Mon Oct 31 02:26:14 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-744"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 10904 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3_DOMU) #0: Sat Oct 15 10:52:16 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU total memory = 256 MB avail memory = 233 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 1, core 1, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 2, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 262144 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 65536 pages => target: 65536 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs kern.module.path=/stand/amd64-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1638400 byte, 3168 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 544 (1792) 544 1114112 + / b: 256256 524288 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1248 MB, 12 free partitions. a: 544 (1792) 544 1114112 + / >b: 256 256 524288 swap  b: 256 256 524288 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1248 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1791 1792 FFSv2 Yes Yes / b: 1792 2047256 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1792.0MB (3670016 sectors) block size 16384, fragment size 2048 using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue                         Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23470 KiB 47.68 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA91% |******************************* | 45184 KiB 43.67 M00:00 ETA100****| 493302.8 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA23% |********46080 KiB 44.82 M00:03 ETA44*******866562.232 ETA5*** 104 MiB 34.8863****210.27*925.8670*342.412*719.636*458.12776.338*94.8986***6591 ETA92**77760 ETA5*813.972.997640100**| 19007 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 17.20 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA6912 KiB 6.71 M02:04 ETA1103045.045 ETA286886.0516 ETA3% |*329608.031:40 ETA494887.704 ETA549408.0239 ETA6% |**59264265 ETA8750729.1424 ETA9% |***805768.737 ETA109011295 ETA1 98 M982 ETA2% |****104714 ETA315871 ETA420623 ETA3237 ETA5*77.9430 ETA348829 ETA697231 ETA744596334 ETA8*51225 ETA96342 ETA20*766726 ETA180518 ETA4389 ETA282430 ETA93173*46.953 ETA6765 ETA2006847704 ETA9537 ETA511418 ETA2241 ETAprogress: writing 33280 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//amd64/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-744 Mon Oct 31 05:30:07 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210252220Z/amd64/ /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/download Creating hard disk image... done. xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-29104"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210252220Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 25172 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3_DOMU) #0: Sat Oct 15 10:52:16 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU total memory = 512 MB avail memory = 481 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 0, core 3, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 0, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 524288 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 131072 pages => target: 131072 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs kern.module.path=/stand/amd64-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1638400 byte, 3168 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 1056 (1536) 1056 2162688 + / b: 512512 1048576 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 480 MB, 12 free partitions. a: 1056 (1536) 1056 2162688 + / >b: 512 512 1048576 swap  b: 512 512 1048576 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 480 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1535 1536 FFSv2 Yes Yes / b: 1536 2047512 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1536.0MB (3145728 sectors) block size 16384, fragment size 2048 using 9 cylinder groups of 170.67MB, 10923 blks, 21184 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue RRIP without PX field?                         Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23470 KiB 57.06 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA4% |*2432 KiB 2.35 M00:19 ETA7% |**35841.7425 ETA26% |*********130564.208 ETA842083.469 ETA32**59361010 ETA8**91109 ETA47***23360257 ETA50*508803*6362.87*81607476*******378883.363 ETA9*90401782*40768062 ETA4*18562.9190**4544891 ETA3* | 4620817* | 48000750 ETA100**| 49330 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA25120 KiB 4.97 M00:37 ETA6% |**12806.2028 ETA865125.3632 ETA9% |***76644.2940 ETA10201603.923 ETA4% |****77764.5036 ETA82243.9341 ETA5*9632614 ETA29*****585606.3421 ETA52******** 100 MiB 9.9809 ETA444569******3110.975 ETA7043217 9.783*4033428.926*55578218*507.9080*3654 ETA7**67962 ETA93**78.071 ETA7.7248059** | 19600 ETA100*57 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 4.83 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA4800 KiB 4.66 M02:59 ETA68483.334:10 ETA83842.715:07 ETA1104325427 ETA57443.074:29 ETA27982.9142 ETA209281 ETA3232839 ETA3% |*6048280967357 ETA30848449448444 ETA400003.0027 ETA575523100 ETA6% |**52864443:49 ETA7472504 ETA9456419 ETA87224:03 ETAprogress: writing 33280 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//amd64/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-29104 Mon Oct 31 08:35:11 MET 2022