source: trunk/libs/newlib/src/newlib/libc/machine/hppa/memcpy.S @ 444

Last change on this file since 444 was 444, checked in by satin@…, 6 years ago

add newlib,libalmos-mkh, restructure shared_syscalls.h and mini-libc

File size: 6.4 KB
Line 
1/*
2 *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
3 *
4 *  To anyone who acknowledges that this file is provided "AS IS"
5 *  without any express or implied warranty:
6 *      permission to use, copy, modify, and distribute this file
7 *  for any purpose is hereby granted without fee, provided that
8 *  the above copyright notice and this notice appears in all
9 *  copies, and that the name of Hewlett-Packard Company not be
10 *  used in advertising or publicity pertaining to distribution
11 *  of the software without specific, written prior permission.
12 *  Hewlett-Packard Company makes no representations about the
13 *  suitability of this software for any purpose.
14 */
15
16/* HPUX_ID:     @(#) $Revision$ */
17/*
18 * memcpy(s1, s2, n)
19 *
20 * Copy n characters from s2 to s1; returns s1.
21 */
22
23#define d_addr  arg0
24#define s_addr  arg1
25#define count   arg2
26#define tmp5    arg3
27#define tmp1    r19
28#define tmp2    r20
29#define tmp3    r21
30#define tmp4    r22
31#define tmp6    r31
32
33#include "DEFS.h"
34
35ENTRY(memcpy)
36        comib,>=  5,count,byteloop     /* If count is <= 6 don't get fancy.*/
37        movb,=,n      d_addr,ret0,done    /* The return value is defined to be the value of d_addr. DELAY SLOT */
38                                        /* if d_addr is null then exit */
39        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address. */
40        extru       d_addr,31,2,tmp2   /* Extract the low two bits of the destination address. */
41        add         count,tmp2,count   /* pre increment the count to adjust for alignment of s1 */
42        comb,<>       tmp2,tmp1,not_aligned /* see if s1 is aligned w.r.t. s2. */
43        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT. */
44
45/* aligned */
46
47/* We will now begin the 16 byte at a time word move if count >= 16 ! */
48/* Else we will branch to the  4 byte-at-a time word move ! */
49
50        addibt,<,n -16,count,chekchunk  /* If count < 16 then we can't move 16 byte chunks ! */
51                                        /*   actually we can legally move 13 or more bytes on the first loop.  */
52        /* These loads and stores are done so as to prevent processor interlock. */
53chunks:
54        ldwm        16(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 16 */
55        ldw         -12(0,s_addr),tmp2  /* tmp2 = 2nd word */
56        ldw         -8(0,s_addr),tmp3   /* tmp3 = 3rd word */
57        ldw         -4(0,s_addr),tmp4   /* tmp4 = 4th word */
58        /* Now store the results !  */
59        stbys,b,m   tmp1,4(0,d_addr)   /* tmp1 = 1st word stored d_addr += 16 also take care of front porch. */
60        stwm        tmp2,4(0,d_addr)    /* tmp2 = 2nd word stored. */
61        stwm        tmp3,4(0,d_addr)   /* tmp3 = 3rd word stored. */
62        addibf,<    -16,count,chunks    /* If count is still >= 16 do another loop. */
63        stwm        tmp4,4(0,d_addr)   /* tmp4 = 4th word stored. DELAY SLOT */
64
65chekchunk:
66        addibt,<,n  12,count,back_porch /* since the count is already decremented by -16 we're testing */
67                                        /*   to see if there are at least 4 bytes left ? */
68subchunk:
69        ldws,ma      4(s_addr),tmp1     /* tmp1 = *s_addr++ */
70        addibf,<     -4,count,subchunk  /* count -= 4 */
71        stbys,b,m    tmp1,4(d_addr)     /* *d_addr++ = tmp1 */
72
73
74back_porch:
75         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done ! */
76         ldws        0(s_addr),tmp1     /* load up the back_porch */
77         add         d_addr,count,d_addr/* final store address  is +1 too high ! */
78         bv             0(r2)           /* return--were done. */
79         stbys,e     tmp1,0(d_addr)    /* kerplunk! whew !  */
80
81/* Begin non_aligned code. (no refrence to politics) */
82not_aligned:
83        sub,>=       tmp2,tmp1,tmp3     /* compute the shift quantity again and skip the load if tmp2 > tmp1. */
84        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++ */
85        zdep         tmp3,28,29,tmp4    /* compute the number of bits to shift based on the number of bytes above. */
86        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register. */
87
88        addibt,<,n   -16,count,chkchnk2 /* first step in pre adjustment of count for looping. */
89
90chunk2:   
91        ldwm            16(0,s_addr),tmp2    /* get either first or second word . tmp2 = *s_addr++ */
92        ldw             -12(s_addr),tmp3
93        ldw             -8(s_addr),tmp4
94        ldw             -4(s_addr),tmp5
95        vshd            tmp1,tmp2,tmp6      /* position data !  */
96        stbys,b,m       tmp6,4(0,d_addr)    /* store !  */
97
98        vshd            tmp2,tmp3,tmp6      /* position data !  */
99        stwm            tmp6,4(0,d_addr)    /* store ! */
100
101        vshd            tmp3,tmp4,tmp6      /* position data ! */
102        stwm            tmp6,4(0,d_addr)    /* store ! */
103
104        vshd            tmp4,tmp5,tmp6      /* position data ! */
105        stwm            tmp6,4(0,d_addr)    /* store the data ! */
106        addibf,<    -16,count,chunk2    /* If count is still >= 16 do another loop. */
107        copy            tmp5,tmp1
108       
109
110chkchnk2:
111        addibt,<,n  12,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0) */
112
113subchnk2:
114        ldwm        4(0,s_addr),tmp2    /* get next word ! */
115        vshd        tmp1,tmp2,tmp3      /* position data ! */
116        addibt,<    -4,count,bp_1       /* decrement count and when count < 4 goto back_porch (bp_1) */
117        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
118
119        ldwm        4(0,s_addr),tmp1    /* get 4th word ! */
120        vshd        tmp2,tmp1,tmp3      /* position data ! */
121        addib,>=    -4,count,subchnk2   /* decrement count and when count <= 4 go to back porch (bp_2) */
122        stbys,b,m   tmp3,4(0,d_addr)    /* store the data ! */
123
124bp_0:    copy        tmp1,tmp2           /* switch registers used in the shift process. */
125bp_1:    addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done  */
126        add         d_addr,count,d_addr /* bump destination address to be +1 too high ! */
127        mfctl           sar,tmp3        /* suppress final ldwm unless result used */
128        extru           tmp3,28,2,tmp3  /* convert bitshift to byteshift */
129        sub,<=          count,tmp3,r0   /* bytes unused if (count-byteshift <= 0*/
130
131        ldwm        4(0,s_addr),tmp1    /* get final word !         */
132        vshd        tmp2,tmp1,tmp3      /* position data ! */
133        bv              0(r2)           /* return */
134        stbys,e     tmp3,0(0,d_addr)    /* store the data ! */
135
136/* here we do ye old byte-at-a-time moves. */
137byteloop:
138        comb,>=,n    0,count,done
139
140encore:
141        ldbs,ma     1(s_addr),tmp1
142        addibf,=   -1,count,encore
143        stbs,ma     tmp1,1(d_addr)
144
145done:
146EXIT(memcpy)
Note: See TracBrowser for help on using the repository browser.