Tue Nov 8 04:58:51 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 256M \ install \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/ Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/misc/pxeboot_ia32.bin... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot-com1.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot2.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot3.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot4.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot5.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot6.fs... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/installation/cdrom/boot-com.iso... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/kern-GENERIC.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/modules.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/base.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/etc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/comp.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/gpufw.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/misc.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/tests.tgz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/download Creating hard disk image... done. Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/kernel/netbsd-XEN3PAE_DOMU.gz... OK Downloading http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz... OK xl \ create \ -c /dev/null \ memory=256 \ 'name="anita-2199"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/download/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 935 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3PAE_DOMU) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3PAE_DOMU total memory = 256 MB avail memory = 238 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 1, core 3, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 1, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 262144 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 65536 pages => target: 65536 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386pae-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1687552 byte, 3264 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/i386 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 544 (1792) 544 1114112 + / b: 256256 524288 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1248 MB, 12 free partitions. a: 544 (1792) 544 1114112 + / >b: 256 256 524288 swap  b: 256 256 524288 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1248 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1791 1792 FFSv2 Yes Yes / b: 1792 2047256 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1792.0MB (3670016 sectors) block size 16384, fragment size 2048 using 10 cylinder groups of 179.20MB, 11469 blks, 22272 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue RRIP without PX field?                         Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 19240 KiB 40.65 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 42370 KiB 52.22 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA25% |********40576 KiB 39.37 M00:02 ETA6*2120.525 ETA7403214.307 ETA852481.0210 ETA9*7040 9.171 ETA3082567.843 ETA196646.925 ETA2*5190336 ETA440165.857 ETA6*856071760032328 ETA61*********969607.8807 ETA29392463* 98 M0541006.678 ETA6*2417412855.8770*871110522*233331645017 ETA6*84.9279799*2216 ETA80*4627544*3115 ETA6*3464 ETA7537progress: writing 65536 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//i386/binary/sets/base.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-2199 Tue Nov 8 08:03:17 MET 2022 This is anita version 2.10 Using pexpect version 4.8.0 /usr/home/bouyer/anita/anita \ --test-timeout 4500 \ --vmm xl \ --xen-type pv \ --vmm-args vcpus=2 \ --disk-size 2G \ --memory-size 512M \ test \ http://ftp.fr.netbsd.org/pub/NetBSD-daily/netbsd-8/202211020500Z/i386/ /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/install_tmp.iso \ /domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/download Creating hard disk image... done. xl \ create \ -c /dev/null \ memory=512 \ 'name="anita-8673"' \ 'kernel="/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/download/i386/binary/kernel/netbsd-INSTALL_XEN3PAE_DOMU.gz"' \ vcpus=2 \ 'disk=['"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/wd0.img,xvda,w'"'"','"'"'file:/domains/tests-dir/anita/work-pv/work-http---ftp.fr.netbsd.org-pub-NetBSD-daily-netbsd-8-202211020500Z-i386-+a4c35c48/install_tmp.iso,xvdb,r'"'"']' child pid is 7633 Parsing config from /dev/null Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.2_STABLE (INSTALL_XEN3PAE_DOMU) #0: Thu Oct 27 16:19:25 UTC 2022 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/xen/compile/INSTALL_XEN3PAE_DOMU total memory = 512 MB avail memory = 489 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) hypervisor0 at mainbus0: Xen version 4.13.2nb0 vcpu0 at hypervisor0 vcpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu0: package 0, core 0, smt 0 vcpu1 at hypervisor0 vcpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz, id 0x6fb vcpu1: package 0, core 1, smt 0 xenbus0 at hypervisor0: Xen Virtual Bus Interface xencons0 at hypervisor0: Xen Virtual Console Driver xenbus: can't get state for device/suspend/event-channel (2) xbd0 at xenbus0 id 51712: Xen Virtual Block Device Interface xbd1 at xenbus0 id 51728: Xen Virtual Block Device Interface balloon0 at xenbus0 id 0: Xen Balloon driver balloon0: current reservation: 524288 KiB xenbus: can't get state for device/suspend/event-channel (2) balloon0: current reservation: 131072 pages => target: 131072 pages ignore shutdown request: xenbus: can't get state for device/suspend/event-channel (2) boot device: xbd0 root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386pae-xen/8.2/modules warning: no /dev/console Created tmpfs /dev (1687552 byte, 3264 inodes) erase ^?, werase ^W, kill ^U, intr ^C )0)0[?25h                                                                         NetBSD/i386 8.2_STABLE This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>a: Installation messages in English(0x(B(0x(B b: Messages d'installation en français (0x(B(0x(B c: Installation auf Deutsch(0x(B(0x(B d: Komunikaty instalacyjne w jezyku polskim (0x(B(0x(B e: Mensajes de instalacion en castellano (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B  Thank you for using NetBSD! (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B NetBSD-8.2_STABLE Install System(0x(B(0x(B(0x(B(0x(B>a: Install NetBSD to hard disk(0x(B(0x(B b: Upgrade NetBSD on a hard disk(0x(B(0x(B c: Re-install sets or install additional sets (0x(B(0x(B d: Reboot the computer(0x(B(0x(B e: Utility menu(0x(B(0x(B f: Config menu(0x(B(0x(B x: Exit Install System(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration  (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)  Shall we continue?(0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                      On which disk do you want to install NetBSD?(0lqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Available disks(0x(B(0x(B(0x(B(0x(B>a: xbd0(0x(B(0x(B b: xbd1(0x(B(0x(B c: Extended partitioning (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqj(B                          NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 2048 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Choose your installation(0x(B(0x(B(0x(B(0x(B>a: Set sizes of NetBSD partitions(0x(B(0x(B b: Use existing partition sizes (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.  Free space will be added to the partition marked with a '+'.    MBCylinders Sectors Filesystem >a: 1056 (1536) 1056 2162688 + / b: 512512 1048576 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 480 MB, 12 free partitions. a: 1056 (1536) 1056 2162688 + / >b: 512 512 1048576 swap  b: 512 512 1048576 swap >c: 0 0 0 /tmp (tmpfs)  c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr  d: 0 0 0 /usr >e: 0 0 0 /var  e: 0 0 0 /var >f: 0 0 0 /home  f: 0 0 0 /home >g: Add a user defined partition  g: Add a user defined partition >h: Change input units (sectors/cylinders/MB)  h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 480 MB, 12 free partitions.  We now have your BSD disklabel partitions as: This is your last chance to change them.            Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1535 1536 FFSv2 Yes Yes / b: 1536 2047512 swap c:0 2047 2048 NetBSD partition d:0 2047 2048 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok  Please enter a name for your NetBSD disk          [xbd0]:                          Ok, we are now ready to install NetBSD on your hard disk (xbd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? (0lqqqqqqqqqqqqqqqk(B(0x(B yes or no? (0x(B(0x(B(0x(B(0x(B>a: No(0x(B(0x(B b: Yes(0x(B(0mqqqqqqqqqqqqqqqj(B a: No>b: Yes                        Status: RunningCommand: disklabel -w -r -f /tmp/disktab xbd0 'xbd0' --------------------------------------------------------------------------------Finished                                                Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rxbd0a --------------------------------------------------------------------------------/dev/rxbd0a: 1536.0MB (3145728 sectors) block size 16384, fragment size 2048 using 9 cylinder groups of 170.67MB, 10923 blks, 21184 inodes. ...............................................................................Finished                         Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:BIOS console(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Bootblocks selection (0x(B(0x(B(0x(B(0x(B>a: Use BIOS console(0x(B(0x(B b: Use serial port com0 (0x(B(0x(B c: Use serial port com1 (0x(B(0x(B d: Use serial port com2 (0x(B(0x(B e: Use serial port com3 (0x(B(0x(B f: Set serial baud rate (0x(B(0x(B g: Use existing bootblocks (0x(B(0x(B x: Exit(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Use BIOS console>b: Use serial port com0 b: Use serial port com0>x: Exit Installing boot blocks on xbd0....                            Status: RunningCommand: /usr/sbin/installboot -o console=pc,speed=9600 /dev/rxbd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished                         The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Select your distribution (0x(B(0x(B(0x(B(0x(B>a: Full installation(0x(B(0x(B b: Installation without X11 (0x(B(0x(B c: Minimal installation (0x(B(0x(B d: Custom installation (0x(B(0x(B x: Abandon installation (0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B a: Full installation>d: Custom installationDDDD The following is the list of distribution sets that will be used.    Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes  e: Compiler tools Yes >h: Miscellaneous No Yes  h: Miscellaneous Yes >i: Test programs No Yes  i: Test programs Yes >k: X11 sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: X11 base and clientsNo (0x(B(0x(B b: X11 programmingNo (0x(B(0x(B c: X11 configurationNo (0x(B(0x(B d: X11 fonts No (0x(B(0x(B e: X11 serversNo (0x(B(0x(B f: Select all the above sets(0x(B(0x(B g: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets None (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B a: Kernel sourcesNo (0x(B(0x(B b: Base sourcesNo (0x(B(0x(B c: Share sourcesNo (0x(B(0x(B d: GNU sourcesNo (0x(B(0x(B e: X11 sourcesNo (0x(B(0x(B f: Debug symbolsNo (0x(B(0x(B g: X11 debug symbolsNo (0x(B(0x(B h: Select all the above sets(0x(B(0x(B i: Deselect all the above sets (0x(B(0x(B>x: Install selected sets(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets                          Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. (0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B Install from(0x(B(0x(B(0x(B(0x(B>a: CD-ROM / DVD / install image media(0x(B(0x(B b: HTTP(0x(B(0x(B c: FTP(0x(B(0x(B d: NFS(0x(B(0x(B e: Floppy(0x(B(0x(B f: Unmounted fs(0x(B(0x(B g: Local directory(0x(B(0x(B h: Skip set(0x(B(0x(B i: Skip set group(0x(B(0x(B j: Abandon installation(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B     Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files.  >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue(0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(Bdevice[cd0a]: xbd1d    a: Device xbd1d b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device xbd1d >x: Continue RRIP without PX field?                         Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 19240 KiB 69.88 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 42370 KiB 51.79 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA39% |*************63360 KiB 61.40 M00:01 ETA7************** 123 M360 ETA100********| 15453.52 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4200 KiB 42.18 M00:00 Finished                                                Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA10% |***50496 KiB 48.94 M00:09 ETA23% |******** 114 MiB 57.256 ETA6*2942.978 ETA73634.0810 ETA84128.212 ETA9*44.14 ETA3081.196 ETA5118.957 ETA157.219 ETA75.6921 ETA2*604.552 ETA343.673 ETA472.885 ETA7016 ETA5*41.637 ETA67088 ETA800.599 ETA721130 ETA40**2005527 ETA8**381.931 ETA41479*3052 ETA53*62390 ETA504470.695*71451 ETA41767 9.8978162412 ETA4168.883 ETAprogress: writing 33280 bytes to output pipe: Interrupted system call Command failedHit enter to continue                         There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?(0lqqqqqqqqqqqqqqqqqqqqqqqk(B(0x(B>Hit enter to continue(0x(B(0mqqqqqqqqqqqqqqqqqqqqqqqj(Bxl \ destroy \ anita-8673 Tue Nov 8 11:05:57 MET 2022