Sat Nov 26 01:49:58 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/kernel/netbsd-XEN3_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-12979"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 13245 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3_DOMU) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU total memory = 256 MB avail memory = 233 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 0, core 1, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 1, core 2, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 262144 KiB xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs kern.module.path=/stand/amd64-xen/8.2/modules balloon0: current reservation: 65536 pages => target: 65536 pages warning: no /dev/console ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) Created tmpfs /dev (1638400 byte, 3168 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 544 (1792) 544 1114112 + / b: 256256 524288 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1248 MB, 12 free partitions. a: 544 (1792) 544 1114112 + / >b: 256 256 524288 swap  b: 256 256 524288 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1248 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1791 1792 FFSv2 Yes Yes / b: 1792 2047256 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1792.0MB (3670016 sectors) block size 16384, fragment size 2048 using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue                         Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 23470 KiB 59.08 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA74% |*************************36992 KiB 36.07 M00:00 ETA100**********| 493304.78 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA12% |****24896 KiB 24.22 M00:06 ETA51************* 99 MiB 32.912 ETA9***11328.2366***265.2071*372.838***491.271 ETA84**600.0891**7319.300 ETA9*** | 1898.93100*| 19041 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 19.38 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA7104 KiB 6.90 M02:00 ETA22329611.351:12 ETA3% |*326400.616 ETA5512642.4703 ETA7% |**6560070 ETA9% |***813443.230:57 ETA119516866 ETA2% |**** 107 M394 ETA42055*3492 ETA74648*571520*754649 ETA184173*99318 ETA4208026*23157 ETA734046 ETA9*51204 ETA316433 ETA2*76172 ETA49091 ETA42.812 ETA6*310951 ETA8*263.0439 ETA9332.8141*523.057 ETA242.648 ETA4*7916 ETA6*8835 ETA796784 ETA9*4173.052 ETA92.703 ETA52*3891 ETA35220 ETA5*66429 ETA7833.067 ETA62.8060**5073.05 ETA22183 ETA92.894 ETA4*473.032 ETA7*66161 ETA72.899659*8670 ETA719919 ETA2*61268 ETA42557 ETA5*33676 ETA6415 ETA75558*6544 ETA80*773 ETAprogress: writing 65536 bytes to output pipe: Interrupted system call tar: End of archive volume 1 reached tar: Signal caught, cleaning up. Command failedHit enter to continue                         There was an error in extracting the file /mnt2//amd64/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-12979 Sat Nov 26 04:54:22 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211202200Z/amd64/ /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/download Creating hard disk image... done. xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-11027"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/download/amd64/binary/kernel/netbsd-INSTALL_XEN3_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211202200Z-amd64-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 1206 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3_DOMU) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3_DOMU total memory = 512 MB avail memory = 481 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 1, core 0, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 3, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 524288 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 131072 pages => target: 131072 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b Your machine does not initialize mem_clusters; sparse_dumps disabled root file system type: ffs kern.module.path=/stand/amd64-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1638400 byte, 3168 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/amd64 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 1056 (1536) 1056 2162688 + / b: 512512 1048576 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 480 MB, 12 free partitions. a: 1056 (1536) 1056 2162688 + / >b: 512 512 1048576 swap  b: 512 512 1048576 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 480 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1535 1536 FFSv2 Yes Yes / b: 1536 2047512 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1536.0MB (3145728 sectors) block size 16384, fragment size 2048 using 9 cylinder groups of 170.67MB, 10923 blks, 21184 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /amd64/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue                         Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA13% |****3136 KiB 3.03 M00:06 ETA21***49922.427 ETA5*60161.958 ETA30**7232765**8256609 ETA41**9664578 ETA4*10560455****2992586 ETA72******7024843 ETA81***907262 ETA94**** | 22080950 ETA100***| 23470 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA1832 KiB 826.6100:58 ETA5% |*2880 KiB 1.40 M32 ETA8% |**3968284 ETA27% |*********1353.3010 ETA30*49122.91 ETA4****98403.2208 ETA6**229121951*5216077 ETA79**********391684.242 ETA84**41664061 ETA7*33283.8490*4416613* | 46208460 ETA5* | 4710428100**| 493309 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/base.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA8% |**17152 KiB 16.58 M00:10 ETA9% |***8048 8.769 ETA1122527.2823 ETA27% |*********5350412.9910 ETA40*****788485.3307 ETA65******** 124 MiB 20.683 ETA7*818.278306.229*24.757163.594 ETA2*92.653411.7420.976*540 9.711068.625 ETA8*9279517.9483**824 ETA461693 ETA7*65593**77711 ETA5*81578*700 ETA100*| 19046 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA16553663.601:05 ETA100% |***********************************| 4200 KiB 2.68 M0:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//amd64/binary/sets/comp.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA6272 KiB 6.09 M02:17 ETA76803.743:43 ETA1992214:19 ETA12416035 ETA6572315 ETA279842.9142 ETA926685:06 ETA3450 ETA95096:33 ETAprogress: writing 33280 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//amd64/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-11027 Sat Nov 26 07:59:33 MET 2022