source: branches/reconfiguration/modules/dspin_router/caba/source/include/dspin_router.h @ 886

Last change on this file since 886 was 886, checked in by cfuguet, 9 years ago

reconf: introduce a dspin_router_config.h interface file

  • This file contains the possible configuration values for the p_blackhole_pos port. It is meant to b used by software to configure, through the reconf:vci_xicu, the NoC routers.
File size: 5.1 KB
Line 
1/* -*- c++ -*-
2  *
3  * File : dspin_router.h
4  * Copyright (c) UPMC, Lip6
5  * Authors : Alain Greiner, Abbas Sheibanyrad, Ivan Miro, Zhen Zhang
6  *
7  * SOCLIB_LGPL_HEADER_BEGIN
8  *
9  * This file is part of SoCLib, GNU LGPLv2.1.
10  *
11  * SoCLib is free software; you can redistribute it and/or modify it
12  * under the terms of the GNU Lesser General Public License as published
13  * by the Free Software Foundation; version 2.1 of the License.
14  *
15  * SoCLib is distributed in the hope that it will be useful, but
16  * WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * Lesser General Public License for more details.
19  *
20  * You should have received a copy of the GNU Lesser General Public
21  * License along with SoCLib; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23  * 02110-1301 USA
24  *
25  * SOCLIB_LGPL_HEADER_END
26  *
27  */
28
29    ///////////////////////////////////////////////////////////////////////////
30    // Implementation Note :
31    // The xfirst_route(), broadcast_route() and is_broadcast() functions
32    // defined below are used to decode the DSPIN first flit format:
33    // - In case of a non-broadcast packet :
34    //  |   X     |   Y     |---------------------------------------|BC |
35    //  | x_width | y_width |  flit_width - (x_width + y_width + 2) | 0 |
36    //
37    //  - In case of a broacast
38    //  |  XMIN   |  XMAX   |  YMIN   |  YMAX   |-------------------|BC |
39    //  |   5     |   5     |   5     |   5     | flit_width - 22   | 1 |
40    ///////////////////////////////////////////////////////////////////////////
41
42#ifndef DSPIN_ROUTER_H_
43#define DSPIN_ROUTER_H_
44
45#include <systemc>
46#include "caba_base_module.h"
47#include "generic_fifo.h"
48#include "dspin_interface.h"
49#include "alloc_elems.h"
50
51namespace soclib { namespace caba {
52
53using namespace sc_core;
54
55template<int flit_width>
56class DspinRouter
57: public soclib::caba::BaseModule
58{
59    // Port indexing
60    enum
61    {
62        REQ_NORTH   = 0,
63        REQ_SOUTH   = 1,
64        REQ_EAST    = 2,
65        REQ_WEST    = 3,
66        REQ_LOCAL   = 4,
67        REQ_NOP     = 5,
68    };
69
70    // Input Port FSM
71    enum
72    {
73        INFSM_IDLE,
74        INFSM_REQ,
75        INFSM_ALLOC,
76        INFSM_REQ_FIRST,
77        INFSM_ALLOC_FIRST,
78        INFSM_REQ_SECOND,
79        INFSM_ALLOC_SECOND,
80        INFSM_REQ_THIRD,
81        INFSM_ALLOC_THIRD,
82        INFSM_REQ_FOURTH,
83        INFSM_ALLOC_FOURTH,
84    };
85
86    protected:
87    SC_HAS_PROCESS(DspinRouter);
88
89    public:
90
91    // ports
92    sc_in<bool>                 p_clk;
93    sc_in<bool>                 p_resetn;
94    DspinInput<flit_width>      *p_in;
95    DspinOutput<flit_width>     *p_out;
96    sc_in<uint32_t>             *p_blackhole_pos;
97
98    // constructor / destructor
99    DspinRouter( sc_module_name  name,
100                 const size_t    x,
101                 const size_t    y,
102                 const size_t    x_width,
103                 const size_t    y_width,
104                 const size_t    in_fifo_depth,
105                 const size_t    out_fifo_depth,
106                 const bool      broadcast_supported = false,
107                 const bool      reconfigurable = false );
108
109    ~DspinRouter();
110
111    private:
112
113    // define the FIFO flit
114    typedef struct internal_flit_s
115    {
116        sc_uint<flit_width>  data;
117        bool                 eop;
118    } internal_flit_t;
119
120    // registers
121    sc_signal<bool>             *r_alloc_out;   // output port is allocated
122    sc_signal<size_t>           *r_index_out;   // index of owner input port
123
124    sc_signal<int>              *r_fsm_in;      // input port state
125    sc_signal<size_t>           *r_index_in;    // index of requested output port
126    internal_flit_t             *r_buf_in;      // save first flit for a broadcast
127
128    // fifos
129    soclib::caba::GenericFifo<internal_flit_t>*  r_fifo_in;
130    soclib::caba::GenericFifo<internal_flit_t>*  r_fifo_out;
131
132    // structural parameters
133    size_t                      m_local_x;
134    size_t                      m_local_y;
135    size_t                      m_x_width;
136    size_t                      m_x_shift;
137    size_t                      m_x_mask;
138    size_t                      m_y_width;
139    size_t                      m_y_shift;
140    size_t                      m_y_mask;
141    bool                        m_broadcast_supported;
142    int                         m_disable_mask;
143
144    // methods
145    void    transition();
146    void    genMoore();
147    int     xfirst_route( size_t xdest, size_t ydest );
148    int     recovery_route( size_t xdest, size_t ydest );
149    int     route( sc_uint<flit_width> data );
150    int     broadcast_route( int iter, int source, sc_uint<flit_width> data );
151    bool    is_broadcast( sc_uint<flit_width> data );
152
153    public:
154
155    void set_disable_mask( int mask )
156    {
157        m_disable_mask = mask;
158    }
159
160    void print_trace();
161};
162
163}} // end namespace
164
165#endif // DSPIN_ROUTER_BC_H_
166
167// Local Variables:
168// tab-width: 4
169// c-basic-offset: 4
170// c-file-offsets:((innamespace . 0)(inline-open . 0))
171// indent-tabs-mode: nil
172// End:
173
174// vim: filetype=cpp:expandtab:shiftwidth=4:tabstop=4:softtabstop=4
Note: See TracBrowser for help on using the repository browser.