source: trunk/softs/tsar_boot/io_drivers/sdcard.h @ 279

Last change on this file since 279 was 276, checked in by bouyer, 12 years ago

A boot loader to be stored in ROM of a TSAR platform.
Based on Cesar FUGUET's work.
Platform-specific files are in a subdirectory, e.g. platform_fpga_de2-115,
so the same code can be targetted to different platforms.
The platform is selected with the PLATFORM_DIR environnement variable.
The supported variant are soclib and fpga, the later being the default
and the former selected by defining the SOCLIB environnement variable.
The boot loader embeds a binary device tree describing the platform,
to be used by the loaded software.

File size: 5.3 KB
Line 
1/**
2 * \file sdcard.h
3 * \date 30 August 2012
4 * \author Cesar fuguet <cesar.fuguet-tortolero@lip6.fr>
5 *
6 * This file defines the driver of a SD Card device using an SPI controller
7 */
8
9#ifndef SDCARD_H
10#define SDCARD_H
11
12#include <int-types.h>
13#include <spi.h>
14
15/**
16 * \brief SD Card type definition
17 */
18struct sdcard_dev
19{ 
20    /**
21     * SPI controller pointer
22     */
23    struct spi_dev * spi;
24
25    /**
26     * Capacity of the SDCARD in terms of bytes
27     */
28    size_t capacity;
29
30    /**
31     * Block length of the SDCARD
32     */
33    size_t block_length;
34
35    /**
36     * Access pointer representing the offset in bytes used
37     * to read or write in the SDCARD.
38     *
39     * \note this driver is for cards SDSD, therefore this offset
40     *       must be multiple of the block length
41     */ 
42    off_t  access_pointer;
43
44    /**
45     * Slave ID. This ID represents the number of the slave select signal
46     * used in the hardware platform
47     */
48    int    slave_id;
49};
50
51/**
52 * \param   sdcard  : uninitialized pointer. This parameter will contain
53 *                    a pointer to the initialized block device or NULL otherwise
54 * \param   spi     : initialized pointer to the spi controller
55 * \param   ss      : slave select signal number
56 *
57 * \return  0 when initialization succeeds or an error code value otherwise.
58 *          The error codes are defined in this header file.
59 *
60 * \brief   Initialize the block device
61 */
62int sdcard_dev_open(struct sdcard_dev * sdcard, struct spi_dev * spi, int ss);
63
64/**
65 * \param   sdcard  : Pointer to the initialized block device
66 * \param   buf     : Pointer to a memory segment wherein store
67 * \param   count   : number of bytes to read
68 *
69 * \return  0 when read succeeds or an error code value otherwise.
70 *          The error codes are defined in this header file.
71 *
72 * \brief   Read in the block device
73 *
74 * The read is made in the current block device access pointer.
75 * In the read succeeds, the block device access pointer is
76 * relocated to the next block.
77 */
78int sdcard_dev_read(struct sdcard_dev * sdcard, void * buf, size_t count);
79
80/**
81 * \param   sdcard  : Pointer to the initialized block device
82 * \param   buf     : Pointer to a memory segment wherein the
83 * \param   count   : number of blocks to write
84 *
85 * \return  0 when write succeeds or an error code value otherwise.
86 *          The error codes are defined in this header file.
87 *
88 * \brief   Write in the block device
89 *
90 * The write is made in the current block device access pointer.
91 * In the write succeeds, the block device access pointer is
92 * relocated to the next block.
93 */
94size_t sdcard_dev_write(struct sdcard_dev * sdcard, void * buf, size_t count);
95
96/**
97 * \param   sdcard  : Pointer to the initialized block device
98 * \param   pos     : Position where the block device access
99 *                    pointer must be move
100 *
101 * \return  void
102 *
103 * \brief   Change block device access pointer position
104 * 
105 * The block device access pointer is relocated in terms of blocks
106 */
107void sdcard_dev_lseek(struct sdcard_dev * sdcard, size_t pos);
108
109/**
110 * \param   sdcard  : Pointer to the initialized block device
111 *
112 * \return  block device capacity
113 *
114 * \brief   Get the block device capacity
115 *
116 * The block device access pointer is relocated in terms of blocks
117 */
118size_t sdcard_dev_get_capacity(struct sdcard_dev * sdcard);
119
120/**
121 * \param   sdcard  : Pointer to the initialized block device
122 * \param   len     : Block device length to set
123 *
124 * \return  0 when succeed or error code value otherwise
125 *
126 * \brief   Set the block length of the device
127 */
128int sdcard_dev_set_blocklen(struct sdcard_dev * sdcard, size_t len);
129
130/**
131 * SD Card constants
132 */
133
134/** Number of retries after an unacknowledge command */
135#define SDCARD_COMMAND_TIMEOUT      100
136
137/** This command is a simple SD commmand */
138#define SDCARD_CMD                  0
139
140/** This is an application specific command */
141#define SDCARD_ACMD                 1
142
143/** The transmition is done in the negative edge of the clock */
144#define SDCARD_TX_NEGEDGE           0
145
146/** The transmition is done in the positive edge of the clock */
147#define SDCARD_TX_POSEDGE           1
148
149/** The reception is done in the negative edge of the clock */
150#define SDCARD_RX_NEGEDGE           0
151
152/** The reception is done in the positive edge of the clock */
153#define SDCARD_RX_POSEDGE           1
154
155/**
156 * SD Card macros
157 */
158
159/** Check if the response is valid */
160#define SDCARD_CHECK_R1_VALID(x)    (~x & SDCARD_R1_RSP_VALID) ? 1 : 0
161
162/**
163 * Check if there is an error in the response
164 *
165 * \note this macro must be used after verify that the response is
166 *       valid
167 */
168#define SDCARD_CHECK_R1_ERROR(x)    ( x & 0x7E)                ? 1 : 0
169
170/**
171 * SD Card Response 1 (R1) format constants
172 */
173#define SDCARD_R1_IN_IDLE_STATE     ( 1 << 0 ) /**< \brief R1 bit 0 */
174#define SDCARD_R1_ERASE_RESET       ( 1 << 1 ) /**< \brief R1 bit 1 */
175#define SDCARD_R1_ILLEGAL_CMD       ( 1 << 2 ) /**< \brief R1 bit 2 */
176#define SDCARD_R1_COM_CRC_ERR       ( 1 << 3 ) /**< \brief R1 bit 3 */
177#define SDCARD_R1_ERASE_SEQ_ERR     ( 1 << 4 ) /**< \brief R1 bit 4 */
178#define SDCARD_R1_ADDRESS_ERR       ( 1 << 5 ) /**< \brief R1 bit 5 */
179#define SDCARD_R1_PARAMETER_ERR     ( 1 << 6 ) /**< \brief R1 bit 6 */
180#define SDCARD_R1_RSP_VALID         ( 1 << 7 ) /**< \brief R1 bit 7 */
181
182#endif
183
184/*
185 * vim: tabstop=4 : shiftwidth=4 : expandtab : softtabstop=4
186 */
Note: See TracBrowser for help on using the repository browser.