This is anita version 2.1 Using pexpect version 4.7.0 /dsk/l1/misc/bouyer/anita/anita \ --test-timeout \ 3600 \ --disk-size \ 3500M \ --memory-size \ 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot-com1.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot2.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot3.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot4.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot5.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot6.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t \ cd9660 \ -o \ rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/install_tmp.iso \ /dsk/l1/misc/bouyer/tests-dir/anita/work/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/download Creating hard disk image... done. QEMU emulator version 4.0.0 Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-i386 qemu package: qemu-4.0.0nb5 glib2 package: glib2-2.60.4nb5 not reversing virtio devices qemu-system-i386 \ -m \ 256 \ -drive \ file=work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -drive \ file=work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/install_tmp.iso,format=raw,media=cdrom,readonly=on child pid is 16671 c[?7lSeaBIOS (version rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+0FF91410+0FEF1410 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-13887364\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 1, insert disk 2, and press return...QEMU 4.0.0 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block155): work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback floppy0 (#block346): work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[16] Removable device: not locked, tray closed Cache mode: writeback ide0-cd1 (#block511): work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 wchange floppy0 wochange floppy0 worchange floppy0 workchange floppy0 work-change floppy0 work-hchange floppy0 work-htchange floppy0 work-httchange floppy0 work-httpchange floppy0 work-http-change floppy0 work-http--change floppy0 work-http---change floppy0 work-http---fchange floppy0 work-http---ftchange floppy0 work-http---ftpchange floppy0 work-http---ftp. /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 2, insert disk 3, and press return...change floppy0 work-http---ftp.fchange floppy0 work-http---ftp.frchange floppy0 work-http---ftp.fr.change floppy0 work-http---ftp.fr.nchange floppy0 work-http---ftp.fr.nechange floppy0 work-http---ftp.fr.netchange floppy0 work-http---ftp.fr.netb[ -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 3, insert disk 4, and press return...Dchange floppy0 work-http---ftp.fr.netbschange floppy0 work-http---ftp.fr.netbsdchange floppy0 work-http---ftp.fr.netbsd.change floppy0 work-http---ftp.fr.netbsd.ochange floppy0 work-http---ftp.fr.netbsd.orchange floppy0 work-http---ftp.fr.netbsd.org \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 4, insert disk 5, and press return...change floppy0 work-http---ftp.fr.netbsd.org-change floppy0 work-http---ftp.fr.netbsd.org-pchange floppy0 work-http---ftp.fr.netbsd.org-puchange floppy0 work-http---ftp.fr.netbsd.org-pubchange floppy0 work-http---ftp.fr.netbsd.org-pub-change floppy0 work-http---ftp.fr.netbsd.org-pub-Nchange floppy0 work-http---ftp.fr.netbsd.org-pub-Nechange floppy0 work-http---ftp.fr.netbsd.org-pub-Netchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSchange floppy0 work-http---ftp.fr.n |/-\|/-\|/-\|/-\|/+5662616-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 5, insert disk 6, and press return...etbsd.org-pub-NetBSDchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-change floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dachange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-daichange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dailchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dailychange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-change floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-n /-\|/-\|/-\|/-\|/-\+844904=0x1373c34 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/i386/compile/INSTALL total memory = 255 MB avail memory = 231 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F5920 000014 (v00 BOCHS ) ACPI: RSDT 0x000000000FFE156F 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x000000000FFE144B 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x000000000FFE0040 00140B (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x000000000FFE0000 000040 ACPI: APIC 0x000000000FFE14BF 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x000000000FFE1537 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170303 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 2 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0 port 0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 wm0: MDIC write error: phy 1 reg 22 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 3500 MB, 7111 cyl, 16 head, 63 sec, 512 bytes/sect x 7168000 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.2/modules warning: no /dev/console Created tmpfs /dev (1687552 byte, 3264 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/i386 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Keyboard type(0x(B(0x(B(0x(B(0x(B>a: unchanged(0x(B(0x(B b: US-English(0x(B(0x(B c: UK-English(0x(B(0x(B d: Belgian(0x(B(0x(B e: Czech(0x(B(0x(B f: Danish(0x(B(0x(B g: Dutch(0x(B(0x(B h: Finnish(0x(B(0x(B i: French(0x(B(0x(B j: German(0x(B(0x(B k: Greek(0x(B(0x(B <: page up, >: page down (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B(0 (B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: wd0 (3.4G, QEMU HARDDISK)(0x(B(0x(B b: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80887 128 637168000 3  Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: This is the correct geometry(0x(B(0x(B b: Set the geometry by hand (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions.  If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD.  A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself.   (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Which would you like to do? (0x(B(0x(B(0x(B(0x(B>a: Edit the MBR partition table(0x(B(0x(B b: Use the entire disk(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode?         (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: Yes(0x(B(0x(B b: No(0x(B(0mqqqqqqqqqqqqqqqj(B NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel.  You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 3499 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 545 (3243) 1108 1116864 + / b: 256521 525168 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 2698 MB, 12 free partitions. a: 545 (3243) 1108 1116864 + / >b: 256 521 525168 swap  b: 256 521 525168 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 2698 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 3242 3243 FFSv2 Yes Yes / b: 3243 3499256 swap c:0 3499 3499 NetBSD partition d:0 3499 3500 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [QEMU HARDDISK ]:                          Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes Setting up the DOS partition table ...                            Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a --------------------------------------------------------------------------------/dev/rwd0a: 3243.5MB (6642720 sectors) block size 16384, fragment size 2048 using 18 cylinder groups of 180.20MB, 11533 blks, 22400 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baud(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B a: Use BIOS console(0x(B(0x(B>b: Use serial port com0(0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B b: Use serial port com0>x: Exit Installing boot blocks on wd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                        Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA87% |******************************16768 KiB 12.03 M00:00 ETA100*****| 192408 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA27% |*********11840 KiB 7.37 M00:04 ETA38****638403 ETA61********25856192 ETA74****31424051 ETA93******* | 39616200 ETA100***| 423706.97 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA9% |***14720 KiB 9.82 M00:14 ETA15% |*****2387210.512 ETA21**33984 9.848**4460810.180 ETA34**5484 9.9540***63808709 ETA6**73344708 ETA52**82560667 ETA8**9222436 ETA61*7792498** 105 M75 ETA70*88.937**2083 ETA81**7866**3462 ETA9*8399141161 ETA3*57.939** | 15340 ETA100*| 1545Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 6.04 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA3% |*15360 KiB 11.00 M00:43 ETA4247040.922 ETA6% |**30976 8.7053 ETA77312324 ETA843077.68 ETA5056231:01 ETA9% |***77446.49 ETA10503680413 ETA39525.756 ETA1619321 ETA9328183 ETA4% |****723207613 ETA7*867846.304 ETA9*98176740:58 ETA21* 107 MiB 7.04 ETA4*18301 ETA523147028*402748 ETA30*8366 ETA52227 ETA150476.779 ETA2*606350 ETA292 ETA213 ETA35.935 ETA4846 ETA6*776.01 ETA8*882048 ETA99567 ETA40*916 ETA120217 ETA45.996868 ETA21025*24994 ETA7*336.02 ETA9*4210 ETA5152838 ETA2*867 ETA466335 ETA5*734 ETA66258167800825.998*539913 ETA62*3056.060 ETA4*11528 ETA523207 ETA6*6146 ETA7057 ETA73346 ETA70*4494 ETA150123 ETA2*632 ETA361091 ETA4466*71119 ETA8*87226 ETA81*98304 ETA240413 ETA3*82710145182 ETA6*26230 ETA9*383208 ETA91486 ETA2*5375 ETA6239276114 ETA441209progress: writing 65536 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(BThis is anita version 2.1 Using pexpect version 4.7.0 /dsk/l1/misc/bouyer/anita/anita \ --test-timeout \ 80000 \ --disk-size \ 3500M \ --memory-size \ 256M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211091620Z/i386/ /usr/sbin/makefs \ -t \ cd9660 \ -o \ rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/install_tmp.iso \ /dsk/l1/misc/bouyer/tests-dir/anita/work/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/download Creating hard disk image... done. QEMU emulator version 4.0.0 Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-i386 qemu package: qemu-4.0.0nb5 glib2 package: glib2-2.60.4nb5 not reversing virtio devices qemu-system-i386 \ -m \ 256 \ -drive \ file=work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -drive \ file=work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/install_tmp.iso,format=raw,media=cdrom,readonly=on child pid is 16481 c[?7lSeaBIOS (version rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+0FF91410+0FEF1410 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-13887364\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 1, insert disk 2, and press return...QEMU 4.0.0 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block195): work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback floppy0 (#block304): work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[16] Removable device: not locked, tray closed Cache mode: writeback ide0-cd1 (#block577): work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211091620Z-i386-+a4c35c48/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 wchange floppy0 wochange floppy0 worchange floppy0 workchange floppy0 work-change floppy0 work-hchange floppy0 work-ht /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 2, insert disk 3, and press return...change floppy0 work-httchange floppy0 work-httpchange floppy0 work-http-change floppy0 work-http--change floppy0 work-http---change floppy0 work-http---fchange floppy0 work-http---ftchange floppy0 work-http---ftpchange floppy0 work-http---ftp.change floppy0 work-http---ftp.fchange floppy0 work-http---ftp.frchange floppy0 work-http---ftp.fr.change floppy0 work-http---ftp.fr.nchange floppy0 work-http---ftp.fr.nechange floppy0 work-http---ftp.fr.netchange floppy0 work-http---ftp.fr.netb -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 3, insert disk 4, and press return...change floppy0 work-http---ftp.fr.netbschange floppy0 work-http---ftp.fr.netbsdchange floppy0 work-http---ftp.fr.netbsd.change floppy0 work-http---ftp.fr.netbsd.ochange floppy0 work-http---ftp.fr.netbsd.orchange floppy0 work-http---ftp.fr.netbsd.orgchan \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 4, insert disk 5, and press return...ge floppy0 work-http---ftp.fr.netbsd.org-change floppy0 work-http---ftp.fr.netbsd.org-pchange floppy0 work-http---ftp.fr.netbsd.org-puchange floppy0 work-http---ftp.fr.netbsd.org-pubchange floppy0 work-http---ftp.fr.netbsd.org-pub-change floppy0 work-http---ftp.fr.netbsd.org-pub-Nchange floppy0 work-http---ftp.fr.netbsd.org-pub-Nechange floppy0 work-http---ftp.fr.netbsd.org-pub-Netchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSchange floppy0 work-http---ftp.fr.netbsd.o |/-\|/-\|/-\|/-\|/+5662616-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 5, insert disk 6, and press return...rg-pub-NetBSDchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-change floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dachange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-daichange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dailchange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-dailychange floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-change floppy0 work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-n[ /-\|/-\|/-\|/-\|/-\+844904=0x1373c34 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/i386/compile/INSTALL total memory = 255 MB avail memory = 231 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F5920 000014 (v00 BOCHS ) ACPI: RSDT 0x000000000FFE156F 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x000000000FFE144B 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x000000000FFE0040 00140B (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x000000000FFE0000 000040 ACPI: APIC 0x000000000FFE14BF 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x000000000FFE1537 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170303 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 2 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0 port 0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 wm0: MDIC write error: phy 1 reg 22 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 3500 MB, 7111 cyl, 16 head, 63 sec, 512 bytes/sect x 7168000 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.2/modules warning: no /dev/console Created tmpfs /dev (1687552 byte, 3264 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/i386 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Keyboard type(0x(B(0x(B(0x(B(0x(B>a: unchanged(0x(B(0x(B b: US-English(0x(B(0x(B c: UK-English(0x(B(0x(B d: Belgian(0x(B(0x(B e: Czech(0x(B(0x(B f: Danish(0x(B(0x(B g: Dutch(0x(B(0x(B h: Finnish(0x(B(0x(B i: French(0x(B(0x(B j: German(0x(B(0x(B k: Greek(0x(B(0x(B <: page up, >: page down (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B(0 (B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: wd0 (3.4G, QEMU HARDDISK)(0x(B(0x(B b: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80887 128 637168000 3  Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: This is the correct geometry(0x(B(0x(B b: Set the geometry by hand (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions.  If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD.  A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself.   (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Which would you like to do? (0x(B(0x(B(0x(B(0x(B>a: Edit the MBR partition table(0x(B(0x(B b: Use the entire disk(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode?         (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: Yes(0x(B(0x(B b: No(0x(B(0mqqqqqqqqqqqqqqqj(B NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel.  You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 3499 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 545 (3243) 1108 1116864 + / b: 256521 525168 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 2698 MB, 12 free partitions. a: 545 (3243) 1108 1116864 + / >b: 256 521 525168 swap  b: 256 521 525168 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 2698 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 3242 3243 FFSv2 Yes Yes / b: 3243 3499256 swap c:0 3499 3499 NetBSD partition d:0 3499 3500 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [QEMU HARDDISK ]:                          Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes Setting up the DOS partition table ...                            Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a --------------------------------------------------------------------------------/dev/rwd0a: 3243.5MB (6642720 sectors) block size 16384, fragment size 2048 using 18 cylinder groups of 180.20MB, 11533 blks, 22400 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baud(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B a: Use BIOS console(0x(B(0x(B>b: Use serial port com0(0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B b: Use serial port com0>x: Exit Installing boot blocks on wd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                        Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA91% |******************************* | 17600 KiB 12.11 M00:00 ETA100****| 192409 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA27% |*********11648 KiB 7.62 M00:03 ETA39****6761461********2592042 ETA78******3315221 ETA95****** | 4044850 ETA100**| 4237020 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA8% |**13952 KiB 9.76 M00:14 ETA15% |*****2412810.52 ETA21**34496 9.927**4435210.240 ETA34**552960240***64320 9.9709 ETA6**74496818 ETA52**83904747 ETA8**9241606 ETA63** 98 M595 ETA8.886 ETA6*103473**14564 ETA9**22603 ETA84**30482 ETA8*73490*9061 ETA3*447.824669** | 15440 ETA100*38 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 5.88 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA213824 KiB 11.06 M00:43 ETA5% |*258560.806% |**33024 9.438 ETA79108.6252 ETA8440967.896 ETA8 progress: writing 65536 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B