_P                0x0000  /* Enable CLKOUT */
1193#define AMBEN_P0                0x0001  /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
1194#define AMBEN_P1                0x0002  /* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
1195#define AMBEN_P2                0x0003  /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
1196
1197/* EBIU_AMBCTL0 Masks */
1198#define B0RDYEN                 0x00000001  /* Bank 0 RDY Enable, 0=disable, 1=enable */
1199#define B0RDYPOL                0x00000002  /* Bank 0 RDY Active high, 0=active low, 1=active high */
1200#define B0TT_1                  0x00000004  /* Bank 0 Transition Time from Read to Write = 1 cycle */
1201#define B0TT_2                  0x00000008  /* Bank 0 Transition Time from Read to Write = 2 cycles */
1202#define B0TT_3                  0x0000000C  /* Bank 0 Transition Time from Read to Write = 3 cycles */
1203#define B0TT_4                  0x00000000  /* Bank 0 Transition Time from Read to Write = 4 cycles */
1204#define B0ST_1                  0x00000010  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
1205#define B0ST_2                  0x00000020  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
1206#define B0ST_3                  0x00000030  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
1207#define B0ST_4                  0x00000000  /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
1208#define B0HT_1                  0x00000040  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
1209#define B0HT_2                  0x00000080  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
1210#define B0HT_3                  0x000000C0  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
1211#define B0HT_0                  0x00000000  /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
1212#define B0RAT_1                 0x00000100  /* Bank 0 Read Access Time = 1 cycle */
1213#define B0RAT_2                 0x00000200  /* Bank 0 Read Access Time = 2 cycles */
1214#define B0RAT_3                 0x00000300  /* Bank 0 Read Access Time = 3 cycles */
1215#define B0RAT_4                 0x00000400  /* Bank 0 Read Access Time = 4 cycles */
1216#define B0RAT_5                 0x00000500  /* Bank 0 Read Access Time = 5 cycles */
1217#define B0RAT_6                 0x00000600  /* Bank 0 Read Access Time = 6 cycles */
1218#define B0RAT_7                 0x00000700  /* Bank 0 Read Access Time = 7 cycles */
1219#define B0RAT_8                 0x00000800  /* Bank 0 Read Access Time = 8 cycles */
1220#define B0RAT_9                 0x00000900  /* Bank 0 Read Access Time = 9 cycles */
1221#define B0RAT_10                0x00000A00  /* Bank 0 Read Access Time = 10 cycles */
1222#define B0RAT_11                0x00000B00  /* Bank 0 Read Access Time = 11 cycles */
1223#define B0RAT_12                0x00000C00  /* Bank 0 Read Access Time = 12 cycles */
1224#define B0RAT_13                0x00000D00  /* Bank 0 Read Access Time = 13 cycles */
1225#define B0RAT_14                0x00000E00  /* Bank 0 Read Access Time = 14 cycles */
1226#define B0RAT_15                0x00000F00  /* Bank 0 Read Access Time = 15 cycles */
1227#define B0WAT_1                 0x00001000  /* Bank 0 Write Access Time = 1 cycle */
1228#define B0WAT_2                 0x00002000  /* Bank 0 Write Access Time = 2 cycles */
1229#define B0WAT_3                 0x00003000  /* Bank 0 Write Access Time = 3 cycles */
1230#define B0WAT_4                 0x00004000  /* Bank 0 Write Access Time = 4 cycles */
1231#define B0WAT_5                 0x00005000  /* Bank 0 Write Access Time = 5 cycles */
1232#define B0WAT_6                 0x00006000  /* Bank 0 Write Access Time = 6 cycles */
1233#define B0WAT_7                 0x00007000  /* Bank 0 Write Access Time = 7 cycles */
1234#define B0WAT_8                 0x00008000  /* Bank 0 Write Access Time = 8 cycles */
1235#define B0WAT_9                 0x00009000  /* Bank 0 Write Access Time = 9 cycles */
1236#define B0WAT_10                0x0000A000  /* Bank 0 Write Access Time = 10 cycles */
1237#define B0WAT_11                0x0000B000  /* Bank 0 Write Access Time = 11 cycles */
1238#define B0WAT_12                0x0000C000  /* Bank 0 Write Access Time = 12 cycles */
1239#define B0WAT_13                0x0000D000  /* Bank 0 Write Access Time = 13 cycles */
1240#define B0WAT_14                0x0000E000  /* Bank 0 Write Access Time = 14 cycles */
1241#define B0WAT_15                0x0000F000  /* Bank 0 Write Access Time = 15 cycles */
1242#define B1RDYEN                 0x00010000  /* Bank 1 RDY enable, 0=disable, 1=enable */
1243#define B1RDYPOL                0x00020000  /* Bank 1 RDY Active high, 0=active low, 1=active high */
1244#define B1TT_1                  0x00040000  /* Bank 1 Transition Time from Read to Write = 1 cycle */
1245#define B1TT_2                  0x00080000  /* Bank 1 Transition Time from Read to Write = 2 cycles */
1246#define B1TT_3                  0x000C0000  /* Bank 1 Transition Time from Read to Write = 3 cycles */
1247#define B1TT_4                  0x00000000  /* Bank 1 Transition Time from Read to Write = 4 cycles */
1248#define B1ST_1                  0x00100000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
1249#define B1ST_2                  0x00200000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
1250#define B1ST_3                  0x00300000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
1251#define B1ST_4                  0x00000000  /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
1252#define B1HT_1                  0x00400000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
1253#define B1HT_2                  0x00800000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
1254#define B1HT_3                  0x00C00000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
1255#define B1HT_0                  0x00000000  /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
1256#define B1RAT_1                 0x01000000  /* Bank 1 Read Access Time = 1 cycle */
1257#define B1RAT_2                 0x02000000  /* Bank 1 Read Access Time = 2 cycles */
1258#define B1RAT_3                 0x03000000  /* Bank 1 Read Access Time = 3 cycles */
1259#define B1RAT_4                 0x04000000  /* Bank 1 Read Access Time = 4 cycles */
1260#define B1RAT_5                 0x05000000  /* Bank 1 Read Access Time = 5 cycles */
1261#define B1RAT_6                 0x06000000  /* Bank 1 Read Access Time = 6 cycles */
1262#define B1RAT_7                 0x07000000  /* Bank 1 Read Access Time = 7 cycles */
1263#define B1RAT_8                 0x08000000  /* Bank 1 Read Access Time = 8 cycles */
1264#define B1RAT_9                 0x09000000  /* Bank 1 Read Access Time = 9 cycles */
1265#define B1RAT_10                0x0A000000  /* Bank 1 Read Access Time = 10 cycles */
1266#define B1RAT_11                0x0B000000  /* Bank 1 Read Access Time = 11 cycles */
1267#define B1RAT_12                0x0C000000  /* Bank 1 Read Access Time = 12 cycles */
1268#define B1RAT_13                0x0D000000  /* Bank 1 Read Access Time = 13 cycles */
1269#define B1RAT_14                0x0E000000  /* Bank 1 Read Access Time = 14 cycles */
1270#define B1RAT_15                0x0F000000  /* Bank 1 Read Access Time = 15 cycles */
1271#define B1WAT_1                 0x10000000 /* Bank 1 Write Access Time = 1 cycle */
1272#define B1WAT_2                 0x20000000  /* Bank 1 Write Access Time = 2 cycles */
1273#define B1WAT_3                 0x30000000  /* Bank 1 Write Access Time = 3 cycles */
1274#define B1WAT_4                 0x40000000  /* Bank 1 Write Access Time = 4 cycles */
1275#define B1WAT_5                 0x50000000  /* Bank 1 Write Access Time = 5 cycles */
1276#define B1WAT_6                 0x60000000  /* Bank 1 Write Access Time = 6 cycles */
1277#define B1WAT_7                 0x70000000  /* Bank 1 Write Access Time = 7 cycles */
1278#define B1WAT_8                 0x80000000  /* Bank 1 Write Access Time = 8 cycles */
1279#define B1WAT_9                 0x90000000  /* Bank 1 Write Access Time = 9 cycles */
1280#define B1WAT_10                0xA0000000  /* Bank 1 Write Access Time = 10 cycles */
1281#define B1WAT_11                0xB0000000  /* Bank 1 Write Access Time = 11 cycles */
1282#define B1WAT_12                0xC0000000  /* Bank 1 Write Access Time = 12 cycles */
1283#define B1WAT_13                0xD0000000  /* Bank 1 Write Access Time = 13 cycles */
1284#define B1WAT_14                0xE0000000  /* Bank 1 Write Access Time = 14 cycles */
1285#define B1WAT_15                0xF0000000  /* Bank 1 Write Access Time = 15 cycles */
1286
1287/* EBIU_AMBCTL1 Masks */
1288#define B2RDYEN                 0x00000001  /* Bank 2 RDY Enable, 0=disable, 1=enable */
1289#define B2RDYPOL                0x00000002  /* Bank 2 RDY Active high, 0=active low, 1=active high */
1290#define B2TT_1                  0x00000004  /* Bank 2 Transition Time from Read to Write = 1 cycle */
1291#define B2TT_2                  0x00000008  /* Bank 2 Transition Time from Read to Write = 2 cycles */
1292#define B2TT_3                  0x0000000C  /* Bank 2 Transition Time from Read to Write = 3 cycles */
1293#define B2TT_4                  0x00000000  /* Bank 2 Transition Time from Read to Write = 4 cycles */
1294#define B2ST_1                  0x00000010  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
1295#define B2ST_2                  0x00000020  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
1296#define B2ST_3                  0x00000030  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
1297#define B2ST_4                  0x00000000  /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
1298#define B2HT_1                  0x00000040  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
1299#define B2HT_2                  0x00000080  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
1300#define B2HT_3                  0x000000C0  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
1301#define B2HT_0                  0x00000000  /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
1302#define B2RAT_1                 0x00000100  /* Bank 2 Read Access Time = 1 cycle */
1303#define B2RAT_2                 0x00000200  /* Bank 2 Read Access Time = 2 cycles */
1304#define B2RAT_3                 0x00000300  /* Bank 2 Read Access Time = 3 cycles */
1305#define B2RAT_4                 0x00000400  /* Bank 2 Read Access Time = 4 cycles */
1306#define B2RAT_5                 0x00000500  /* Bank 2 Read Access Time = 5 cycles */
1307#define B2RAT_6                 0x00000600  /* Bank 2 Read Access Time = 6 cycles */
1308#define B2RAT_7                 0x00000700  /* Bank 2 Read Access Time = 7 cycles */
1309#define B2RAT_8                 0x00000800  /* Bank 2 Read Access Time = 8 cycles */
1310#define B2RAT_9                 0x00000900  /* Bank 2 Read Access Time = 9 cycles */
1311#define B2RAT_10                0x00000A00  /* Bank 2 Read Access Time = 10 cycles */
1312#define B2RAT_11                0x00000B00  /* Bank 2 Read Access Time = 11 cycles */
1313#define B2RAT_12                0x00000C00  /* Bank 2 Read Access Time = 12 cycles */
1314#define B2RAT_13                0x00000D00  /* Bank 2 Read Access Time = 13 cycles */
1315#define B2RAT_14                0x00000E00  /* Bank 2 Read Access Time = 14 cycles */
1316#define B2RAT_15                0x00000F00  /* Bank 2 Read Access Time = 15 cycles */
1317#define B2WAT_1                 0x00001000  /* Bank 2 Write Access Time = 1 cycle */
1318#define B2WAT_2                 0x00002000  /* Bank 2 Write Access Time = 2 cycles */
1319#define B2WAT_3                 0x00003000  /* Bank 2 Write Access Time = 3 cycles */
1320#define B2WAT_4                 0x00004000  /* Bank 2 Write Access Time = 4 cycles */
1321#define B2WAT_5                 0x00005000  /* Bank 2 Write Access Time = 5 cycles */
1322#define B2WAT_6                 0x00006000  /* Bank 2 Write Access Time = 6 cycles */
1323#define B2WAT_7                 0x00007000  /* Bank 2 Write Access Time = 7 cycles */
1324#define B2WAT_8                 0x00008000  /* Bank 2 Write Access Time = 8 cycles */
1325#define B2WAT_9                 0x00009000  /* Bank 2 Write Access Time = 9 cycles */
1326#define B2WAT_10                0x0000A000  /* Bank 2 Write Access Time = 10 cycles */
1327#define B2WAT_11                0x0000B000  /* Bank 2 Write Access Time = 11 cycles */
1328#define B2WAT_12                0x0000C000  /* Bank 2 Write Access Time = 12 cycles */
1329#define B2WAT_13                0x0000D000  /* Bank 2 Write Access Time = 13 cycles */
1330#define B2WAT_14                0x0000E000  /* Bank 2 Write Access Time = 14 cycles */
1331#define B2WAT_15                0x0000F000  /* Bank 2 Write Access Time = 15 cycles */
1332#define B3RDYEN                 0x00010000  /* Bank 3 RDY enable, 0=disable, 1=enable */
1333#define B3RDYPOL                0x00020000  /* Bank 3 RDY Active high, 0=active low, 1=active high */
1334#define B3TT_1                  0x00040000  /* Bank 3 Transition Time from Read to Write = 1 cycle */
1335#define B3TT_2                  0x00080000  /* Bank 3 Transition Time from Read to Write = 2 cycles */
1336#define B3TT_3                  0x000C0000  /* Bank 3 Transition Time from Read to Write = 3 cycles */
1337#define B3TT_4                  0x00000000  /* Bank 3 Transition Time from Read to Write = 4 cycles */
1338#define B3ST_1                  0x00100000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
1339#define B3ST_2                  0x00200000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
1340#define B3ST_3                  0x00300000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
1341#define B3ST_4                  0x00000000  /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
1342#define B3HT_1                  0x00400000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
1343#define B3HT_2                  0x00800000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
1344#define B3HT_3                  0x00C00000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
1345#define B3HT_0                  0x00000000  /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
1346#define B3RAT_1                 0x01000000 /* Bank 3 Read Access Time = 1 cycle */
1347#define B3RAT_2                 0x02000000  /* Bank 3 Read Access Time = 2 cycles */
1348#define B3RAT_3                 0x03000000  /* Bank 3 Read Access Time = 3 cycles */
1349#define B3RAT_4                 0x04000000  /* Bank 3 Read Access Time = 4 cycles */
1350#define B3RAT_5                 0x05000000  /* Bank 3 Read Access Time = 5 cycles */
1351#define B3RAT_6                 0x06000000  /* Bank 3 Read Access Time = 6 cycles */
1352#define B3RAT_7                 0x07000000  /* Bank 3 Read Access Time = 7 cycles */
1353#define B3RAT_8                 0x08000000  /* Bank 3 Read Access Time = 8 cycles */
1354#define B3RAT_9                 0x09000000  /* Bank 3 Read Access Time = 9 cycles */
1355#define B3RAT_10                0x0A000000  /* Bank 3 Read Access Time = 10 cycles */
1356#define B3RAT_11                0x0B000000  /* Bank 3 Read Access Time = 11 cycles */
1357#define B3RAT_12                0x0C000000  /* Bank 3 Read Access Time = 12 cycles */
1358#define B3RAT_13                0x0D000000  /* Bank 3 Read Access Time = 13 cycles */
1359#define B3RAT_14                0x0E000000  /* Bank 3 Read Access Time = 14 cycles */
1360#define B3RAT_15                0x0F000000  /* Bank 3 Read Access Time = 15 cycles */
1361#define B3WAT_1                 0x10000000 /* Bank 3 Write Access Time = 1 cycle */
1362#define B3WAT_2                 0x20000000  /* Bank 3 Write Access Time = 2 cycles */
1363#define B3WAT_3                 0x30000000  /* Bank 3 Write Access Time = 3 cycles */
1364#define B3WAT_4                 0x40000000  /* Bank 3 Write Access Time = 4 cycles */
1365#define B3WAT_5                 0x50000000  /* Bank 3 Write Access Time = 5 cycles */
1366#define B3WAT_6                 0x60000000  /* Bank 3 Write Access Time = 6 cycles */
1367#define B3WAT_7                 0x70000000  /* Bank 3 Write Access Time = 7 cycles */
1368#define B3WAT_8                 0x80000000  /* Bank 3 Write Access Time = 8 cycles */
1369#define B3WAT_9                 0x90000000  /* Bank 3 Write Access Time = 9 cycles */
1370#define B3WAT_10                0xA0000000  /* Bank 3 Write Access Time = 10 cycles */
1371#define B3WAT_11                0xB0000000  /* Bank 3 Write Access Time = 11 cycles */
1372#define B3WAT_12                0xC0000000  /* Bank 3 Write Access Time = 12 cycles */
1373#define B3WAT_13                0xD0000000  /* Bank 3 Write Access Time = 13 cycles */
1374#define B3WAT_14                0xE0000000  /* Bank 3 Write Access Time = 14 cycles */
1375#define B3WAT_15                0xF0000000  /* Bank 3 Write Access Time = 15 cycles */
1376
1377/* **********************  SDRAM CONTROLLER MASKS  *************************** */
1378/* EBIU_SDGCTL Masks */
1379
1380
1381#define SCTLE                   0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
1382#define CL_2                    0x00000008 /* SDRAM CAS latency = 2 cycles */
1383#define CL_3                    0x0000000C /* SDRAM CAS latency = 3 cycles */
1384#define CL           0x0000000C  /* SDRAM CAS latency */
1385#define PFE                             0x00000010 /* Enable SDRAM prefetch */
1386#define PFP                             0x00000020 /* Prefetch has priority over AMC requests */
1387#define PASR_ALL                0x00000000      /* All 4 SDRAM Banks Refreshed In Self-Refresh                          */
1388#define PASR_B0_B1              0x00000010      /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh            */
1389#define PASR_B0                 0x00000020      /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh                       */
1390#define PASR         0x00000030  /* SDRAM partial array self-refresh */
1391#define TRAS_1                  0x00000040 /* SDRAM tRAS = 1 cycle */
1392#define TRAS_2                  0x00000080 /* SDRAM tRAS = 2 cycles */
1393#define TRAS_3                  0x000000C0 /* SDRAM tRAS = 3 cycles */
1394#define TRAS_4                  0x00000100 /* SDRAM tRAS = 4 cycles */
1395#define TRAS_5                  0x00000140 /* SDRAM tRAS = 5 cycles */
1396#define TRAS_6                  0x00000180 /* SDRAM tRAS = 6 cycles */
1397#define TRAS_7                  0x000001C0 /* SDRAM tRAS = 7 cycles */
1398#define TRAS_8                  0x00000200 /* SDRAM tRAS = 8 cycles */
1399#define TRAS_9                  0x00000240 /* SDRAM tRAS = 9 cycles */
1400#define TRAS_10                 0x00000280 /* SDRAM tRAS = 10 cycles */
1401#define TRAS_11                 0x000002C0 /* SDRAM tRAS = 11 cycles */
1402#define TRAS_12                 0x00000300 /* SDRAM tRAS = 12 cycles */
1403#define TRAS_13                 0x00000340 /* SDRAM tRAS = 13 cycles */
1404#define TRAS_14                 0x00000380 /* SDRAM tRAS = 14 cycles */
1405#define TRAS_15                 0x000003C0 /* SDRAM tRAS = 15 cycles */
1406#define TRAS            0x000003C0 /* SDRAM tRAS in SCLK cycles */
1407#define TRP_1                   0x00000800 /* SDRAM tRP = 1 cycle */
1408#define TRP_2                   0x00001000 /* SDRAM tRP = 2 cycles */
1409#define TRP_3                   0x00001800 /* SDRAM tRP = 3 cycles */
1410#define TRP_4                   0x00002000 /* SDRAM tRP = 4 cycles */
1411#define TRP_5                   0x00002800 /* SDRAM tRP = 5 cycles */
1412#define TRP_6                   0x00003000 /* SDRAM tRP = 6 cycles */
1413#define TRP_7                   0x00003800 /* SDRAM tRP = 7 cycles */
1414#define TRP          0x00003800 /* SDRAM tRP in SCLK cycles */
1415#define TRCD_1                  0x00008000 /* SDRAM tRCD = 1 cycle */
1416#define TRCD_2                  0x00010000 /* SDRAM tRCD = 2 cycles */
1417#define TRCD_3                  0x00018000 /* SDRAM tRCD = 3 cycles */
1418#define TRCD_4                  0x00020000 /* SDRAM tRCD = 4 cycles */
1419#define TRCD_5                  0x00028000 /* SDRAM tRCD = 5 cycles */
1420#define TRCD_6                  0x00030000 /* SDRAM tRCD = 6 cycles */
1421#define TRCD_7                  0x00038000 /* SDRAM tRCD = 7 cycles */
1422#define TRCD         0x00030000 /* SDRAM tRCD in SCLK cycles */
1423#define TWR_1                   0x00080000 /* SDRAM tWR = 1 cycle */
1424#define TWR_2                   0x00100000 /* SDRAM tWR = 2 cycles */
1425#define TWR_3                   0x00180000 /* SDRAM tWR = 3 cycles */
1426#define TWR          0x00180000  /* SDRAM tWR in SCLK cycles */
1427#define PUPSD                   0x00200000 /*Power-up start delay */
1428#define PSM                             0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
1429#define PSS                             0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */
1430#define SRFS                    0x01000000 /* Start SDRAM self-refresh mode */
1431#define EBUFE                   0x02000000 /* Enable external buffering timing */
1432#define FBBRW                   0x04000000 /* Fast back-to-back read write enable */
1433#define EMREN                   0x10000000 /* Extended mode register enable */
1434#define TCSR                    0x20000000 /* Temp compensated self refresh value 85 deg C */
1435#define CDDBG                   0x40000000 /* Tristate SDRAM controls during bus grant */
1436
1437/* EBIU_SDBCTL Masks */
1438#define EBE                             0x00000001 /* Enable SDRAM external bank */
1439#define EBSZ_16         0x00000000 /* SDRAM external bank size = 16MB */
1440#define EBSZ_32         0x00000002 /* SDRAM external bank size = 32MB */
1441#define EBSZ_64         0x00000004 /* SDRAM external bank size = 64MB */
1442#define EBSZ_128                0x00000006 /* SDRAM external bank size = 128MB */
1443#define EBCAW_8         0x00000000 /* SDRAM external bank column address width = 8 bits */
1444#define EBSZ         0x0006 /* SDRAM external bank size */
1445#define EBCAW_9         0x00000010 /* SDRAM external bank column address width = 9 bits */
1446#define EBCAW_10                0x00000020 /* SDRAM external bank column address width = 9 bits */
1447#define EBCAW_11                0x00000030 /* SDRAM external bank column address width = 9 bits */
1448#define EBCAW        0x0030 /* SDRAM external bank column address width */
1449
1450/* EBIU_SDSTAT Masks */
1451#define SDCI                    0x00000001 /* SDRAM controller is idle  */
1452#define SDSRA                   0x00000002 /* SDRAM SDRAM self refresh is active */
1453#define SDPUA                   0x00000004 /* SDRAM power up active  */
1454#define SDRS                    0x00000008 /* SDRAM is in reset state */
1455#define SDEASE                  0x00000010 /* SDRAM EAB sticky error status - W1C */
1456#define BGSTAT                  0x00000020 /* Bus granted */
1457
1458#ifdef _MISRA_RULES
1459#pragma diag(pop)
1460#endif /* _MISRA_RULES */
1461
1462#endif /* _DEF_BF532_H */
Note: See TracBrowser for help on using the repository browser.