Wed May 24 13:31:32 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot-com1.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot2.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot3.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot4.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot5.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot6.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/floppy/boot7.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/gpufw.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/rescue.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/kernel/netbsd-XEN3PAE_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-9518"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/download/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/install_tmp.iso,xvdb,r'"'"']' child pid is 29124 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.4 (INSTALL_XEN3PAE_DOMU) #0: Tue May 23 00:31:42 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3PAE_DOMU [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 237 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.13.2nb0 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0200811] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0300738] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0501581] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0501581] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0501581] xbd0: backend features 0x1 [ 1.0716551] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.0716551] balloon0: current reservation: 262144 KiB [ 1.0716551] xbd1: 553 MB, 512 bytes/sect x 1132544 sectors [ 1.0716551] xbd1: backend features 0x1 [ 1.0803127] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0803127] balloon0: current reservation: 65536 pages => target: 65536 pages [ 1.1101304] WARNING: 2 errors while detecting hardware; check system log. [ 1.1101304] boot device: xbd0 [ 1.1101304] root on md0a dumps on md0b [ 1.1101304] root file system type: ffs [ 1.1101304] kern.module.path=/stand/i386/10.99.4/modules Created tmpfs /dev (1867776 byte, 3616 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                [?7l [?7h NetBSD/i386 10.99.4 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English (0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch (0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B           Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.4 Install System (0x(B(0x(B (0x(B(0x(B>a: Install NetBSD to hard disk (0x(B(0x(B b: Upgrade NetBSD on a hard disk (0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer (0x(B(0x(B e: Utility menu (0x(B(0x(B f: Config menu (0x(B(0x(B x: Exit Install System (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?                   (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                         [?7l [?7h On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks (0x(B(0x(B (0x(B(0x(B>a: xbd0 (2.0G) (0x(B(0x(B b: xbd1 (553M) (0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          [?7l [?7h(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B (0x(B The disk seems not to have been partitioned before. Please select (0x(B (0x(B a partitioning scheme from the available options below. (0x(B (0x(B (0x(B (0x(B>a: Guid Partition Table (GPT) (0x(B (0x(B b: disklabel (NetBSD only) (0x(B (0x(B x: Exit (0x(B (0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents.       You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (xbd0) is 2048M. A full installation requires at least 89M without X and at least 339M if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B What would you like to do? (0x(B(0x(B (0x(B(0x(B>a: Set sizes of NetBSD partitions (0x(B(0x(B b: Use default partition sizes (0x(B(0x(B c: Manually define partitions (0x(B(0x(B d: Delete everything, use different partitions (not GPT) (0x(B(0x(B x: Cancel (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                         [?7l [?7h You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'.  Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1744896 (3669949) + / b: 524288 c: 0 MB /tmp (tmpfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1925053 sec.  a: 1744896 (3669949) + / >b: 524288  b: 524288 >c: 0 MB /tmp (tmpfs)  c: 0 MB /tmp (tmpfs) >d: 0 /usr  d: 0 /usr >e: 0 /var  e: 0 /var >g: Add a user defined partition  g: Add a user defined partition >h: Clone external partition(s)  h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB)  i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1925053 sec.  We now have your GPT partitions for xbd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs, (B)ootable. Total size: 2048M, free: 31K             Start (sec) End (sec) Size (sec) FS type Flag Filesystem  ------------ ------------ ------------ -------- ---- ----------------  a: 64 3669951 3669888 FFSv2ea IN /  b: 3669952 4194239 524288 swap  ------------ ------------ ------------ -------- ---- ----------------  d: Change input units (sectors/cylinders/MB/GB)  e: Clone external partition(s)  f: Cancel >x: Partition sizes ok                            [?7l [?7h Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B Yes or no? (0x(B(0x(B (0x(B(0x(B>a: No (0x(B(0x(B b: Yes (0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes[ 10.0702804] dk0 at xbd0: "b96a1d1e-92a6-411e-8209-5e066cdd9f7e", 3669888 blocks at 64, type: ffs                          [?7l [?7hStatus: RunningCommand: /sbin/newfs -V2 -O 2ea /dev/rdk0 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                     /dev/rdk0: 1791.9MB (3669888 sectors) block size 16384, fragment size 2048 using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished   (0 (B                      Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B (0x(B(0x(B>a: Use BIOS console (0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Continue Installing boot blocks on xbd0....                    (0 (B                     Status: RunningCommand: /usr/sbin/installboot -f -o console=pc,speed=9600 /dev/rdk0 /usr/mdec/bootxx_ffsv2 (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    Finished   (0 (B(0 (B                     The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B (0x(B(0x(B>a: Full installation (0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationD following is the list of distribution sets that will be used.  (0 (B (0 (B           Distribution setSelected  ------------------------ --------   a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Miscellaneous No j: Recovery tools No k: Test programs No l: Text processing tools No m: X11 sets None n: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >i: Miscellaneous No Yes  i: Miscellaneous Yes >j: Recovery tools No Yes  j: Recovery tools Yes >k: Test programs No Yes  k: Test programs Yes >m: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clients No (0x(B(0x(B b: X11 programming No (0x(B(0x(B c: X11 configuration No (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 servers No (0x(B(0x(B f: Select all the above sets (0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes   No   Yes   Yes  Yes tools No   None   sets None   sets  m: X11 sets None >n: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sources No (0x(B(0x(B b: Base sources No (0x(B(0x(B c: Share sources No (0x(B(0x(B d: GNU sources No (0x(B(0x(B e: X11 sources No (0x(B(0x(B f: Debug symbols No (0x(B(0x(B g: X11 debug symbols No (0x(B(0x(B h: Select all the above sets (0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No firmware Yes   No  Y  Yes  Yes tools No   None   sets None   sets      n: Source and debug sets None >x: Install selected sets    (0 (B(0 (B                     Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines.  Sets selected 9, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from (0x(B(0x(B (0x(B(0x(B>a: CD-ROM / DVD / install image media (0x(B(0x(B b: HTTP (0x(B(0x(B c: FTP (0x(B(0x(B d: NFS (0x(B(0x(B e: Floppy (0x(B(0x(B f: Unmounted fs (0x(B(0x(B g: Local directory (0x(B(0x(B h: Skip set (0x(B(0x(B i: Skip set group (0x(B(0x(B j: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B Could not locate a CD medium in any drive with the distribution sets! Enter the correct data manually, or insert a disk and retry.                           Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device  b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: File extension .tgz e: Cancel installation f: Back to source selection & retry x: Continue (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice : xbd1dEnter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, theshould contain the .tgz files.  election & retry    a: Device xbd1d b: Binary set directory /i386/binary/sets c: Source set /source/sets d: File extension.tgz a: Device xbd1d >x: Continue    (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA61% |*********************15360 KiB 14.97 M00:00 ETA90********** | 225920.9610****| 250803 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA9% |***2240 KiB 2.17 M00:09 ETA27% |*********62083.025 ETA33**76162.466 ETA8**889164*********14912902 ETA7***7024769******* | 217603.020 ETA100***| 22957 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA1856 KiB 1.79 M01:48 ETA5% |*113925.530:33 ETA13% |****276488.9618 ETA34*******7008017.007 ETA53******* 105 MiB 21.044 ETA17.55 ETA5.06 ETA3.16471.957 ETA6*1006730.3164***27596 ETA 9.787 ETA58178.566*9108 ETA307.6871296.929 ETA583320410 ETA855.869*770708523140201032*4.871 ETA337560 ETA531 ETA87*****715.2004 ETA91*963 ETA124.98853*8202 ETA683547345021125*7076931 ETA79208*33.940 ETA950100*| 19684 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA63% |**********************2880 KiB 2.79 M00:00 ETA100*************| 4543.78 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA12% |****49792 KiB 48.36 M00:07 ETA5*6105629.5811 ETA793122.444 ETA8*7276817.698 ETA5644.7521 ETA65442.425 ETA992961.08 ETA8057 9.8132 ETA20*147285 ETA2944088 ETA159527.6240 ETA8** 114 MiB 9.5029 ETA9*58.8531 ETA6293 ETA77.825 ETA308417 ETA6.989 ETA96341 ETA20352 ETA1084 ETA135.895 ETA567 ETA2*7518 ETA93940***56.3636 ETA163274097 ETA265.928 ETA7769 ETA9643*715240 ETA4345311 ETA58246*830 ETA75159*942438 ETA50817 ETA120326 ETA6**24590 ETA7546381 ETA808*9223114205934.972 ETA58960*73751421 ETA8**705.2023 ETA1129*305507064.937864 ETA913 ETA734 ETA181693 ETA2*55492631 ETA80***3179515 ETA8891204179354 ETA269543*718563024303 ETA6*4041 ETA92**647806 ETA5*78903 ETA681892 ETA7358*631 ETA90991770 ETA100*| 3949 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/gpufw.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA6553664.0112:06 ETA91% |******************************* | 42624 KiB 20.81 M00:00 ETA5** | 4448014.48100**| 4652.44 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xpf - (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B                   0% || 00.00 KiB/s --:-- ETA26% |*********3904 KiB 3.77 M00:02 ETA40*****58882.843 ETA52****7680482 ETA96*************** | 141443.430 ETA100**| 146507 Finished   (0 (B (0 (B                       (0 (B (0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/rescue.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B                    0% || 00.00 KiB/s --:-- ETA100% |***********************************| 9040 KiB 51.93 M00:00 Finished   (0 (B(0 (B                       (0 (B(0 (B                    Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xpf -(0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B (0 (B                    0% | | 0 0.00 KiB/s --:-- ETA16% |*****13568 KiB 13.20 M00:05 ETA31*****253442.284 ETA4*7776 8.965 ETA5*93127.137 ETA73096.028 ETA40**26405.299 ETA135364.6610 ETA24560214*59043.881 ETA6608562 ETA23243 ETA6*820810893602.959*40704834 ETA511856723*3328645*4800573 ETA544464 ETA764643870*****572807908 ETA8***64128975 ETA80*5344898**718723.043 ETA90*36002.992 ETA318710****| 814503.110 Finished   (0 (B (0 (B                     All selected distribution sets unpacked successfully.   Making device nodes ...    (0 (B (0 (B                    Status: RunningCommand: /bin/sh MAKEDEV all (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                     The extraction of the selected sets for NetBSD-10.99.4 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B       The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root. New password: Password unchanged. passwd: /etc/master.passwd: unchanged    (0 (B (0 (B                      This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure  keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue!  Enter one line of random characters.    ****************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************     Enter one line of random characters.  (0 (BThey should contain at last 256 bits of randomness, as in 256 coin tosses, (0 (B 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are (0 (B able to copy & paste output from another machine into this installer) the  output from running the following command on another machine whose randomness  you trust:   dd if=/dev/random bs=32 count=1 | openssl base64   A line of any length and content will be accepted and assumed to contain at  least 256 bits of randomness. If it actually contains less, the installed  system may not be secure.               (0 (B (0 (B                     Configure the additional items as needed.    a: Configure network configure b: Timezone UTC c: Root shell /bin/sh d: Change root password ***EMPTY*** e: Enable installation of binary packages install f: Fetch and unpack pkgsrc install g: Enable sshd NO h: Enable ntpd NO i: Run ntpdate at boot NO j: Enable multicast DNS support NO k: Enable xdm NO l: Enable cgd YES m: Enable lvm NO n: Enable raidframe YES o: Add a user >x: Finished configuring  The installation of NetBSD-10.99.4 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot.   At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values.          (0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(B          (0 (B (0 (B                    Status: RunningCommand: /sbin/umount /targetroot/ (0qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B  (0 (B               Finished   (0 (B (0 (B                    [ 224.6532156] dk0 at xbd0 (b96a1d1e-92a6-411e-8209-5e066cdd9f7e) deleted [ 224.6532156] dk0: detached NetBSD/i386 10.99.4 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key.   Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-10.99.4 Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Install NetBSD to hard disk>x: Exit Install System [?25h# halt halted by root xl \ destroy \ anita-9518 Wed May 24 13:37:43 MEST 2023 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/HEAD/202305230430Z/i386/ xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-9115"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/download/i386/binary/kernel/netbsd-XEN3PAE_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-HEAD-202305230430Z-i386-+a4c35/tests-results.img,xvdb,w'"'"']' child pid is 7751 Parsing config from /dev/null [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.4 (XEN3PAE_DOMU) #0: Tue May 23 00:31:42 UTC 2023 [ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/XEN3PAE_DOMU [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 492 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] hypervisor0 at mainbus0: Xen version 4.13.2nb0 [ 1.0000000] vcpu0 at hypervisor0 [ 1.0000000] vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu0: node 0, package 0, core 0, smt 0 [ 1.0000000] vcpu1 at hypervisor0 [ 1.0000000] vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb [ 1.0000000] vcpu1: node 0, package 0, core 0, smt 0 [ 1.0000000] xenbus0 at hypervisor0: Xen Virtual Bus Interface [ 1.0000000] xencons0 at hypervisor0: Xen Virtual Console Driver [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0200936] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.0300739] xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface [ 1.0400780] xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface [ 1.0501681] xbd0: 2048 MB, 512 bytes/sect x 4194304 sectors [ 1.0501681] xbd0: backend features 0x1 [ 1.0600734] balloon0 at xenbus0 id 0: Xen Balloon driver [ 1.0600734] balloon0: current reservation: 524288 KiB [ 1.4300884] dk0 at xbd0: "b96a1d1e-92a6-411e-8209-5e066cdd9f7e", 3669888 blocks at 64, type: ffs [ 1.4300884] dk1 at xbd0: "c981aa45-e442-476d-ab1e-8333461b04d0", 524288 blocks at 3669952, type: swap [ 1.4400859] xbd1: 100 MB, 512 bytes/sect x 204800 sectors [ 1.4400859] xbd1: backend features 0x1 [ 1.4500846] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.4500846] balloon0: current reservation: 131072 pages => target: 131072 pages [ 1.4600814] xenbus0: can't get state for device/suspend/event-channel (2) [ 1.4600814] WARNING: 3 errors while detecting hardware; check system log. [ 1.4600814] boot device: dk0 [ 1.4600814] root on dk0 dumps on dk1 [ 1.5600778] root file system type: ffs [ 1.5600778] kern.module.path=/stand/i386/10.99.4/modules Wed May 24 11:38:13 UTC 2023 Starting root file system check: /dev/rdk0: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/dk1 swapctl: adding /dev/dk1 as swap device at priority 0 Starting file system checks: [ 40.0500887] entropy: ready Loaded entropy from /var/db/entropy-file. Setting tty flags. Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured Starting syslogd. Mounting all file systems... Clearing temporary files. Creating a.out runtime link editor directory cache. Checking quotas: done. swapctl: setting dump device to /dev/dk1 Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting powerd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. May 24 11:39:19 postfix[1151]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Wed May 24 11:39:20 UTC 2023 May 24 11:39:20 getty[1240]: /dev/ttyE1: Device not configured May 24 11:39:20 getty[1279]: /dev/ttyE2: Device not configured May 24 11:39:20 getty[1201]: /dev/ttyE3: Device not configured NetBSD/i386 (Amnesiac) (constty) login: NetBSD/i386 (Amnesiac) (constty) login: root May 24 11:39:22 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 10.99.4 (XEN3PAE_DOMU) #0: Tue May 23 00:31:42 UTC 2023 Welcome to NetBSD! This is a development snapshot of NetBSD for testing -- user beware! Bug reports: https://www.NetBSD.org/support/send-pr.html Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/ We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-pr''ompt-1684928363.19# ' anita-root-shell-prompt-1684928363.19# df -k | sed 's/^/df-pre-test /'; mkdir /t mp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee  /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt -o x ml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xs l /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css ; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` - lt 90000 && test ` 0xe [ 357.7535909] fatal page fault in supervisor mode [ 357.7535909] trap type 6 code 0x2 eip 0xc0136bfd cs 0x9 eflags 0x10202 cr2 0xf8826fff ilevel 0x8 esp 0xc06cc180 [ 357.7535909] curlwp 0xc3b49040 pid 15852 lid 15852 lowest kstack 0xd9b902c0 [ 357.7535909] Skipping crash dump on recursive panic [ 357.7535909] panic: trap [ 357.7535909] cpu1: Begin traceback... [ 357.7535909] vpanic(c05e907f,d9b92bb4,d9b92c74,c013c041,c05e907f,d9b92c80,d9b92c80,3dec,d9b902c0,10202) at netbsd:vpanic+0x17e [ 357.7535909] panic(c05e907f,d9b92c80,d9b92c80,3dec,d9b902c0,10202,f8826fff,8,c06cc180,8) at netbsd:panic+0x18 [ 357.7535909] trap() at netbsd:trap+0xce1 [ 357.7535909] --- trap (number 6) --- [ 357.7535909] dodumpsys(c3988d80,104,0,c013988d,8,c05f8155,5,0,0,1) at netbsd:dodumpsys+0x44d [ 357.7535909] dumpsys(104,0,c3b49040,c05e935a,5,d9b92d6c,c044bfec,104,0,0) at netbsd:dumpsys+0x14 [ 357.7535909] kern_reboot(104,0,0,0,c07fd500,c1669c00,2,d9b92d7c,c05a25a3,c05e14d8) at netbsd:kern_reboot+0x78 [ 357.7535909] vpanic(c05e14d8,d9b92d88,d9b92da0,c0429c20,c05e14d8,c05e1432,c05ea255,c06197e0,912,c19d8ec0) at netbsd:vpanic+0x18c [ 357.7535909] kern_assert(c05e14d8,c05e1432,c05ea255,c06197e0,912,c19d8ec0,c3988d84,d9b92dd8,c04fcd88,c1669c00) at netbsd:kern_assert+0x23 [ 357.7641763] config_detach(c1669c00,2,c1636000,c37c1a00,c04d9f85,0,0,80,0,c37c1a00) at netbsd:config_detach+0x70 [ 357.7641763] fss_close(a300,0,1,6000,c3b49040,0,c37c1a00,d9b92e1c,6000,0) at netbsd:fss_close+0x148 [ 357.8935930] spec_close(d9b92e2c,202,c05d9634,c37c1a00,1,c136e340,c37c1a00,1,0,d9b92e70) at netbsd:spec_close+0x2d5 [ 357.8935930] VOP_CLOSE(c37c1a00,1,c136e340,c16ed7f0,c16ed7f0,402c7413,c24f17c0,c24f17dc,d9b92e84,c04cee82) at netbsd:VOP_CLOSE+0x44 [ 357.8935930] vn_close(c37c1a00,1,c136e340,d9b92ec4,c03c860d,c24f17c0,c16ed7c0,0,0,0) at netbsd:vn_close+0x3a [ 357.8935930] vn_closefile(c24f17c0,c16ed7c0,0,0,0,d9b92eb0,2c,c16ed7c0,0,0) at netbsd:vn_closefile+0x22 [ 357.8935930] closef(c24f17c0,d9b92f9c,c013ba95,c1603d68,bb475000,2,0,c20f1980,c24f17c0,c16ed7c0) at netbsd:closef+0x9d [ 357.8935930] fd_close(3,0,c3b49040,c3b49040,c3b49040,d9b92f9c,c0130baf,c3b49040,d9b92f68,d9b92f60) at netbsd:fd_close+0x129 [ 357.8935930] sys_close(c3b49040,d9b92f68,d9b92f60,c0137b56,c1726600,c06c3eb8,d9b92f68,0,0,3) at netbsd:sys_close+0x22 [ 357.8935930] syscall() at netbsd:syscall+0x7f [ 357.8935930] --- syscall (number 6) --- [ 357.8935930] bb4e4627: [ 357.8935930] cpu1: End traceback... [ 357.8935930] rebooting... pexpect reported EOF - VMM exited unexpectedly exitstatus 0 signalstatus None xl \ destroy \ anita-9115 Wed May 24 13:44:29 MEST 2023