source: trunk/platforms/tsar_generic_leti/top.cpp @ 803

Last change on this file since 803 was 803, checked in by cfuguet, 10 years ago

tsar_generic_leti: Using the new P_WIDTH constant from hard_config.h

  • This constant is used in the clusters to compute the procesor id which now is: (((x << Y_WIDTH) + y) << P_WIDTH) + lpid
  • Introducing the p_width constant in the arch.py files
File size: 55.7 KB
Line 
1/////////////////////////////////////////////////////////////////////////
2// File: top.cpp (for tsar_generic_leti)
3// Author: Alain Greiner
4// Copyright: UPMC/LIP6
5// Date : february 2014
6// This program is released under the GNU public license
7/////////////////////////////////////////////////////////////////////////
8// This file define a generic TSAR architecture, fully compatible
9// with the VLSI Hardware prototype developped by CEA-LETI and LIP6
10// in the framework of the SHARP project.
11//
12// The processor is a MIPS32 processor wrapped in a GDB server
13// (this is defined in the tsar_xbar_cluster).
14//
15// It does not use an external ROM, as the boot code is (pre)loaded
16// in cluster (0,0) memory at address 0x0.
17//
18// The physical address space is 40 bits.
19// The 8 address MSB bits define the cluster index.
20//
21// The main hardware parameters are the mesh size (X_SIZE & Y_SIZE),
22// and the number of processors per cluster (NB_PROCS_MAX).
23// The number of clusters cannot be larger than 128.
24// The number of processors per cluster cannot be larger than 4.
25//
26// Each cluster contains:
27// - 5 dspin_local_crossbar (local interconnect)
28// - 5 dspin_router (global interconnect)
29// - up to 4 vci_cc_vcache wrapping a MIPS32 processor
30// - 1 vci_mem_cache
31// - 1 vci_xicu
32// - 1 vci_simple_ram (to model the L3 cache).
33//
34// Each processor receives 4 consecutive IRQ lines from the local XICU.
35//
36// In all clusters, the MEMC IRQ line (signaling a late write error)
37// is connected to XICU HWI[8]
38// The cluster (0,0) contains two "backup" peripherals:
39// - one block device controller, whose IRQ is connected to XICU HWI[9].
40// - one single channel TTY controller, whose IRQ is connected to XICU HWI[10].
41//
42// The cluster internal architecture is defined in file tsar_leti_cluster,
43// that must be considered as an extension of this top.cpp file.
44//
45// Besides the hardware components in clusters, "external" peripherals
46// are connected to an external IO bus (implemented as a vci_local_crossbar):
47// - one disk controller
48// - one multi-channel ethernet controller
49// - one multi-channel chained buffer dma controller
50// - one multi-channel tty controller
51// - one frame buffer controller
52// - one 32 channels iopic controller
53//
54// This IOBUS is connected to the north  port of the DIR_CMD
55// and DIR_RSP routers, in cluster(X_SIZE-1, Y_SIZE-1).
56// For all external peripherals, the hardware interrupts (HWI) are
57// translated to write interrupts (WTI) by the iopic component:
58// - IOPIC HWI[1:0]     connected to IRQ_NIC_RX[1:0]
59// - IOPIC HWI[3:2]     connected to IRQ_NIC_TX[1:0]
60// - IOPIC HWI[7:4]     connected to IRQ_CMA_TX[3:0]]
61// - IOPIC HWI[8]       connected to IRQ_BDEV
62// - IOPIC HWI[15:9]    unused       (grounded)
63// - IOPIC HWI[23:16]   connected to IRQ_TTY_RX[7:0]]
64// - IOPIC HWI[31:24]   connected to IRQ_TTY_TX[7:0]]
65////////////////////////////////////////////////////////////////////////////
66// The following parameters must be defined in the hard_config.h file :
67// - X_WIDTH          : number of bits for x coordinate (must be 4)
68// - Y_WIDTH          : number of bits for y coordinate (must be 4)
69// - X_SIZE           : number of clusters in a row (1,2,4,8,16)
70// - Y_SIZE           : number of clusters in a column (1,2,4,8)
71// - NB_PROCS_MAX     : number of processors per cluster (1, 2 or 4)
72// - NB_CMA_CHANNELS  : number of CMA channels in I/0 cluster (4 max)
73// - NB_TTY_CHANNELS  : number of TTY channels in I/O cluster (8 max)
74// - NB_NIC_CHANNELS  : number of NIC channels in I/O cluster (2 max)
75//
76// Some other hardware parameters are not used when compiling the OS,
77// and are only defined in this top.cpp file:
78// - XRAM_LATENCY     : external ram latency
79// - MEMC_WAYS        : L2 cache number of ways
80// - MEMC_SETS        : L2 cache number of sets
81// - L1_IWAYS         : L1 cache instruction number of ways
82// - L1_ISETS         : L1 cache instruction number of sets
83// - L1_DWAYS         : L1 cache data number of ways
84// - L1_DSETS         : L1 cache data number of sets
85// - FBUF_X_SIZE      : width of frame buffer (pixels)
86// - FBUF_Y_SIZE      : heigth of frame buffer (lines)
87// - BDEV_IMAGE_NAME  : file pathname for block device
88// - NIC_RX_NAME      : file pathname for NIC received packets
89// - NIC_TX_NAME      : file pathname for NIC transmited packets
90// - NIC_MAC4         : MAC address
91// - NIC_MAC2         : MAC address
92/////////////////////////////////////////////////////////////////////////
93// General policy for 40 bits physical address decoding:
94// All physical segments base addresses are multiple of 1 Mbytes
95// (=> the 24 LSB bits = 0, and the 16 MSB bits define the target)
96// The (X_WIDTH + Y_WIDTH) MSB bits (left aligned) define
97// the cluster index, and the LADR bits define the local index:
98//      |X_ID|Y_ID|  LADR |     OFFSET          |
99//      |  4 |  4 |   8   |       24            |
100/////////////////////////////////////////////////////////////////////////
101// General policy for 14 bits SRCID decoding:
102// Each component is identified by (x_id, y_id, l_id) tuple.
103//      |X_ID|Y_ID| L_ID |
104//      |  4 |  4 |  6   |
105/////////////////////////////////////////////////////////////////////////
106
107#include <systemc>
108#include <sys/time.h>
109#include <iostream>
110#include <sstream>
111#include <cstdlib>
112#include <cstdarg>
113#include <stdint.h>
114
115#include "gdbserver.h"
116#include "mapping_table.h"
117#include "tsar_leti_cluster.h"
118#include "vci_local_crossbar.h"
119#include "vci_dspin_initiator_wrapper.h"
120#include "vci_dspin_target_wrapper.h"
121#include "vci_multi_tty.h"
122#include "vci_multi_nic.h"
123#include "vci_chbuf_dma.h"
124#include "vci_block_device_tsar.h"
125#include "vci_framebuffer.h"
126#include "vci_iopic.h"
127#include "alloc_elems.h"
128
129#include "hard_config.h"
130
131///////////////////////////////////////////////////
132//               Parallelisation
133///////////////////////////////////////////////////
134#define USE_OPENMP _OPENMP
135
136#if USE_OPENMP
137#include <omp.h>
138#endif
139
140///////////////////////////////////////////////////
141//  cluster index (from x,y coordinates)
142///////////////////////////////////////////////////
143
144#define cluster(x,y)   ((y) + ((x) << Y_WIDTH))
145
146///////////////////////////////////////////////////////////
147//          DSPIN parameters
148///////////////////////////////////////////////////////////
149
150#define dspin_cmd_width      39
151#define dspin_rsp_width      32
152
153///////////////////////////////////////////////////////////
154//          VCI parameters
155///////////////////////////////////////////////////////////
156
157#define vci_cell_width_int    4
158#define vci_cell_width_ext    8
159#define vci_address_width     40
160#define vci_plen_width        8
161#define vci_rerror_width      1
162#define vci_clen_width        1
163#define vci_rflag_width       1
164#define vci_srcid_width       14
165#define vci_pktid_width       4
166#define vci_trdid_width       4
167#define vci_wrplen_width      1
168
169
170/////////////////////////////////////////////////////////////////////////////////////////
171//    Secondary Hardware Parameters
172/////////////////////////////////////////////////////////////////////////////////////////
173
174#define MAX_TTY_CHANNELS      8
175#define MAX_CMA_CHANNELS      4
176#define MAX_NIC_CHANNELS      2
177
178#define XRAM_LATENCY          0
179
180#define MEMC_WAYS             16
181#define MEMC_SETS             256
182
183#define L1_IWAYS              4
184#define L1_ISETS              64
185
186#define L1_DWAYS              4
187#define L1_DSETS              64
188
189#define NIC_MAC4              0XBABEF00D
190#define NIC_MAC2              0xBEEF
191#define NIC_RX_NAME           "/dev/null"
192#define NIC_TX_NAME           "/dev/null"
193
194#define NORTH                 0
195#define SOUTH                 1
196#define EAST                  2
197#define WEST                  3
198
199///////////////////////////////////////////////////////////////////////////////////////
200//     DEBUG Parameters default values
201///////////////////////////////////////////////////////////////////////////////////////
202
203#define MAX_FROZEN_CYCLES     500000
204
205///////////////////////////////////////////////////////////////////////////////////////
206//     LOCAL TGTID & SRCID definition
207// For all components:  global TGTID = global SRCID = cluster_index
208///////////////////////////////////////////////////////////////////////////////////////
209
210#define MEMC_TGTID            0
211#define XICU_TGTID            1
212#define MTTY_TGTID            2
213#define BDEV_TGTID            3
214#define FBUF_TGTID            4
215#define MNIC_TGTID            5
216#define CDMA_TGTID            6
217#define IOPI_TGTID            7
218
219#define BDEV_SRCID            NB_PROCS_MAX
220#define CDMA_SRCID            NB_PROCS_MAX + 1
221#define IOPI_SRCID            NB_PROCS_MAX + 2
222
223bool stop_called = false;
224
225/////////////////////////////////
226int _main(int argc, char *argv[])
227{
228   using namespace sc_core;
229   using namespace soclib::caba;
230   using namespace soclib::common;
231
232   uint32_t ncycles           = 0xFFFFFFFF; // max simulated cycles
233   size_t   threads           = 1;          // simulator's threads number
234   bool     trace_ok          = false;      // trace activated
235   uint32_t trace_from        = 0;          // trace start cycle
236   bool     trace_proc_ok     = false;      // detailed proc trace activated
237   size_t   trace_memc_ok     = false;      // detailed memc trace activated
238   size_t   trace_memc_id     = 0;          // index of memc to be traced
239   size_t   trace_proc_id     = 0;          // index of proc to be traced
240   uint32_t frozen_cycles     = MAX_FROZEN_CYCLES;
241   char     soft_name[256]    = "soft.elf";
242   char     disk_name[256]    = "disk.img";
243   struct   timeval t1,t2;
244   uint64_t ms1,ms2;
245
246   ////////////// command line arguments //////////////////////
247   if (argc > 1)
248   {
249      for (int n = 1; n < argc; n = n + 2)
250      {
251         if ((strcmp(argv[n], "-NCYCLES") == 0) && (n + 1 < argc))
252         {
253            ncycles = (uint64_t) strtol(argv[n + 1], NULL, 0);
254         }
255         else if ((strcmp(argv[n],"-DEBUG") == 0) && (n + 1 < argc))
256         {
257            trace_ok = true;
258            trace_from = (uint32_t) strtol(argv[n + 1], NULL, 0);
259         }
260         else if ((strcmp(argv[n], "-MEMCID") == 0) && (n + 1 < argc))
261         {
262            trace_memc_ok = true;
263            trace_memc_id = (size_t) strtol(argv[n + 1], NULL, 0);
264            size_t x = trace_memc_id >> Y_WIDTH;
265            size_t y = trace_memc_id & ((1<<Y_WIDTH)-1);
266
267            assert( (x < X_SIZE) and (y < (Y_SIZE)) and
268                  "MEMCID parameter refers a not valid memory cache");
269         }
270         else if ((strcmp(argv[n], "-PROCID") == 0) && (n + 1 < argc))
271         {
272            trace_proc_ok = true;
273            trace_proc_id = (size_t) strtol(argv[n + 1], NULL, 0);
274            size_t cluster_xy = trace_proc_id >> P_WIDTH ;
275            size_t x          = cluster_xy >> Y_WIDTH;
276            size_t y          = cluster_xy & ((1<<Y_WIDTH)-1);
277            size_t l          = trace_proc_id & ((1<<P_WIDTH)-1) ;
278
279            assert( (x < X_SIZE) and (y < Y_SIZE) and (l < NB_PROCS_MAX) and
280                  "PROCID parameter refers a not valid processor");
281         }
282         else if ((strcmp(argv[n], "-SOFT") == 0) && ((n + 1) < argc))
283         {
284            strcpy(soft_name, argv[n + 1]);
285         }
286         else if ((strcmp(argv[n], "-DISK") == 0) && ((n + 1) < argc))
287         {
288            strcpy(disk_name, argv[n + 1]);
289         }
290         else if ((strcmp(argv[n], "-THREADS") == 0) && ((n + 1) < argc))
291         {
292            threads = (size_t) strtol(argv[n + 1], NULL, 0);
293            threads = (threads < 1) ? 1 : threads;
294         }
295         else if ((strcmp(argv[n], "-FROZEN") == 0) && (n + 1 < argc))
296         {
297            frozen_cycles = (uint32_t) strtol(argv[n + 1], NULL, 0);
298         }
299         else
300         {
301            std::cout << "   Arguments are (key,value) couples." << std::endl;
302            std::cout << "   The order is not important." << std::endl;
303            std::cout << "   Accepted arguments are :" << std::endl << std::endl;
304            std::cout << "     -NCYCLES number_of_simulated_cycles" << std::endl;
305            std::cout << "     -DEBUG debug_start_cycle" << std::endl;
306            std::cout << "     -SOFT path to soft" << std::endl;
307            std::cout << "     -DISK path to disk image" << std::endl;
308            std::cout << "     -THREADS simulator's threads number" << std::endl;
309            std::cout << "     -FROZEN max_number_of_lines" << std::endl;
310            std::cout << "     -PERIOD number_of_cycles between trace" << std::endl;
311            std::cout << "     -MEMCID index_memc_to_be_traced" << std::endl;
312            std::cout << "     -PROCID index_proc_to_be_traced" << std::endl;
313            exit(0);
314         }
315      }
316   }
317
318    // checking hardware parameters
319    assert( ((X_SIZE==1) or (X_SIZE==2) or (X_SIZE==4) or (X_SIZE==8) or
320             (X_SIZE==16)) and
321            "Illegal X_SIZE parameter" );
322
323    assert( ((Y_SIZE==1) or (Y_SIZE==2) or (Y_SIZE==4) or (Y_SIZE==8)) and
324            "Illegal Y_SIZE parameter" );
325
326    assert( (P_WIDTH <= 2) and
327            "P_WIDTH parameter cannot be larger than 2" );
328
329    assert( (NB_PROCS_MAX <= 4) and
330            "Illegal NB_PROCS_MAX parameter" );
331
332    assert( (NB_CMA_CHANNELS <= MAX_CMA_CHANNELS) and
333            "The NB_CMA_CHANNELS parameter cannot be larger than 4" );
334
335    assert( (NB_TTY_CHANNELS <= MAX_TTY_CHANNELS) and
336            "The NB_TTY_CHANNELS parameter cannot be larger than 8" );
337
338    assert( (NB_NIC_CHANNELS <= MAX_NIC_CHANNELS) and
339            "The NB_NIC_CHANNELS parameter cannot be larger than 2" );
340
341    assert( (vci_address_width == 40) and
342            "VCI address width with the GIET must be 40 bits" );
343
344    assert( (X_WIDTH == 4) and (Y_WIDTH == 4) and
345            "ERROR: you must have X_WIDTH == Y_WIDTH == 4");
346
347    std::cout << std::endl;
348
349    std::cout << " - X_SIZE           = " << X_SIZE << std::endl;
350    std::cout << " - Y_SIZE           = " << Y_SIZE << std::endl;
351    std::cout << " - NB_PROCS_MAX     = " << NB_PROCS_MAX <<  std::endl;
352    std::cout << " - NB_DMA_CHANNELS  = " << NB_DMA_CHANNELS <<  std::endl;
353    std::cout << " - NB_TTY_CHANNELS  = " << NB_TTY_CHANNELS <<  std::endl;
354    std::cout << " - NB_NIC_CHANNELS  = " << NB_NIC_CHANNELS <<  std::endl;
355    std::cout << " - MEMC_WAYS        = " << MEMC_WAYS << std::endl;
356    std::cout << " - MEMC_SETS        = " << MEMC_SETS << std::endl;
357    std::cout << " - RAM_LATENCY      = " << XRAM_LATENCY << std::endl;
358    std::cout << " - MAX_FROZEN       = " << frozen_cycles << std::endl;
359    std::cout << " - MAX_CYCLES       = " << ncycles << std::endl;
360    std::cout << " - RESET_ADDRESS    = " << RESET_ADDRESS << std::endl;
361    std::cout << " - SOFT_FILENAME    = " << soft_name << std::endl;
362    std::cout << " - DISK_IMAGENAME   = " << disk_name << std::endl;
363    std::cout << " - OPENMP THREADS   = " << threads << std::endl;
364
365    std::cout << std::endl;
366
367    // Internal and External VCI parameters definition
368    typedef soclib::caba::VciParams<vci_cell_width_int,
369                                    vci_plen_width,
370                                    vci_address_width,
371                                    vci_rerror_width,
372                                    vci_clen_width,
373                                    vci_rflag_width,
374                                    vci_srcid_width,
375                                    vci_pktid_width,
376                                    vci_trdid_width,
377                                    vci_wrplen_width> vci_param_int;
378
379    typedef soclib::caba::VciParams<vci_cell_width_ext,
380                                    vci_plen_width,
381                                    vci_address_width,
382                                    vci_rerror_width,
383                                    vci_clen_width,
384                                    vci_rflag_width,
385                                    vci_srcid_width,
386                                    vci_pktid_width,
387                                    vci_trdid_width,
388                                    vci_wrplen_width> vci_param_ext;
389
390#if USE_OPENMP
391   omp_set_dynamic(false);
392   omp_set_num_threads(threads);
393   std::cerr << "Built with openmp version " << _OPENMP << std::endl;
394#endif
395
396
397   ///////////////////////////////////////
398   //  Direct Network Mapping Table
399   ///////////////////////////////////////
400
401   MappingTable maptabd(vci_address_width,
402                        IntTab(X_WIDTH + Y_WIDTH, 16 - X_WIDTH - Y_WIDTH),
403                        IntTab(X_WIDTH + Y_WIDTH, vci_srcid_width - X_WIDTH - Y_WIDTH),
404                        0x00FF000000ULL);
405
406   // replicated segments
407   for (size_t x = 0; x < X_SIZE; x++)
408   {
409      for (size_t y = 0; y < (Y_SIZE) ; y++)
410      {
411         sc_uint<vci_address_width> offset;
412         offset = ((sc_uint<vci_address_width>)cluster(x,y)) << 32;
413
414         std::ostringstream    si;
415         si << "seg_xicu_" << x << "_" << y;
416         maptabd.add(Segment(si.str(), SEG_XCU_BASE + offset, SEG_XCU_SIZE,
417                  IntTab(cluster(x,y),XICU_TGTID), false));
418
419         std::ostringstream    sd;
420         sd << "seg_mcfg_" << x << "_" << y;
421         maptabd.add(Segment(sd.str(), SEG_MMC_BASE + offset, SEG_MMC_SIZE,
422                  IntTab(cluster(x,y),MEMC_TGTID), false));
423
424         std::ostringstream    sh;
425         sh << "seg_memc_" << x << "_" << y;
426         maptabd.add(Segment(sh.str(), SEG_RAM_BASE + offset, SEG_RAM_SIZE,
427                  IntTab(cluster(x,y),MEMC_TGTID), true));
428      }
429   }
430
431   // segments for peripherals in cluster(0,0)
432   maptabd.add(Segment("seg_tty0", SEG_TTY_BASE, SEG_TTY_SIZE,
433               IntTab(cluster(0,0),MTTY_TGTID), false));
434
435   maptabd.add(Segment("seg_ioc0", SEG_IOC_BASE, SEG_IOC_SIZE,
436               IntTab(cluster(0,0),BDEV_TGTID), false));
437
438   // segments for peripherals in cluster_io (X_SIZE-1,Y_SIZE)
439   sc_uint<vci_address_width> offset;
440   offset = ((sc_uint<vci_address_width>)cluster(X_SIZE-1,Y_SIZE)) << 32;
441
442   maptabd.add(Segment("seg_mtty", SEG_TTY_BASE + offset, SEG_TTY_SIZE,
443               IntTab(cluster(X_SIZE-1, Y_SIZE),MTTY_TGTID), false));
444
445   maptabd.add(Segment("seg_fbuf", SEG_FBF_BASE + offset, SEG_FBF_SIZE,
446               IntTab(cluster(X_SIZE-1, Y_SIZE),FBUF_TGTID), false));
447
448   maptabd.add(Segment("seg_bdev", SEG_IOC_BASE + offset, SEG_IOC_SIZE,
449               IntTab(cluster(X_SIZE-1, Y_SIZE),BDEV_TGTID), false));
450
451   maptabd.add(Segment("seg_mnic", SEG_NIC_BASE + offset, SEG_NIC_SIZE,
452               IntTab(cluster(X_SIZE-1, Y_SIZE),MNIC_TGTID), false));
453
454   maptabd.add(Segment("seg_cdma", SEG_CMA_BASE + offset, SEG_CMA_SIZE,
455               IntTab(cluster(X_SIZE-1, Y_SIZE),CDMA_TGTID), false));
456
457   maptabd.add(Segment("seg_iopi", SEG_PIC_BASE + offset, SEG_PIC_SIZE,
458               IntTab(cluster(X_SIZE-1, Y_SIZE),IOPI_TGTID), false));
459
460   std::cout << maptabd << std::endl;
461
462    /////////////////////////////////////////////////
463    // Ram network mapping table
464    /////////////////////////////////////////////////
465
466    MappingTable maptabx(vci_address_width,
467                         IntTab(X_WIDTH+Y_WIDTH),
468                         IntTab(X_WIDTH+Y_WIDTH),
469                         0x00FF000000ULL);
470
471    for (size_t x = 0; x < X_SIZE; x++)
472    {
473        for (size_t y = 0; y < (Y_SIZE) ; y++)
474        {
475            sc_uint<vci_address_width> offset;
476            offset = (sc_uint<vci_address_width>)cluster(x,y)
477                      << (vci_address_width-X_WIDTH-Y_WIDTH);
478
479            std::ostringstream sh;
480            sh << "x_seg_memc_" << x << "_" << y;
481
482            maptabx.add(Segment(sh.str(), SEG_RAM_BASE + offset,
483                     SEG_RAM_SIZE, IntTab(cluster(x,y)), false));
484        }
485    }
486    std::cout << maptabx << std::endl;
487
488    ////////////////////
489    // Signals
490    ///////////////////
491
492    sc_clock                          signal_clk("clk");
493    sc_signal<bool>                   signal_resetn("resetn");
494
495    // IRQs from external peripherals
496    sc_signal<bool>                   signal_irq_bdev;
497    sc_signal<bool>                   signal_irq_mnic_rx[NB_NIC_CHANNELS];
498    sc_signal<bool>                   signal_irq_mnic_tx[NB_NIC_CHANNELS];
499    sc_signal<bool>                   signal_irq_mtty_rx[NB_TTY_CHANNELS];
500//  sc_signal<bool>                   signal_irq_mtty_tx[NB_TTY_CHANNELS];
501    sc_signal<bool>                   signal_irq_cdma[NB_CMA_CHANNELS];
502    sc_signal<bool>                   signal_irq_false;
503
504   // Horizontal inter-clusters DSPIN signals
505   DspinSignals<dspin_cmd_width>** signal_dspin_h_cmd_inc =
506      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_h_cmd_inc", X_SIZE-1, Y_SIZE);
507   DspinSignals<dspin_cmd_width>** signal_dspin_h_cmd_dec =
508      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_h_cmd_dec", X_SIZE-1, Y_SIZE);
509
510   DspinSignals<dspin_rsp_width>** signal_dspin_h_rsp_inc =
511      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_h_rsp_inc", X_SIZE-1, Y_SIZE);
512   DspinSignals<dspin_rsp_width>** signal_dspin_h_rsp_dec =
513      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_h_rsp_dec", X_SIZE-1, Y_SIZE);
514
515   DspinSignals<dspin_cmd_width>** signal_dspin_h_m2p_inc =
516      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_h_m2p_inc", X_SIZE-1, Y_SIZE);
517   DspinSignals<dspin_cmd_width>** signal_dspin_h_m2p_dec =
518      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_h_m2p_dec", X_SIZE-1, Y_SIZE);
519
520   DspinSignals<dspin_rsp_width>** signal_dspin_h_p2m_inc =
521      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_h_p2m_inc", X_SIZE-1, Y_SIZE);
522   DspinSignals<dspin_rsp_width>** signal_dspin_h_p2m_dec =
523      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_h_p2m_dec", X_SIZE-1, Y_SIZE);
524
525   DspinSignals<dspin_cmd_width>** signal_dspin_h_cla_inc =
526      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_h_cla_inc", X_SIZE-1, Y_SIZE);
527   DspinSignals<dspin_cmd_width>** signal_dspin_h_cla_dec =
528      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_h_cla_dec", X_SIZE-1, Y_SIZE);
529
530   // Vertical inter-clusters DSPIN signals
531   DspinSignals<dspin_cmd_width>** signal_dspin_v_cmd_inc =
532      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_v_cmd_inc", X_SIZE, Y_SIZE-1);
533   DspinSignals<dspin_cmd_width>** signal_dspin_v_cmd_dec =
534      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_v_cmd_dec", X_SIZE, Y_SIZE-1);
535
536   DspinSignals<dspin_rsp_width>** signal_dspin_v_rsp_inc =
537      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_v_rsp_inc", X_SIZE, Y_SIZE-1);
538   DspinSignals<dspin_rsp_width>** signal_dspin_v_rsp_dec =
539      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_v_rsp_dec", X_SIZE, Y_SIZE-1);
540
541   DspinSignals<dspin_cmd_width>** signal_dspin_v_m2p_inc =
542      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_v_m2p_inc", X_SIZE, Y_SIZE-1);
543   DspinSignals<dspin_cmd_width>** signal_dspin_v_m2p_dec =
544      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_v_m2p_dec", X_SIZE, Y_SIZE-1);
545
546   DspinSignals<dspin_rsp_width>** signal_dspin_v_p2m_inc =
547      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_v_p2m_inc", X_SIZE, Y_SIZE-1);
548   DspinSignals<dspin_rsp_width>** signal_dspin_v_p2m_dec =
549      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_v_p2m_dec", X_SIZE, Y_SIZE-1);
550
551   DspinSignals<dspin_cmd_width>** signal_dspin_v_cla_inc =
552      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_v_cla_inc", X_SIZE, Y_SIZE-1);
553   DspinSignals<dspin_cmd_width>** signal_dspin_v_cla_dec =
554      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_v_cla_dec", X_SIZE, Y_SIZE-1);
555
556   // Mesh boundaries DSPIN signals (Most of those signals are not used...)
557   DspinSignals<dspin_cmd_width>*** signal_dspin_bound_cmd_in =
558      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_bound_cmd_in" , X_SIZE, Y_SIZE, 4);
559   DspinSignals<dspin_cmd_width>*** signal_dspin_bound_cmd_out =
560      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_bound_cmd_out", X_SIZE, Y_SIZE, 4);
561
562   DspinSignals<dspin_rsp_width>*** signal_dspin_bound_rsp_in =
563      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_bound_rsp_in" , X_SIZE, Y_SIZE, 4);
564   DspinSignals<dspin_rsp_width>*** signal_dspin_bound_rsp_out =
565      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_bound_rsp_out", X_SIZE, Y_SIZE, 4);
566
567   DspinSignals<dspin_cmd_width>*** signal_dspin_bound_m2p_in =
568      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_bound_m2p_in" , X_SIZE, Y_SIZE, 4);
569   DspinSignals<dspin_cmd_width>*** signal_dspin_bound_m2p_out =
570      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_bound_m2p_out", X_SIZE, Y_SIZE, 4);
571
572   DspinSignals<dspin_rsp_width>*** signal_dspin_bound_p2m_in =
573      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_bound_p2m_in" , X_SIZE, Y_SIZE, 4);
574   DspinSignals<dspin_rsp_width>*** signal_dspin_bound_p2m_out =
575      alloc_elems<DspinSignals<dspin_rsp_width> >("signal_dspin_bound_p2m_out", X_SIZE, Y_SIZE, 4);
576
577   DspinSignals<dspin_cmd_width>*** signal_dspin_bound_cla_in =
578      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_bound_cla_in" , X_SIZE, Y_SIZE, 4);
579   DspinSignals<dspin_cmd_width>*** signal_dspin_bound_cla_out =
580      alloc_elems<DspinSignals<dspin_cmd_width> >("signal_dspin_bound_cla_out", X_SIZE, Y_SIZE, 4);
581
582   // VCI signals for iobus and peripherals
583   VciSignals<vci_param_int>    signal_vci_ini_bdev("signal_vci_ini_bdev");
584   VciSignals<vci_param_int>    signal_vci_ini_cdma("signal_vci_ini_cdma");
585   VciSignals<vci_param_int>    signal_vci_ini_iopi("signal_vci_ini_iopi");
586
587   VciSignals<vci_param_int>*   signal_vci_ini_proc =
588       alloc_elems<VciSignals<vci_param_int> >("signal_vci_ini_proc", NB_PROCS_MAX );
589
590   VciSignals<vci_param_int>    signal_vci_tgt_memc("signal_vci_tgt_memc");
591   VciSignals<vci_param_int>    signal_vci_tgt_xicu("signal_vci_tgt_xicu");
592   VciSignals<vci_param_int>    signal_vci_tgt_bdev("signal_vci_tgt_bdev");
593   VciSignals<vci_param_int>    signal_vci_tgt_mtty("signal_vci_tgt_mtty");
594   VciSignals<vci_param_int>    signal_vci_tgt_fbuf("signal_vci_tgt_fbuf");
595   VciSignals<vci_param_int>    signal_vci_tgt_mnic("signal_vci_tgt_mnic");
596   VciSignals<vci_param_int>    signal_vci_tgt_cdma("signal_vci_tgt_cdma");
597   VciSignals<vci_param_int>    signal_vci_tgt_iopi("signal_vci_tgt_iopi");
598
599   VciSignals<vci_param_int>    signal_vci_cmd_to_noc("signal_vci_cmd_to_noc");
600   VciSignals<vci_param_int>    signal_vci_cmd_from_noc("signal_vci_cmd_from_noc");
601
602   ////////////////////////////
603   //      Loader
604   ////////////////////////////
605
606#if USE_IOC_RDK
607   std::ostringstream ramdisk_name;
608   ramdisk_name << disk_name << "@" << std::hex << SEG_RDK_BASE << ":";
609   soclib::common::Loader loader( soft_name, ramdisk_name.str().c_str() );
610#else
611   soclib::common::Loader loader( soft_name );
612#endif
613   loader.memory_default(0xAA);
614
615   ///////////////////////////
616   //  processor iss
617   ///////////////////////////
618
619   typedef soclib::common::GdbServer<soclib::common::Mips32ElIss> proc_iss;
620   proc_iss::set_loader( loader );
621
622   //////////////////////////////////////////////////////////////
623   // mesh construction: only (X_SIZE) * (Y_SIZE) clusters
624   //////////////////////////////////////////////////////////////
625
626   TsarLetiCluster<dspin_cmd_width,
627                   dspin_rsp_width,
628                   vci_param_int,
629                   vci_param_ext>*          clusters[X_SIZE][Y_SIZE];
630
631#if USE_OPENMP
632#pragma omp parallel
633    {
634#pragma omp for
635#endif
636        for (size_t i = 0; i  < (X_SIZE * (Y_SIZE)); i++)
637        {
638            size_t x = i / (Y_SIZE);
639            size_t y = i % (Y_SIZE);
640
641#if USE_OPENMP
642#pragma omp critical
643            {
644#endif
645            std::cout << std::endl;
646            std::cout << "Cluster_" << std::dec << x << "_" << y
647                      << " with cluster_xy = " << std::hex << cluster(x,y) << std::endl;
648            std::cout << std::endl;
649
650            std::ostringstream cluster_name;
651            cluster_name <<  "cluster_" << std::dec << x << "_" << y;
652
653            clusters[x][y] = new TsarLetiCluster<dspin_cmd_width,
654                                                 dspin_rsp_width,
655                                                 vci_param_int,
656                                                 vci_param_ext>
657            (
658                cluster_name.str().c_str(),
659                NB_PROCS_MAX,
660                x,
661                y,
662                cluster(x,y),
663                maptabd,
664                maptabx,
665                RESET_ADDRESS,
666                X_WIDTH,
667                Y_WIDTH,
668                vci_srcid_width - X_WIDTH - Y_WIDTH,   // l_id width,
669                P_WIDTH,
670                MEMC_TGTID,
671                XICU_TGTID,
672                MTTY_TGTID,
673                BDEV_TGTID,
674                disk_name,
675                MEMC_WAYS,
676                MEMC_SETS,
677                L1_IWAYS,
678                L1_ISETS,
679                L1_DWAYS,
680                L1_DSETS,
681                XRAM_LATENCY,
682                loader,
683                frozen_cycles,
684                trace_from,
685                trace_proc_ok,
686                trace_proc_id,
687                trace_memc_ok,
688                trace_memc_id
689            );
690
691#if USE_OPENMP
692            } // end critical
693#endif
694        } // end for
695#if USE_OPENMP
696    }
697#endif
698
699    //////////////////////////////////////////////////////////////////
700    // IO bus and external peripherals in cluster[X_SIZE-1,Y_SIZE]
701    // - 6 local targets    : FBF, TTY, CMA, NIC, PIC, IOC
702    // - 3 local initiators : IOC, CMA, PIC
703    // There is no PROC, no MEMC and no XICU in this cluster,
704    // but the crossbar has (NB_PROCS_MAX + 3) intiators and
705    // 8 targets, in order to use the same SRCID and TGTID space
706    // (same mapping table for the internal components,
707    //  and for the external peripherals)
708    //////////////////////////////////////////////////////////////////
709
710    std::cout << std::endl;
711    std::cout << " Building IO cluster (external peripherals)" << std::endl;
712    std::cout << std::endl;
713
714    size_t cluster_io = cluster(X_SIZE-1, Y_SIZE);
715
716    //////////// vci_local_crossbar
717    VciLocalCrossbar<vci_param_int>*
718    iobus = new VciLocalCrossbar<vci_param_int>(
719                "iobus",
720                maptabd,                      // mapping table
721                cluster_io,                   // cluster_xy
722                NB_PROCS_MAX + 3,             // number of local initiators
723                8,                            // number of local targets
724                BDEV_TGTID );                 // default target index
725
726    //////////// vci_framebuffer
727    VciFrameBuffer<vci_param_int>*
728    fbuf = new VciFrameBuffer<vci_param_int>(
729                "fbuf",
730                IntTab(cluster_io, FBUF_TGTID),
731                maptabd,
732                FBUF_X_SIZE, FBUF_Y_SIZE );
733
734    ////////////  vci_block_device
735    VciBlockDeviceTsar<vci_param_int>*
736    bdev = new VciBlockDeviceTsar<vci_param_int>(
737                "bdev",
738                maptabd,
739                IntTab(cluster_io, BDEV_SRCID),
740                IntTab(cluster_io, BDEV_TGTID),
741                disk_name,
742                512,                          // block size
743                64 );                         // burst size
744
745    //////////// vci_multi_nic
746    VciMultiNic<vci_param_int>*
747    mnic = new VciMultiNic<vci_param_int>(
748             "mnic",
749                IntTab(cluster_io, MNIC_TGTID),
750                maptabd,
751                NB_NIC_CHANNELS,
752                NIC_MAC4,
753                NIC_MAC2,
754                NIC_RX_NAME,
755                NIC_TX_NAME );
756
757    ///////////// vci_chbuf_dma
758    VciChbufDma<vci_param_int>*
759    cdma = new VciChbufDma<vci_param_int>(
760                "cdma",
761                maptabd,
762                IntTab(cluster_io, CDMA_SRCID),
763                IntTab(cluster_io, CDMA_TGTID),
764                64,                          // burst size
765                NB_CMA_CHANNELS );
766
767    ////////////// vci_multi_tty
768    std::vector<std::string> vect_names;
769    for (size_t id = 0; id < NB_TTY_CHANNELS; id++)
770    {
771        std::ostringstream term_name;
772        term_name <<  "ext_" << id;
773        vect_names.push_back(term_name.str().c_str());
774    }
775
776    VciMultiTty<vci_param_int>*
777    mtty = new VciMultiTty<vci_param_int>(
778                "mtty",
779                IntTab(cluster_io, MTTY_TGTID),
780                maptabd,
781                vect_names );
782
783    ///////////// vci_iopic
784    VciIopic<vci_param_int>*
785    iopic = new VciIopic<vci_param_int>(
786                "iopic",
787                maptabd,
788                IntTab(cluster_io, IOPI_SRCID),
789                IntTab(cluster_io, IOPI_TGTID),
790                32 );
791
792    ////////////// vci_dspin wrappers
793    VciDspinTargetWrapper<vci_param_int, dspin_cmd_width, dspin_rsp_width>*
794    wt_iobus = new VciDspinTargetWrapper<vci_param_int, dspin_cmd_width, dspin_rsp_width>(
795                "wt_bdev",
796                vci_srcid_width );
797
798    VciDspinInitiatorWrapper<vci_param_int, dspin_cmd_width, dspin_rsp_width>*
799    wi_iobus = new VciDspinInitiatorWrapper<vci_param_int, dspin_cmd_width, dspin_rsp_width>(
800                "wi_bdev",
801                vci_srcid_width );
802
803    ///////////////////////////////////////////////////////////////
804    //     Net-list
805    ///////////////////////////////////////////////////////////////
806
807    // iobus
808    iobus->p_clk                       (signal_clk);
809    iobus->p_resetn                    (signal_resetn);
810
811    iobus->p_target_to_up              (signal_vci_cmd_from_noc);
812    iobus->p_initiator_to_up           (signal_vci_cmd_to_noc);
813
814    iobus->p_to_target[MEMC_TGTID]     (signal_vci_tgt_memc);
815    iobus->p_to_target[XICU_TGTID]     (signal_vci_tgt_xicu);
816    iobus->p_to_target[MTTY_TGTID]     (signal_vci_tgt_mtty);
817    iobus->p_to_target[FBUF_TGTID]     (signal_vci_tgt_fbuf);
818    iobus->p_to_target[MNIC_TGTID]     (signal_vci_tgt_mnic);
819    iobus->p_to_target[BDEV_TGTID]     (signal_vci_tgt_bdev);
820    iobus->p_to_target[CDMA_TGTID]     (signal_vci_tgt_cdma);
821    iobus->p_to_target[IOPI_TGTID]     (signal_vci_tgt_iopi);
822
823    for( size_t p=0 ; p<NB_PROCS_MAX ; p++ )
824    {
825        iobus->p_to_initiator[p]       (signal_vci_ini_proc[p]);
826    }
827    iobus->p_to_initiator[BDEV_SRCID]  (signal_vci_ini_bdev);
828    iobus->p_to_initiator[CDMA_SRCID]  (signal_vci_ini_cdma);
829    iobus->p_to_initiator[IOPI_SRCID]  (signal_vci_ini_iopi);
830
831    std::cout << "  - IOBUS connected" << std::endl;
832
833    // block_device
834    bdev->p_clk                        (signal_clk);
835    bdev->p_resetn                     (signal_resetn);
836    bdev->p_vci_target                 (signal_vci_tgt_bdev);
837    bdev->p_vci_initiator              (signal_vci_ini_bdev);
838    bdev->p_irq                        (signal_irq_bdev);
839
840    std::cout << "  - BDEV connected" << std::endl;
841
842    // frame_buffer
843    fbuf->p_clk                        (signal_clk);
844    fbuf->p_resetn                     (signal_resetn);
845    fbuf->p_vci                        (signal_vci_tgt_fbuf);
846
847    std::cout << "  - FBUF connected" << std::endl;
848
849    // multi_nic
850    mnic->p_clk                        (signal_clk);
851    mnic->p_resetn                     (signal_resetn);
852    mnic->p_vci                        (signal_vci_tgt_mnic);
853    for ( size_t i=0 ; i<NB_NIC_CHANNELS ; i++ )
854    {
855         mnic->p_rx_irq[i]             (signal_irq_mnic_rx[i]);
856         mnic->p_tx_irq[i]             (signal_irq_mnic_tx[i]);
857    }
858
859    std::cout << "  - MNIC connected" << std::endl;
860
861    // chbuf_dma
862    cdma->p_clk                        (signal_clk);
863    cdma->p_resetn                     (signal_resetn);
864    cdma->p_vci_target                 (signal_vci_tgt_cdma);
865    cdma->p_vci_initiator              (signal_vci_ini_cdma);
866    for ( size_t i=0 ; i<NB_CMA_CHANNELS ; i++)
867    {
868        cdma->p_irq[i]                 (signal_irq_cdma[i]);
869    }
870
871    std::cout << "  - CDMA connected" << std::endl;
872
873    // multi_tty
874    mtty->p_clk                        (signal_clk);
875    mtty->p_resetn                     (signal_resetn);
876    mtty->p_vci                        (signal_vci_tgt_mtty);
877    for ( size_t i=0 ; i<NB_TTY_CHANNELS ; i++ )
878    {
879        mtty->p_irq[i]                  (signal_irq_mtty_rx[i]);
880    }
881
882    std::cout << "  - MTTY connected" << std::endl;
883
884    // iopic
885    // NB_NIC_CHANNELS <= 2
886    // NB_CMA_CHANNELS <= 4
887    // NB_TTY_CHANNELS <= 8
888    iopic->p_clk                       (signal_clk);
889    iopic->p_resetn                    (signal_resetn);
890    iopic->p_vci_target                (signal_vci_tgt_iopi);
891    iopic->p_vci_initiator             (signal_vci_ini_iopi);
892    for ( size_t i=0 ; i<32 ; i++)
893    {
894       if     (i < NB_NIC_CHANNELS)    iopic->p_hwi[i] (signal_irq_mnic_rx[i]);
895       else if(i < 2 )                 iopic->p_hwi[i] (signal_irq_false);
896       else if(i < 2+NB_NIC_CHANNELS)  iopic->p_hwi[i] (signal_irq_mnic_tx[i-2]);
897       else if(i < 4 )                 iopic->p_hwi[i] (signal_irq_false);
898       else if(i < 4+NB_CMA_CHANNELS)  iopic->p_hwi[i] (signal_irq_cdma[i-4]);
899       else if(i < 8)                  iopic->p_hwi[i] (signal_irq_false);
900       else if(i == 8)                 iopic->p_hwi[i] (signal_irq_bdev);
901       else if(i < 16)                 iopic->p_hwi[i] (signal_irq_false);
902       else if(i < 16+NB_TTY_CHANNELS) iopic->p_hwi[i] (signal_irq_mtty_rx[i-16]);
903       else if(i < 24)                 iopic->p_hwi[i] (signal_irq_false);
904       else if(i < 24+NB_TTY_CHANNELS) iopic->p_hwi[i] (signal_irq_false);
905//     else if(i < 24+NB_TTY_CHANNELS) iopic->p_hwi[i] (signal_irq_mtty_tx[i-24]);
906       else                            iopic->p_hwi[i] (signal_irq_false);
907    }
908
909    std::cout << "  - IOPIC connected" << std::endl;
910
911    // vci/dspin wrappers
912    wi_iobus->p_clk                    (signal_clk);
913    wi_iobus->p_resetn                 (signal_resetn);
914    wi_iobus->p_vci                    (signal_vci_cmd_to_noc);
915    wi_iobus->p_dspin_cmd              (signal_dspin_bound_cmd_in[X_SIZE-1][Y_SIZE-1][NORTH]);
916    wi_iobus->p_dspin_rsp              (signal_dspin_bound_rsp_out[X_SIZE-1][Y_SIZE-1][NORTH]);
917
918    // vci/dspin wrappers
919    wt_iobus->p_clk                    (signal_clk);
920    wt_iobus->p_resetn                 (signal_resetn);
921    wt_iobus->p_vci                    (signal_vci_cmd_from_noc);
922    wt_iobus->p_dspin_cmd              (signal_dspin_bound_cmd_out[X_SIZE-1][Y_SIZE-1][NORTH]);
923    wt_iobus->p_dspin_rsp              (signal_dspin_bound_rsp_in[X_SIZE-1][Y_SIZE-1][NORTH]);
924
925    // Clock & RESET for clusters
926    for (size_t x = 0; x < (X_SIZE); x++)
927    {
928        for (size_t y = 0; y < (Y_SIZE); y++)
929        {
930            clusters[x][y]->p_clk                    (signal_clk);
931            clusters[x][y]->p_resetn                 (signal_resetn);
932        }
933    }
934
935    // Inter Clusters horizontal connections
936    if (X_SIZE > 1)
937    {
938        for (size_t x = 0; x < (X_SIZE-1); x++)
939        {
940            for (size_t y = 0; y < (Y_SIZE); y++)
941            {
942                clusters[x][y]->p_cmd_out[EAST]      (signal_dspin_h_cmd_inc[x][y]);
943                clusters[x+1][y]->p_cmd_in[WEST]     (signal_dspin_h_cmd_inc[x][y]);
944                clusters[x][y]->p_cmd_in[EAST]       (signal_dspin_h_cmd_dec[x][y]);
945                clusters[x+1][y]->p_cmd_out[WEST]    (signal_dspin_h_cmd_dec[x][y]);
946
947                clusters[x][y]->p_rsp_out[EAST]      (signal_dspin_h_rsp_inc[x][y]);
948                clusters[x+1][y]->p_rsp_in[WEST]     (signal_dspin_h_rsp_inc[x][y]);
949                clusters[x][y]->p_rsp_in[EAST]       (signal_dspin_h_rsp_dec[x][y]);
950                clusters[x+1][y]->p_rsp_out[WEST]    (signal_dspin_h_rsp_dec[x][y]);
951
952                clusters[x][y]->p_m2p_out[EAST]      (signal_dspin_h_m2p_inc[x][y]);
953                clusters[x+1][y]->p_m2p_in[WEST]     (signal_dspin_h_m2p_inc[x][y]);
954                clusters[x][y]->p_m2p_in[EAST]       (signal_dspin_h_m2p_dec[x][y]);
955                clusters[x+1][y]->p_m2p_out[WEST]    (signal_dspin_h_m2p_dec[x][y]);
956
957                clusters[x][y]->p_p2m_out[EAST]      (signal_dspin_h_p2m_inc[x][y]);
958                clusters[x+1][y]->p_p2m_in[WEST]     (signal_dspin_h_p2m_inc[x][y]);
959                clusters[x][y]->p_p2m_in[EAST]       (signal_dspin_h_p2m_dec[x][y]);
960                clusters[x+1][y]->p_p2m_out[WEST]    (signal_dspin_h_p2m_dec[x][y]);
961
962                clusters[x][y]->p_cla_out[EAST]      (signal_dspin_h_cla_inc[x][y]);
963                clusters[x+1][y]->p_cla_in[WEST]     (signal_dspin_h_cla_inc[x][y]);
964                clusters[x][y]->p_cla_in[EAST]       (signal_dspin_h_cla_dec[x][y]);
965                clusters[x+1][y]->p_cla_out[WEST]    (signal_dspin_h_cla_dec[x][y]);
966            }
967        }
968    }
969    std::cout << std::endl << "Horizontal connections done" << std::endl;
970
971    // Inter Clusters vertical connections
972    if (Y_SIZE > 1)
973    {
974        for (size_t y = 0; y < (Y_SIZE-1); y++)
975        {
976            for (size_t x = 0; x < X_SIZE; x++)
977            {
978                clusters[x][y]->p_cmd_out[NORTH]     (signal_dspin_v_cmd_inc[x][y]);
979                clusters[x][y+1]->p_cmd_in[SOUTH]    (signal_dspin_v_cmd_inc[x][y]);
980                clusters[x][y]->p_cmd_in[NORTH]      (signal_dspin_v_cmd_dec[x][y]);
981                clusters[x][y+1]->p_cmd_out[SOUTH]   (signal_dspin_v_cmd_dec[x][y]);
982
983                clusters[x][y]->p_rsp_out[NORTH]     (signal_dspin_v_rsp_inc[x][y]);
984                clusters[x][y+1]->p_rsp_in[SOUTH]    (signal_dspin_v_rsp_inc[x][y]);
985                clusters[x][y]->p_rsp_in[NORTH]      (signal_dspin_v_rsp_dec[x][y]);
986                clusters[x][y+1]->p_rsp_out[SOUTH]   (signal_dspin_v_rsp_dec[x][y]);
987
988                clusters[x][y]->p_m2p_out[NORTH]     (signal_dspin_v_m2p_inc[x][y]);
989                clusters[x][y+1]->p_m2p_in[SOUTH]    (signal_dspin_v_m2p_inc[x][y]);
990                clusters[x][y]->p_m2p_in[NORTH]      (signal_dspin_v_m2p_dec[x][y]);
991                clusters[x][y+1]->p_m2p_out[SOUTH]   (signal_dspin_v_m2p_dec[x][y]);
992
993                clusters[x][y]->p_p2m_out[NORTH]     (signal_dspin_v_p2m_inc[x][y]);
994                clusters[x][y+1]->p_p2m_in[SOUTH]    (signal_dspin_v_p2m_inc[x][y]);
995                clusters[x][y]->p_p2m_in[NORTH]      (signal_dspin_v_p2m_dec[x][y]);
996                clusters[x][y+1]->p_p2m_out[SOUTH]   (signal_dspin_v_p2m_dec[x][y]);
997
998                clusters[x][y]->p_cla_out[NORTH]     (signal_dspin_v_cla_inc[x][y]);
999                clusters[x][y+1]->p_cla_in[SOUTH]    (signal_dspin_v_cla_inc[x][y]);
1000                clusters[x][y]->p_cla_in[NORTH]      (signal_dspin_v_cla_dec[x][y]);
1001                clusters[x][y+1]->p_cla_out[SOUTH]   (signal_dspin_v_cla_dec[x][y]);
1002            }
1003        }
1004    }
1005    std::cout << std::endl << "Vertical connections done" << std::endl;
1006
1007    // East & West boundary cluster connections
1008    for (size_t y = 0; y < (Y_SIZE); y++)
1009    {
1010        clusters[0][y]->p_cmd_in[WEST]           (signal_dspin_bound_cmd_in[0][y][WEST]);
1011        clusters[0][y]->p_cmd_out[WEST]          (signal_dspin_bound_cmd_out[0][y][WEST]);
1012        clusters[X_SIZE-1][y]->p_cmd_in[EAST]    (signal_dspin_bound_cmd_in[X_SIZE-1][y][EAST]);
1013        clusters[X_SIZE-1][y]->p_cmd_out[EAST]   (signal_dspin_bound_cmd_out[X_SIZE-1][y][EAST]);
1014
1015        clusters[0][y]->p_rsp_in[WEST]           (signal_dspin_bound_rsp_in[0][y][WEST]);
1016        clusters[0][y]->p_rsp_out[WEST]          (signal_dspin_bound_rsp_out[0][y][WEST]);
1017        clusters[X_SIZE-1][y]->p_rsp_in[EAST]    (signal_dspin_bound_rsp_in[X_SIZE-1][y][EAST]);
1018        clusters[X_SIZE-1][y]->p_rsp_out[EAST]   (signal_dspin_bound_rsp_out[X_SIZE-1][y][EAST]);
1019
1020        clusters[0][y]->p_m2p_in[WEST]           (signal_dspin_bound_m2p_in[0][y][WEST]);
1021        clusters[0][y]->p_m2p_out[WEST]          (signal_dspin_bound_m2p_out[0][y][WEST]);
1022        clusters[X_SIZE-1][y]->p_m2p_in[EAST]    (signal_dspin_bound_m2p_in[X_SIZE-1][y][EAST]);
1023        clusters[X_SIZE-1][y]->p_m2p_out[EAST]   (signal_dspin_bound_m2p_out[X_SIZE-1][y][EAST]);
1024
1025        clusters[0][y]->p_p2m_in[WEST]           (signal_dspin_bound_p2m_in[0][y][WEST]);
1026        clusters[0][y]->p_p2m_out[WEST]          (signal_dspin_bound_p2m_out[0][y][WEST]);
1027        clusters[X_SIZE-1][y]->p_p2m_in[EAST]    (signal_dspin_bound_p2m_in[X_SIZE-1][y][EAST]);
1028        clusters[X_SIZE-1][y]->p_p2m_out[EAST]   (signal_dspin_bound_p2m_out[X_SIZE-1][y][EAST]);
1029
1030        clusters[0][y]->p_cla_in[WEST]           (signal_dspin_bound_cla_in[0][y][WEST]);
1031        clusters[0][y]->p_cla_out[WEST]          (signal_dspin_bound_cla_out[0][y][WEST]);
1032        clusters[X_SIZE-1][y]->p_cla_in[EAST]    (signal_dspin_bound_cla_in[X_SIZE-1][y][EAST]);
1033        clusters[X_SIZE-1][y]->p_cla_out[EAST]   (signal_dspin_bound_cla_out[X_SIZE-1][y][EAST]);
1034    }
1035
1036    std::cout << std::endl << "West & East boundaries connections done" << std::endl;
1037
1038    // North & South boundary clusters connections
1039    for (size_t x = 0; x < X_SIZE; x++)
1040    {
1041        clusters[x][0]->p_cmd_in[SOUTH]          (signal_dspin_bound_cmd_in[x][0][SOUTH]);
1042        clusters[x][0]->p_cmd_out[SOUTH]         (signal_dspin_bound_cmd_out[x][0][SOUTH]);
1043        clusters[x][Y_SIZE-1]->p_cmd_in[NORTH]   (signal_dspin_bound_cmd_in[x][Y_SIZE-1][NORTH]);
1044        clusters[x][Y_SIZE-1]->p_cmd_out[NORTH]  (signal_dspin_bound_cmd_out[x][Y_SIZE-1][NORTH]);
1045
1046        clusters[x][0]->p_rsp_in[SOUTH]          (signal_dspin_bound_rsp_in[x][0][SOUTH]);
1047        clusters[x][0]->p_rsp_out[SOUTH]         (signal_dspin_bound_rsp_out[x][0][SOUTH]);
1048        clusters[x][Y_SIZE-1]->p_rsp_in[NORTH]   (signal_dspin_bound_rsp_in[x][Y_SIZE-1][NORTH]);
1049        clusters[x][Y_SIZE-1]->p_rsp_out[NORTH]  (signal_dspin_bound_rsp_out[x][Y_SIZE-1][NORTH]);
1050
1051        clusters[x][0]->p_m2p_in[SOUTH]          (signal_dspin_bound_m2p_in[x][0][SOUTH]);
1052        clusters[x][0]->p_m2p_out[SOUTH]         (signal_dspin_bound_m2p_out[x][0][SOUTH]);
1053        clusters[x][Y_SIZE-1]->p_m2p_in[NORTH]   (signal_dspin_bound_m2p_in[x][Y_SIZE-1][NORTH]);
1054        clusters[x][Y_SIZE-1]->p_m2p_out[NORTH]  (signal_dspin_bound_m2p_out[x][Y_SIZE-1][NORTH]);
1055
1056        clusters[x][0]->p_p2m_in[SOUTH]          (signal_dspin_bound_p2m_in[x][0][SOUTH]);
1057        clusters[x][0]->p_p2m_out[SOUTH]         (signal_dspin_bound_p2m_out[x][0][SOUTH]);
1058        clusters[x][Y_SIZE-1]->p_p2m_in[NORTH]   (signal_dspin_bound_p2m_in[x][Y_SIZE-1][NORTH]);
1059        clusters[x][Y_SIZE-1]->p_p2m_out[NORTH]  (signal_dspin_bound_p2m_out[x][Y_SIZE-1][NORTH]);
1060
1061        clusters[x][0]->p_cla_in[SOUTH]          (signal_dspin_bound_cla_in[x][0][SOUTH]);
1062        clusters[x][0]->p_cla_out[SOUTH]         (signal_dspin_bound_cla_out[x][0][SOUTH]);
1063        clusters[x][Y_SIZE-1]->p_cla_in[NORTH]   (signal_dspin_bound_cla_in[x][Y_SIZE-1][NORTH]);
1064        clusters[x][Y_SIZE-1]->p_cla_out[NORTH]  (signal_dspin_bound_cla_out[x][Y_SIZE-1][NORTH]);
1065    }
1066
1067    std::cout << std::endl << "North & South boundaries connections done" << std::endl;
1068
1069    std::cout << std::endl;
1070
1071    ////////////////////////////////////////////////////////
1072    //   Simulation
1073    ///////////////////////////////////////////////////////
1074
1075    sc_start(sc_core::sc_time(0, SC_NS));
1076    signal_resetn    = false;
1077    signal_irq_false = false;
1078
1079    // set network boundaries signals default values
1080    // for all boundary clusters but the IO cluster
1081    for (size_t x = 0; x < X_SIZE ; x++)
1082    {
1083        for (size_t y = 0; y < Y_SIZE ; y++)
1084        {
1085            for (size_t face = 0; face < 4; face++)
1086            {
1087                if ( (x != X_SIZE-1) or (y != Y_SIZE-1) or (face != NORTH) )
1088                {
1089                    signal_dspin_bound_cmd_in [x][y][face].write = false;
1090                    signal_dspin_bound_cmd_in [x][y][face].read  = true;
1091                    signal_dspin_bound_cmd_out[x][y][face].write = false;
1092                    signal_dspin_bound_cmd_out[x][y][face].read  = true;
1093
1094                    signal_dspin_bound_rsp_in [x][y][face].write = false;
1095                    signal_dspin_bound_rsp_in [x][y][face].read  = true;
1096                    signal_dspin_bound_rsp_out[x][y][face].write = false;
1097                    signal_dspin_bound_rsp_out[x][y][face].read  = true;
1098                }
1099
1100                signal_dspin_bound_m2p_in [x][y][face].write = false;
1101                signal_dspin_bound_m2p_in [x][y][face].read  = true;
1102                signal_dspin_bound_m2p_out[x][y][face].write = false;
1103                signal_dspin_bound_m2p_out[x][y][face].read  = true;
1104
1105                signal_dspin_bound_p2m_in [x][y][face].write = false;
1106                signal_dspin_bound_p2m_in [x][y][face].read  = true;
1107                signal_dspin_bound_p2m_out[x][y][face].write = false;
1108                signal_dspin_bound_p2m_out[x][y][face].read  = true;
1109
1110                signal_dspin_bound_cla_in [x][y][face].write = false;
1111                signal_dspin_bound_cla_in [x][y][face].read  = true;
1112                signal_dspin_bound_cla_out[x][y][face].write = false;
1113                signal_dspin_bound_cla_out[x][y][face].read  = true;
1114            }
1115        }
1116    }
1117
1118    // set default values for VCI signals connected to unused ports on iobus
1119    signal_vci_tgt_memc.rspval = false;
1120    signal_vci_tgt_xicu.rspval = false;
1121    for ( size_t p = 0 ; p < NB_PROCS_MAX ; p++ ) signal_vci_ini_proc[p].cmdval = false;
1122
1123    sc_start(sc_core::sc_time(1, SC_NS));
1124    signal_resetn = true;
1125
1126    if (gettimeofday(&t1, NULL) != 0)
1127    {
1128        perror("gettimeofday");
1129        return EXIT_FAILURE;
1130    }
1131
1132    // variable used for IRQ trace
1133    bool prev_irq_bdev = false;
1134    bool prev_irq_mtty_rx[8];
1135    bool prev_irq_proc[16][16][4];
1136
1137    for( size_t x = 0 ; x<8  ; x++ ) prev_irq_mtty_rx[x] = false;
1138
1139    for( size_t x = 0 ; x<16 ; x++ )
1140    for( size_t y = 0 ; y<16 ; y++ )
1141    for( size_t i = 0 ; i<4  ; i++ ) prev_irq_proc[x][y][i] = false;
1142
1143    for (uint64_t n = 1; n < ncycles && !stop_called; n++)
1144    {
1145        // Monitor a specific address for L1 & L2 caches
1146        // clusters[0][0]->proc[0]->cache_monitor(0x110002C078ULL);
1147        // clusters[1][1]->memc->cache_monitor(0x110002c078ULL);
1148
1149        // stats display
1150        if( (n % 5000000) == 0)
1151        {
1152
1153            if (gettimeofday(&t2, NULL) != 0)
1154            {
1155                perror("gettimeofday");
1156                return EXIT_FAILURE;
1157            }
1158
1159            ms1 = (uint64_t) t1.tv_sec * 1000ULL + (uint64_t) t1.tv_usec / 1000;
1160            ms2 = (uint64_t) t2.tv_sec * 1000ULL + (uint64_t) t2.tv_usec / 1000;
1161            std::cerr << "platform clock frequency "
1162                      << (double) 5000000 / (double) (ms2 - ms1) << "Khz" << std::endl;
1163
1164            if (gettimeofday(&t1, NULL) != 0)
1165            {
1166                perror("gettimeofday");
1167                return EXIT_FAILURE;
1168            }
1169        }
1170
1171        // trace display
1172        if ( trace_ok and (n > trace_from) )
1173        {
1174            std::cout << "****************** cycle " << std::dec << n ;
1175            std::cout << " ************************************************" << std::endl;
1176
1177            size_t l = 0;
1178            size_t x = 0;
1179            size_t y = 0;
1180
1181            if ( trace_proc_ok )
1182            {
1183                l = trace_proc_id & ((1<<P_WIDTH)-1) ;
1184                x = (trace_proc_id >> P_WIDTH) >> Y_WIDTH ;
1185                y = (trace_proc_id >> P_WIDTH) & ((1<<Y_WIDTH) - 1);
1186
1187                std::ostringstream proc_signame;
1188                proc_signame << "[SIG]PROC_" << x << "_" << y << "_" << l ;
1189                clusters[x][y]->proc[l]->print_trace(1);
1190                clusters[x][y]->signal_vci_ini_proc[l].print_trace(proc_signame.str());
1191
1192                std::ostringstream xicu_signame;
1193                xicu_signame << "[SIG]XICU_" << x << "_" << y ;
1194                clusters[x][y]->xicu->print_trace(0);
1195                clusters[x][y]->signal_vci_tgt_xicu.print_trace(xicu_signame.str());
1196            }
1197
1198            if ( trace_memc_ok )
1199            {
1200                x = trace_memc_id >> Y_WIDTH;
1201                y = trace_memc_id & ((1<<Y_WIDTH) - 1);
1202
1203                std::ostringstream smemc;
1204                smemc << "[SIG]MEMC_" << x << "_" << y;
1205                std::ostringstream sxram;
1206                sxram << "[SIG]XRAM_" << x << "_" << y;
1207
1208                clusters[x][y]->memc->print_trace();
1209                clusters[x][y]->signal_vci_tgt_memc.print_trace(smemc.str());
1210                clusters[x][y]->signal_vci_xram.print_trace(sxram.str());
1211            }
1212
1213            // trace coherence signals
1214            // clusters[0][0]->signal_dspin_m2p_proc[0].print_trace("[CC_M2P_0_0]");
1215            // clusters[0][1]->signal_dspin_m2p_proc[0].print_trace("[CC_M2P_0_1]");
1216            // clusters[1][0]->signal_dspin_m2p_proc[0].print_trace("[CC_M2P_1_0]");
1217            // clusters[1][1]->signal_dspin_m2p_proc[0].print_trace("[CC_M2P_1_1]");
1218
1219            // clusters[0][0]->signal_dspin_p2m_proc[0].print_trace("[CC_P2M_0_0]");
1220            // clusters[0][1]->signal_dspin_p2m_proc[0].print_trace("[CC_P2M_0_1]");
1221            // clusters[1][0]->signal_dspin_p2m_proc[0].print_trace("[CC_P2M_1_0]");
1222            // clusters[1][1]->signal_dspin_p2m_proc[0].print_trace("[CC_P2M_1_1]");
1223
1224            // trace xbar(s) m2p
1225            // clusters[0][0]->xbar_m2p->print_trace();
1226            // clusters[1][0]->xbar_m2p->print_trace();
1227            // clusters[0][1]->xbar_m2p->print_trace();
1228            // clusters[1][1]->xbar_m2p->print_trace();
1229
1230            // trace router(s) m2p
1231            // clusters[0][0]->router_m2p->print_trace();
1232            // clusters[1][0]->router_m2p->print_trace();
1233            // clusters[0][1]->router_m2p->print_trace();
1234            // clusters[1][1]->router_m2p->print_trace();
1235
1236            // trace external ioc
1237            bdev->print_trace();
1238            signal_vci_tgt_bdev.print_trace("[SIG]BDEV_TGT");
1239            signal_vci_ini_bdev.print_trace("[SIG]BDEV_INI");
1240
1241            // trace external iopic
1242            iopic->print_trace();
1243            signal_vci_tgt_iopi.print_trace("[SIG]IOPI_TGT");
1244            signal_vci_ini_iopi.print_trace("[SIG]IOPI_INI");
1245
1246            // trace internal tty
1247            // clusters[0][0]->mtty->print_trace();
1248            // clusters[0][0]->signal_vci_tgt_mtty.print_trace("[SIG]MTTY");
1249
1250        }  // end trace
1251
1252        if (0)
1253        {
1254            // trace BDV interrupts events
1255            if ( signal_irq_bdev.read() != prev_irq_bdev )
1256            {
1257                prev_irq_bdev = signal_irq_bdev.read();
1258                std::cout << std::dec << "@@@ IRQ_BDEV = " << signal_irq_bdev.read()
1259                          << " at cycle " << n << std::endl;
1260            }
1261
1262            // trace TTY interrupts events
1263            for ( size_t x = 0 ; x < 8 ; x++ )
1264            {
1265                if ( signal_irq_mtty_rx[x].read() != prev_irq_mtty_rx[x] )
1266                {
1267                    prev_irq_mtty_rx[x] = signal_irq_mtty_rx[x].read();
1268                    std::cout << std::dec << "@@@ IRQ_MTTY["<<x<<"] = "
1269                              << signal_irq_mtty_rx[x].read()
1270                              << " at cycle " << n << std::endl;
1271                }
1272            }
1273
1274            // trace processor interrupts events
1275            for ( size_t x = 0 ; x < X_SIZE ; x++ )
1276            for ( size_t y = 0 ; y < Y_SIZE ; y++ )
1277            for ( size_t i = 0 ; i < NB_PROCS_MAX ; i++ )
1278            {
1279                if ( clusters[x][y]->signal_proc_irq[i] != prev_irq_proc[x][y][i] )
1280                {
1281                    prev_irq_proc[x][y][i] = clusters[x][y]->signal_proc_irq[i];
1282                    std::cout << std::dec << "@@@ IRQ_PROC["<<x<<","<<y<<","<<i<<"] = "
1283                              << clusters[x][y]->signal_proc_irq[i]
1284                              << " at cycle " << n << std::endl;
1285                }
1286            }
1287
1288            // trace VCI transactions on IOPIC and XCU(0,0)
1289            signal_vci_tgt_iopi.print_trace("@@@ IOPI_TGT");
1290            signal_vci_ini_iopi.print_trace("@@@ IOPI_INI");
1291            clusters[0][0]->signal_vci_tgt_xicu.print_trace("@@@ XCU_0_0");
1292        }
1293
1294        sc_start(sc_core::sc_time(1, SC_NS));
1295    }
1296    // Free memory
1297    for (size_t i = 0 ; i  < (X_SIZE * Y_SIZE) ; i++)
1298    {
1299        size_t x = i / (Y_SIZE);
1300        size_t y = i % (Y_SIZE);
1301        delete clusters[x][y];
1302    }
1303
1304    return EXIT_SUCCESS;
1305}
1306
1307void handler(int dummy = 0)
1308{
1309   stop_called = true;
1310   sc_stop();
1311}
1312
1313void voidhandler(int dummy = 0) {}
1314
1315int sc_main (int argc, char *argv[])
1316{
1317   signal(SIGINT, handler);
1318   signal(SIGPIPE, voidhandler);
1319
1320   try {
1321      return _main(argc, argv);
1322   } catch (std::exception &e) {
1323      std::cout << e.what() << std::endl;
1324   } catch (...) {
1325      std::cout << "Unknown exception occured" << std::endl;
1326      throw;
1327   }
1328   return 1;
1329}
1330
1331
1332// Local Variables:
1333// tab-width: 3
1334// c-basic-offset: 3
1335// c-file-offsets:((innamespace . 0)(inline-open . 0))
1336// indent-tabs-mode: nil
1337// End:
1338
1339// vim: filetype=cpp:expandtab:shiftwidth=3:tabstop=3:softtabstop=3
Note: See TracBrowser for help on using the repository browser.