Fri Oct 7 23:32:25 MEST 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/binary/kernel/netbsd-GENERIC.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-20920"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/download/amd64/binary/kernel/netbsd-INSTALL.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 683 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.100 (INSTALL) #0: Wed Oct 5 12:09:07 UTC 2022 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/INSTALL [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 220 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F70 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D70 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001050 006C9B (v05 Xen HVM 00000000 INTL 20190405) [ 1.0000000] ACPI: FACS 0x00000000FC001010 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E80 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu1: node 0, package 0, core 2, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.13.2nb0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20220331 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000030] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0102584] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0402519] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0402519] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0402519] xbd0: backend features 0x1 [ 1.0602599] balloon at xenbus0 id 0 not configured [ 1.0702507] xbd1: 429 MB, 512 bytes/sect x 878592 sectors [ 1.0702507] xbd1: backend features 0x1 [ 1.0702507] swwdog0: software watchdog initialized [ 1.0702507] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.1002540] WARNING: 2 errors while detecting hardware; check system log. [ 1.1002540] boot device: xbd0 [ 1.1002540] root on md0a dumps on md0b [ 1.1002540] root file system type: ffs [ 1.1102966] kern.module.path=/stand/amd64/9.99.100/modules Created tmpfs /dev (1835008 byte, 3552 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        [?7l [?7h NetBSD/amd64 9.99.100 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch (0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-9.99.100 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (429M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1925120 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1744829 sec.  a: 1925120 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1744829 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2 IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 26.7703227] dk0 at xbd0: "e60c30a4-a610-4c72-a615-dc1791a2aa2c", 524288 blocks at 3669952, type: swap [ 26.7703227] dk1 at xbd0: "632ca237-177e-403d-9ead-b596865b9d2c", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2 /dev/rdk1 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk1: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk1 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ------------------------ --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Configuration files (/etc) Yes f: Compiler tools No g: Games No h: Graphics driver firmware Yes i: Manual pages No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >f: Compiler tools No x: Install selected setsYes  f: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes   No   Yes  Yes  Yes  tools No   None   sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes  No   Yes  Yes  Ye tools No   None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device  b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files.  election & retry    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA34% |***********10027 KiB 9.76 M00:01 ETA73**************211086.8481***335.670 ETA100*******| 2876099 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA26% |*********8303 KiB 8.09 M00:02 ETA33**108185.253 ETA40***28704.14 ETA8**54333.7472*********231184.501 ETA100**********| 319205.170 ETA6 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA3% |*7424 KiB 7.21 M00:28 ETA11% |***247488.03 ETA7% |*****379529.2019 ETA22**48858497 ETA6**569002178088.039 ETA8614747.4820 ETA6.652 ETA5.985 ETA448 ETA22020530 ETA31*7866828 ETA3*7255255*71417 ETA9*86787294 ETA43**9398332 ETA5919971 ETA6* 99 M209*10560 ETA6041 ETA4.822 ETA613 ETA44 ETA245 ETA086 ETA5073.974*154.123 ETA8**24280 ETA97463**343218 ETA5246*42316 ETA84255 ETA70*50304 ETA2*53 ETA37245*6022 ETA118*661 ETA81*742509 ETA3*728 ETA8*8355 ETA8289191029*3.9486909243*9913 ETA4200857706457145- stalled -393283172083 00:04 ETA9** | 211150 ETA100*| 2123 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4230 KiB 4.37 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA2345 KiB 2.27 M03:59 ETA3% |*205836.661:19 ETA4723228 ETA6% |**363767.082 ETA87116.221 ETA7414895.777 ETA86668688 ETA9% |***5221657 ETA107278588 ETA604803631 ETA2% |****86915826 ETA372926477 ETA39121432 ETA274.808 ETA545 ETA2452 ETA008 ETA3.792:05 ETA60- stalled -644955 02:13 ETA5*856217902 ETA693749971:54 ETA7723455799 ETA83652:03 ETA 98 M38*9565 ETA100459 ETA9654 ETA747 ETA3411 ETA25 ETA120 ETA054 ETA2.978 ETA89- stalled -1746705448337227218309511.9821*162.11 03:23 ETA3*22507 ETA433332:57 ETA6*465238 ETA854610 ETA9*8426 ETA615 ETA308700 ETA9681 ETA42 ETA17014 ETA576 ETA38 ETA031 ETA463 ETA25 ETA39- stalled -6229630175209742*711 02:55 ETA384647 ETA4893 ETA5*91201 ETA7203329 ETA8*844 ETA25 ETA9297 ETA78 ETA59 ETA10430 ETA11 ETA193 ETA75 ETA95200 ETA42*323414 ETA552 ETA3*71 ETA442708 ETA58413 ETA512 ETA6*31 ETA76051:57 ETA26 ETA9*882 ETA7190 ETA3851 ETA32 ETA13 ETA394 ETA75 ETA56 ETA518091 ETA282*74147 ETA4980 ETA5*3025038 ETA6834 ETA1023 ETA8*9728 ETA2387 ETA60*9613 ETA3321 ETA02 ETA583 ETA644 ETA2- stalled -015 01:24 ETA24340 ETA4*556113 ETA572 ETA906*611 ETA77208 ETA97 ETA8726 ETA9*953 ETA718700:58 ETA6869 ETA531:00 ETA159- stalled -2*9763 00:56 ETA34005 ETA4553 ETA742 ETA6*18948 ETA8*31762 ETA9351 ETA660 ETA80*939 ETA148805 ETA25313 ETA79864 ETA43*63 ETA6*718226 ETA88790 ETA9*919019 ETA289890368 ETA5150176 ETA2*9903 ETA41521 ETA189769709 ETA6*2796 ETA736924 ETA8* | 54032 ETA931 ETA100*| 54740 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA1740816.9245:50 ETA 5.632:17:35 ETA4.23:03:14 ETA3.3848:53 ETA2.82- stalled -18% |****** 8518 KiB 1.18 MiB/s 00:31 ETA50***********236002.8707 ETA71*******331233.583 ETA9***7164622 ETA91**** | 4269781 ETA100****| 46580900 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA68% |***********************9950 KiB 9.63 M00:00 ETA100************| 14498.01 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA84% |*****************************7831 KiB 7.60 M00:00 ETA100******| 92705.92 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA1904 KiB 894.8401:05 ETA19 KiB 454.902:09 ETA15% |*****9324 KiB 3.01 M0:16 ETA26****16017881 ETA33**202499309 ETA9**35278140*41163510 ETA3*58681461362.821 ETA4841612 ETA8*8860551 ETA51*30726498***5136309 ETA277452910 ETA151 ETA0261*67881.997***425162.1807 ETA4*443866 ETA5107 ETA5*9001.996553238*726626 ETA85**513042.004 ETA8*28701.983 ETA91*464272 ETA8*** | 586832.040 ETA961.97084798434100*| 598405 Finished   (0 (B(0 (B                     All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B               Finished   (0 (B(0 (B                     The extraction of the selected sets for NetBSD-9.99.100 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B        The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters. **********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************     Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-9.99.100 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 421.7418406] dk1 at xbd0 (632ca237-177e-403d-9ead-b596865b9d2c) deleted [ 421.9018237] dk1: detached NetBSD/amd64 9.99.100 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-9.99.100 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-20920 Fri Oct 7 23:42:11 MEST 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202210051600Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-21415"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/download/amd64/binary/kernel/netbsd-GENERIC.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202210051600Z-amd64-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 19350 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.100 (GENERIC) #0: Wed Oct 5 12:09:07 UTC 2022 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 468 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F70 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D70 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001050 006C9B (v05 Xen HVM 00000000 INTL 20190405) [ 1.0000000] ACPI: FACS 0x00000000FC001010 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E80 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu1: node 0, package 0, core 2, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.13.2nb0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20220331 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000040] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0102615] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0302292] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0402360] balloon at xenbus0 id 0 not configured [ 1.0402360] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0402360] xbd0: backend features 0x1 [ 1.3102366] dk0 at xbd0: "632ca237-177e-403d-9ead-b596865b9d2c", 3669888 blocks at 64, type: ffs [ 1.3102366] dk1 at xbd0: "e60c30a4-a610-4c72-a615-dc1791a2aa2c", 524288 blocks at 3669952, type: swap [ 1.3102366] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 1.3202374] xbd1: backend features 0x1 [ 1.3202374] swwdog0: software watchdog initialized [ 1.3202374] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.3202374] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.9302342] WARNING: 3 errors while detecting hardware; check system log. [ 1.9302342] boot device: dk0 [ 1.9302342] root on dk0 dumps on dk1 [ 3.3702340] root file system type: ffs [ 3.4302362] kern.module.path=/stand/amd64/9.99.100/modules Fri Oct 7 21:43:48 UTC 2022 Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 80.4902311] entropy: ready Loaded entropy from /var/db/entropy-file. Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. Oct 7 21:44:21 postfix[2663]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Fri Oct 7 21:44:23 UTC 2022 Oct 7 21:44:23 getty[321]: /dev/ttyE2: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: Oct 7 21:44:23 getty[322]: /dev/ttyE3: Device not configured Oct 7 21:44:23 getty[320]: /dev/ttyE1: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: root Oct 7 21:44:24 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.100 (GENERIC) #0: Wed Oct 5 12:09:07 UTC 2022 Welcome to NetBSD! This is a development snapshot of NetBSD for testing -- user beware! Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-pr''ompt-1665179065.13# ' anita-root-shell-prompt-1665179065.13# df -k | sed 's/^/df-pre-test /'; mkdir /t mp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee  /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt -o x ml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xs l /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css ; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` - lt 90000 && test `