Changeset 603

Timestamp:

Jul 10, 2015, 12:34:31 PM (9 years ago)

Author:

alain

Message:

cosmetic

Location:

soft/giet_vm/giet_drivers

Files:

• hba_driver.c (modified) (7 diffs)
• sdc_driver.c (modified) (12 diffs)

soft/giet_vm/giet_drivers/hba_driver.c

@@ -162 +162 @@
     unsigned int p       = procid & ((1<<P_WIDTH)-1);
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_access() : P[%d,%d,%d] enters at cycle %d\n"
         "  use_irq = %d / to_mem = %d / lba = %x / paddr = %l / count = %d\n",
@@ -246 +246 @@
         _hba_set_register( HBA_PXCI, (1<<cmd_id) );
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_access() : P[%d,%d,%d] get slot %d in Cmd List "
         " at cycle %d / polling\n",
@@ -260 +260 @@
             pxci = _hba_get_register( HBA_PXCI );
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_access() : P[%d,%d,%d] wait on HBA_PXCI / pxci = %x\n",
         x , y , p , pxci );
@@ -285 +285 @@
     {
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_access() : P[%d,%d,%d] get slot %d in Cmd List "
         "at cycle %d / descheduling\n",
@@ -315 +315 @@
         _ctx_switch();                      
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_access() : task %d on P[%d,%d,%d] resume at cycle %d\n",
         ltid , x , y , p , _get_proctime() );
@@ -332 +332 @@
     release_success = _hba_cmd_release(cmd_id);
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_access() : P[%d,%d,%d] release slot %d in Cmd List "
         "and exit at cycle %d\n",
@@ -452 +452 @@
                            0 );          // don't force context switch
 
-#if GIET_DEBUG_IOC_DRIVER  
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC  
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG HBA] _hba_isr() : command %d completed at cycle %d\n"
         "  resume task %d running on P[%d,%d,%d]\n",

soft/giet_vm/giet_drivers/sdc_driver.c

@@ -133 +133 @@
     }
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_init() : SDC_CMD0 done at cycle %d\n", _get_proctime() );
 #endif
@@ -152 +152 @@
     }
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_init() : SDC_CMD8 done at cycle %d\n", _get_proctime() );
 #endif
@@ -165 +165 @@
     _sdc_sdhc = ( (rsp & SDC_CMD41_RSP_CCS) != 0 );
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_init() : SDC_CMD41 done at cycle %d\n", _get_proctime() );
 #endif
@@ -179 +179 @@
     _sdc_rca = rsp;
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_init() : SDC_CMD3 done at cycle %d\n", _get_proctime() );
 #endif
@@ -192 +192 @@
     }
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_init() : SDC_CMD7 done at cycle %d\n", _get_proctime() );
 #endif
@@ -241 +241 @@
     _sdc_set_register( AHCI_PXCMD  , 1 );
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_init() : AHCI init done at cycle %d\n", _get_proctime() );
 #endif
@@ -263 +263 @@
     unsigned int iter;
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_access() : P[%d,%d,%d] enters at cycle %d\n"
         "  use_irq = %d / to_mem = %d / lba = %x / paddr = %l / count = %d\n",
@@ -366 +366 @@
         _sdc_set_register( AHCI_PXCI, (1<<ptw) );
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_access() : command %d for P[%d,%d,%d]"
         " at cycle %d / polling\n",
@@ -408 +408 @@
     {
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_access() : command %d for P[%d,%d,%d] "
         "at cycle %d / descheduling\n",
@@ -435 +435 @@
         _ctx_switch();                      
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_access() : task %d on P[%d,%d,%d] resume at cycle %d\n",
         ltid , x , y , p , _get_proctime() );
@@ -448 +448 @@
     }    
 
-#if GIET_DEBUG_IOC_DRIVER
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_access() : P[%d,%d,%d] exit at cycle %d\n",
         x , y , p , _get_proctime() );
@@ -509 +509 @@
                            0 );          // don't force context switch
 
-#if GIET_DEBUG_IOC_DRIVER  
-if (_get_proctime() > GIET_DEBUG_IOC_DRIVER)
+#if GIET_DEBUG_IOC  
+if (_get_proctime() > GIET_DEBUG_IOC)
 _printf("\n[DEBUG SDC] _sdc_isr() : command %d completed at cycle %d\n"
         "  resume task %d running on P[%d,%d,%d] / status = %x\n",