wiki:io_operations

Version 41 (modified by alain, 6 years ago) (diff)

--

Input/Output Operations

A) Peripheral identification

ALMOS-MK identifies a peripheral by a composite index (func,impl). The func index defines a functional type, the impl index defines a specific hardware implementation.

  • Each value of the functional index func defines a generic (implementation independent) device XXX, that is characterized by an API defined in the dev_xxx.h file. This generic API allows the kernel to access the peripheral without taking care on the actual hardware implementation.
  • For each generic device XXX, it can exist several hardware implementation, and each value of the implementation index impl is associated with a specific driver, that must implement the API defined for the XXX generic device.

ALMOS-MK supports two types of peripheral components:

  • External peripherals are accessed through a bridge located in one single cluster (called cluster_io, identified by the io_cxy parameter in the arch_info description). External devices are shared resources that can be used by any thread running in any cluster. Examples are the generic IOC device (Block Device Controller), the generic NIC device (Network Interface Controller), the generic TXT device (Text Terminal), the generic FBF device (Frame Buffer for Graphical Display Controller).
  • Internal peripherals are replicated in all clusters. Each internal peripheral is associated to the local kernel instance, but can be accessed by any thread running in any cluster. There are very few internal peripherals. Examples are the generic ICU device (Interrupt Controller Unit), or the generic MMC device (L2 Cache Configuration and coherence management).

ALMOS-MK supports multi-channels external peripherals, where one single peripheral controller contains N channels that can run in parallel. Each channel has a separated set of addressable registers, and each channel can be used by the OS as an independent device. Examples are the TXT peripheral (one channel per text terminal), or the NIC peripheral (one channel per MAC interface).

The set of available peripherals, and their location in a given many-core architecture must be described in the arch_info.py file. For each peripheral, the composite index is implemented as a 32 bit integer, where the 16 MSB bits define the type, and the 16 LSB bits define the subtype.

B) Generic Devices APIs

To represent the available peripherals in a given manycore architecture, ALMOS-MK uses generic device descriptors (implemented by the device_t structure). For multi-channels peripherals, ALMOS-MK defines one device descriptor per channel. This descriptor contains the functional index, the implementation index, the channel index, and the physical base address of the segment containing the addressable registers for this peripheral channel.

Each device descriptor contains a waiting queue of pending commands registered by the various client threads.

For each generic device type, the device specific API defines the list of available commands, and the specific structure defining the command descriptor (containing the command type and arguments). As an IO operation is blocking for the calling thread, a client thread can only post one command at a given time. This command is registered in the client thread descriptor, to be passed to the hardware specific driver.

The set of supported generic devices, and their associated APIs are defined below:

device type usage api definition
IOC ext block device controller ioc_api
TXT ext text terminal controller txt_api
NIC ext network interface controller nic_api
PIC ext External Interrupt controller pic_api
ICU int Internal Interrupt Controller icu_api

To signal the completion of an I/O operation, ALMOS-MK defines three types of interrupts :

  • HWI : The HardWare? Interrupt are physical signals connecting one peripheral IRQ to the distributed XCU hardware component..
  • WTI : The Write Triggered Interrupt are mailboxes implemented in the distributed ICU component to support software IPI (Inter Processor Interrupt), or to route external peripheral IRQ from the PIC component to the client core through a specific ICU.
  • PTI : The Programmable Timer Interrupt are implemented in the distributed XCU to support periodical interrupts used by the preemptive context switch mechanism.

WARNING: The two PIC (external) and ICU (internal) devices in the list defined above have a special role: they do NOT perform I/O operations, but are used as configurable interrupt routers to dynamically link a peripheral channel interrupt to a given core. Therefore, the functions defined by the ICU and PIC APIs are service functions, called by the other devices functions. These ICU and PIC functions don't use the waiting queue implemented in the generic device descriptor, but call directly the ICU or PIC drivers.

C) Devices Descriptors Placement

Internal peripherals are replicated in all clusters. In each cluster, the device descriptor is stored in the same cluster as the hardware device itself. These device descriptors are shared resources: they are mostly accessed by the local kernel instance, but can also be accessed by threads running in another cluster. This the case for both the ICU and the MMC devices.

External peripherals are shared resources, located in the I/O cluster. To minimize contention, the corresponding device descriptors are distributed on all clusters, as uniformly as possible. Therefore, an I/O operation involves generally three clusters: the client cluster, the I/O cluster containing the external peripheral, and the server cluster containing the device descriptor.

The devices_directory_t structure contains extended pointers on all generic devices descriptors defined in the manycore architecture. This structure is organized as a set of arrays:

  • There is one entry per channel for each external peripheral, and the corresponding array is indexed by the channel index.
  • There is one entry per cluster for each internal peripheral, and the corresponding array is indexed by the cluster index (it is not indexed by the cluster identifier cxy, because cxy is not a continuous index).

This device directory, implemented as a global variable, is replicated in all clusters, and is initialized in the kernel initialization phase.

D) Waiting queue Management

The commands waiting queue is implemented as a distributed XLIST, rooted in the device descriptor. To launch an I/O operation, a client thread, running in any cluster, calls a function of the device API. This function builds the command descriptor embedded in the thread descriptor, and registers the thread in the waiting queue.

For all I/O operations, ALMOS-MK implements a blocking policy: the thread calling a command function is blocked on the THREAD_BLOCKED_IO condition, and descheduled. It will be re-activated by the driver ISR (Interrupt Service Routine) signaling the completion of the I/O operation.

The waiting queue is handled as a Multi-Writers / Single-Reader FIFO, protected by a remote_lock. The N writers are the clients threads, whose number is not bounded. The single reader is a server thread associated to the device descriptor, and created at kernel initialization. This thread is in charge of consuming the pending commands from the waiting queue. When the queue is empty, the server thread blocks on the THREAD_BLOCKED_QUEUE condition, and is descheduled. It is activated by the client thread when a new command is registered in the queue.

Finally, each generic device descriptor contains a link to the specific driver associated to the available hardware implementation. This link is established in the kernel initialization phase.

E) Drivers API

To start an I/O operation, the server thread associated to the device must call the specific driver corresponding to the hardware peripheral available in the manycore architecture.

To signal the completion of a given I/O operation, the peripheral rises an IRQ to execute a specific ISR (Interrupt Service Routine) in the client cluster, on the core running the client thread. This requires to dynamically route the IRQ to this core.

Any driver must therefore implement the three following functions:

driver_init()

This function initialises both the peripheral hardware registers, and the specific global variables defined by a given hardware implementation. It is called in the kernel initialization phase.

driver_cmd( xptr_t thread , device_t * device )

This function is called by the server thread. It accesses to the peripheral hardware registers to start the I/O operation. Depending on the hardware peripheral implementation, it can be blocking or non-blocking for the server thread.

  • It is blocking on the THREAD_BLOCKED_DEV_ISR condition, if the hardware peripheral supports only one simultaneous I/O operation. Examples are a simple disk controller, or a text terminal controller. The blocked server thread must be re-activated by the ISR signaling completion of the current I/O operation.
  • It is non-blocking if the hardware peripheral supports several simultaneous I/O operations. Example is an AHCI compliant disk controller. It blocks only if the number of simultaneous I/O operations becomes larger than the max number of concurrent operations supported by the hardware.

The thread argument is the extended pointer on the client thread, containing the embedded command descriptor. The device argument is the local pointer on the device descriptor.

driver_isr( xptr_t device )

This function is executed in the client cluster, on the core running the client thread. It accesses the peripheral hardware registers to get the I/O operation error status, acknowledge the IRQ, and unblock the client thread. If the server thread has been blocked, it also unblocks the server thread. The device argument is the extended pointer on the device descriptor.

F) Global I/O operation scenario

The I/O operation mechanism involves generally three clusters : client cluster / server cluster / IO cluster. It does not use any RPC, but uses only remote accesses to to execute the three steps implied by any I/O operation:

  • To post a new command in the waiting queue of a given (remote) device descriptor, the client thread uses only few remote accesses to be registered in the distributed XLIST rooted in the server cluster.
  • To launch the I/O operation on the (remote) peripheral, the server thread uses only remote accesses to the physical registers located in the I/O cluster.
  • To complete the I/O operation, the ISR running on the client cluster accesses peripheral registers in the I/O cluster, reports the I/O operation status in the command descriptor, and unblocks the client and server threads, using only local or remote accesses.

G) Interrupts Routing

The completion of an I/O operation is signaled by the involved hardware device using an interrupt. In ALMOS-MKH, this interrupt is handled by the core running the server thread that launched the I/O operation. Therefore, the interrupt must be routed to the cluster containing the device descriptor involved in the I/O operation.

ALMOS-MKH makes the assumption that interrupt routing (from peripherals to cores) is done by a dedicated hardware device, called PIC (Programmable Interrupt Controller). This hardware device also helps the the kernel interrupt handler, running on the selected core, to select the relevant ISR (Interrupt Service Routine) to be executed.

This PIC device handles four types of interrupts detailed below :

  1. EXT_IRQ (External IRQ) generated by the external (shared) peripherals.
  2. INT_IRQ (Internal IRQ) generated by the internal (replicated) peripherals.
  3. TIM_IRQ (Timer IRQ) used for context switch by the timers (one timer per core).
  4. IPI_IRQ (Inter Processor IRQ) forced remote scheduling (one IPI per core).

This generic PIC device is supposed to be implemented as a distributed hardware infrastructure containing two types of hardware components:

  • The IOPIC component (one single component in I/O cluster) interfaces the externals IRQs (one IRQ per channel) to the PIC infrastructure.
  • The LAPIC components (one component per cluster) interfaces the PIC infrastructure to the local cores in a given cluster.

1) EXT_IRQ

Each external IRQ is identified by an irq_id index, used as an identifier by the kernel. For a given hardware architecture, this index is defined - for each external device channel - by the arch_info file describing the architecture, and is registered by the kernel in the iopic_input structure, that is a global variable replicated in all clusters, allocated in the kernel_init.c file.

The interrupt routing is statically defined during the PIC device initialization, by the architecture specific PIC driver, using the dev_pic_bind_irq() function. This function statically links the EXT_IRQ identified by its irq_id to the core running the server thread associated to the external device channel that is the source of the IRQ. As the external devices server threads are distributed on all cores in all clusters, the corresponding IRQ is routed to the relevant core.

2) INT_IRQ

Each internal IRQ is identified by an irq_id index, used as an identifier by the kernel. For a given hardware architecture, this index is defined - for each internal device channel - by the arch_info file describing the architecture, and is registered by the kernel in the local lapic_input structure, that is a global variable defined in each cluster.

The interrupt routing is local : For an internal peripheral, the server thread is always placed on a local core. The INT_IRQ, identified by its irq_id, is statically linked to the local core running the server thread by the dev_pic_bind_irq() function.

3) TIM_IRQ

The timers generating the interrupts used for context switch are supposed to be implemented in the local LAPIC component. There is one timer, and one timer IRQ per local core, identified by an irq_id index, used as an identifier by the kernel.

The TIM_IRQ identified by its irq_id is statically linked to the local core that has the same local index value.

4) IPI IRQ

To reduce various synchronisation mechanisms, ALMOS-MKH uses IPIs (Inter Processor Interrupt) : Any kernel instance, running on any corein any cluster can send an IPI to any other core in the architecture, using a remote write access to the relevant register in the PIC infrastructure. An IPI is handled as a special interrupt by the target core, and simply forces a scheduling on the target core.

H) Text terminals

The target hardware architectures generally provide a variable - but bounded - number of text terminals (called TXT channels in ALMOS-MKH). This NB_TXT_CHANNELS number is an hardware parameter defined in the arch_info.bin file. We describe here how ALMOS-MKH uses these terminals:

  1. The TXT[0] terminal is reserved for the kernel. It is normally used by the kernel to display log and/or debug messages. It can only be used by the user processes for debug, through some specific system calls such as the panic() or display_xxx() functions, that should not be used in normal exploitation.
  2. The other (NB_TXT_CHANNELS - 1) terminals TXT[i] are shared resources used by all user processes. During kernel initialization, ALMOS-MKH creates the first INIT user process, that creates itself (NB_TXT_CHANNELS -1) KSH user processes (one shell per user text terminal). All user process created by the KSH[i] process share the same TXT[i] terminal, and belong to the same group of process.
  3. In normal use, the KSH[i] processes is not supposed to be killed. If a KSH[i] process is killed, it is automatically recreated by the INIT process, to guaranty that there is always one KSH[i] for each TXT[i] terminal.
  4. Regarding the WRITE accesses, all processes attached to the same TXT_TX[i] terminal can atomically display character strings. There is no guaranty on the order, when these strings are displayed by different process., because these strings are simply sequentialized by the kernel thread associated to the shared TXT_TX[i] device.
  5. Regarding the READ accesses, only one process in the group of process attached to the TXT[i] terminal (called foreground process) is the owner of the TXT_RX[i] terminal, and can read characters. The other processes (called background processes) should not try to read characters. If a background process P try to read, it receives a SIGSTOP signal, and will keep blocked until the user uses the fg shell command to give P the ownership of the TXT_RX[i] terminal.

I) Hardware Specific

1. TSAR_MIPS32 architecture

In the TSAR_MIPS32 architecture, the IOPIC is an external hardware controller providing two services:

  1. It translate each external IRQ identified by its irq_id to a write transactions targeting a specific mailbox contained in a local LAPIC controller, for a given core in a given cluster.
  2. It allows the kernel to selectively enable/disable any external IRQ identified by its irq_id index.

In the TSAR_MIPS32 architecture, the LAPIC controller (called XCU) is replicated in all clusters containing at least one core. It handle three types of event:

  1. A HWI (Hardware Interrupt) is generated by local internal peripherals. This type implements directly the internal interrupts.
  2. A PTI (Programmable Timer Interrupt) is generated by a software programmable timer implemented in the XCU controller. This type implements directly the timer interrupts required for context switch.
  3. A WTI (Write Triggered Interrupts) is actually a mailbox implemented in the local XCU. They are used to implement both inter-processor interrupts, or to register the external interrupts generated by the IOPIC controller. The first WTI mailboxes are used for IPI (one IPI per local core). The other WTI mailboxes are used for external interrupts.IRQs.

The actual numbers of events of each type supported by a given XCU component are defined in the XCU_CONFIG register of the XCU component, and cannot be larger than the SOCLIB_MAX_HWI, SOCLIB_MAX_WTI, SOCLIB_MAX_PTI constants defined in the soclib_pic.h file.

2. X86_64 architecture