Wed May 24 11:55:33 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/kern-GENERIC.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/kern-GENERIC.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/modules.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/modules.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/base.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/base.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/etc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/etc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/comp.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/comp.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/gpufw.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/misc.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/misc.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/rescue.tar.xz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/tests.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/sets/tests.tar.xz... OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/binary/kernel/netbsd-GENERIC.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-26210"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/download/amd64/binary/kernel/netbsd-INSTALL.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 2338 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.4 (INSTALL) #0: Tue May 23 00:31:42 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/INSTALL [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 220 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F70 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D70 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001050 006C9B (v05 Xen HVM 00000000 INTL 20190405) [ 1.0000000] ACPI: FACS 0x00000000FC001010 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E80 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu1: node 0, package 0, core 2, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.13.2nb0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20221020 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000030] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0109511] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0403628] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0403628] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0403628] xbd0: backend features 0x1 [ 1.0605955] balloon at xenbus0 id 0 not configured [ 1.0702904] xbd1: 465 MB, 512 bytes/sect x 952320 sectors [ 1.0702904] xbd1: backend features 0x1 [ 1.0702904] swwdog0: software watchdog initialized [ 1.0702904] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.1002818] WARNING: 2 errors while detecting hardware; check system log. [ 1.1002818] boot device: xbd0 [ 1.1002818] root on md0a dumps on md0b [ 1.1002818] root file system type: ffs [ 1.1002818] kern.module.path=/stand/amd64/10.99.4/modules Created tmpfs /dev (1835008 byte, 3552 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                [?7l [?7h NetBSD/amd64 10.99.4 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch (0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.4 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (465M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 127M without X and at least 427M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1925120 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1744829 sec.  a: 1925120 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1744829 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2ea IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 29.7403532] dk0 at xbd0: "c84d5a0c-fb34-4e55-8151-27c64f864825", 524288 blocks at 3669952, type: swap [ 29.7403532] dk1 at xbd0: "aa234a05-90f5-4650-85a4-8995e834d3f6", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk1 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk1: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048 using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk1 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ------------------------ --------   a: Kernel (GENERIC) Yes b: Kernel (GENERIC_KASLR) No c: Kernel modules Yes d: Base Yes e: Configuration files (/etc) Yes f: Compiler tools No g: Games No h: Graphics driver firmware Yes i: Manual pages No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >f: Compiler tools No x: Install selected setsYes  f: Compiler tools Yes >j: Miscellaneous No Yes  j: Miscellaneous Yes >k: Recovery tools No Yes  k: Recovery tools Yes >l: Test programs No Yes  l: Test programs Yes >n: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes   No   Yes  Yes  Yes  tools No   None   sets None  n: X11 sets None >o: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Yes  No  firmware Yes  No   Yes  Yes  Ye tools No   None   sets None   sets    o: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tar.xz files.  >a: Device  b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: File extension .tar.xz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tar.xz files.  election & retry    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set /source/sets d: File extension.tar.xz a: Device xbd1d >x: Continue [ 33.9405330] RRIP without PX field?    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA28% |*********8286 KiB 8.03 M00:02 ETA86*********************2486550 ETA100*****| 2884018 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA6% |**2008 KiB 1.94 M00:15 ETA30% |**********9624.6604 ETA54********174235.632 ETA79*********255866.211 ETA100********| 32030550 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA14700 KiB 4.55 M00:52 ETA3% |*79743.871:01 ETA6% |**152184.940:46 ETA82050694 ETA9% |***26794250 ETA1188706946 ETA4% |****3546942 ETA8**45485.536 ETA21*53255773 ETA27024563*81156 ETA4.729 ETA3642 ETA056 ETA3.789 ETA462550818 ETA55024737*984686 ETA31*79534.00 ETA3*845071239 ETA5*959667 ETA79448396 ETA9*9252215 ETA41* 101 M33 ETA24184*9202 ETA053 ETA3.904 ETA775 ETA647 ETA510556*339*20663 ETA51582 ETA4*338228 ETA6*837 ETA8*416 ETA37660*75 ETA823*5473 ETA560802 ETA72633 ETA7*681 ETA70*727419 ETA2*767 ETA482816 ETA6*605 ETA8754 ETA8*91480*672 ETA12001 ETA3*360 ETA6*108308 ETA76699 ETA39*797 ETA92*25755 ETA431803 ETA737*871 ETA9* | 244810 ETA750100*64 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4540 KiB 5.67 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA17852 KiB 7.62 M01:10 ETA104185.0446 ETA3% |*84159628 ETA4235047131 ETA5316166.1523 ETA6% |**68095.975 ETA8638334 ETA7423157 ETA88962303 ETA4.7744 ETA3354 ETA3.972:05 ETA615 ETA41- stalled -189% |***518095 02:36 ETA105924202 ETA1623163723 ETA2% |****86785215 ETA724334 ETA3934389 ETA7712446 ETA5*8595606 ETA693276791:59 ETA7 98 M914 ETA9*1064.0747 ETA3.9251 ETA786 ETA652:00 ETA20*91:59 ETA115715 ETA2238549 ETA4*324.012 ETA59939 ETA6*45146 ETA75094 ETA86212 ETA9*8163 ETA3064200 ETA5131 ETA04 ETA3.946 ETA1724.003 ETA2*63.992 ETA733 ETA38251 ETA484.0128 ETA5*9327 ETA3.949 ETA8630 ETA531 ETA72069725 ETA8*83867 ETA798 ETA230 ETA652 ETA593 ETA3- stalled -479139 01:34 ETA40*21570 ETA2306526 ETA3*6703 ETA545719 ETA6*51817 ETA406 ETA76134 ETA9*881 ETA32 ETA97943 ETA694 ETA45 ETA596 ETA47 ETA08 ETA45- stalled -724 01:19 ETA52*8353 ETA39081 ETA456009 ETA5*30465 ETA6874 ETA71492 ETA8*20720 ETA681 ETA15950 ETA1571 ETA32 ETA046- stalled -60*307 01:01 ETA24540:57 ETA4*5614 ETA5861 ETA6*65848 ETA7778717 ETA9*8714 ETA71861 ETA2*9270 ETA38938 ETA629 ETA69540 ETA240239 ETA4747 ETA5*1036874 ETA8*26702 ETA934429 ETA80*4177 ETA1785 ETA2503*7813 ETA46002 ETA7741683 ETA52- stalled -564 00:21 ETA7*7918 ETA9*85736 ETA919682 ETA2*505820 ETA3909 ETA41338 ETA527 ETA6795*88624805 ETA774734 ETA8* | 53462 ETA971 ETA9430 ETA100*| 5458 Finished   (0 (B(0 (B                    [ 261.2034626] RRIP without PX field?    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/gpufw.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA20% |*******9659 KiB 9.38 M00:03 ETA66****************311810.091 ETA83******8970 9.470 ETA495487.70806.421 ETA5.504.82283.855021- stalled -2.9693*** | 433813.02 00:01 ETA100***| 46580140 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/misc.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA32% |***********4709 KiB 4.58 M00:02 ETA100************************| 146505.10 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/rescue.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA66% |***********************6376 KiB 6.22 M00:00 ETA100************| 964018 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/tests.tar.xz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA4% |*3383 KiB 3.27 M00:23 ETA9% |***7817719 ETA15% |*****128564.156 ETA21**7864334 ETA9***24609781 ETA38***314805.1109 ETA42*53284.9763010 ETA3*5283.841 ETA864493 ETA6091204 ETA7*94243 ETA51*427332 ETA6**686860 ETA61**50687909 ETA94410592.9210 ETA761 ETA619***70657808 ETA76**6351956 ETA80**611135 ETA98023969603017216526**7120174 ETA91*5515632 ETA5** | 7905961 ETA9* | 820340 ETA100*| 82570 Finished   (0 (B(0 (B                     All selected distribution sets unpacked successfully.    Making device nodes ...    (0 (B(0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B               Finished   (0 (B(0 (B                     The extraction of the selected sets for NetBSD-10.99.4 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B        The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root.(0 (BNew password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line *********************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************     Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.     a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.99.4 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                   [ 369.5146030] dk1 at xbd0 (aa234a05-90f5-4650-85a4-8995e834d3f6) deleted  [ 369.6605417] dk1: detached NetBSD/amd64 10.99.4 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.4 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-26210 Wed May 24 12:04:04 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pvh \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/amd64/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-23625"' \ 'kernel="/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/download/amd64/binary/kernel/netbsd-GENERIC.gz"' \ 'type="pvh"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pvh/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-amd64-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 29754 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.4 (GENERIC) #0: Tue May 23 00:31:42 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 468 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen ) [ 1.0000000] ACPI: XSDT 0x00000000FC007F70 000034 (v01 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: FACP 0x00000000FC007D70 00010C (v05 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: DSDT 0x00000000FC001050 006C9B (v05 Xen HVM 00000000 INTL 20190405) [ 1.0000000] ACPI: FACS 0x00000000FC001010 000040 [ 1.0000000] ACPI: APIC 0x00000000FC007E80 00003C (v02 Xen HVM 00000000 HVML 00000000) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] cpu0 at mainbus0 apid 0 [ 1.0000000] cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] cpu1 at mainbus0 apid 2 [ 1.0000000] cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] cpu1: node 0, package 0, core 2, smt 0 [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.13.2nb0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] acpi0 at mainbus0: Intel ACPICA 20221020 [ 1.0000000] ACPI: Enabled 1 GPEs in block 00 to 0F [ 1.0000000] isa0 at mainbus0 [ 1.0000000] acpicpu0 at cpu0: ACPI CPU [ 1.0000000] acpicpu1 at cpu1: ACPI CPU [ 1.0000040] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0118587] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0303332] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0303332] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0303332] xbd0: backend features 0x1 [ 1.0503152] balloon at xenbus0 id 0 not configured [ 1.0703391] dk0 at xbd0: "aa234a05-90f5-4650-85a4-8995e834d3f6", 3669888 blocks at 64, type: ffs [ 1.0703391] dk1 at xbd0: "c84d5a0c-fb34-4e55-8151-27c64f864825", 524288 blocks at 3669952, type: swap [ 1.0703391] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 1.0703391] xbd1: backend features 0x1 [ 1.0703391] swwdog0: software watchdog initialized [ 1.0703391] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0803035] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0903231] WARNING: 3 errors while detecting hardware; check system log. [ 1.0903231] boot device: dk0 [ 1.0903231] root on dk0 dumps on dk1 [ 1.1003276] root file system type: ffs [ 1.1003276] kern.module.path=/stand/amd64/10.99.4/modules Wed May 24 10:04:14 UTC 2023 Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 3.6803120] entropy: ready Loaded entropy from /var/db/entropy-file. Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. May 24 10:04:25 postfix[2407]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Wed May 24 10:04:27 UTC 2023 May 24 10:04:27 getty[321]: /dev/ttyE2: Device not configured May 24 10:04:27 getty[322]: /dev/ttyE3: Device not configured May 24 10:04:27 getty[320]: /dev/ttyE1: Device not configured NetBSD/amd64 (Amnesiac) (constty) login: NetBSD/amd64 (Amnesiac) (constty) login: root May 24 10:04:28 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.4 (GENERIC) #0: Tue May 23 00:31:42 UTC 2023 Welcome to NetBSD! This is a development snapshot of NetBSD for testing -- user beware! Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-pr''ompt-1684922669.48# ' anita-root-shell-prompt-1684922669.48# df -k | sed 's/^/df-pre-test /'; mkdir /t mp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee  /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt -o x ml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xs l /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css ; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` - lt 90000 && test ` xl \ destroy \ anita-23625 Wed May 24 13:40:10 MEST 2023