Thu Nov 3 23:54:10 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-15252"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 8358 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3_DOMU) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU total memory = 256 MB avail memory = 233 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 1, core 3, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 2, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 262144 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 65536 pages => target: 65536 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs kern.module.path=/stand/amd64-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1638400 byte, 3168 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 544 (1792) 544 1114112 + / b: 256256 524288 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1248 MB, 12 free partitions. a: 544 (1792) 544 1114112 + / >b: 256 256 524288 swap  b: 256 256 524288 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1248 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1791 1792 FFSv2 Yes Yes / b: 1792 2047256 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1792.0MB (3670016 sectors) block size 16384, fragment size 2048 using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue                         Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23470 KiB 29.89 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA88% |******************************43712 KiB 42.62 M00:00 ETA100*****| 4933036.84 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA18% |******35392 KiB 34.53 M00:04 ETA32*****637440.955******* 101 MiB 33.62 ETA9**1328.4163**204.03540.713 ETA9**3218.837167.006**46.242 ETA82**575.758**68301 ETA95***81120 ETA3.958*737100*| 19022 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 12.12 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA111392 KiB 11.02 M01:15 ETA7216 8.3638 ETA4% |*390409.4824 ETA5458888.949 ETA515203734 ETA6% |**52967.7042 ETA67686.9253 ETA8721927.8138 ETA507345 ETA6996.8252 ETA9% |***8528372:00 ETA108844631:54 ETA1 98 MiB 7.0046 ETA2% |****1026.818 ETA55951 ETA3147048 ETA75351 ETA49284 ETA20039 ETA35.882:02 ETA5*823174 ETA489 ETA6798 ETA4009 ETA743311 ETA6213 ETA7086 ETA5148*517 ETA94.9720*685.111 ETA184401 ETA29171:58 ETA3*409 ETA8362:00 ETA20224628153 ETA026 ETAprogress: writing 38400 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//amd64/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-15252 Fri Nov 4 02:58:18 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202210291350Z/amd64/ /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/download Creating hard disk image... done. xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-27731"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202210291350Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 4232 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3_DOMU) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU total memory = 512 MB avail memory = 481 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 1, core 0, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 2, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 524288 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 131072 pages => target: 131072 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs kern.module.path=/stand/amd64-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1638400 byte, 3168 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 1056 (1536) 1056 2162688 + / b: 512512 1048576 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 480 MB, 12 free partitions. a: 1056 (1536) 1056 2162688 + / >b: 512 512 1048576 swap  b: 512 512 1048576 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 480 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1535 1536 FFSv2 Yes Yes / b: 1536 2047512 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1536.0MB (3145728 sectors) block size 16384, fragment size 2048 using 9 cylinder groups of 170.67MB, 10923 blks, 21184 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue                         Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23470 KiB 64.60 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 49330 KiB 54.92 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA26% |*********52096 KiB 50.48 M00:02 ETA52********* 100 MiB 49.551 ETA79*********5250.570 ETA94*****8044.89100***| 191.90 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 25.12 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA4% |*41408 KiB 40.13 M00:19 ETA9% |***83520628 ETA11 100 MiB 33.4922 ETA2% |****726.917 ETA3163.3331 ETA4220.355 ETA5*3419.196 ETA687.3140 ETA9*607838 ETA20*86.8440 ETA735.792 ETA288681 ETA914.754 ETA3*2036463.736 ETA10158 ETA6*22087 ETA7332.976 ETA841687 ETA30*5236 ETA16525 ETA8207 ETA2*761.99385886 ETA491647 ETA5*9496305329038 ETA7120.789 ETA75793150 ETA8*21051 ETA6 9.892 ETA931732503 ETA7364 ETA40*41223*63560 ETA94473326178.91 ETA763 ETAprogress: writing 33280 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//amd64/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-27731 Fri Nov 4 06:01:13 MET 2022